For Netapp Ontape 9.5 and later.
Discovery rules:
Based on “NETAPP ONTAP 9.1” edited by “zabbiJ”.
eric_at_2037
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
SnapMirror | <p>-</p> | SNMP agent |
snapmirror<p>Update: 300s</p> |
Enclosures | <p>-</p> | SNMP agent |
encl<p>Update: 12h</p> |
LIFs | <p>-</p> | SNMP agent |
lif<p>Update: 12h</p> |
Nodes | <p>-</p> | SNMP agent |
node<p>Update: 12h</p> |
Aggregates | <p>-</p> | SNMP agent |
aggr<p>Update: 12h</p> |
Volumes | <p>-</p> | SNMP agent |
volume<p>Update: 12h</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Number of spare Disks | <p>-</p> | SNMP agent |
diskSpareCount<p>Update: 30m</p> |
Autosupport Failed Sends | <p>-</p> | SNMP agent |
autosupportFailedSends<p>Update: 5m</p> |
CPU Count | <p>-</p> | SNMP agent |
cpuCount<p>Update: 30m</p> |
Autosupport Successful Sends | <p>-</p> | SNMP agent |
autosupportSuccessfulSends<p>Update: 5m</p> |
Number of Disks | <p>-</p> | SNMP agent |
diskTotalCount<p>Update: 30m</p> |
Autosupport Status | <p>-</p> | SNMP agent |
autosupportStatus<p>Update: 5m</p> |
Autosupport Status Message | <p>-</p> | SNMP agent |
autosupportStatusMessage<p>Update: 5m</p> |
Number of reconstructing parity Disks | <p>-</p> | SNMP agent |
diskReconstructingParityCount<p>Update: 1m</p> |
CPU usage (%) | <p>-</p> | SNMP agent |
cpuBusyTimePerCent<p>Update: 1m</p> |
Disk Failed Message | <p>-</p> | SNMP agent |
diskFailedMessage<p>Update: 1m</p> |
Prefailed Disks Count | <p>-</p> | SNMP agent |
diskPrefailedCount<p>Update: 1m</p> |
Product Version | <p>-</p> | SNMP agent |
productVersio<p>Update: 30m</p> |
Number of verifying parity Disks | <p>-</p> | SNMP agent |
diskVerifyingParityCount<p>Update: 1m</p> |
Failed Disks Count | <p>-</p> | SNMP agent |
diskFailedCount<p>Update: 1m</p> |
SnapMirror [{#SNAPINDEX}] Destination Path | <p>-</p> | SNMP agent |
snapmirrorRelDestPath[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
SnapMirror [{#SNAPINDEX}] Healthy | <p>-</p> | SNMP agent |
snapmirrorRelHealthy[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
SnapMirror [{#SNAPINDEX}] Lag | <p>-</p> | SNMP agent |
snapmirrorRelLag[{#SNMPINDEX}]<p>Update: 300s</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Last Transfer Size | <p>-</p> | SNMP agent |
snapmirrorRelLastTransferSize[{#SNMPINDEX}]<p>Update: 300s</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Last Transfer Time | <p>-</p> | SNMP agent |
snapmirrorRelLastTransferTime[{#SNMPINDEX}]<p>Update: 300s</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Source Path | <p>-</p> | SNMP agent |
snapmirrorRelSrcPath[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} State | <p>-</p> | SNMP agent |
snapmirrorRelState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Status | <p>-</p> | SNMP agent |
snapmirrorRelStatus[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Failed Electronic | <p>-</p> | SNMP agent |
enclElectronicsFailed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Temperature warn | <p>-</p> | SNMP agent |
enclTempSensorsOverTempWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Voltage fail | <p>-</p> | SNMP agent |
enclVoltSensorsUnderVoltFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Voltage warn | <p>-</p> | SNMP agent |
enclVoltSensorsOverVoltWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Voltage fail | <p>-</p> | SNMP agent |
enclVoltSensorsOverVoltFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Current Voltage | <p>-</p> | SNMP agent |
enclVoltSensorsCurrentVolt[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Temperature warn | <p>-</p> | SNMP agent |
enclTempSensorsUnderTempWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Temperature fail | <p>-</p> | SNMP agent |
enclTempSensorsUnderTempFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Temperature fail | <p>-</p> | SNMP agent |
enclTempSensorsOverTempFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Electronic | <p>-</p> | SNMP agent |
enclElectronicsPresent[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Current Temperature | <p>-</p> | SNMP agent |
enclTempSensorsCurrentTemp[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Product Model | <p>-</p> | SNMP agent |
enclProductModel[{#SNMPINDEX}]<p>Update: 12h</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Product ID | <p>-</p> | SNMP agent |
enclProductID[{#SNMPINDEX}]<p>Update: 12h</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Failed Power Supplies | <p>-</p> | SNMP agent |
enclPowerSuppliesFailed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Fans Speed | <p>-</p> | SNMP agent |
enclFansSpeed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Failed Fans | <p>-</p> | SNMP agent |
enclFansFailed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Voltage warn | <p>-</p> | SNMP agent |
enclVoltSensorsUnderVoltWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
VIF[{#VIF}] is Home | <p>-</p> | SNMP agent |
logicalInterfaceIsHome[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] cannot take over cause | <p>-</p> | SNMP agent |
haCannotTakeoverCause[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA Interconnect Status | <p>-</p> | SNMP agent |
haInterconnectStatus[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA Partner Name | <p>-</p> | SNMP agent |
haPartnerName[{#NODENAME}]<p>Update: 12h</p><p>LLD</p> |
Node[{#NODENAME}] HA Partner Status | <p>-</p> | SNMP agent |
haPartnerStatus[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA Settings | <p>-</p> | SNMP agent |
haSettings[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA State | <p>-</p> | SNMP agent |
haState[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Aggregate Owners[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrOwners[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate Raidtype[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrRaidType[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate State[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Aggregate Status[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrStatus[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Aggregate Type[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrType[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate Size[{#AGGRNAME}] | <p>-</p> | SNMP agent |
df64TotalKBytes[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate Used Size[{#AGGRNAME}] | <p>-</p> | SNMP agent |
df64UsedKBytes[{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
Aggregate Size Free (%)[{#AGGRNAME}] | <p>-</p> | SNMP agent |
dfPerCentKBytesCapacity[{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
Aggregate Filesystem Status[{#AGGRNAME}] | <p>-</p> | SNMP agent |
dfStatus[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Size | <p>-</p> | SNMP agent |
df64TotalKBytesVol[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Used | <p>-</p> | SNMP agent |
df64UsedKBytesVol[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Used (%) | <p>-</p> | SNMP agent |
dfPerCentKBytesCapacityVol[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Used Inode % | <p>-</p> | SNMP agent |
dfVolInodePercent[{#SNMPINDEX}]<p>Update: 10m</p><p>LLD</p> |
Volume[{#VOLNAME}] Aggregate | <p>-</p> | SNMP agent |
volAggrName[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] NV Failed State | <p>Indicates whether the volume is in nvfailed state. This is only applicable to cluster-mode volumes.</p> | SNMP agent |
volInNvfailedState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Language | <p>-</p> | SNMP agent |
volLanguage[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] NV Failed enabled | <p>Indicates whether nvfail option is enabled on this volume.</p> | SNMP agent |
volNvfail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Space Guarantee enabled | <p>.</p> | SNMP agent |
volSpaceGuaranteeEnabled[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] Space Guarantee | <p>.</p> | SNMP agent |
volSpaceGuarantee[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] State | <p>-</p> | SNMP agent |
volState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Type | <p>Type of this volume, older volumes are traditional while newer volumes contained in aggregates are flexible.</p> | SNMP agent |
volType[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] Vserver | <p>-</p> | SNMP agent |
volVserver[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
Filesystem {#AGGRNAME} not mounted | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfStatus[{#SNMPINDEX}].last()}<>2</p><p>Recovery expression: </p> | average |
Free Size on {#AGGRNAME} less than 10% | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfPerCentKBytesCapacity[{#SNMPINDEX}].last()}<10</p><p>Recovery expression: </p> | high |
Free Size on {#AGGRNAME} less than 20% | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfPerCentKBytesCapacity[{#SNMPINDEX}].last()}<20</p><p>Recovery expression: </p> | average |
Failed electric: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] | <p>-</p> | <p>Expression: {SNMP NetApp cDot:enclElectronicsFailed[{#SNMPINDEX}].strlen()}>0</p><p>Recovery expression: </p> | high |
Failed fans: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] | <p>-</p> | <p>Expression: {SNMP NetApp cDot:enclFansFailed[{#SNMPINDEX}].strlen()}>0</p><p>Recovery expression: </p> | high |
Failed power supply: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] | <p>-</p> | <p>Expression: {SNMP NetApp cDot:enclPowerSuppliesFailed[{#SNMPINDEX}].strlen()}>0</p><p>Recovery expression: </p> | high |
LIF[{#VIF}] on {HOST.NAME} not at home port | <p>-</p> | <p>Expression: {SNMP NetApp cDot:logicalInterfaceIsHome[{#SNMPINDEX}].last()}>1</p><p>Recovery expression: </p> | average |
{HOST.HOST} can not takeover | <p>-</p> | <p>Expression: {SNMP NetApp cDot:haState[{#NODENAME}].last()}<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} HA disabled | <p>-</p> | <p>Expression: {SNMP NetApp cDot:haSettings[{#NODENAME}].last()}<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} Interconnect status not up | <p>-</p> | <p>Expression: {SNMP NetApp cDot:haInterconnectStatus[{#NODENAME}].last()}<>4</p><p>Recovery expression: </p> | average |
{HOST.HOST} Partner status not ok | <p>-</p> | <p>Expression: {SNMP NetApp cDot:haPartnerStatus[{#NODENAME}].last()}<>2</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] is not Healthy | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelHealthy[{#SNMPINDEX}].last()}<>1</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 1 day | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelLag[{#SNMPINDEX}].last()}>86400</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] Lag is greater than 2 days | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelLag[{#SNMPINDEX}].last()}>172800</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 5 days | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelLag[{#SNMPINDEX}].last()}>432000</p><p>Recovery expression: </p> | disaster |
SnapMirror {#SNAPINDEX} is having problems | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelStatus[{#SNMPINDEX}].last()}>=11</p><p>Recovery expression: </p> | high |
SnapMirror {#SNAPINDEX} is not idle | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelStatus[{#SNMPINDEX}].last()}<>0</p><p>Recovery expression: </p> | information |
Free Inode on Volume[{#VOLNAME}] less than 10% | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfVolInodePercent[{#SNMPINDEX}].last()}>89</p><p>Recovery expression: </p> | disaster |
Free Inode on Volume[{#VOLNAME}] less than 25% | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfVolInodePercent[{#SNMPINDEX}].last()}>84</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 10% | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfPerCentKBytesCapacityVol[{#SNMPINDEX}].last()}>90</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 20% | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfPerCentKBytesCapacityVol[{#SNMPINDEX}].last()}>80</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] is not Healthy (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelHealthy[{#SNMPINDEX}].last()}<>1</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 1 day (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelLag[{#SNMPINDEX}].last()}>86400</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] Lag is greater than 2 days (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelLag[{#SNMPINDEX}].last()}>172800</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 5 days (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelLag[{#SNMPINDEX}].last()}>432000</p><p>Recovery expression: </p> | disaster |
SnapMirror {#SNAPINDEX} is having problems (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelStatus[{#SNMPINDEX}].last()}>=11</p><p>Recovery expression: </p> | high |
SnapMirror {#SNAPINDEX} is not idle (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:snapmirrorRelStatus[{#SNMPINDEX}].last()}<>0</p><p>Recovery expression: </p> | information |
Failed electric: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:enclElectronicsFailed[{#SNMPINDEX}].strlen()}>0</p><p>Recovery expression: </p> | high |
Failed fans: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:enclFansFailed[{#SNMPINDEX}].strlen()}>0</p><p>Recovery expression: </p> | high |
Failed power supply: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:enclPowerSuppliesFailed[{#SNMPINDEX}].strlen()}>0</p><p>Recovery expression: </p> | high |
LIF[{#VIF}] on {HOST.NAME} not at home port (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:logicalInterfaceIsHome[{#SNMPINDEX}].last()}>1</p><p>Recovery expression: </p> | average |
{HOST.HOST} can not takeover (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:haState[{#NODENAME}].last()}<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} HA disabled (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:haSettings[{#NODENAME}].last()}<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} Interconnect status not up (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:haInterconnectStatus[{#NODENAME}].last()}<>4</p><p>Recovery expression: </p> | average |
{HOST.HOST} Partner status not ok (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:haPartnerStatus[{#NODENAME}].last()}<>2</p><p>Recovery expression: </p> | average |
Filesystem {#AGGRNAME} not mounted (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfStatus[{#SNMPINDEX}].last()}<>2</p><p>Recovery expression: </p> | average |
Free Size on {#AGGRNAME} less than 10% (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfPerCentKBytesCapacity[{#SNMPINDEX}].last()}<10</p><p>Recovery expression: </p> | high |
Free Size on {#AGGRNAME} less than 20% (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfPerCentKBytesCapacity[{#SNMPINDEX}].last()}<20</p><p>Recovery expression: </p> | average |
Free Inode on Volume[{#VOLNAME}] less than 10% (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfVolInodePercent[{#SNMPINDEX}].last()}>89</p><p>Recovery expression: </p> | disaster |
Free Inode on Volume[{#VOLNAME}] less than 25% (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfVolInodePercent[{#SNMPINDEX}].last()}>84</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 10% (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfPerCentKBytesCapacityVol[{#SNMPINDEX}].last()}>90</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 20% (LLD) | <p>-</p> | <p>Expression: {SNMP NetApp cDot:dfPerCentKBytesCapacityVol[{#SNMPINDEX}].last()}>80</p><p>Recovery expression: </p> | average |
For Netapp Ontape 9.5 and later.
Discovery rules:
Based on “NETAPP ONTAP 9.1” edited by “zabbiJ”.
eric_at_2037
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Enclosures | <p>-</p> | SNMP agent |
encl<p>Update: 12h</p> |
Nodes | <p>-</p> | SNMP agent |
node<p>Update: 12h</p> |
SnapMirror | <p>-</p> | SNMP agent |
snapmirror<p>Update: 300s</p> |
LIFs | <p>-</p> | SNMP agent |
lif<p>Update: 12h</p> |
Volumes | <p>-</p> | SNMP agent |
volume<p>Update: 12h</p> |
Aggregates | <p>-</p> | SNMP agent |
aggr<p>Update: 12h</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Number of Disks | <p>-</p> | SNMP agent |
diskTotalCount<p>Update: 30m</p> |
Autosupport Failed Sends | <p>-</p> | SNMP agent |
autosupportFailedSends<p>Update: 5m</p> |
Number of reconstructing parity Disks | <p>-</p> | SNMP agent |
diskReconstructingParityCount<p>Update: 1m</p> |
Autosupport Status Message | <p>-</p> | SNMP agent |
autosupportStatusMessage<p>Update: 5m</p> |
Number of verifying parity Disks | <p>-</p> | SNMP agent |
diskVerifyingParityCount<p>Update: 1m</p> |
Number of spare Disks | <p>-</p> | SNMP agent |
diskSpareCount<p>Update: 30m</p> |
Failed Disks Count | <p>-</p> | SNMP agent |
diskFailedCount<p>Update: 1m</p> |
Prefailed Disks Count | <p>-</p> | SNMP agent |
diskPrefailedCount<p>Update: 1m</p> |
Disk Failed Message | <p>-</p> | SNMP agent |
diskFailedMessage<p>Update: 1m</p> |
Product Version | <p>-</p> | SNMP agent |
productVersio<p>Update: 30m</p> |
Autosupport Status | <p>-</p> | SNMP agent |
autosupportStatus<p>Update: 5m</p> |
CPU usage (%) | <p>-</p> | SNMP agent |
cpuBusyTimePerCent<p>Update: 1m</p> |
Autosupport Successful Sends | <p>-</p> | SNMP agent |
autosupportSuccessfulSends<p>Update: 5m</p> |
CPU Count | <p>-</p> | SNMP agent |
cpuCount<p>Update: 30m</p> |
Enclosure[{#ENCLNUM}] Failed Electronic | <p>-</p> | SNMP agent |
enclElectronicsFailed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Temperature warn | <p>-</p> | SNMP agent |
enclTempSensorsOverTempWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Voltage fail | <p>-</p> | SNMP agent |
enclVoltSensorsUnderVoltFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Voltage warn | <p>-</p> | SNMP agent |
enclVoltSensorsOverVoltWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Voltage fail | <p>-</p> | SNMP agent |
enclVoltSensorsOverVoltFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Current Voltage | <p>-</p> | SNMP agent |
enclVoltSensorsCurrentVolt[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Temperature warn | <p>-</p> | SNMP agent |
enclTempSensorsUnderTempWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Temperature fail | <p>-</p> | SNMP agent |
enclTempSensorsUnderTempFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Temperature fail | <p>-</p> | SNMP agent |
enclTempSensorsOverTempFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Electronic | <p>-</p> | SNMP agent |
enclElectronicsPresent[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Current Temperature | <p>-</p> | SNMP agent |
enclTempSensorsCurrentTemp[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Product Model | <p>-</p> | SNMP agent |
enclProductModel[{#SNMPINDEX}]<p>Update: 12h</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Product ID | <p>-</p> | SNMP agent |
enclProductID[{#SNMPINDEX}]<p>Update: 12h</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Failed Power Supplies | <p>-</p> | SNMP agent |
enclPowerSuppliesFailed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Fans Speed | <p>-</p> | SNMP agent |
enclFansSpeed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Failed Fans | <p>-</p> | SNMP agent |
enclFansFailed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Voltage warn | <p>-</p> | SNMP agent |
enclVoltSensorsUnderVoltWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] cannot take over cause | <p>-</p> | SNMP agent |
haCannotTakeoverCause[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA Interconnect Status | <p>-</p> | SNMP agent |
haInterconnectStatus[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA Partner Name | <p>-</p> | SNMP agent |
haPartnerName[{#NODENAME}]<p>Update: 12h</p><p>LLD</p> |
Node[{#NODENAME}] HA Partner Status | <p>-</p> | SNMP agent |
haPartnerStatus[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA Settings | <p>-</p> | SNMP agent |
haSettings[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA State | <p>-</p> | SNMP agent |
haState[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
SnapMirror [{#SNAPINDEX}] Destination Path | <p>-</p> | SNMP agent |
snapmirrorRelDestPath[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
SnapMirror [{#SNAPINDEX}] Healthy | <p>-</p> | SNMP agent |
snapmirrorRelHealthy[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
SnapMirror [{#SNAPINDEX}] Lag | <p>-</p> | SNMP agent |
snapmirrorRelLag[{#SNMPINDEX}]<p>Update: 300s</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Last Transfer Size | <p>-</p> | SNMP agent |
snapmirrorRelLastTransferSize[{#SNMPINDEX}]<p>Update: 300s</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Last Transfer Time | <p>-</p> | SNMP agent |
snapmirrorRelLastTransferTime[{#SNMPINDEX}]<p>Update: 300s</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Source Path | <p>-</p> | SNMP agent |
snapmirrorRelSrcPath[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} State | <p>-</p> | SNMP agent |
snapmirrorRelState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Status | <p>-</p> | SNMP agent |
snapmirrorRelStatus[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
VIF[{#VIF}] is Home | <p>-</p> | SNMP agent |
logicalInterfaceIsHome[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Size | <p>-</p> | SNMP agent |
df64TotalKBytesVol[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Used | <p>-</p> | SNMP agent |
df64UsedKBytesVol[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Used (%) | <p>-</p> | SNMP agent |
dfPerCentKBytesCapacityVol[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Used Inode % | <p>-</p> | SNMP agent |
dfVolInodePercent[{#SNMPINDEX}]<p>Update: 10m</p><p>LLD</p> |
Volume[{#VOLNAME}] Aggregate | <p>-</p> | SNMP agent |
volAggrName[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] NV Failed State | <p>Indicates whether the volume is in nvfailed state. This is only applicable to cluster-mode volumes.</p> | SNMP agent |
volInNvfailedState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Language | <p>-</p> | SNMP agent |
volLanguage[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] NV Failed enabled | <p>Indicates whether nvfail option is enabled on this volume.</p> | SNMP agent |
volNvfail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Space Guarantee enabled | <p>.</p> | SNMP agent |
volSpaceGuaranteeEnabled[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] Space Guarantee | <p>.</p> | SNMP agent |
volSpaceGuarantee[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] State | <p>-</p> | SNMP agent |
volState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Type | <p>Type of this volume, older volumes are traditional while newer volumes contained in aggregates are flexible.</p> | SNMP agent |
volType[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] Vserver | <p>-</p> | SNMP agent |
volVserver[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Aggregate Owners[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrOwners[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate Raidtype[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrRaidType[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate State[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Aggregate Status[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrStatus[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Aggregate Type[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrType[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate Size[{#AGGRNAME}] | <p>-</p> | SNMP agent |
df64TotalKBytes[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate Used Size[{#AGGRNAME}] | <p>-</p> | SNMP agent |
df64UsedKBytes[{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
Aggregate Size Free (%)[{#AGGRNAME}] | <p>-</p> | SNMP agent |
dfPerCentKBytesCapacity[{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
Aggregate Filesystem Status[{#AGGRNAME}] | <p>-</p> | SNMP agent |
dfStatus[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
Filesystem {#AGGRNAME} not mounted | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfStatus[{#SNMPINDEX}])<>2</p><p>Recovery expression: </p> | average |
Free Size on {#AGGRNAME} less than 10% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacity[{#SNMPINDEX}])<10</p><p>Recovery expression: </p> | high |
Free Size on {#AGGRNAME} less than 20% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacity[{#SNMPINDEX}])<20</p><p>Recovery expression: </p> | average |
Failed electric: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclElectronicsFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
Failed fans: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclFansFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
Failed power supply: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclPowerSuppliesFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
LIF[{#VIF}] on {HOST.NAME} not at home port | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/logicalInterfaceIsHome[{#SNMPINDEX}])>1</p><p>Recovery expression: </p> | average |
{HOST.HOST} can not takeover | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haState[{#NODENAME}])<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} HA disabled | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haSettings[{#NODENAME}])<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} Interconnect status not up | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haInterconnectStatus[{#NODENAME}])<>4</p><p>Recovery expression: </p> | average |
{HOST.HOST} Partner status not ok | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haPartnerStatus[{#NODENAME}])<>2</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] is not Healthy | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelHealthy[{#SNMPINDEX}])<>1</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 1 day | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>86400</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] Lag is greater than 2 days | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>172800</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 5 days | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>432000</p><p>Recovery expression: </p> | disaster |
SnapMirror {#SNAPINDEX} is having problems | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelStatus[{#SNMPINDEX}])>=11</p><p>Recovery expression: </p> | high |
SnapMirror {#SNAPINDEX} is not idle | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelStatus[{#SNMPINDEX}])<>0</p><p>Recovery expression: </p> | information |
Free Inode on Volume[{#VOLNAME}] less than 10% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfVolInodePercent[{#SNMPINDEX}])>89</p><p>Recovery expression: </p> | disaster |
Free Inode on Volume[{#VOLNAME}] less than 25% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfVolInodePercent[{#SNMPINDEX}])>84</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 10% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacityVol[{#SNMPINDEX}])>90</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 20% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacityVol[{#SNMPINDEX}])>80</p><p>Recovery expression: </p> | average |
Failed electric: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] (LLD) | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclElectronicsFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
Failed fans: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] (LLD) | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclFansFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
Failed power supply: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] (LLD) | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclPowerSuppliesFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
{HOST.HOST} can not takeover (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haState[{#NODENAME}])<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} HA disabled (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haSettings[{#NODENAME}])<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} Interconnect status not up (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haInterconnectStatus[{#NODENAME}])<>4</p><p>Recovery expression: </p> | average |
{HOST.HOST} Partner status not ok (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haPartnerStatus[{#NODENAME}])<>2</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] is not Healthy (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelHealthy[{#SNMPINDEX}])<>1</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 1 day (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>86400</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] Lag is greater than 2 days (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>172800</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 5 days (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>432000</p><p>Recovery expression: </p> | disaster |
SnapMirror {#SNAPINDEX} is having problems (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelStatus[{#SNMPINDEX}])>=11</p><p>Recovery expression: </p> | high |
SnapMirror {#SNAPINDEX} is not idle (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelStatus[{#SNMPINDEX}])<>0</p><p>Recovery expression: </p> | information |
LIF[{#VIF}] on {HOST.NAME} not at home port (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/logicalInterfaceIsHome[{#SNMPINDEX}])>1</p><p>Recovery expression: </p> | average |
Free Inode on Volume[{#VOLNAME}] less than 10% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfVolInodePercent[{#SNMPINDEX}])>89</p><p>Recovery expression: </p> | disaster |
Free Inode on Volume[{#VOLNAME}] less than 25% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfVolInodePercent[{#SNMPINDEX}])>84</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 10% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacityVol[{#SNMPINDEX}])>90</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 20% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacityVol[{#SNMPINDEX}])>80</p><p>Recovery expression: </p> | average |
Filesystem {#AGGRNAME} not mounted (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfStatus[{#SNMPINDEX}])<>2</p><p>Recovery expression: </p> | average |
Free Size on {#AGGRNAME} less than 10% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacity[{#SNMPINDEX}])<10</p><p>Recovery expression: </p> | high |
Free Size on {#AGGRNAME} less than 20% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacity[{#SNMPINDEX}])<20</p><p>Recovery expression: </p> | average |
For Netapp Ontape 9.5 and later.
Discovery rules:
Based on “NETAPP ONTAP 9.1” edited by “zabbiJ”.
eric_at_2037
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Enclosures | <p>-</p> | SNMP agent |
encl<p>Update: 12h</p> |
Nodes | <p>-</p> | SNMP agent |
node<p>Update: 12h</p> |
SnapMirror | <p>-</p> | SNMP agent |
snapmirror<p>Update: 300s</p> |
LIFs | <p>-</p> | SNMP agent |
lif<p>Update: 12h</p> |
Volumes | <p>-</p> | SNMP agent |
volume<p>Update: 12h</p> |
Aggregates | <p>-</p> | SNMP agent |
aggr<p>Update: 12h</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Number of Disks | <p>-</p> | SNMP agent |
diskTotalCount<p>Update: 30m</p> |
Autosupport Failed Sends | <p>-</p> | SNMP agent |
autosupportFailedSends<p>Update: 5m</p> |
Number of reconstructing parity Disks | <p>-</p> | SNMP agent |
diskReconstructingParityCount<p>Update: 1m</p> |
Autosupport Status Message | <p>-</p> | SNMP agent |
autosupportStatusMessage<p>Update: 5m</p> |
Number of verifying parity Disks | <p>-</p> | SNMP agent |
diskVerifyingParityCount<p>Update: 1m</p> |
Number of spare Disks | <p>-</p> | SNMP agent |
diskSpareCount<p>Update: 30m</p> |
Failed Disks Count | <p>-</p> | SNMP agent |
diskFailedCount<p>Update: 1m</p> |
Prefailed Disks Count | <p>-</p> | SNMP agent |
diskPrefailedCount<p>Update: 1m</p> |
Disk Failed Message | <p>-</p> | SNMP agent |
diskFailedMessage<p>Update: 1m</p> |
Product Version | <p>-</p> | SNMP agent |
productVersio<p>Update: 30m</p> |
Autosupport Status | <p>-</p> | SNMP agent |
autosupportStatus<p>Update: 5m</p> |
CPU usage (%) | <p>-</p> | SNMP agent |
cpuBusyTimePerCent<p>Update: 1m</p> |
Autosupport Successful Sends | <p>-</p> | SNMP agent |
autosupportSuccessfulSends<p>Update: 5m</p> |
CPU Count | <p>-</p> | SNMP agent |
cpuCount<p>Update: 30m</p> |
Enclosure[{#ENCLNUM}] Failed Electronic | <p>-</p> | SNMP agent |
enclElectronicsFailed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Temperature warn | <p>-</p> | SNMP agent |
enclTempSensorsOverTempWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Voltage fail | <p>-</p> | SNMP agent |
enclVoltSensorsUnderVoltFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Voltage warn | <p>-</p> | SNMP agent |
enclVoltSensorsOverVoltWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Voltage fail | <p>-</p> | SNMP agent |
enclVoltSensorsOverVoltFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Current Voltage | <p>-</p> | SNMP agent |
enclVoltSensorsCurrentVolt[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Temperature warn | <p>-</p> | SNMP agent |
enclTempSensorsUnderTempWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Temperature fail | <p>-</p> | SNMP agent |
enclTempSensorsUnderTempFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Over Temperature fail | <p>-</p> | SNMP agent |
enclTempSensorsOverTempFail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Electronic | <p>-</p> | SNMP agent |
enclElectronicsPresent[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Current Temperature | <p>-</p> | SNMP agent |
enclTempSensorsCurrentTemp[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Product Model | <p>-</p> | SNMP agent |
enclProductModel[{#SNMPINDEX}]<p>Update: 12h</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Product ID | <p>-</p> | SNMP agent |
enclProductID[{#SNMPINDEX}]<p>Update: 12h</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Failed Power Supplies | <p>-</p> | SNMP agent |
enclPowerSuppliesFailed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Fans Speed | <p>-</p> | SNMP agent |
enclFansSpeed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Failed Fans | <p>-</p> | SNMP agent |
enclFansFailed[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Enclosure[{#ENCLNUM}] Under Voltage warn | <p>-</p> | SNMP agent |
enclVoltSensorsUnderVoltWarn[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] cannot take over cause | <p>-</p> | SNMP agent |
haCannotTakeoverCause[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA Interconnect Status | <p>-</p> | SNMP agent |
haInterconnectStatus[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA Partner Name | <p>-</p> | SNMP agent |
haPartnerName[{#NODENAME}]<p>Update: 12h</p><p>LLD</p> |
Node[{#NODENAME}] HA Partner Status | <p>-</p> | SNMP agent |
haPartnerStatus[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA Settings | <p>-</p> | SNMP agent |
haSettings[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
Node[{#NODENAME}] HA State | <p>-</p> | SNMP agent |
haState[{#NODENAME}]<p>Update: 1m</p><p>LLD</p> |
SnapMirror [{#SNAPINDEX}] Destination Path | <p>-</p> | SNMP agent |
snapmirrorRelDestPath[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
SnapMirror [{#SNAPINDEX}] Healthy | <p>-</p> | SNMP agent |
snapmirrorRelHealthy[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
SnapMirror [{#SNAPINDEX}] Lag | <p>-</p> | SNMP agent |
snapmirrorRelLag[{#SNMPINDEX}]<p>Update: 300s</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Last Transfer Size | <p>-</p> | SNMP agent |
snapmirrorRelLastTransferSize[{#SNMPINDEX}]<p>Update: 300s</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Last Transfer Time | <p>-</p> | SNMP agent |
snapmirrorRelLastTransferTime[{#SNMPINDEX}]<p>Update: 300s</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Source Path | <p>-</p> | SNMP agent |
snapmirrorRelSrcPath[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} State | <p>-</p> | SNMP agent |
snapmirrorRelState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
SnapMirror {#SNAPINDEX} Status | <p>-</p> | SNMP agent |
snapmirrorRelStatus[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
VIF[{#VIF}] is Home | <p>-</p> | SNMP agent |
logicalInterfaceIsHome[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Size | <p>-</p> | SNMP agent |
df64TotalKBytesVol[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Used | <p>-</p> | SNMP agent |
df64UsedKBytesVol[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Used (%) | <p>-</p> | SNMP agent |
dfPerCentKBytesCapacityVol[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Used Inode % | <p>-</p> | SNMP agent |
dfVolInodePercent[{#SNMPINDEX}]<p>Update: 10m</p><p>LLD</p> |
Volume[{#VOLNAME}] Aggregate | <p>-</p> | SNMP agent |
volAggrName[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] NV Failed State | <p>Indicates whether the volume is in nvfailed state. This is only applicable to cluster-mode volumes.</p> | SNMP agent |
volInNvfailedState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Language | <p>-</p> | SNMP agent |
volLanguage[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] NV Failed enabled | <p>Indicates whether nvfail option is enabled on this volume.</p> | SNMP agent |
volNvfail[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Space Guarantee enabled | <p>.</p> | SNMP agent |
volSpaceGuaranteeEnabled[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] Space Guarantee | <p>.</p> | SNMP agent |
volSpaceGuarantee[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] State | <p>-</p> | SNMP agent |
volState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Volume[{#VOLNAME}] Type | <p>Type of this volume, older volumes are traditional while newer volumes contained in aggregates are flexible.</p> | SNMP agent |
volType[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Volume[{#VOLNAME}] Vserver | <p>-</p> | SNMP agent |
volVserver[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p> |
Aggregate Owners[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrOwners[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate Raidtype[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrRaidType[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate State[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrState[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Aggregate Status[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrStatus[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Aggregate Type[{#AGGRNAME}] | <p>-</p> | SNMP agent |
aggrType[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate Size[{#AGGRNAME}] | <p>-</p> | SNMP agent |
df64TotalKBytes[{#SNMPINDEX}]<p>Update: 30m</p><p>LLD</p> |
Aggregate Used Size[{#AGGRNAME}] | <p>-</p> | SNMP agent |
df64UsedKBytes[{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
Aggregate Size Free (%)[{#AGGRNAME}] | <p>-</p> | SNMP agent |
dfPerCentKBytesCapacity[{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
Aggregate Filesystem Status[{#AGGRNAME}] | <p>-</p> | SNMP agent |
dfStatus[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
Filesystem {#AGGRNAME} not mounted | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfStatus[{#SNMPINDEX}])<>2</p><p>Recovery expression: </p> | average |
Free Size on {#AGGRNAME} less than 10% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacity[{#SNMPINDEX}])<10</p><p>Recovery expression: </p> | high |
Free Size on {#AGGRNAME} less than 20% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacity[{#SNMPINDEX}])<20</p><p>Recovery expression: </p> | average |
Failed electric: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclElectronicsFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
Failed fans: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclFansFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
Failed power supply: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclPowerSuppliesFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
LIF[{#VIF}] on {HOST.NAME} not at home port | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/logicalInterfaceIsHome[{#SNMPINDEX}])>1</p><p>Recovery expression: </p> | average |
{HOST.HOST} can not takeover | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haState[{#NODENAME}])<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} HA disabled | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haSettings[{#NODENAME}])<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} Interconnect status not up | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haInterconnectStatus[{#NODENAME}])<>4</p><p>Recovery expression: </p> | average |
{HOST.HOST} Partner status not ok | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haPartnerStatus[{#NODENAME}])<>2</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] is not Healthy | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelHealthy[{#SNMPINDEX}])<>1</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 1 day | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>86400</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] Lag is greater than 2 days | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>172800</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 5 days | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>432000</p><p>Recovery expression: </p> | disaster |
SnapMirror {#SNAPINDEX} is having problems | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelStatus[{#SNMPINDEX}])>=11</p><p>Recovery expression: </p> | high |
SnapMirror {#SNAPINDEX} is not idle | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelStatus[{#SNMPINDEX}])<>0</p><p>Recovery expression: </p> | information |
Free Inode on Volume[{#VOLNAME}] less than 10% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfVolInodePercent[{#SNMPINDEX}])>89</p><p>Recovery expression: </p> | disaster |
Free Inode on Volume[{#VOLNAME}] less than 25% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfVolInodePercent[{#SNMPINDEX}])>84</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 10% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacityVol[{#SNMPINDEX}])>90</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 20% | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacityVol[{#SNMPINDEX}])>80</p><p>Recovery expression: </p> | average |
Failed electric: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] (LLD) | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclElectronicsFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
Failed fans: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] (LLD) | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclFansFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
Failed power supply: {ITEM.LASTVALUE} on Enclosure[{#ENCLNUM}] (LLD) | <p>-</p> | <p>Expression: length(last(/SNMP NetApp cDot/enclPowerSuppliesFailed[{#SNMPINDEX}]))>0</p><p>Recovery expression: </p> | high |
{HOST.HOST} can not takeover (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haState[{#NODENAME}])<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} HA disabled (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haSettings[{#NODENAME}])<>2</p><p>Recovery expression: </p> | high |
{HOST.HOST} Interconnect status not up (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haInterconnectStatus[{#NODENAME}])<>4</p><p>Recovery expression: </p> | average |
{HOST.HOST} Partner status not ok (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/haPartnerStatus[{#NODENAME}])<>2</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] is not Healthy (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelHealthy[{#SNMPINDEX}])<>1</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 1 day (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>86400</p><p>Recovery expression: </p> | average |
SnapMirror [{#SNAPINDEX}] Lag is greater than 2 days (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>172800</p><p>Recovery expression: </p> | high |
SnapMirror [{#SNAPINDEX}] Lag is greater than 5 days (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelLag[{#SNMPINDEX}])>432000</p><p>Recovery expression: </p> | disaster |
SnapMirror {#SNAPINDEX} is having problems (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelStatus[{#SNMPINDEX}])>=11</p><p>Recovery expression: </p> | high |
SnapMirror {#SNAPINDEX} is not idle (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/snapmirrorRelStatus[{#SNMPINDEX}])<>0</p><p>Recovery expression: </p> | information |
LIF[{#VIF}] on {HOST.NAME} not at home port (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/logicalInterfaceIsHome[{#SNMPINDEX}])>1</p><p>Recovery expression: </p> | average |
Free Inode on Volume[{#VOLNAME}] less than 10% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfVolInodePercent[{#SNMPINDEX}])>89</p><p>Recovery expression: </p> | disaster |
Free Inode on Volume[{#VOLNAME}] less than 25% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfVolInodePercent[{#SNMPINDEX}])>84</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 10% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacityVol[{#SNMPINDEX}])>90</p><p>Recovery expression: </p> | high |
Free Size on Volume[{#VOLNAME}] less than 20% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacityVol[{#SNMPINDEX}])>80</p><p>Recovery expression: </p> | average |
Filesystem {#AGGRNAME} not mounted (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfStatus[{#SNMPINDEX}])<>2</p><p>Recovery expression: </p> | average |
Free Size on {#AGGRNAME} less than 10% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacity[{#SNMPINDEX}])<10</p><p>Recovery expression: </p> | high |
Free Size on {#AGGRNAME} less than 20% (LLD) | <p>-</p> | <p>Expression: last(/SNMP NetApp cDot/dfPerCentKBytesCapacity[{#SNMPINDEX}])<20</p><p>Recovery expression: </p> | average |