Template autodiscovers trunks via snmp v2c and system information.
You only need to add {$SNMP_COMMUNITY} in hosts macros
Bogdan Vaschenko
There are no macros links in this template.
There are no template links in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Trunk Discovery | <p>-</p> | SNMP agent |
sTrunks<p>Update: 1m</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Wan Status | <p>-</p> | SNMP agent |
sWanStatus<p>Update: 1m</p> |
| Lan IP address | <p>-</p> | SNMP agent |
sLanIpaddress<p>Update: 30m</p> |
| Cpu Load | <p>-</p> | SNMP agent |
avgCpuLoad<p>Update: 30s</p> |
| Wan Subnet Mask | <p>-</p> | SNMP agent |
sWanSubnetMask<p>Update: 30m</p> |
| Disk Usage | <p>-</p> | SNMP agent |
sDiskUsage<p>Update: 5m</p> |
| Lan Subnet Mask | <p>-</p> | SNMP agent |
sLanSubnetMask<p>Update: 30m</p> |
| Firmware Version | <p>-</p> | SNMP agent |
sFirmwareVersion<p>Update: 5m</p> |
| Memory Usage | <p>-</p> | SNMP agent |
sMemoryUsage<p>Update: 1m</p> |
| Hardware Version | <p>-</p> | SNMP agent |
sHardwareVersion<p>Update: 5m</p> |
| Uptime | <p>-</p> | SNMP agent |
sUptime<p>Update: 1m</p> |
| Serial Number | <p>-</p> | SNMP agent |
sSerialNumber<p>Update: 5m</p> |
| Lan GateWay | <p>-</p> | SNMP agent |
sLanGateWay<p>Update: 30m</p> |
| Lan Status | <p>-</p> | SNMP agent |
sLanStatus<p>Update: 1m</p> |
| Wan IP address | <p>-</p> | SNMP agent |
sWanIpaddress<p>Update: 30m</p> |
| Wan GateWay | <p>-</p> | SNMP agent |
sWanGateWay<p>Update: 30m</p> |
| Trunk {#TRUNK_NAME} Status | <p>-</p> | SNMP agent |
sTrunksStatus[{#TRUNK_INDEX}]<p>Update: 1m</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| {HOSTNAME} Trunk {#TRUNK_NAME} changed status | <p>-</p> | <p>Expression: {Yeastar S300:sTrunksStatus[{#TRUNK_INDEX}].diff()}=1</p><p>Recovery expression: </p> | high |
| {HOSTNAME} Trunk {#TRUNK_NAME} changed status (LLD) | <p>-</p> | <p>Expression: {Yeastar S300:sTrunksStatus[{#TRUNK_INDEX}].diff()}=1</p><p>Recovery expression: </p> | high |
Template autodiscovers trunks via snmp v2c and system information.
You only need to add {$SNMP_COMMUNITY} in hosts macros
Bogdan Vaschenko
There are no macros links in this template.
There are no template links in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Trunk Discovery | <p>-</p> | SNMP agent |
sTrunks<p>Update: 1m</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Lan IP address | <p>-</p> | SNMP agent |
sLanIpaddress<p>Update: 30m</p> |
| Cpu Load | <p>-</p> | SNMP agent |
avgCpuLoad<p>Update: 30s</p> |
| Lan GateWay | <p>-</p> | SNMP agent |
sLanGateWay<p>Update: 30m</p> |
| Lan Status | <p>-</p> | SNMP agent |
sLanStatus<p>Update: 1m</p> |
| Wan GateWay | <p>-</p> | SNMP agent |
sWanGateWay<p>Update: 30m</p> |
| Wan IP address | <p>-</p> | SNMP agent |
sWanIpaddress<p>Update: 30m</p> |
| Hardware Version | <p>-</p> | SNMP agent |
sHardwareVersion<p>Update: 5m</p> |
| Uptime | <p>-</p> | SNMP agent |
sUptime<p>Update: 1m</p> |
| Serial Number | <p>-</p> | SNMP agent |
sSerialNumber<p>Update: 5m</p> |
| Disk Usage | <p>-</p> | SNMP agent |
sDiskUsage<p>Update: 5m</p> |
| Firmware Version | <p>-</p> | SNMP agent |
sFirmwareVersion<p>Update: 5m</p> |
| Wan Status | <p>-</p> | SNMP agent |
sWanStatus<p>Update: 1m</p> |
| Wan Subnet Mask | <p>-</p> | SNMP agent |
sWanSubnetMask<p>Update: 30m</p> |
| Memory Usage | <p>-</p> | SNMP agent |
sMemoryUsage<p>Update: 1m</p> |
| Lan Subnet Mask | <p>-</p> | SNMP agent |
sLanSubnetMask<p>Update: 30m</p> |
| Trunk {#TRUNK_NAME} Status | <p>-</p> | SNMP agent |
sTrunksStatus[{#TRUNK_INDEX}]<p>Update: 1m</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| {HOSTNAME} Trunk {#TRUNK_NAME} changed status | <p>-</p> | <p>Expression: (last(/Yeastar S300/sTrunksStatus[{#TRUNK_INDEX}],#1)<>last(/Yeastar S300/sTrunksStatus[{#TRUNK_INDEX}],#2))=1</p><p>Recovery expression: </p> | high |
| {HOSTNAME} Trunk {#TRUNK_NAME} changed status (LLD) | <p>-</p> | <p>Expression: (last(/Yeastar S300/sTrunksStatus[{#TRUNK_INDEX}],#1)<>last(/Yeastar S300/sTrunksStatus[{#TRUNK_INDEX}],#2))=1</p><p>Recovery expression: </p> | high |
Template autodiscovers trunks via snmp v2c and system information.
You only need to add {$SNMP_COMMUNITY} in hosts macros
Bogdan Vaschenko
There are no macros links in this template.
There are no template links in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Trunk Discovery | <p>-</p> | SNMP agent |
sTrunks<p>Update: 1m</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Lan IP address | <p>-</p> | SNMP agent |
sLanIpaddress<p>Update: 30m</p> |
| Cpu Load | <p>-</p> | SNMP agent |
avgCpuLoad<p>Update: 30s</p> |
| Lan GateWay | <p>-</p> | SNMP agent |
sLanGateWay<p>Update: 30m</p> |
| Lan Status | <p>-</p> | SNMP agent |
sLanStatus<p>Update: 1m</p> |
| Wan GateWay | <p>-</p> | SNMP agent |
sWanGateWay<p>Update: 30m</p> |
| Wan IP address | <p>-</p> | SNMP agent |
sWanIpaddress<p>Update: 30m</p> |
| Hardware Version | <p>-</p> | SNMP agent |
sHardwareVersion<p>Update: 5m</p> |
| Uptime | <p>-</p> | SNMP agent |
sUptime<p>Update: 1m</p> |
| Serial Number | <p>-</p> | SNMP agent |
sSerialNumber<p>Update: 5m</p> |
| Disk Usage | <p>-</p> | SNMP agent |
sDiskUsage<p>Update: 5m</p> |
| Firmware Version | <p>-</p> | SNMP agent |
sFirmwareVersion<p>Update: 5m</p> |
| Wan Status | <p>-</p> | SNMP agent |
sWanStatus<p>Update: 1m</p> |
| Wan Subnet Mask | <p>-</p> | SNMP agent |
sWanSubnetMask<p>Update: 30m</p> |
| Memory Usage | <p>-</p> | SNMP agent |
sMemoryUsage<p>Update: 1m</p> |
| Lan Subnet Mask | <p>-</p> | SNMP agent |
sLanSubnetMask<p>Update: 30m</p> |
| Trunk {#TRUNK_NAME} Status | <p>-</p> | SNMP agent |
sTrunksStatus[{#TRUNK_INDEX}]<p>Update: 1m</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| {HOSTNAME} Trunk {#TRUNK_NAME} changed status | <p>-</p> | <p>Expression: (last(/Yeastar S300/sTrunksStatus[{#TRUNK_INDEX}],#1)<>last(/Yeastar S300/sTrunksStatus[{#TRUNK_INDEX}],#2))=1</p><p>Recovery expression: </p> | high |
| {HOSTNAME} Trunk {#TRUNK_NAME} changed status (LLD) | <p>-</p> | <p>Expression: (last(/Yeastar S300/sTrunksStatus[{#TRUNK_INDEX}],#1)<>last(/Yeastar S300/sTrunksStatus[{#TRUNK_INDEX}],#2))=1</p><p>Recovery expression: </p> | high |