The template is based on the “BDT-MS-MIB” (Version 201702211500Z). The SNMP capabilities of the libaries are pretty limited. All possible values are being checked and triggers are being used.
Features
Template was tested with a NEOxl 80 and Firmware 2.80.
Marcel Wiechmann
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
| Template Module Generic SNMP |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| BDT Module Discovery | <p>-</p> | SNMP agent |
BdtDeviceStatModEntry<p>Update: 1d</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Device Robotic FW Revision | <p>-</p> | SNMP agent |
bdtDeviceDatRoboticSWRev<p>Update: 1h</p> |
| Device Robotic HW Revision | <p>-</p> | SNMP agent |
bdtDeviceDatRoboticHWRev<p>Update: 1h</p> |
| Current Device Activity | <p>-</p> | SNMP agent |
bdtDeviceStatAct<p>Update: 5m</p> |
| Device World Wide ID | <p>-</p> | SNMP agent |
bdtDeviceDatWWI<p>Update: 1h</p> |
| Device SW Revision | <p>-</p> | SNMP agent |
bdtDeviceDatSWRevision<p>Update: 1h</p> |
| Device Serial Number | <p>-</p> | SNMP agent |
bdtDeviceDatSerialNum<p>Update: 1h</p> |
| Current Device Health Status | <p>-</p> | SNMP agent |
bdtDeviceStatHealth<p>Update: 5m</p> |
| Device SW Build Date | <p>-</p> | SNMP agent |
bdtDeviceDatSWBuildDate<p>Update: 1h</p> |
| Current Module {#SNMPINDEX} Drive Power Module 1 Status | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryDPwr1[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Current Module {#SNMPINDEX} Drive Power Module 2 Status | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryDPwr2[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Current Module {#SNMPINDEX} Health Stat | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryHealth[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Current Module {#SNMPINDEX} Power Supply Status | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryPwrSupply[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| Drive Power Module 1 Status of Module {#MODULE_ID} is NOT ok | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr1[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Drive Power Module 2 Status of Module {#MODULE_ID} is NOT ok | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr2[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Power Supply Status of Module {#MODULE_ID} is NOT ok | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryPwrSupply[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Drive Power Module 1 Status of Module {#MODULE_ID} is NOT ok (LLD) | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr1[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Drive Power Module 2 Status of Module {#MODULE_ID} is NOT ok (LLD) | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr2[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Power Supply Status of Module {#MODULE_ID} is NOT ok (LLD) | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryPwrSupply[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
The template is based on the “BDT-MS-MIB” (Version 201702211500Z). The SNMP capabilities of the libaries are pretty limited. All possible values are being checked and triggers are being used.
Features
Template was tested with a NEOxl 80 and Firmware 2.80.
Marcel Wiechmann
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
| Template Module Generic SNMP |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| BDT Module Discovery | <p>-</p> | SNMP agent |
BdtDeviceStatModEntry<p>Update: 1d</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Device Robotic FW Revision | <p>-</p> | SNMP agent |
bdtDeviceDatRoboticSWRev<p>Update: 1h</p> |
| Device Robotic HW Revision | <p>-</p> | SNMP agent |
bdtDeviceDatRoboticHWRev<p>Update: 1h</p> |
| Current Device Activity | <p>-</p> | SNMP agent |
bdtDeviceStatAct<p>Update: 5m</p> |
| Device World Wide ID | <p>-</p> | SNMP agent |
bdtDeviceDatWWI<p>Update: 1h</p> |
| Device SW Revision | <p>-</p> | SNMP agent |
bdtDeviceDatSWRevision<p>Update: 1h</p> |
| Device Serial Number | <p>-</p> | SNMP agent |
bdtDeviceDatSerialNum<p>Update: 1h</p> |
| Current Device Health Status | <p>-</p> | SNMP agent |
bdtDeviceStatHealth<p>Update: 5m</p> |
| Device SW Build Date | <p>-</p> | SNMP agent |
bdtDeviceDatSWBuildDate<p>Update: 1h</p> |
| Current Module {#SNMPINDEX} Drive Power Module 1 Status | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryDPwr1[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Current Module {#SNMPINDEX} Drive Power Module 2 Status | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryDPwr2[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Current Module {#SNMPINDEX} Health Stat | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryHealth[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Current Module {#SNMPINDEX} Power Supply Status | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryPwrSupply[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| Drive Power Module 1 Status of Module {#MODULE_ID} is NOT ok | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr1[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Drive Power Module 2 Status of Module {#MODULE_ID} is NOT ok | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr2[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Power Supply Status of Module {#MODULE_ID} is NOT ok | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryPwrSupply[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Drive Power Module 1 Status of Module {#MODULE_ID} is NOT ok (LLD) | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr1[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Drive Power Module 2 Status of Module {#MODULE_ID} is NOT ok (LLD) | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr2[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Power Supply Status of Module {#MODULE_ID} is NOT ok (LLD) | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryPwrSupply[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
The template is based on the “BDT-MS-MIB” (Version 201702211500Z). The SNMP capabilities of the libaries are pretty limited. All possible values are being checked and triggers are being used.
Features
Template was tested with a NEOxl 80 and Firmware 2.80.
Marcel Wiechmann
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
| Template Module Generic SNMP |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| BDT Module Discovery | <p>-</p> | SNMP agent |
BdtDeviceStatModEntry<p>Update: 1d</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Device Robotic FW Revision | <p>-</p> | SNMP agent |
bdtDeviceDatRoboticSWRev<p>Update: 1h</p> |
| Device Robotic HW Revision | <p>-</p> | SNMP agent |
bdtDeviceDatRoboticHWRev<p>Update: 1h</p> |
| Current Device Activity | <p>-</p> | SNMP agent |
bdtDeviceStatAct<p>Update: 5m</p> |
| Device World Wide ID | <p>-</p> | SNMP agent |
bdtDeviceDatWWI<p>Update: 1h</p> |
| Device SW Revision | <p>-</p> | SNMP agent |
bdtDeviceDatSWRevision<p>Update: 1h</p> |
| Device Serial Number | <p>-</p> | SNMP agent |
bdtDeviceDatSerialNum<p>Update: 1h</p> |
| Current Device Health Status | <p>-</p> | SNMP agent |
bdtDeviceStatHealth<p>Update: 5m</p> |
| Device SW Build Date | <p>-</p> | SNMP agent |
bdtDeviceDatSWBuildDate<p>Update: 1h</p> |
| Current Module {#SNMPINDEX} Drive Power Module 1 Status | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryDPwr1[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Current Module {#SNMPINDEX} Drive Power Module 2 Status | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryDPwr2[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Current Module {#SNMPINDEX} Health Stat | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryHealth[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Current Module {#SNMPINDEX} Power Supply Status | <p>-</p> | SNMP agent |
bdtDeviceStatModEntryPwrSupply[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| Drive Power Module 1 Status of Module {#MODULE_ID} is NOT ok | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr1[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Drive Power Module 2 Status of Module {#MODULE_ID} is NOT ok | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr2[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Power Supply Status of Module {#MODULE_ID} is NOT ok | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryPwrSupply[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Drive Power Module 1 Status of Module {#MODULE_ID} is NOT ok (LLD) | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr1[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Drive Power Module 2 Status of Module {#MODULE_ID} is NOT ok (LLD) | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryDPwr2[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |
| Power Supply Status of Module {#MODULE_ID} is NOT ok (LLD) | <p>-</p> | <p>Expression: {Other - NeoXL:bdtDeviceStatModEntryPwrSupply[{#SNMPINDEX}].regexp(OK)}=0</p><p>Recovery expression: </p> | warning |