Storage NBU 5240 SNMP Trap Template in Chinese.
State of the fan(风扇控制器状态).
Power Supply AC Status(电源制器状态) .
The Fibre Channel links state(光纤连接状态).
State of the System temperature(控制器温度状态).
…
ZhangQi
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| 电源制器状态 | <p>Status is Power Supply AC lost the redundant power supply is not functional. State is Warning the power supply works abnormal</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.4”]<p>Update: 0</p> |
| RIAD Group 状态 | <p>State is Warning The diskgroup has warning State is Failed the RAID group is failed</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.9”]<p>Update: 0</p> |
| 控制器温度状态 | <p>State is Warning System temperature warning</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.6”]<p>Update: 0</p> |
| 风扇控制器状态 | <p>State is Warning the fan is running slower than the low threshold of 1715 rpm. State is Failed the fan is missing or has failed.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.3”]<p>Update: 0</p> |
| 存储柜磁盘状态 | <p>State is Warning, and the Status is Unconfigured (Good) the disk is in a foreign, unsupported state. The disk may have been reinserted and caused an error； State is Failed, and the Status is Unconfigured (Bad) the disk is failed</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.13”]<p>Update: 0</p> |
| CPU 状态 | <p>Status is NULL the firmware was unable to report the current status; State is Failed status of the CPU is unknown.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.7”]<p>Update: 0</p> |
| 存储柜风扇状态 | <p>State is Warning the fan is running slower than the low threshold of 2000 rpm. State is Failed the fan is missing or has failed.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.10”]<p>Update: 0</p> |
| 磁盘控制器状态 | <p>State is Warning the disk is in a foreign, unsupported state; State is Failed the disk is no longer functional.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.8”]<p>Update: 0</p> |
| 光纤连接状态 | <p>If you receive an alert, it means that one or more of the Fibre Channel links is not in an optimal state.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.5”]<p>Update: 0</p> |
| 存储柜工作温度异常状态 | <p>State is Warning the temperature is warning</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.12”]<p>Update: 0</p> |
| RAID 控制卡状态 | <p>Status is NOT OK the adapter has failed； BBU Status is NOT OK & current Charge is NULL the firmware was unable to report the current charge.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.14”]<p>Update: 0</p> |
| 磁盘分区状态 | <p>If you receive an alert, it means that partition has experienced an error.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.21”]<p>Update: 0</p> |
| 存储柜电源状态 | <p>If you receive an alert, it means that one of the power supplies has experienced an error.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.11”]<p>Update: 0</p> |
| PCI卡状态 | <p>If you receive an alert, it means that one or more of the PCIe cards are not installed in the correct slots, or a PCIe card is not functional.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.16”]<p>Update: 0</p> |
There are no triggers in this template.
Storage NBU 5240 SNMP Trap Template in Chinese.
State of the fan(风扇控制器状态).
Power Supply AC Status(电源制器状态) .
The Fibre Channel links state(光纤连接状态).
State of the System temperature(控制器温度状态).
…
ZhangQi
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| 控制器温度状态 | <p>State is Warning System temperature warning</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.6”]<p>Update: 0</p> |
| 电源制器状态 | <p>Status is Power Supply AC lost the redundant power supply is not functional. State is Warning the power supply works abnormal</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.4”]<p>Update: 0</p> |
| PCI卡状态 | <p>If you receive an alert, it means that one or more of the PCIe cards are not installed in the correct slots, or a PCIe card is not functional.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.16”]<p>Update: 0</p> |
| 存储柜风扇状态 | <p>State is Warning the fan is running slower than the low threshold of 2000 rpm. State is Failed the fan is missing or has failed.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.10”]<p>Update: 0</p> |
| RAID 控制卡状态 | <p>Status is NOT OK the adapter has failed； BBU Status is NOT OK & current Charge is NULL the firmware was unable to report the current charge.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.14”]<p>Update: 0</p> |
| 存储柜磁盘状态 | <p>State is Warning, and the Status is Unconfigured (Good) the disk is in a foreign, unsupported state. The disk may have been reinserted and caused an error； State is Failed, and the Status is Unconfigured (Bad) the disk is failed</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.13”]<p>Update: 0</p> |
| RIAD Group 状态 | <p>State is Warning The diskgroup has warning State is Failed the RAID group is failed</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.9”]<p>Update: 0</p> |
| 磁盘控制器状态 | <p>State is Warning the disk is in a foreign, unsupported state; State is Failed the disk is no longer functional.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.8”]<p>Update: 0</p> |
| CPU 状态 | <p>Status is NULL the firmware was unable to report the current status; State is Failed status of the CPU is unknown.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.7”]<p>Update: 0</p> |
| 光纤连接状态 | <p>If you receive an alert, it means that one or more of the Fibre Channel links is not in an optimal state.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.5”]<p>Update: 0</p> |
| 磁盘分区状态 | <p>If you receive an alert, it means that partition has experienced an error.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.21”]<p>Update: 0</p> |
| 存储柜电源状态 | <p>If you receive an alert, it means that one of the power supplies has experienced an error.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.11”]<p>Update: 0</p> |
| 风扇控制器状态 | <p>State is Warning the fan is running slower than the low threshold of 1715 rpm. State is Failed the fan is missing or has failed.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.3”]<p>Update: 0</p> |
| 存储柜工作温度异常状态 | <p>State is Warning the temperature is warning</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.12”]<p>Update: 0</p> |
There are no triggers in this template.
Storage NBU 5240 SNMP Trap Template in Chinese.
State of the fan(风扇控制器状态).
Power Supply AC Status(电源制器状态) .
The Fibre Channel links state(光纤连接状态).
State of the System temperature(控制器温度状态).
…
ZhangQi
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| 控制器温度状态 | <p>State is Warning System temperature warning</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.6”]<p>Update: 0</p> |
| 电源制器状态 | <p>Status is Power Supply AC lost the redundant power supply is not functional. State is Warning the power supply works abnormal</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.4”]<p>Update: 0</p> |
| PCI卡状态 | <p>If you receive an alert, it means that one or more of the PCIe cards are not installed in the correct slots, or a PCIe card is not functional.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.16”]<p>Update: 0</p> |
| 存储柜风扇状态 | <p>State is Warning the fan is running slower than the low threshold of 2000 rpm. State is Failed the fan is missing or has failed.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.10”]<p>Update: 0</p> |
| RAID 控制卡状态 | <p>Status is NOT OK the adapter has failed； BBU Status is NOT OK & current Charge is NULL the firmware was unable to report the current charge.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.14”]<p>Update: 0</p> |
| 存储柜磁盘状态 | <p>State is Warning, and the Status is Unconfigured (Good) the disk is in a foreign, unsupported state. The disk may have been reinserted and caused an error； State is Failed, and the Status is Unconfigured (Bad) the disk is failed</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.13”]<p>Update: 0</p> |
| RIAD Group 状态 | <p>State is Warning The diskgroup has warning State is Failed the RAID group is failed</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.9”]<p>Update: 0</p> |
| 磁盘控制器状态 | <p>State is Warning the disk is in a foreign, unsupported state; State is Failed the disk is no longer functional.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.8”]<p>Update: 0</p> |
| CPU 状态 | <p>Status is NULL the firmware was unable to report the current status; State is Failed status of the CPU is unknown.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.7”]<p>Update: 0</p> |
| 光纤连接状态 | <p>If you receive an alert, it means that one or more of the Fibre Channel links is not in an optimal state.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.5”]<p>Update: 0</p> |
| 磁盘分区状态 | <p>If you receive an alert, it means that partition has experienced an error.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.21”]<p>Update: 0</p> |
| 存储柜电源状态 | <p>If you receive an alert, it means that one of the power supplies has experienced an error.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.11”]<p>Update: 0</p> |
| 风扇控制器状态 | <p>State is Warning the fan is running slower than the low threshold of 1715 rpm. State is Failed the fan is missing or has failed.</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.3”]<p>Update: 0</p> |
| 存储柜工作温度异常状态 | <p>State is Warning the temperature is warning</p> | SNMP trap |
snmptrap[“1.3.6.1.4.1.393.3.9.1.12”]<p>Update: 0</p> |
There are no triggers in this template.