Available versions




SNMP MegaRAID SAS

Description

Zabbix Template for Avago Megaraid SAS (formerly LSI) RAID cards

Overview

This is initial template for Monitoring LSI/Avago/Broadcom (or branded like Intel, IBM, Supermicro etc) MegaRAID based hardware RAID cards. According to vendor docs it should also support non-RAID adapters, enclosures and some other devices.

It took me one night to complete major/required parts, so far template supports most of the options and all the critical components to keep you warned in case some RAID-related problems will occur.

Supported so far:

Planned:

Not tested yet:

Installation and Requirements:

Bugs?
-> Please Report @GitHub or at giomac gmail com

When will you finish this?
-> Nah, all critical issues are included, will do, definitely, but not asap

Author

George Machitidze

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
MegaRAID SAS MIB SAS adapters <p>A List of adapter Entries containing Information/Properties about the MegaRAID related adapters on host.</p> SNMP agent adapterID<p>Update: 900</p>
MegaRAID SAS MIB SAS devices <p>A List of device Entries containing Information/Properties about the MegaRAID related devices on host.</p> SNMP agent physDevID<p>Update: 60</p>

Items collected

Name Description Type Key and additional info
MegaRAID SAS MIB Number of SAS adapters present <p>-</p> SNMP agent adpNumber<p>Update: 60</p>
MegaRAID SAS MIB Version <p>-</p> SNMP agent mibVersion<p>Update: 60</p>
MegaRAID SAS MIB Agent Module Name <p>-</p> SNMP agent agentModuleName<p>Update: 60</p>
MegaRAID SAS MIB Agent Module Version <p>-</p> SNMP agent agentModuleVersion<p>Update: 60</p>
MegaRAID SAS MIB Abort CC on detecting error support for adapter $1 <p>Abort CC on detecting error is supported on this adapter. Values:No(0),Yes(1)</p> SNMP agent abortCConErrorSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Devices in adapter $1 <p>Physical devices present in this adapter.</p> SNMP agent pdPresentCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB FW requires application to set up power state before conf change on adapter $1 <p>FW requires application to set power state before configuration changes. Required(1), Not Required(0)</p> SNMP agent setPowerStateForCfg[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 Controller Serial Number <p>Controller serial number</p> SNMP agent serialNo[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Self Diagnostic Support for adapter $1 <p>Controller supports self diagnostic. Values:false(0),true(1)</p> SNMP agent selfDiagnosticSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Security Support for adapter $1 <p>Displays the security support. if supported (1) , not supported (0)</p> SNMP agent securitySupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Board Revision ID for adapter $1 <p>Board revision ID for this Adapter.</p> SNMP agent revisionIdentifier[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Revertible Hotspares Support for adapter $1 <p>Revertible HotSpares support for this adapter. Values:false(0),true(1)</p> SNMP agent revertibleHotSparesSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Reconstruction Rate on adapter $1 <p>Reconstruction rate on this Adapter.</p> SNMP agent reconstructionRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Reconstruction Rate Change Support for adapter $1 <p>Reconstruction rate change support for this adapter. Values:false(0),true(1)</p> SNMP agent reconRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Rebuilding Rate Change Support for adapter $1 <p>Rebuilding rate change support for this Adapter. Values:false(0),true(1)</p> SNMP agent rbldRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 Product Name <p>Product name e.g. MegaRAID SAS-8E, MegaRAID SAS-4X, etc.</p> SNMP agent productName[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Prevent import of SAS Pi protected LD on adapter $1 <p>1=Prevent import of SAS PI protected logical disks , 0=Not Prevent import of SAS PI protected logical disks</p> SNMP agent preventPIImport[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Predictive Fail Poll Interval on adapter $1 <p>Number of seconds between precdictive fail polls on this adapter.</p> SNMP agent predFailPollInterval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Peer Controller Status on adapter $1 <p>This field gives the Peer controller Status</p> SNMP agent peerControllerStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Disk Devices in adapter $1 <p>Physical disk devices present in this adapter.</p> SNMP agent pdDiskPresentCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spin Down Time on adapter $1 <p>SpinDownTime in minutes</p> SNMP agent spinDownTime[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Disk Devices with pre-fail state on adapter $1 <p>Number of disk devices in this adapter that are critical</p> SNMP agent pdDiskPredFailureCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Failed Physical Disk Devices on adapter $1 <p>Number of disk devices in this adapter that are failed</p> SNMP agent pdDiskFailedCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Patrol Read Rate on adapter $1 <p>Patrol Read Rate for this adapter.</p> SNMP agent patrolReadRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Patrol Read Rate Change Support for adapter $1 <p>Patrol read rate change support for this adapter. Values:false(0),true(1)</p> SNMP agent patrolRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Logical Drives per Array in configuration on adapter $1 <p>Max LD’s per Array in configuration</p> SNMP agent partitionsInDDF[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB NVRAM size on adapter $1 <p>NVRAM size in KB for this adapter.</p> SNMP agent nvramSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Multipath Support for adapter $1 <p>Multipath is supported or not supported on this adapter.Values:not supported(0),supported(1)</p> SNMP agent multipathSupport[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Memory size on adapter $1 <p>Memory size in MB for this adapter.</p> SNMP agent memorySize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum no of Virtual Drives supported for adapter $1 <p>Maximum number of Virtual Drives supported for this adapter.</p> SNMP agent maxVDs[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum spans per Virtual Drive supported for adapter $1 <p>Maximum spans per Virtual Drive supported for this Adapter.</p> SNMP agent maxSpans[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB maximum Scatter Gather Element count allowed on adapter $1 <p>The maximum Scatter Gather Element count allowed on this adapter.</p> SNMP agent maxSGECount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Data Transfer Size on adapter $1 <p>The maximum data transfer size in sectors, on this adapter.</p> SNMP agent maxRequestSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Logical Drives per Array on adapter $1 <p>Max Ld’s per array in adapter</p> SNMP agent maxLdsPerArray[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spanning Support for adapter $1 <p>Spanning support for this adapter. Values:false(0),true(1)</p> SNMP agent spanningAllowedSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Delay among spinup groups for this adapter $1 <p>Number of seconds to delay among spinup groups for this adapter.</p> SNMP agent spinupDelay[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Configurable SSC Size on adapter $1 <p>This field give the information about maximum Size of SSC that can yet be configured,in GB</p> SNMP agent maximumCacheSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB PI Support for adapter $1 <p>Displays the support PI. 1=LD SAS PI Type 0, 0=LD Not SAS PI Type 0</p> SNMP agent supportPIcontroller[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Virtual Devices in adapter $1 <p>Virtual devices present in this adapter.</p> SNMP agent vdPresentCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Offline Virtual Devices in adapter $1 <p>Number of virtual devices in this adapter that are offline</p> SNMP agent vdOfflineCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Degraded Virtual Devices in adapter $1 <p>Number of virtual devices in this adapter that are critical</p> SNMP agent vdDegradedCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Emergency Spare Drive possible drive on adapter $1 <p>This field give the information about Emergency Spare possible Drive types(Uncongiured Good/Global Hotspare)</p> SNMP agent useEmergencySpare[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Use Emergency Spares for SMARTer on adapter $1 <p>1 =Use Emergency spares for SMARTer ,0 =Not Use Emergency spares for SMARTer</p> SNMP agent useEmergencySparesforSMARTer[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Total Space used for MetaData on adapter $1 <p>Total Space used for MetaData</p> SNMP agent totalSpaceformetadata[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Currently Confugured Total Cache Size on adapter $1 <p>This field give the information about total Size of currently configured SSC,in GB</p> SNMP agent totalCacheSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Topology Types info for adapter $1 <p>This field gives the Topology Type</p> SNMP agent topologyType[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Raid On Chip Temperature on adapter $1 <p>temperature of RAID On Chip in Celsius</p> SNMP agent temperatureROC[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller Temperature on adapter $1 <p>temperature of controller in Celsius</p> SNMP agent temperatureCtrl[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SATA Drive Support on adapter $1 <p>SATA physical drive support. Values:notSupported(0), supported(1)</p> SNMP agent supportsSATA[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SAS Drive Support on adapter $1 <p>SAS physical drive support. Values:notSupported(0), supported(1)</p> SNMP agent supportsSAS[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB PD shield state support on adapter $1 <p>1=Support PD shield state, 0=Not Support PD shield state</p> SNMP agent supportShieldState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Online Firmware Update Support on adapter $1 <p>1=Online firmware update is supported, 0=Online firmware update is not supported</p> SNMP agent supportOnlineFWUpdate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum number of drives to spin up at one time for adapter $1 <p>Maximum number of drives to spin up at one time for this adapter.</p> SNMP agent spinupDriveCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB FastPath WriteBack Support on Raptor LD for adapter $1 <p>1=Support Fast Path WB on Raptor Type Ld, 0=Does not support Fast Path WB on Raptor Type Ld</p> SNMP agent supportFastPathWB[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Read Policy Support on adapter $1 <p>Read policy support. Values: false(0), true(1)</p> SNMP agent supportedReadPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Minimum Stripe Size Supported on adapter $1 <p>Minimum stripe size supported. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) … 11(1MB) etc</p> SNMP agent supportedMinSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Stripe Size Supported on adapter $1 <p>Maximum stripe size supported. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) … 11(1MB) etc</p> SNMP agent supportedMaxSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB IO Policy Support on adapter $1 <p>IO policy support. Values: false(0), true(1)</p> SNMP agent supportedIOPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Access Policy Support on adapter $1 <p>Access policy support. Values: false(0), true(1)</p> SNMP agent supportedAccessPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Configuration Auto Balance Support on adapter $1 <p>0=no configuration auto balance support, 1=configuration auto balance support is present</p> SNMP agent supportConfigAutoBalance[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Break Mirror Operation Support on adapter $1 <p>1=Support break mirror operation,0=Do not Support break mirror operation</p> SNMP agent supportBreakMirror[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Sub-Vendor ID <p>PCI Sub-Vendor ID for this adapter.</p> SNMP agent subVendorID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Sub-Device ID <p>PCI Sub-Device ID for this adapter.</p> SNMP agent subDevID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Copy back on SSD on SMART error on adapter $1 <p>Copyback to SSD on SMART error. Values Enabled(0),Disabled(1)</p> SNMP agent ssdSMARTerEnabled[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Drives to Spin Up in Enclosure on adapter $1 <p>Maximum number of drives that can be spin up in an enclosure</p> SNMP agent spinupEnclDriveCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Delay Betwen Drive Spin Up in Enclosure on adapter $1 <p>Delay between drive spin up for drives within an enclosure</p> SNMP agent spinupEnclDelay[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum no of HA nodes supported by FW on adapter $1 <p>This field gives the HA nodes this FW supports</p> SNMP agent maximumControllerNodes[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum number of drives to spinup within 60 sec for direct attached drives for adapter $1 <p>Maximum number of drives to spinup within 60 sec for direct attached drives</p> SNMP agent maxDAPdCountSpinup60[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Abort Consistency Check on error Adapter $1 <p>Abort CC on detecting error is enabled or disabled on this adapter. Values:No(0),Yes(1),NA(2)</p> SNMP agent abortCConError[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Cache Flush Interval on adapter $1 <p>Cache flush interval in seconds for this adapter.</p> SNMP agent cacheFlushInterval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Device ID <p>PCI Device ID for this Adapter.</p> SNMP agent devID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB adapter $1 default power saving policy <p>power saving policy.values:controller default power saving policy=0, AUTO=1, MAX=2, Max with no cache=6, NONE=255</p> SNMP agent defaultLdPSPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Dedicated Hotspares Support for adapter $1 <p>Dedicated HotSpares support for this adapter. Values:false(0),true(1)</p> SNMP agent dedicatedHotSparesSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller SAS Addresses on adapter $1 <p>This field gives the controller SAS address</p> SNMP agent ctrlSasAddr[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB CopyBack state on adapter $1 <p>CopyBack is enabled or disabled on this adapter.Values:disabled(0),enabled(1)</p> SNMP agent copyBackState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Compatibility info for adapter $1 <p>Compatibility Information. Format->(Firmware Forward compatibility flag:Firmware Backward compatibility flag:Firmware version flag:Application Forward compatibility flag:Application Backward compatibility flag:Application version flag)</p> SNMP agent compatibilityInfo[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Compatibility for adapter $1 <p>To inform compatibilities between Applications and FW. 0->incompatible;1->compatible</p> SNMP agent compatibilityFlag[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Drive Capacity Coercion Mode on adapter $1 <p>Drive capacity coercion mode. 0->None;1->128MB;2->1GB</p> SNMP agent coercionMode[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Cluster Support for adapter $1 <p>Cluster support for this adapter. Values:false(0),true(1)</p> SNMP agent clusterSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Cluster State on adapter $1 <p>Cluster is enabled or disabled on this adapter. Values:disabled(0),enabled(1)</p> SNMP agent clusterState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Consistency Check Rate on adapter $1 <p>Consistency Check rate on this Adapter.</p> SNMP agent ccRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Consistensy Check Rate Change Support for adapter $1 <p>Consistency Check rate change support for this Adapter. Values:false(0),true(1)</p> SNMP agent ccRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller Cache pinned for missing or offline LDs on adapter $1 <p>1=controller cache is pinned for missing or offline LDs</p> SNMP agent cacheIsPinned[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB BIOS Not Detected Support on adapter $1 <p>bios Not Detected support for this Adapter. Values:false(0),true(1)</p> SNMP agent biosNotDetected[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device Interface Port Count on Adapter $1 <p>Device Port Count on this adapter.</p> SNMP agent devInterfacePortCnt[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Background Initialization Rate on adapter $1 <p>Background initialization rate for this adapter.</p> SNMP agent bgiRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Background Initialization Rate Change Support for adapter $1 <p>Background initialization rate change support for this adapter. Values:false(0),true(1)</p> SNMP agent bgiRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Battery Backup Unit Support for adapter $1 <p>BBU support for this adapter. Values:false(0),true(1)</p> SNMP agent bbuSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Allow SAS/SATA SSD within LD on adapter $1 <p>allow SAS/SATA SSD mix within an LD. allow(1), not allow(0)</p> SNMP agent allowSSDMixInLD[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SATA in Cluster Support on adapter $1 <p>SataInCluster support. Values:notSupported(0), supported(1)</p> SNMP agent allowSataInCluster[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Allow SSD/HDD Mix within LD on adapter $1 <p>allow SSD/HDD mix within an LD.allow(1), not allow(0)</p> SNMP agent allowMixSSDHDDInLD[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Mix in Virtual Drive Support on adapter $1 <p>MixInVIRTUALDRIVE support. Values:notSupported(0), supported(1)</p> SNMP agent allowMixInVD[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Mix in Enclosure Support on adapter $1 <p>Mix InEnclosure support. Values:notSupported(0), supported(1)</p> SNMP agent allowMixInEnclosure[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Mixer Redundancy Support for adapter $1 <p>Allow different Virtual Disk on the same array to have different redundancy levels. Values:false(0),true(1)</p> SNMP agent allowMixedRedundancyOnArraySupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller encryption support on adapter $1 <p>if it is set (1) supports controller encryption</p> SNMP agent allowCtrlEncryption[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Alarm State on adapter $1 <p>Alarm is enabled or disabled on this adapter. Values:disabled(0),enabled(1)</p> SNMP agent alarmState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Alarm Control Support for adapter $1 <p>Alarm control support for this adapter. Values:false(0),true(1)</p> SNMP agent alarmControlSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Vendor ID <p>PCI Vendor ID for this Adapter.</p> SNMP agent adapterVendorID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device Interface Port Addresses on Adapter $1 <p>Device Port address comma delimited</p> SNMP agent devInterfacePortAddr[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Multiple Device Interface Support Values for Adapter $1 <p>Multiple device interface support values separated by space.</p> SNMP agent devInterface[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Parallel Commands Supported on adapter $1 <p>The maximum parallel commands supported on this adapter.</p> SNMP agent maxConcurrentCmds[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Host Interface Port Address for Adapter $1 <p>Port address comma delimited</p> SNMP agent hostInterfacePortAddr[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum no of arrays supported for adapter $1 <p>Maximum no of arrays supported for this adapter.</p> SNMP agent maxArrays[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum arms per Virtual Drive supported for adapter $1 <p>Maximum arms per Virtual Drive supported for this Adapter.</p> SNMP agent maxArms[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Firmware support for Maintenance Mode on adapter $1 <p>1=FW supports maintenance mode</p> SNMP agent maintenanceMode[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Lock Key Not BackedUp Support on adapter $1 <p>lock Key Not Backedup support for this Adapter. Values:false(0),true(1)</p> SNMP agent lockKeyNotBackedup[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Lock Key Failed Support on adapter $1 <p>lock Key Failed support for this Adapter. Values:false(0),true(1)</p> SNMP agent lockKeyFailed[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Type of lock key binding for adapter $1 <p>Type of lock key binding. lock key is not bound(0),lock key bound to FW secret key(1), lock key bound to user(2), lock key bound to a TPM(3)</p> SNMP agent lockKeyBinding[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Lock Key Assigned Support on adapter $1 <p>Lock key Assigned support for this Adapter. Values:false(0),true(1)</p> SNMP agent lockKeyAssigned[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Bad Block Management State on adapter $1 <p>1=LD bad block management is enabled, 0=LD bad block management is not enabled</p> SNMP agent ldbbm[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Interrupt throttle completion hold time on adapter $1 <p>Interrupt throttle completion hold time on this adapter.</p> SNMP agent intThrottleTimeUs[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Interrupt throttle active count on adapter $1 <p>Interrupt throttle active count on this adapter.</p> SNMP agent intThrottleCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Incompatibility details for adapter $1 <p>This field gives the Incompatibility Details</p> SNMP agent incompatibilityDetails[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Host Interface for Adapter $1 <p>Host interface information for this adapter. Values:N/A(0),PCIX(1),PCIE(2),iSCSI(3),SAS-3G(4)</p> SNMP agent hostInterface[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Host Interface Port Count for Adapter $1 <p>Port Count on this adapter.</p> SNMP agent hostInterfacePortCnt[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Foreign Import Support for adapter $1 <p>Support foreign config import on this adapter. Values:false(0),true(1)</p> SNMP agent foreignConfigImportSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Large IO Support on adapter $1 <p>0=Large IO is supported, 1=Large IO is unsupported</p> SNMP agent disableLargeIO[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Drive force Rebuild Support on adapter $1 <p>Physical drive force Rebuild operation support. Values:notSupported(0), supported(1)</p> SNMP agent forceRebuild[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Drive force Online Support on adapter $1 <p>Physical drive force Online operation support. Values:notSupported(0), supported(1)</p> SNMP agent forceOnline[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Drive force Offline Support on adapter $1 <p>Physical drive force Offline operation support. Values:notSupported(0), supported(1)</p> SNMP agent forceOffline[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Flash size on adapter $1 <p>Flash size in MB for this adapter.</p> SNMP agent flashSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Firmware Version for adapter $1 <p>Firmware version Format->(Firmware Package Version:Version:Date:Time)</p> SNMP agent firmwareVersion[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Expander Firmware Version for adapter $1 <p>Expander firmware version - Not Available if expander is not present on the controller</p> SNMP agent expanderFirmwareVersion[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spin Down Unconfigured Drives on adapter $1 <p>Spin Down Unconfigured Drives(1), Do Not Spin Down Unconfigured Drives(0)</p> SNMP agent enableSpinDownUnconfigured[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Enable SAS Pi on adapter $1 <p>1 =Enable SAS PI for controller , 0 =Disable SAS PI for controller</p> SNMP agent enablePI[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Driver Version for adapter $1 <p>Driver version Format->(Driver Name:Version)</p> SNMP agent driverVersion[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Domain ID of adapter $1 <p>This field gives the Domain ID</p> SNMP agent domainId[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spin Down Hotspares on adapter $1 <p>Spin Down Hotspares(0), Do Not Spin Down Hotspares(1)</p> SNMP agent disableSpinDownHotSpare[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Logical Drive Power Saving disable time after 12:00AM on adapter $1 <p>LD power savings shall be disabled at xx minutes from 12:00am.</p> SNMP agent disableLdPSTime[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Interval for disabling power saving after power saving time on adapter $1 <p>LD power savings are disabled for yy hours beginning at disableLdPSTime.</p> SNMP agent disableLdPSInterval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SSC Support Write Caching IO’s on adapter $1 <p>1=SSC support write caching IOs, 0=SSC not support write caching IOs</p> SNMP agent writeCacheCapable[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Adapter Port(s) to which it is connected <p>Adapter port(s) to which the device is connected.</p> SNMP agent connectedAdapterPort[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Supported Speed for Device $1 <p>Maximum supported speed. Values:speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3)</p> SNMP agent deviceSpeed[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Ready for Removal <p>If true, drive is ready for removal. Values:false(0),true(1)</p> SNMP agent disabledForRemoval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Negotiated Link Speed for Device $1 <p>Negotiated link speed. Values:speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3)</p> SNMP agent linkSpeed[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Media Error Count of Device $1 <p>Error count of the device</p> SNMP agent mediaErrCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Certtified by OEM <p>Is the drive certified by the OEM (OEM-specific checks). Values:notCertified(1), Certified(0)</p> SNMP agent oemCertified[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Supported by OEM <p>Is the drive supported by the OEM (OEM-specific checks). Values:notSupported(1), supported(0)</p> SNMP agent oemSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Operation progress for Device $1 <p>Operation progress in %. e.g. Rebuild progress is 10%</p> SNMP agent operationProgress[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Other Error Count of Device $1 <p>Error count of the device</p> SNMP agent otherErrCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Firmware Interpretation of state of Device $1 <p>Firmware’s interpretation of drive state. Values:unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(32),system(64),UNCONFIGURED-SHIELDED(128),HOTSPARE-SHIELDED(130),CONFIGURED-SHIELDED(144)</p> SNMP agent pdState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Temperature <p>Physical Drive temperature in Celsius</p> SNMP agent pdTemperature[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Predictive Fail Count of Device $1 <p>Predictive fail count of the device</p> SNMP agent predFailCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Type of Device $1 <p>Type of this Device. Values:disk(0),tape(1),printer(2),processor(3),cdrom(5),scanner(6),optical(7),enclosure(13),dvd(10),unknown(31)</p> SNMP agent scsiDevType[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>

Triggers

Name Description Expression Priority
Critical temperature on Raid on Chip for adapter {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP MegaRAID SAS:temperatureROC[{#SNMPVALUE}].last()}>115</p><p>Recovery expression: {SNMP MegaRAID SAS:temperatureROC[{#SNMPVALUE}].last()}<105</p> high
Degraded Virtual devices on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP MegaRAID SAS:vdDegradedCount[{#SNMPVALUE}].last()}>0</p><p>Recovery expression: </p> high
Disks with pre-fail state detected on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdDiskPredFailureCount[{#SNMPVALUE}].last()}>0</p><p>Recovery expression: </p> high
Failed disks detected on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdDiskFailedCount[{#SNMPVALUE}].last()}>0</p><p>Recovery expression: </p> high
High temperature on Raid on Chip for adapter {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP MegaRAID SAS:temperatureROC[{#SNMPVALUE}].last()}>90</p><p>Recovery expression: {SNMP MegaRAID SAS:temperatureROC[{#SNMPVALUE}].last()}<80</p> average
Offline Virtual devices on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP MegaRAID SAS:vdOfflineCount[{#SNMPVALUE}].last()}>0</p><p>Recovery expression: </p> high
Failed state for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdState[{#SNMPVALUE}].last()}=17</p><p>Recovery expression: </p> high
MegaRAID Device {#SNMPVALUE} not certified by OEM <p>-</p> <p>Expression: {SNMP MegaRAID SAS:oemCertified[{#SNMPVALUE}].last()}=0</p><p>Recovery expression: </p> average
MegaRAID Device {#SNMPVALUE} Temperature too high <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdTemperature[{#SNMPVALUE}].last()}>50</p><p>Recovery expression: {SNMP MegaRAID SAS:pdTemperature[{#SNMPVALUE}].last()}<47</p> high
Rebuilding state for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdState[{#SNMPVALUE}].last()}=20</p><p>Recovery expression: </p> warning
Unconfigured Bad state for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdState[{#SNMPVALUE}].last()}=1</p><p>Recovery expression: </p> high
Unknown Negotiated Link Speed for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP MegaRAID SAS:linkSpeed[{#SNMPVALUE}].last()}=0</p><p>Recovery expression: </p> high
Critical temperature on Raid on Chip for adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:temperatureROC[{#SNMPVALUE}].last()}>115</p><p>Recovery expression: {SNMP MegaRAID SAS:temperatureROC[{#SNMPVALUE}].last()}<105</p> high
Degraded Virtual devices on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:vdDegradedCount[{#SNMPVALUE}].last()}>0</p><p>Recovery expression: </p> high
Disks with pre-fail state detected on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdDiskPredFailureCount[{#SNMPVALUE}].last()}>0</p><p>Recovery expression: </p> high
Failed disks detected on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdDiskFailedCount[{#SNMPVALUE}].last()}>0</p><p>Recovery expression: </p> high
High temperature on Raid on Chip for adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:temperatureROC[{#SNMPVALUE}].last()}>90</p><p>Recovery expression: {SNMP MegaRAID SAS:temperatureROC[{#SNMPVALUE}].last()}<80</p> average
Offline Virtual devices on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:vdOfflineCount[{#SNMPVALUE}].last()}>0</p><p>Recovery expression: </p> high
Failed state for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdState[{#SNMPVALUE}].last()}=17</p><p>Recovery expression: </p> high
MegaRAID Device {#SNMPVALUE} not certified by OEM (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:oemCertified[{#SNMPVALUE}].last()}=0</p><p>Recovery expression: </p> average
MegaRAID Device {#SNMPVALUE} Temperature too high (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdTemperature[{#SNMPVALUE}].last()}>50</p><p>Recovery expression: {SNMP MegaRAID SAS:pdTemperature[{#SNMPVALUE}].last()}<47</p> high
Rebuilding state for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdState[{#SNMPVALUE}].last()}=20</p><p>Recovery expression: </p> warning
Unconfigured Bad state for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:pdState[{#SNMPVALUE}].last()}=1</p><p>Recovery expression: </p> high
Unknown Negotiated Link Speed for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP MegaRAID SAS:linkSpeed[{#SNMPVALUE}].last()}=0</p><p>Recovery expression: </p> high

SNMP MegaRAID SAS

Description

Zabbix Template for Avago Megaraid SAS (formerly LSI) RAID cards

Overview

This is initial template for Monitoring LSI/Avago/Broadcom (or branded like Intel, IBM, Supermicro etc) MegaRAID based hardware RAID cards. According to vendor docs it should also support non-RAID adapters, enclosures and some other devices.

It took me one night to complete major/required parts, so far template supports most of the options and all the critical components to keep you warned in case some RAID-related problems will occur.

Supported so far:

Planned:

Not tested yet:

Installation and Requirements:

Bugs?
-> Please Report @GitHub or at giomac gmail com

When will you finish this?
-> Nah, all critical issues are included, will do, definitely, but not asap

Author

George Machitidze

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
MegaRAID SAS MIB SAS adapters <p>A List of adapter Entries containing Information/Properties about the MegaRAID related adapters on host.</p> SNMP agent adapterID<p>Update: 900</p>
MegaRAID SAS MIB SAS devices <p>A List of device Entries containing Information/Properties about the MegaRAID related devices on host.</p> SNMP agent physDevID<p>Update: 60</p>

Items collected

Name Description Type Key and additional info
MegaRAID SAS MIB Agent Module Version <p>-</p> SNMP agent agentModuleVersion<p>Update: 60</p>
MegaRAID SAS MIB Number of SAS adapters present <p>-</p> SNMP agent adpNumber<p>Update: 60</p>
MegaRAID SAS MIB Version <p>-</p> SNMP agent mibVersion<p>Update: 60</p>
MegaRAID SAS MIB Agent Module Name <p>-</p> SNMP agent agentModuleName<p>Update: 60</p>
MegaRAID SAS MIB Abort CC on detecting error support for adapter $1 <p>Abort CC on detecting error is supported on this adapter. Values:No(0),Yes(1)</p> SNMP agent abortCConErrorSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Devices in adapter $1 <p>Physical devices present in this adapter.</p> SNMP agent pdPresentCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB FW requires application to set up power state before conf change on adapter $1 <p>FW requires application to set power state before configuration changes. Required(1), Not Required(0)</p> SNMP agent setPowerStateForCfg[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 Controller Serial Number <p>Controller serial number</p> SNMP agent serialNo[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Self Diagnostic Support for adapter $1 <p>Controller supports self diagnostic. Values:false(0),true(1)</p> SNMP agent selfDiagnosticSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Security Support for adapter $1 <p>Displays the security support. if supported (1) , not supported (0)</p> SNMP agent securitySupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Board Revision ID for adapter $1 <p>Board revision ID for this Adapter.</p> SNMP agent revisionIdentifier[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Revertible Hotspares Support for adapter $1 <p>Revertible HotSpares support for this adapter. Values:false(0),true(1)</p> SNMP agent revertibleHotSparesSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Reconstruction Rate on adapter $1 <p>Reconstruction rate on this Adapter.</p> SNMP agent reconstructionRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Reconstruction Rate Change Support for adapter $1 <p>Reconstruction rate change support for this adapter. Values:false(0),true(1)</p> SNMP agent reconRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Rebuilding Rate Change Support for adapter $1 <p>Rebuilding rate change support for this Adapter. Values:false(0),true(1)</p> SNMP agent rbldRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 Product Name <p>Product name e.g. MegaRAID SAS-8E, MegaRAID SAS-4X, etc.</p> SNMP agent productName[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Prevent import of SAS Pi protected LD on adapter $1 <p>1=Prevent import of SAS PI protected logical disks , 0=Not Prevent import of SAS PI protected logical disks</p> SNMP agent preventPIImport[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Predictive Fail Poll Interval on adapter $1 <p>Number of seconds between precdictive fail polls on this adapter.</p> SNMP agent predFailPollInterval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Peer Controller Status on adapter $1 <p>This field gives the Peer controller Status</p> SNMP agent peerControllerStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Disk Devices in adapter $1 <p>Physical disk devices present in this adapter.</p> SNMP agent pdDiskPresentCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spin Down Time on adapter $1 <p>SpinDownTime in minutes</p> SNMP agent spinDownTime[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Disk Devices with pre-fail state on adapter $1 <p>Number of disk devices in this adapter that are critical</p> SNMP agent pdDiskPredFailureCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Failed Physical Disk Devices on adapter $1 <p>Number of disk devices in this adapter that are failed</p> SNMP agent pdDiskFailedCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Patrol Read Rate on adapter $1 <p>Patrol Read Rate for this adapter.</p> SNMP agent patrolReadRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Patrol Read Rate Change Support for adapter $1 <p>Patrol read rate change support for this adapter. Values:false(0),true(1)</p> SNMP agent patrolRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Logical Drives per Array in configuration on adapter $1 <p>Max LD’s per Array in configuration</p> SNMP agent partitionsInDDF[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB NVRAM size on adapter $1 <p>NVRAM size in KB for this adapter.</p> SNMP agent nvramSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Multipath Support for adapter $1 <p>Multipath is supported or not supported on this adapter.Values:not supported(0),supported(1)</p> SNMP agent multipathSupport[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Memory size on adapter $1 <p>Memory size in MB for this adapter.</p> SNMP agent memorySize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum no of Virtual Drives supported for adapter $1 <p>Maximum number of Virtual Drives supported for this adapter.</p> SNMP agent maxVDs[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum spans per Virtual Drive supported for adapter $1 <p>Maximum spans per Virtual Drive supported for this Adapter.</p> SNMP agent maxSpans[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB maximum Scatter Gather Element count allowed on adapter $1 <p>The maximum Scatter Gather Element count allowed on this adapter.</p> SNMP agent maxSGECount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Data Transfer Size on adapter $1 <p>The maximum data transfer size in sectors, on this adapter.</p> SNMP agent maxRequestSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Logical Drives per Array on adapter $1 <p>Max Ld’s per array in adapter</p> SNMP agent maxLdsPerArray[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spanning Support for adapter $1 <p>Spanning support for this adapter. Values:false(0),true(1)</p> SNMP agent spanningAllowedSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Delay among spinup groups for this adapter $1 <p>Number of seconds to delay among spinup groups for this adapter.</p> SNMP agent spinupDelay[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Configurable SSC Size on adapter $1 <p>This field give the information about maximum Size of SSC that can yet be configured,in GB</p> SNMP agent maximumCacheSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB PI Support for adapter $1 <p>Displays the support PI. 1=LD SAS PI Type 0, 0=LD Not SAS PI Type 0</p> SNMP agent supportPIcontroller[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Virtual Devices in adapter $1 <p>Virtual devices present in this adapter.</p> SNMP agent vdPresentCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Offline Virtual Devices in adapter $1 <p>Number of virtual devices in this adapter that are offline</p> SNMP agent vdOfflineCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Degraded Virtual Devices in adapter $1 <p>Number of virtual devices in this adapter that are critical</p> SNMP agent vdDegradedCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Emergency Spare Drive possible drive on adapter $1 <p>This field give the information about Emergency Spare possible Drive types(Uncongiured Good/Global Hotspare)</p> SNMP agent useEmergencySpare[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Use Emergency Spares for SMARTer on adapter $1 <p>1 =Use Emergency spares for SMARTer ,0 =Not Use Emergency spares for SMARTer</p> SNMP agent useEmergencySparesforSMARTer[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Total Space used for MetaData on adapter $1 <p>Total Space used for MetaData</p> SNMP agent totalSpaceformetadata[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Currently Confugured Total Cache Size on adapter $1 <p>This field give the information about total Size of currently configured SSC,in GB</p> SNMP agent totalCacheSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Topology Types info for adapter $1 <p>This field gives the Topology Type</p> SNMP agent topologyType[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Raid On Chip Temperature on adapter $1 <p>temperature of RAID On Chip in Celsius</p> SNMP agent temperatureROC[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller Temperature on adapter $1 <p>temperature of controller in Celsius</p> SNMP agent temperatureCtrl[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SATA Drive Support on adapter $1 <p>SATA physical drive support. Values:notSupported(0), supported(1)</p> SNMP agent supportsSATA[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SAS Drive Support on adapter $1 <p>SAS physical drive support. Values:notSupported(0), supported(1)</p> SNMP agent supportsSAS[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB PD shield state support on adapter $1 <p>1=Support PD shield state, 0=Not Support PD shield state</p> SNMP agent supportShieldState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Online Firmware Update Support on adapter $1 <p>1=Online firmware update is supported, 0=Online firmware update is not supported</p> SNMP agent supportOnlineFWUpdate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum number of drives to spin up at one time for adapter $1 <p>Maximum number of drives to spin up at one time for this adapter.</p> SNMP agent spinupDriveCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB FastPath WriteBack Support on Raptor LD for adapter $1 <p>1=Support Fast Path WB on Raptor Type Ld, 0=Does not support Fast Path WB on Raptor Type Ld</p> SNMP agent supportFastPathWB[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Read Policy Support on adapter $1 <p>Read policy support. Values: false(0), true(1)</p> SNMP agent supportedReadPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Minimum Stripe Size Supported on adapter $1 <p>Minimum stripe size supported. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) … 11(1MB) etc</p> SNMP agent supportedMinSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Stripe Size Supported on adapter $1 <p>Maximum stripe size supported. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) … 11(1MB) etc</p> SNMP agent supportedMaxSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB IO Policy Support on adapter $1 <p>IO policy support. Values: false(0), true(1)</p> SNMP agent supportedIOPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Access Policy Support on adapter $1 <p>Access policy support. Values: false(0), true(1)</p> SNMP agent supportedAccessPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Configuration Auto Balance Support on adapter $1 <p>0=no configuration auto balance support, 1=configuration auto balance support is present</p> SNMP agent supportConfigAutoBalance[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Break Mirror Operation Support on adapter $1 <p>1=Support break mirror operation,0=Do not Support break mirror operation</p> SNMP agent supportBreakMirror[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Sub-Vendor ID <p>PCI Sub-Vendor ID for this adapter.</p> SNMP agent subVendorID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Sub-Device ID <p>PCI Sub-Device ID for this adapter.</p> SNMP agent subDevID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Copy back on SSD on SMART error on adapter $1 <p>Copyback to SSD on SMART error. Values Enabled(0),Disabled(1)</p> SNMP agent ssdSMARTerEnabled[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Drives to Spin Up in Enclosure on adapter $1 <p>Maximum number of drives that can be spin up in an enclosure</p> SNMP agent spinupEnclDriveCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Delay Betwen Drive Spin Up in Enclosure on adapter $1 <p>Delay between drive spin up for drives within an enclosure</p> SNMP agent spinupEnclDelay[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum no of HA nodes supported by FW on adapter $1 <p>This field gives the HA nodes this FW supports</p> SNMP agent maximumControllerNodes[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum number of drives to spinup within 60 sec for direct attached drives for adapter $1 <p>Maximum number of drives to spinup within 60 sec for direct attached drives</p> SNMP agent maxDAPdCountSpinup60[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Abort Consistency Check on error Adapter $1 <p>Abort CC on detecting error is enabled or disabled on this adapter. Values:No(0),Yes(1),NA(2)</p> SNMP agent abortCConError[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Cache Flush Interval on adapter $1 <p>Cache flush interval in seconds for this adapter.</p> SNMP agent cacheFlushInterval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Device ID <p>PCI Device ID for this Adapter.</p> SNMP agent devID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB adapter $1 default power saving policy <p>power saving policy.values:controller default power saving policy=0, AUTO=1, MAX=2, Max with no cache=6, NONE=255</p> SNMP agent defaultLdPSPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Dedicated Hotspares Support for adapter $1 <p>Dedicated HotSpares support for this adapter. Values:false(0),true(1)</p> SNMP agent dedicatedHotSparesSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller SAS Addresses on adapter $1 <p>This field gives the controller SAS address</p> SNMP agent ctrlSasAddr[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB CopyBack state on adapter $1 <p>CopyBack is enabled or disabled on this adapter.Values:disabled(0),enabled(1)</p> SNMP agent copyBackState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Compatibility info for adapter $1 <p>Compatibility Information. Format->(Firmware Forward compatibility flag:Firmware Backward compatibility flag:Firmware version flag:Application Forward compatibility flag:Application Backward compatibility flag:Application version flag)</p> SNMP agent compatibilityInfo[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Compatibility for adapter $1 <p>To inform compatibilities between Applications and FW. 0->incompatible;1->compatible</p> SNMP agent compatibilityFlag[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Drive Capacity Coercion Mode on adapter $1 <p>Drive capacity coercion mode. 0->None;1->128MB;2->1GB</p> SNMP agent coercionMode[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Cluster Support for adapter $1 <p>Cluster support for this adapter. Values:false(0),true(1)</p> SNMP agent clusterSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Cluster State on adapter $1 <p>Cluster is enabled or disabled on this adapter. Values:disabled(0),enabled(1)</p> SNMP agent clusterState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Consistency Check Rate on adapter $1 <p>Consistency Check rate on this Adapter.</p> SNMP agent ccRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Consistensy Check Rate Change Support for adapter $1 <p>Consistency Check rate change support for this Adapter. Values:false(0),true(1)</p> SNMP agent ccRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller Cache pinned for missing or offline LDs on adapter $1 <p>1=controller cache is pinned for missing or offline LDs</p> SNMP agent cacheIsPinned[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB BIOS Not Detected Support on adapter $1 <p>bios Not Detected support for this Adapter. Values:false(0),true(1)</p> SNMP agent biosNotDetected[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device Interface Port Count on Adapter $1 <p>Device Port Count on this adapter.</p> SNMP agent devInterfacePortCnt[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Background Initialization Rate on adapter $1 <p>Background initialization rate for this adapter.</p> SNMP agent bgiRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Background Initialization Rate Change Support for adapter $1 <p>Background initialization rate change support for this adapter. Values:false(0),true(1)</p> SNMP agent bgiRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Battery Backup Unit Support for adapter $1 <p>BBU support for this adapter. Values:false(0),true(1)</p> SNMP agent bbuSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Allow SAS/SATA SSD within LD on adapter $1 <p>allow SAS/SATA SSD mix within an LD. allow(1), not allow(0)</p> SNMP agent allowSSDMixInLD[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SATA in Cluster Support on adapter $1 <p>SataInCluster support. Values:notSupported(0), supported(1)</p> SNMP agent allowSataInCluster[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Allow SSD/HDD Mix within LD on adapter $1 <p>allow SSD/HDD mix within an LD.allow(1), not allow(0)</p> SNMP agent allowMixSSDHDDInLD[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Mix in Virtual Drive Support on adapter $1 <p>MixInVIRTUALDRIVE support. Values:notSupported(0), supported(1)</p> SNMP agent allowMixInVD[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Mix in Enclosure Support on adapter $1 <p>Mix InEnclosure support. Values:notSupported(0), supported(1)</p> SNMP agent allowMixInEnclosure[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Mixer Redundancy Support for adapter $1 <p>Allow different Virtual Disk on the same array to have different redundancy levels. Values:false(0),true(1)</p> SNMP agent allowMixedRedundancyOnArraySupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller encryption support on adapter $1 <p>if it is set (1) supports controller encryption</p> SNMP agent allowCtrlEncryption[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Alarm State on adapter $1 <p>Alarm is enabled or disabled on this adapter. Values:disabled(0),enabled(1)</p> SNMP agent alarmState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Alarm Control Support for adapter $1 <p>Alarm control support for this adapter. Values:false(0),true(1)</p> SNMP agent alarmControlSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Vendor ID <p>PCI Vendor ID for this Adapter.</p> SNMP agent adapterVendorID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device Interface Port Addresses on Adapter $1 <p>Device Port address comma delimited</p> SNMP agent devInterfacePortAddr[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Multiple Device Interface Support Values for Adapter $1 <p>Multiple device interface support values separated by space.</p> SNMP agent devInterface[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Parallel Commands Supported on adapter $1 <p>The maximum parallel commands supported on this adapter.</p> SNMP agent maxConcurrentCmds[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Host Interface Port Address for Adapter $1 <p>Port address comma delimited</p> SNMP agent hostInterfacePortAddr[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum no of arrays supported for adapter $1 <p>Maximum no of arrays supported for this adapter.</p> SNMP agent maxArrays[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum arms per Virtual Drive supported for adapter $1 <p>Maximum arms per Virtual Drive supported for this Adapter.</p> SNMP agent maxArms[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Firmware support for Maintenance Mode on adapter $1 <p>1=FW supports maintenance mode</p> SNMP agent maintenanceMode[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Lock Key Not BackedUp Support on adapter $1 <p>lock Key Not Backedup support for this Adapter. Values:false(0),true(1)</p> SNMP agent lockKeyNotBackedup[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Lock Key Failed Support on adapter $1 <p>lock Key Failed support for this Adapter. Values:false(0),true(1)</p> SNMP agent lockKeyFailed[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Type of lock key binding for adapter $1 <p>Type of lock key binding. lock key is not bound(0),lock key bound to FW secret key(1), lock key bound to user(2), lock key bound to a TPM(3)</p> SNMP agent lockKeyBinding[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Lock Key Assigned Support on adapter $1 <p>Lock key Assigned support for this Adapter. Values:false(0),true(1)</p> SNMP agent lockKeyAssigned[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Bad Block Management State on adapter $1 <p>1=LD bad block management is enabled, 0=LD bad block management is not enabled</p> SNMP agent ldbbm[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Interrupt throttle completion hold time on adapter $1 <p>Interrupt throttle completion hold time on this adapter.</p> SNMP agent intThrottleTimeUs[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Interrupt throttle active count on adapter $1 <p>Interrupt throttle active count on this adapter.</p> SNMP agent intThrottleCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Incompatibility details for adapter $1 <p>This field gives the Incompatibility Details</p> SNMP agent incompatibilityDetails[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Host Interface for Adapter $1 <p>Host interface information for this adapter. Values:N/A(0),PCIX(1),PCIE(2),iSCSI(3),SAS-3G(4)</p> SNMP agent hostInterface[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Host Interface Port Count for Adapter $1 <p>Port Count on this adapter.</p> SNMP agent hostInterfacePortCnt[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Foreign Import Support for adapter $1 <p>Support foreign config import on this adapter. Values:false(0),true(1)</p> SNMP agent foreignConfigImportSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Large IO Support on adapter $1 <p>0=Large IO is supported, 1=Large IO is unsupported</p> SNMP agent disableLargeIO[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Drive force Rebuild Support on adapter $1 <p>Physical drive force Rebuild operation support. Values:notSupported(0), supported(1)</p> SNMP agent forceRebuild[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Drive force Online Support on adapter $1 <p>Physical drive force Online operation support. Values:notSupported(0), supported(1)</p> SNMP agent forceOnline[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Drive force Offline Support on adapter $1 <p>Physical drive force Offline operation support. Values:notSupported(0), supported(1)</p> SNMP agent forceOffline[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Flash size on adapter $1 <p>Flash size in MB for this adapter.</p> SNMP agent flashSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Firmware Version for adapter $1 <p>Firmware version Format->(Firmware Package Version:Version:Date:Time)</p> SNMP agent firmwareVersion[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Expander Firmware Version for adapter $1 <p>Expander firmware version - Not Available if expander is not present on the controller</p> SNMP agent expanderFirmwareVersion[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spin Down Unconfigured Drives on adapter $1 <p>Spin Down Unconfigured Drives(1), Do Not Spin Down Unconfigured Drives(0)</p> SNMP agent enableSpinDownUnconfigured[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Enable SAS Pi on adapter $1 <p>1 =Enable SAS PI for controller , 0 =Disable SAS PI for controller</p> SNMP agent enablePI[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Driver Version for adapter $1 <p>Driver version Format->(Driver Name:Version)</p> SNMP agent driverVersion[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Domain ID of adapter $1 <p>This field gives the Domain ID</p> SNMP agent domainId[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spin Down Hotspares on adapter $1 <p>Spin Down Hotspares(0), Do Not Spin Down Hotspares(1)</p> SNMP agent disableSpinDownHotSpare[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Logical Drive Power Saving disable time after 12:00AM on adapter $1 <p>LD power savings shall be disabled at xx minutes from 12:00am.</p> SNMP agent disableLdPSTime[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Interval for disabling power saving after power saving time on adapter $1 <p>LD power savings are disabled for yy hours beginning at disableLdPSTime.</p> SNMP agent disableLdPSInterval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SSC Support Write Caching IO’s on adapter $1 <p>1=SSC support write caching IOs, 0=SSC not support write caching IOs</p> SNMP agent writeCacheCapable[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Adapter Port(s) to which it is connected <p>Adapter port(s) to which the device is connected.</p> SNMP agent connectedAdapterPort[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Supported Speed for Device $1 <p>Maximum supported speed. Values:speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3)</p> SNMP agent deviceSpeed[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Ready for Removal <p>If true, drive is ready for removal. Values:false(0),true(1)</p> SNMP agent disabledForRemoval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Negotiated Link Speed for Device $1 <p>Negotiated link speed. Values:speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3)</p> SNMP agent linkSpeed[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Media Error Count of Device $1 <p>Error count of the device</p> SNMP agent mediaErrCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Certtified by OEM <p>Is the drive certified by the OEM (OEM-specific checks). Values:notCertified(1), Certified(0)</p> SNMP agent oemCertified[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Supported by OEM <p>Is the drive supported by the OEM (OEM-specific checks). Values:notSupported(1), supported(0)</p> SNMP agent oemSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Operation progress for Device $1 <p>Operation progress in %. e.g. Rebuild progress is 10%</p> SNMP agent operationProgress[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Other Error Count of Device $1 <p>Error count of the device</p> SNMP agent otherErrCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Firmware Interpretation of state of Device $1 <p>Firmware’s interpretation of drive state. Values:unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(32),system(64),UNCONFIGURED-SHIELDED(128),HOTSPARE-SHIELDED(130),CONFIGURED-SHIELDED(144)</p> SNMP agent pdState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Temperature <p>Physical Drive temperature in Celsius</p> SNMP agent pdTemperature[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Predictive Fail Count of Device $1 <p>Predictive fail count of the device</p> SNMP agent predFailCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Type of Device $1 <p>Type of this Device. Values:disk(0),tape(1),printer(2),processor(3),cdrom(5),scanner(6),optical(7),enclosure(13),dvd(10),unknown(31)</p> SNMP agent scsiDevType[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>

Triggers

Name Description Expression Priority
Critical temperature on Raid on Chip for adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])>115</p><p>Recovery expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])<105</p> high
Degraded Virtual devices on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/vdDegradedCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Disks with pre-fail state detected on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdDiskPredFailureCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Failed disks detected on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdDiskFailedCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
High temperature on Raid on Chip for adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])>90</p><p>Recovery expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])<80</p> average
Offline Virtual devices on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/vdOfflineCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Failed state for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=17</p><p>Recovery expression: </p> high
MegaRAID Device {#SNMPVALUE} not certified by OEM <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/oemCertified[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> average
MegaRAID Device {#SNMPVALUE} Temperature too high <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdTemperature[{#SNMPVALUE}])>50</p><p>Recovery expression: last(/SNMP MegaRAID SAS/pdTemperature[{#SNMPVALUE}])<47</p> high
Rebuilding state for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=20</p><p>Recovery expression: </p> warning
Unconfigured Bad state for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=1</p><p>Recovery expression: </p> high
Unknown Negotiated Link Speed for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/linkSpeed[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> high
Critical temperature on Raid on Chip for adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])>115</p><p>Recovery expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])<105</p> high
Degraded Virtual devices on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/vdDegradedCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Disks with pre-fail state detected on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdDiskPredFailureCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Failed disks detected on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdDiskFailedCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
High temperature on Raid on Chip for adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])>90</p><p>Recovery expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])<80</p> average
Offline Virtual devices on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/vdOfflineCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Failed state for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=17</p><p>Recovery expression: </p> high
MegaRAID Device {#SNMPVALUE} not certified by OEM (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/oemCertified[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> average
MegaRAID Device {#SNMPVALUE} Temperature too high (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdTemperature[{#SNMPVALUE}])>50</p><p>Recovery expression: last(/SNMP MegaRAID SAS/pdTemperature[{#SNMPVALUE}])<47</p> high
Rebuilding state for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=20</p><p>Recovery expression: </p> warning
Unconfigured Bad state for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=1</p><p>Recovery expression: </p> high
Unknown Negotiated Link Speed for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/linkSpeed[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> high

SNMP MegaRAID SAS

Description

Zabbix Template for Avago Megaraid SAS (formerly LSI) RAID cards

Overview

This is initial template for Monitoring LSI/Avago/Broadcom (or branded like Intel, IBM, Supermicro etc) MegaRAID based hardware RAID cards. According to vendor docs it should also support non-RAID adapters, enclosures and some other devices.

It took me one night to complete major/required parts, so far template supports most of the options and all the critical components to keep you warned in case some RAID-related problems will occur.

Supported so far:

Planned:

Not tested yet:

Installation and Requirements:

Bugs?
-> Please Report @GitHub or at giomac gmail com

When will you finish this?
-> Nah, all critical issues are included, will do, definitely, but not asap

Author

George Machitidze

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
MegaRAID SAS MIB SAS adapters <p>A List of adapter Entries containing Information/Properties about the MegaRAID related adapters on host.</p> SNMP agent adapterID<p>Update: 900</p>
MegaRAID SAS MIB SAS devices <p>A List of device Entries containing Information/Properties about the MegaRAID related devices on host.</p> SNMP agent physDevID<p>Update: 60</p>

Items collected

Name Description Type Key and additional info
MegaRAID SAS MIB Agent Module Version <p>-</p> SNMP agent agentModuleVersion<p>Update: 60</p>
MegaRAID SAS MIB Number of SAS adapters present <p>-</p> SNMP agent adpNumber<p>Update: 60</p>
MegaRAID SAS MIB Version <p>-</p> SNMP agent mibVersion<p>Update: 60</p>
MegaRAID SAS MIB Agent Module Name <p>-</p> SNMP agent agentModuleName<p>Update: 60</p>
MegaRAID SAS MIB Abort CC on detecting error support for adapter $1 <p>Abort CC on detecting error is supported on this adapter. Values:No(0),Yes(1)</p> SNMP agent abortCConErrorSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Devices in adapter $1 <p>Physical devices present in this adapter.</p> SNMP agent pdPresentCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB FW requires application to set up power state before conf change on adapter $1 <p>FW requires application to set power state before configuration changes. Required(1), Not Required(0)</p> SNMP agent setPowerStateForCfg[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 Controller Serial Number <p>Controller serial number</p> SNMP agent serialNo[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Self Diagnostic Support for adapter $1 <p>Controller supports self diagnostic. Values:false(0),true(1)</p> SNMP agent selfDiagnosticSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Security Support for adapter $1 <p>Displays the security support. if supported (1) , not supported (0)</p> SNMP agent securitySupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Board Revision ID for adapter $1 <p>Board revision ID for this Adapter.</p> SNMP agent revisionIdentifier[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Revertible Hotspares Support for adapter $1 <p>Revertible HotSpares support for this adapter. Values:false(0),true(1)</p> SNMP agent revertibleHotSparesSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Reconstruction Rate on adapter $1 <p>Reconstruction rate on this Adapter.</p> SNMP agent reconstructionRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Reconstruction Rate Change Support for adapter $1 <p>Reconstruction rate change support for this adapter. Values:false(0),true(1)</p> SNMP agent reconRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Rebuilding Rate Change Support for adapter $1 <p>Rebuilding rate change support for this Adapter. Values:false(0),true(1)</p> SNMP agent rbldRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 Product Name <p>Product name e.g. MegaRAID SAS-8E, MegaRAID SAS-4X, etc.</p> SNMP agent productName[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Prevent import of SAS Pi protected LD on adapter $1 <p>1=Prevent import of SAS PI protected logical disks , 0=Not Prevent import of SAS PI protected logical disks</p> SNMP agent preventPIImport[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Predictive Fail Poll Interval on adapter $1 <p>Number of seconds between precdictive fail polls on this adapter.</p> SNMP agent predFailPollInterval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Peer Controller Status on adapter $1 <p>This field gives the Peer controller Status</p> SNMP agent peerControllerStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Disk Devices in adapter $1 <p>Physical disk devices present in this adapter.</p> SNMP agent pdDiskPresentCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spin Down Time on adapter $1 <p>SpinDownTime in minutes</p> SNMP agent spinDownTime[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Disk Devices with pre-fail state on adapter $1 <p>Number of disk devices in this adapter that are critical</p> SNMP agent pdDiskPredFailureCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Failed Physical Disk Devices on adapter $1 <p>Number of disk devices in this adapter that are failed</p> SNMP agent pdDiskFailedCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Patrol Read Rate on adapter $1 <p>Patrol Read Rate for this adapter.</p> SNMP agent patrolReadRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Patrol Read Rate Change Support for adapter $1 <p>Patrol read rate change support for this adapter. Values:false(0),true(1)</p> SNMP agent patrolRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Logical Drives per Array in configuration on adapter $1 <p>Max LD’s per Array in configuration</p> SNMP agent partitionsInDDF[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB NVRAM size on adapter $1 <p>NVRAM size in KB for this adapter.</p> SNMP agent nvramSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Multipath Support for adapter $1 <p>Multipath is supported or not supported on this adapter.Values:not supported(0),supported(1)</p> SNMP agent multipathSupport[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Memory size on adapter $1 <p>Memory size in MB for this adapter.</p> SNMP agent memorySize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum no of Virtual Drives supported for adapter $1 <p>Maximum number of Virtual Drives supported for this adapter.</p> SNMP agent maxVDs[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum spans per Virtual Drive supported for adapter $1 <p>Maximum spans per Virtual Drive supported for this Adapter.</p> SNMP agent maxSpans[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB maximum Scatter Gather Element count allowed on adapter $1 <p>The maximum Scatter Gather Element count allowed on this adapter.</p> SNMP agent maxSGECount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Data Transfer Size on adapter $1 <p>The maximum data transfer size in sectors, on this adapter.</p> SNMP agent maxRequestSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Logical Drives per Array on adapter $1 <p>Max Ld’s per array in adapter</p> SNMP agent maxLdsPerArray[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spanning Support for adapter $1 <p>Spanning support for this adapter. Values:false(0),true(1)</p> SNMP agent spanningAllowedSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Delay among spinup groups for this adapter $1 <p>Number of seconds to delay among spinup groups for this adapter.</p> SNMP agent spinupDelay[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Configurable SSC Size on adapter $1 <p>This field give the information about maximum Size of SSC that can yet be configured,in GB</p> SNMP agent maximumCacheSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB PI Support for adapter $1 <p>Displays the support PI. 1=LD SAS PI Type 0, 0=LD Not SAS PI Type 0</p> SNMP agent supportPIcontroller[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Virtual Devices in adapter $1 <p>Virtual devices present in this adapter.</p> SNMP agent vdPresentCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Offline Virtual Devices in adapter $1 <p>Number of virtual devices in this adapter that are offline</p> SNMP agent vdOfflineCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Degraded Virtual Devices in adapter $1 <p>Number of virtual devices in this adapter that are critical</p> SNMP agent vdDegradedCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Emergency Spare Drive possible drive on adapter $1 <p>This field give the information about Emergency Spare possible Drive types(Uncongiured Good/Global Hotspare)</p> SNMP agent useEmergencySpare[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Use Emergency Spares for SMARTer on adapter $1 <p>1 =Use Emergency spares for SMARTer ,0 =Not Use Emergency spares for SMARTer</p> SNMP agent useEmergencySparesforSMARTer[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Total Space used for MetaData on adapter $1 <p>Total Space used for MetaData</p> SNMP agent totalSpaceformetadata[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Currently Confugured Total Cache Size on adapter $1 <p>This field give the information about total Size of currently configured SSC,in GB</p> SNMP agent totalCacheSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Topology Types info for adapter $1 <p>This field gives the Topology Type</p> SNMP agent topologyType[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Raid On Chip Temperature on adapter $1 <p>temperature of RAID On Chip in Celsius</p> SNMP agent temperatureROC[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller Temperature on adapter $1 <p>temperature of controller in Celsius</p> SNMP agent temperatureCtrl[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SATA Drive Support on adapter $1 <p>SATA physical drive support. Values:notSupported(0), supported(1)</p> SNMP agent supportsSATA[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SAS Drive Support on adapter $1 <p>SAS physical drive support. Values:notSupported(0), supported(1)</p> SNMP agent supportsSAS[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB PD shield state support on adapter $1 <p>1=Support PD shield state, 0=Not Support PD shield state</p> SNMP agent supportShieldState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Online Firmware Update Support on adapter $1 <p>1=Online firmware update is supported, 0=Online firmware update is not supported</p> SNMP agent supportOnlineFWUpdate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum number of drives to spin up at one time for adapter $1 <p>Maximum number of drives to spin up at one time for this adapter.</p> SNMP agent spinupDriveCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB FastPath WriteBack Support on Raptor LD for adapter $1 <p>1=Support Fast Path WB on Raptor Type Ld, 0=Does not support Fast Path WB on Raptor Type Ld</p> SNMP agent supportFastPathWB[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Read Policy Support on adapter $1 <p>Read policy support. Values: false(0), true(1)</p> SNMP agent supportedReadPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Minimum Stripe Size Supported on adapter $1 <p>Minimum stripe size supported. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) … 11(1MB) etc</p> SNMP agent supportedMinSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Stripe Size Supported on adapter $1 <p>Maximum stripe size supported. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) … 11(1MB) etc</p> SNMP agent supportedMaxSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB IO Policy Support on adapter $1 <p>IO policy support. Values: false(0), true(1)</p> SNMP agent supportedIOPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Access Policy Support on adapter $1 <p>Access policy support. Values: false(0), true(1)</p> SNMP agent supportedAccessPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Configuration Auto Balance Support on adapter $1 <p>0=no configuration auto balance support, 1=configuration auto balance support is present</p> SNMP agent supportConfigAutoBalance[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Break Mirror Operation Support on adapter $1 <p>1=Support break mirror operation,0=Do not Support break mirror operation</p> SNMP agent supportBreakMirror[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Sub-Vendor ID <p>PCI Sub-Vendor ID for this adapter.</p> SNMP agent subVendorID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Sub-Device ID <p>PCI Sub-Device ID for this adapter.</p> SNMP agent subDevID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Copy back on SSD on SMART error on adapter $1 <p>Copyback to SSD on SMART error. Values Enabled(0),Disabled(1)</p> SNMP agent ssdSMARTerEnabled[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Drives to Spin Up in Enclosure on adapter $1 <p>Maximum number of drives that can be spin up in an enclosure</p> SNMP agent spinupEnclDriveCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Delay Betwen Drive Spin Up in Enclosure on adapter $1 <p>Delay between drive spin up for drives within an enclosure</p> SNMP agent spinupEnclDelay[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum no of HA nodes supported by FW on adapter $1 <p>This field gives the HA nodes this FW supports</p> SNMP agent maximumControllerNodes[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum number of drives to spinup within 60 sec for direct attached drives for adapter $1 <p>Maximum number of drives to spinup within 60 sec for direct attached drives</p> SNMP agent maxDAPdCountSpinup60[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Abort Consistency Check on error Adapter $1 <p>Abort CC on detecting error is enabled or disabled on this adapter. Values:No(0),Yes(1),NA(2)</p> SNMP agent abortCConError[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Cache Flush Interval on adapter $1 <p>Cache flush interval in seconds for this adapter.</p> SNMP agent cacheFlushInterval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Device ID <p>PCI Device ID for this Adapter.</p> SNMP agent devID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB adapter $1 default power saving policy <p>power saving policy.values:controller default power saving policy=0, AUTO=1, MAX=2, Max with no cache=6, NONE=255</p> SNMP agent defaultLdPSPolicy[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Dedicated Hotspares Support for adapter $1 <p>Dedicated HotSpares support for this adapter. Values:false(0),true(1)</p> SNMP agent dedicatedHotSparesSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller SAS Addresses on adapter $1 <p>This field gives the controller SAS address</p> SNMP agent ctrlSasAddr[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB CopyBack state on adapter $1 <p>CopyBack is enabled or disabled on this adapter.Values:disabled(0),enabled(1)</p> SNMP agent copyBackState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Compatibility info for adapter $1 <p>Compatibility Information. Format->(Firmware Forward compatibility flag:Firmware Backward compatibility flag:Firmware version flag:Application Forward compatibility flag:Application Backward compatibility flag:Application version flag)</p> SNMP agent compatibilityInfo[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Compatibility for adapter $1 <p>To inform compatibilities between Applications and FW. 0->incompatible;1->compatible</p> SNMP agent compatibilityFlag[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Drive Capacity Coercion Mode on adapter $1 <p>Drive capacity coercion mode. 0->None;1->128MB;2->1GB</p> SNMP agent coercionMode[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Cluster Support for adapter $1 <p>Cluster support for this adapter. Values:false(0),true(1)</p> SNMP agent clusterSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Cluster State on adapter $1 <p>Cluster is enabled or disabled on this adapter. Values:disabled(0),enabled(1)</p> SNMP agent clusterState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Consistency Check Rate on adapter $1 <p>Consistency Check rate on this Adapter.</p> SNMP agent ccRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Consistensy Check Rate Change Support for adapter $1 <p>Consistency Check rate change support for this Adapter. Values:false(0),true(1)</p> SNMP agent ccRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller Cache pinned for missing or offline LDs on adapter $1 <p>1=controller cache is pinned for missing or offline LDs</p> SNMP agent cacheIsPinned[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB BIOS Not Detected Support on adapter $1 <p>bios Not Detected support for this Adapter. Values:false(0),true(1)</p> SNMP agent biosNotDetected[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device Interface Port Count on Adapter $1 <p>Device Port Count on this adapter.</p> SNMP agent devInterfacePortCnt[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Background Initialization Rate on adapter $1 <p>Background initialization rate for this adapter.</p> SNMP agent bgiRate[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Background Initialization Rate Change Support for adapter $1 <p>Background initialization rate change support for this adapter. Values:false(0),true(1)</p> SNMP agent bgiRateSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Battery Backup Unit Support for adapter $1 <p>BBU support for this adapter. Values:false(0),true(1)</p> SNMP agent bbuSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Allow SAS/SATA SSD within LD on adapter $1 <p>allow SAS/SATA SSD mix within an LD. allow(1), not allow(0)</p> SNMP agent allowSSDMixInLD[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SATA in Cluster Support on adapter $1 <p>SataInCluster support. Values:notSupported(0), supported(1)</p> SNMP agent allowSataInCluster[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Allow SSD/HDD Mix within LD on adapter $1 <p>allow SSD/HDD mix within an LD.allow(1), not allow(0)</p> SNMP agent allowMixSSDHDDInLD[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Mix in Virtual Drive Support on adapter $1 <p>MixInVIRTUALDRIVE support. Values:notSupported(0), supported(1)</p> SNMP agent allowMixInVD[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Mix in Enclosure Support on adapter $1 <p>Mix InEnclosure support. Values:notSupported(0), supported(1)</p> SNMP agent allowMixInEnclosure[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Mixer Redundancy Support for adapter $1 <p>Allow different Virtual Disk on the same array to have different redundancy levels. Values:false(0),true(1)</p> SNMP agent allowMixedRedundancyOnArraySupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Controller encryption support on adapter $1 <p>if it is set (1) supports controller encryption</p> SNMP agent allowCtrlEncryption[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Alarm State on adapter $1 <p>Alarm is enabled or disabled on this adapter. Values:disabled(0),enabled(1)</p> SNMP agent alarmState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Alarm Control Support for adapter $1 <p>Alarm control support for this adapter. Values:false(0),true(1)</p> SNMP agent alarmControlSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Adapter $1 PCI Vendor ID <p>PCI Vendor ID for this Adapter.</p> SNMP agent adapterVendorID[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device Interface Port Addresses on Adapter $1 <p>Device Port address comma delimited</p> SNMP agent devInterfacePortAddr[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Multiple Device Interface Support Values for Adapter $1 <p>Multiple device interface support values separated by space.</p> SNMP agent devInterface[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Parallel Commands Supported on adapter $1 <p>The maximum parallel commands supported on this adapter.</p> SNMP agent maxConcurrentCmds[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Host Interface Port Address for Adapter $1 <p>Port address comma delimited</p> SNMP agent hostInterfacePortAddr[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum no of arrays supported for adapter $1 <p>Maximum no of arrays supported for this adapter.</p> SNMP agent maxArrays[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum arms per Virtual Drive supported for adapter $1 <p>Maximum arms per Virtual Drive supported for this Adapter.</p> SNMP agent maxArms[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Firmware support for Maintenance Mode on adapter $1 <p>1=FW supports maintenance mode</p> SNMP agent maintenanceMode[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Lock Key Not BackedUp Support on adapter $1 <p>lock Key Not Backedup support for this Adapter. Values:false(0),true(1)</p> SNMP agent lockKeyNotBackedup[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Lock Key Failed Support on adapter $1 <p>lock Key Failed support for this Adapter. Values:false(0),true(1)</p> SNMP agent lockKeyFailed[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Type of lock key binding for adapter $1 <p>Type of lock key binding. lock key is not bound(0),lock key bound to FW secret key(1), lock key bound to user(2), lock key bound to a TPM(3)</p> SNMP agent lockKeyBinding[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Lock Key Assigned Support on adapter $1 <p>Lock key Assigned support for this Adapter. Values:false(0),true(1)</p> SNMP agent lockKeyAssigned[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Bad Block Management State on adapter $1 <p>1=LD bad block management is enabled, 0=LD bad block management is not enabled</p> SNMP agent ldbbm[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Interrupt throttle completion hold time on adapter $1 <p>Interrupt throttle completion hold time on this adapter.</p> SNMP agent intThrottleTimeUs[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Interrupt throttle active count on adapter $1 <p>Interrupt throttle active count on this adapter.</p> SNMP agent intThrottleCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Incompatibility details for adapter $1 <p>This field gives the Incompatibility Details</p> SNMP agent incompatibilityDetails[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Host Interface for Adapter $1 <p>Host interface information for this adapter. Values:N/A(0),PCIX(1),PCIE(2),iSCSI(3),SAS-3G(4)</p> SNMP agent hostInterface[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Host Interface Port Count for Adapter $1 <p>Port Count on this adapter.</p> SNMP agent hostInterfacePortCnt[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Foreign Import Support for adapter $1 <p>Support foreign config import on this adapter. Values:false(0),true(1)</p> SNMP agent foreignConfigImportSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Large IO Support on adapter $1 <p>0=Large IO is supported, 1=Large IO is unsupported</p> SNMP agent disableLargeIO[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Drive force Rebuild Support on adapter $1 <p>Physical drive force Rebuild operation support. Values:notSupported(0), supported(1)</p> SNMP agent forceRebuild[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Drive force Online Support on adapter $1 <p>Physical drive force Online operation support. Values:notSupported(0), supported(1)</p> SNMP agent forceOnline[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Physical Drive force Offline Support on adapter $1 <p>Physical drive force Offline operation support. Values:notSupported(0), supported(1)</p> SNMP agent forceOffline[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Flash size on adapter $1 <p>Flash size in MB for this adapter.</p> SNMP agent flashSize[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Firmware Version for adapter $1 <p>Firmware version Format->(Firmware Package Version:Version:Date:Time)</p> SNMP agent firmwareVersion[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Expander Firmware Version for adapter $1 <p>Expander firmware version - Not Available if expander is not present on the controller</p> SNMP agent expanderFirmwareVersion[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spin Down Unconfigured Drives on adapter $1 <p>Spin Down Unconfigured Drives(1), Do Not Spin Down Unconfigured Drives(0)</p> SNMP agent enableSpinDownUnconfigured[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Enable SAS Pi on adapter $1 <p>1 =Enable SAS PI for controller , 0 =Disable SAS PI for controller</p> SNMP agent enablePI[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Driver Version for adapter $1 <p>Driver version Format->(Driver Name:Version)</p> SNMP agent driverVersion[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Domain ID of adapter $1 <p>This field gives the Domain ID</p> SNMP agent domainId[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Spin Down Hotspares on adapter $1 <p>Spin Down Hotspares(0), Do Not Spin Down Hotspares(1)</p> SNMP agent disableSpinDownHotSpare[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Logical Drive Power Saving disable time after 12:00AM on adapter $1 <p>LD power savings shall be disabled at xx minutes from 12:00am.</p> SNMP agent disableLdPSTime[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Interval for disabling power saving after power saving time on adapter $1 <p>LD power savings are disabled for yy hours beginning at disableLdPSTime.</p> SNMP agent disableLdPSInterval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB SSC Support Write Caching IO’s on adapter $1 <p>1=SSC support write caching IOs, 0=SSC not support write caching IOs</p> SNMP agent writeCacheCapable[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Adapter Port(s) to which it is connected <p>Adapter port(s) to which the device is connected.</p> SNMP agent connectedAdapterPort[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Maximum Supported Speed for Device $1 <p>Maximum supported speed. Values:speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3)</p> SNMP agent deviceSpeed[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Ready for Removal <p>If true, drive is ready for removal. Values:false(0),true(1)</p> SNMP agent disabledForRemoval[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Negotiated Link Speed for Device $1 <p>Negotiated link speed. Values:speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3)</p> SNMP agent linkSpeed[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Media Error Count of Device $1 <p>Error count of the device</p> SNMP agent mediaErrCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Certtified by OEM <p>Is the drive certified by the OEM (OEM-specific checks). Values:notCertified(1), Certified(0)</p> SNMP agent oemCertified[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Supported by OEM <p>Is the drive supported by the OEM (OEM-specific checks). Values:notSupported(1), supported(0)</p> SNMP agent oemSupported[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Operation progress for Device $1 <p>Operation progress in %. e.g. Rebuild progress is 10%</p> SNMP agent operationProgress[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Other Error Count of Device $1 <p>Error count of the device</p> SNMP agent otherErrCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Firmware Interpretation of state of Device $1 <p>Firmware’s interpretation of drive state. Values:unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(32),system(64),UNCONFIGURED-SHIELDED(128),HOTSPARE-SHIELDED(130),CONFIGURED-SHIELDED(144)</p> SNMP agent pdState[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Device $1 Temperature <p>Physical Drive temperature in Celsius</p> SNMP agent pdTemperature[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Predictive Fail Count of Device $1 <p>Predictive fail count of the device</p> SNMP agent predFailCount[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>
MegaRAID SAS MIB Type of Device $1 <p>Type of this Device. Values:disk(0),tape(1),printer(2),processor(3),cdrom(5),scanner(6),optical(7),enclosure(13),dvd(10),unknown(31)</p> SNMP agent scsiDevType[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p>

Triggers

Name Description Expression Priority
Critical temperature on Raid on Chip for adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])>115</p><p>Recovery expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])<105</p> high
Degraded Virtual devices on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/vdDegradedCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Disks with pre-fail state detected on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdDiskPredFailureCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Failed disks detected on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdDiskFailedCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
High temperature on Raid on Chip for adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])>90</p><p>Recovery expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])<80</p> average
Offline Virtual devices on MegaRAID adapter {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/vdOfflineCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Failed state for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=17</p><p>Recovery expression: </p> high
MegaRAID Device {#SNMPVALUE} not certified by OEM <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/oemCertified[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> average
MegaRAID Device {#SNMPVALUE} Temperature too high <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdTemperature[{#SNMPVALUE}])>50</p><p>Recovery expression: last(/SNMP MegaRAID SAS/pdTemperature[{#SNMPVALUE}])<47</p> high
Rebuilding state for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=20</p><p>Recovery expression: </p> warning
Unconfigured Bad state for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=1</p><p>Recovery expression: </p> high
Unknown Negotiated Link Speed for MegaRAID Drive {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/linkSpeed[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> high
Critical temperature on Raid on Chip for adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])>115</p><p>Recovery expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])<105</p> high
Degraded Virtual devices on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/vdDegradedCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Disks with pre-fail state detected on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdDiskPredFailureCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Failed disks detected on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdDiskFailedCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
High temperature on Raid on Chip for adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])>90</p><p>Recovery expression: last(/SNMP MegaRAID SAS/temperatureROC[{#SNMPVALUE}])<80</p> average
Offline Virtual devices on MegaRAID adapter {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/vdOfflineCount[{#SNMPVALUE}])>0</p><p>Recovery expression: </p> high
Failed state for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=17</p><p>Recovery expression: </p> high
MegaRAID Device {#SNMPVALUE} not certified by OEM (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/oemCertified[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> average
MegaRAID Device {#SNMPVALUE} Temperature too high (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdTemperature[{#SNMPVALUE}])>50</p><p>Recovery expression: last(/SNMP MegaRAID SAS/pdTemperature[{#SNMPVALUE}])<47</p> high
Rebuilding state for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=20</p><p>Recovery expression: </p> warning
Unconfigured Bad state for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/pdState[{#SNMPVALUE}])=1</p><p>Recovery expression: </p> high
Unknown Negotiated Link Speed for MegaRAID Drive {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP MegaRAID SAS/linkSpeed[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> high