Template polling sensor data of a HP iLO100i
This templates monitors the HP iLO100i integrated lights-out system for available sensors.
Tested only on Zabbix 4.2.x with a iLO100i, possibly working on other iLOs aswell.
You need to configure the IPMI-Tab on any monitored host with a Username and Password. These can be set in the User Administration of the iLO-Card and only need “User” rights.
There are no triggers configured, alerts should be handled specifically for your own setup!
RegularAlicorn
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
P3V3 | <p>-</p> | IPMI agent |
vol.p3v3<p>Update: 1h</p> |
CPU ThermalTrip | <p>-</p> | IPMI agent |
proc.thermaltrip<p>Update: 15m</p> |
MLB inlet_1 | <p>-</p> | IPMI agent |
temp.mlb.inlet1<p>Update: 15m</p> |
Front dimm1 | <p>-</p> | IPMI agent |
temp.front.dimm1<p>Update: 15m</p> |
MULTI_BIT_ERR | <p>-</p> | IPMI agent |
board.multi.bit.err<p>Update: 15m</p> |
FH/FL riser2 | <p>-</p> | IPMI agent |
temp.fhfl.riser2<p>Update: 15m</p> |
Sys. ACPI Pwr. State | <p>-</p> | IPMI agent |
pwr.acpi.state<p>Update: 15m</p> |
FAIL_TO_PWR_ON | <p>-</p> | IPMI agent |
board.fail.to.pwr.on<p>Update: 15m</p> |
PVCORE1 | <p>-</p> | IPMI agent |
vol.pvcore1<p>Update: 1h</p> |
FH/FL riser1 | <p>-</p> | IPMI agent |
temp.fhfl.riser1<p>Update: 15m</p> |
FAN3_INLET | <p>-</p> | IPMI agent |
fan.3.inlet<p>Update: 15m</p> |
CPU1 Sensor | <p>-</p> | IPMI agent |
temp.cpu1<p>Update: 15m</p> |
CPU1_CATERR | <p>-</p> | IPMI agent |
proc.cpu1.caterr<p>Update: 15m</p> |
PS1 Status | <p>-</p> | IPMI agent |
pwr.state1<p>Update: 15m</p> |
PVTT-CPU1 | <p>-</p> | IPMI agent |
vol.pvtt.cpu1<p>Update: 1h</p> |
PROC1 DIMM1 | <p>-</p> | IPMI agent |
temp.proc1.dimm1<p>Update: 15m</p> |
PS2 Status | <p>-</p> | IPMI agent |
pwr.state2<p>Update: 15m</p> |
HH/LP riser | <p>-</p> | IPMI agent |
temp.hhlp.riser<p>Update: 15m</p> |
P3V3-STBY | <p>-</p> | IPMI agent |
vol.p3v3.stby<p>Update: 1h</p> |
VRD_PWRGOOD_FAIL | <p>-</p> | IPMI agent |
board.vrd.pwrgood.fail<p>Update: 15m</p> |
PVCORE2 | <p>-</p> | IPMI agent |
vol.pvcore2<p>Update: 1h</p> |
IOH_Temp | <p>-</p> | IPMI agent |
temp.ioh.temp<p>Update: 15m</p> |
PROC2 DIMM2 | <p>-</p> | IPMI agent |
temp.proc2.dimm2<p>Update: 15m</p> |
HH/LP outlet | <p>-</p> | IPMI agent |
temp.hhlp.outlet<p>Update: 15m</p> |
IOH IERR2 | <p>-</p> | IPMI agent |
board.ioh.ierr2<p>Update: 15m</p> |
MLB inlet_2 | <p>-</p> | IPMI agent |
temp.mlb.inlet2<p>Update: 15m</p> |
PROC2 DIMM4 | <p>-</p> | IPMI agent |
temp.proc2.dimm4<p>Update: 15m</p> |
PROC2 DIMM3 | <p>-</p> | IPMI agent |
temp.proc2.dimm3<p>Update: 15m</p> |
Rear dimm2 | <p>-</p> | IPMI agent |
temp.rear.dimm2<p>Update: 15m</p> |
FAN1_INLET | <p>-</p> | IPMI agent |
fan.1.inlet<p>Update: 15m</p> |
IOH inlet | <p>-</p> | IPMI agent |
temp.ioh.inlet<p>Update: 15m</p> |
IOH_NMI_DETECT | <p>-</p> | IPMI agent |
board.ioh.nmi.detect<p>Update: 15m</p> |
PVTT-CPU2 | <p>-</p> | IPMI agent |
vol.pvtt.cpu2<p>Update: 1h</p> |
Rear dimm1 | <p>-</p> | IPMI agent |
temp.rear.dimm1<p>Update: 15m</p> |
PROC2 DIMM6 | <p>-</p> | IPMI agent |
temp.proc2.dimm6<p>Update: 15m</p> |
Front Panel | <p>-</p> | IPMI agent |
temp.frontpanel<p>Update: 15m</p> |
P5V | <p>-</p> | IPMI agent |
vol.p5v<p>Update: 1h</p> |
IOH_THERMALERT_N | <p>-</p> | IPMI agent |
board.ioh.thermalert.n<p>Update: 15m</p> |
P5V-STBY | <p>-</p> | IPMI agent |
vol.p5v.stby<p>Update: 1h</p> |
FH/FL outlet | <p>-</p> | IPMI agent |
temp.fhfl.outlet<p>Update: 15m</p> |
P12V | <p>-</p> | IPMI agent |
vol.p12v<p>Update: 1h</p> |
P1V1_IOH | <p>-</p> | IPMI agent |
vol.p1v1.ioh<p>Update: 1h</p> |
PROC1 DIMM3 | <p>-</p> | IPMI agent |
temp.proc1.dimm3<p>Update: 15m</p> |
PSRed Status | <p>-</p> | IPMI agent |
pwr.psred.status<p>Update: 15m</p> |
PROC1 DIMM4 | <p>-</p> | IPMI agent |
temp.proc1.dimm4<p>Update: 15m</p> |
Rear dimm3 | <p>-</p> | IPMI agent |
temp.rear.dimm3<p>Update: 15m</p> |
MLB inlet_4 | <p>-</p> | IPMI agent |
temp.mlb.inlet4<p>Update: 15m</p> |
P1V5_DDR3_CPU1 | <p>-</p> | IPMI agent |
vol.p1v5.ddr3.cpu1<p>Update: 1h</p> |
P1V5_DDR3_CPU2 | <p>-</p> | IPMI agent |
vol.p1v5.ddr3.cpu2<p>Update: 1h</p> |
PROC1 DIMM2 | <p>-</p> | IPMI agent |
temp.proc1.dimm2<p>Update: 15m</p> |
IOH outlet | <p>-</p> | IPMI agent |
temp.ioh.outlet<p>Update: 15m</p> |
CPU2 Sensor | <p>-</p> | IPMI agent |
temp.cpu2<p>Update: 15m</p> |
MLB inlet_3 | <p>-</p> | IPMI agent |
temp.mlb.inlet3<p>Update: 15m</p> |
Front dimm2 | <p>-</p> | IPMI agent |
temp.front.dimm2<p>Update: 15m</p> |
Front dimm3 | <p>-</p> | IPMI agent |
temp.front.dimm3<p>Update: 15m</p> |
FAN2_INLET | <p>-</p> | IPMI agent |
fan.2.inlet<p>Update: 15m</p> |
PROC2 DIMM5 | <p>-</p> | IPMI agent |
temp.proc2.dimm5<p>Update: 15m</p> |
CPU2_PROCHOT | <p>-</p> | IPMI agent |
proc.cpu2.prochot<p>Update: 15m</p> |
PROC1 DIMM6 | <p>-</p> | IPMI agent |
temp.proc1.dimm6<p>Update: 15m</p> |
CPU2_CATERR | <p>-</p> | IPMI agent |
proc.cpu2.caterr<p>Update: 15m</p> |
2U_2HDD13_Outlet | <p>-</p> | IPMI agent |
board.2u.2hdd13.outlet<p>Update: 15m</p> |
PROC1 DIMM5 | <p>-</p> | IPMI agent |
temp.proc1.dimm5<p>Update: 15m</p> |
FAN4_INLET | <p>-</p> | IPMI agent |
fan.4.inlet<p>Update: 15m</p> |
PROC2 DIMM1 | <p>-</p> | IPMI agent |
temp.proc2.dimm1<p>Update: 15m</p> |
2U_2HDD14_Outlet | <p>-</p> | IPMI agent |
board.2u.2hdd14.outlet<p>Update: 15m</p> |
CPU1_PROCHOT | <p>-</p> | IPMI agent |
proc.cpu1.prochot<p>Update: 15m</p> |
There are no triggers in this template.
Template polling sensor data of a HP iLO100i
This templates monitors the HP iLO100i integrated lights-out system for available sensors.
Tested only on Zabbix 4.2.x with a iLO100i, possibly working on other iLOs aswell.
You need to configure the IPMI-Tab on any monitored host with a Username and Password. These can be set in the User Administration of the iLO-Card and only need “User” rights.
There are no triggers configured, alerts should be handled specifically for your own setup!
RegularAlicorn
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
CPU2_PROCHOT | <p>-</p> | IPMI agent |
proc.cpu2.prochot<p>Update: 15m</p> |
FAN4_INLET | <p>-</p> | IPMI agent |
fan.4.inlet<p>Update: 15m</p> |
PROC2 DIMM3 | <p>-</p> | IPMI agent |
temp.proc2.dimm3<p>Update: 15m</p> |
PVCORE2 | <p>-</p> | IPMI agent |
vol.pvcore2<p>Update: 1h</p> |
PVTT-CPU2 | <p>-</p> | IPMI agent |
vol.pvtt.cpu2<p>Update: 1h</p> |
PROC2 DIMM6 | <p>-</p> | IPMI agent |
temp.proc2.dimm6<p>Update: 15m</p> |
PROC1 DIMM4 | <p>-</p> | IPMI agent |
temp.proc1.dimm4<p>Update: 15m</p> |
FH/FL outlet | <p>-</p> | IPMI agent |
temp.fhfl.outlet<p>Update: 15m</p> |
P1V5_DDR3_CPU2 | <p>-</p> | IPMI agent |
vol.p1v5.ddr3.cpu2<p>Update: 1h</p> |
2U_2HDD13_Outlet | <p>-</p> | IPMI agent |
board.2u.2hdd13.outlet<p>Update: 15m</p> |
FAIL_TO_PWR_ON | <p>-</p> | IPMI agent |
board.fail.to.pwr.on<p>Update: 15m</p> |
CPU2_CATERR | <p>-</p> | IPMI agent |
proc.cpu2.caterr<p>Update: 15m</p> |
PROC2 DIMM4 | <p>-</p> | IPMI agent |
temp.proc2.dimm4<p>Update: 15m</p> |
PSRed Status | <p>-</p> | IPMI agent |
pwr.psred.status<p>Update: 15m</p> |
FH/FL riser1 | <p>-</p> | IPMI agent |
temp.fhfl.riser1<p>Update: 15m</p> |
P3V3-STBY | <p>-</p> | IPMI agent |
vol.p3v3.stby<p>Update: 1h</p> |
MLB inlet_4 | <p>-</p> | IPMI agent |
temp.mlb.inlet4<p>Update: 15m</p> |
HH/LP riser | <p>-</p> | IPMI agent |
temp.hhlp.riser<p>Update: 15m</p> |
P5V-STBY | <p>-</p> | IPMI agent |
vol.p5v.stby<p>Update: 1h</p> |
2U_2HDD14_Outlet | <p>-</p> | IPMI agent |
board.2u.2hdd14.outlet<p>Update: 15m</p> |
Front Panel | <p>-</p> | IPMI agent |
temp.frontpanel<p>Update: 15m</p> |
Sys. ACPI Pwr. State | <p>-</p> | IPMI agent |
pwr.acpi.state<p>Update: 15m</p> |
MLB inlet_1 | <p>-</p> | IPMI agent |
temp.mlb.inlet1<p>Update: 15m</p> |
PVCORE1 | <p>-</p> | IPMI agent |
vol.pvcore1<p>Update: 1h</p> |
MULTI_BIT_ERR | <p>-</p> | IPMI agent |
board.multi.bit.err<p>Update: 15m</p> |
P5V | <p>-</p> | IPMI agent |
vol.p5v<p>Update: 1h</p> |
IOH inlet | <p>-</p> | IPMI agent |
temp.ioh.inlet<p>Update: 15m</p> |
FAN2_INLET | <p>-</p> | IPMI agent |
fan.2.inlet<p>Update: 15m</p> |
Front dimm3 | <p>-</p> | IPMI agent |
temp.front.dimm3<p>Update: 15m</p> |
P1V1_IOH | <p>-</p> | IPMI agent |
vol.p1v1.ioh<p>Update: 1h</p> |
P12V | <p>-</p> | IPMI agent |
vol.p12v<p>Update: 1h</p> |
HH/LP outlet | <p>-</p> | IPMI agent |
temp.hhlp.outlet<p>Update: 15m</p> |
Rear dimm1 | <p>-</p> | IPMI agent |
temp.rear.dimm1<p>Update: 15m</p> |
Rear dimm3 | <p>-</p> | IPMI agent |
temp.rear.dimm3<p>Update: 15m</p> |
CPU1_CATERR | <p>-</p> | IPMI agent |
proc.cpu1.caterr<p>Update: 15m</p> |
PROC1 DIMM5 | <p>-</p> | IPMI agent |
temp.proc1.dimm5<p>Update: 15m</p> |
PROC1 DIMM1 | <p>-</p> | IPMI agent |
temp.proc1.dimm1<p>Update: 15m</p> |
PVTT-CPU1 | <p>-</p> | IPMI agent |
vol.pvtt.cpu1<p>Update: 1h</p> |
IOH_Temp | <p>-</p> | IPMI agent |
temp.ioh.temp<p>Update: 15m</p> |
IOH_THERMALERT_N | <p>-</p> | IPMI agent |
board.ioh.thermalert.n<p>Update: 15m</p> |
PROC2 DIMM1 | <p>-</p> | IPMI agent |
temp.proc2.dimm1<p>Update: 15m</p> |
CPU2 Sensor | <p>-</p> | IPMI agent |
temp.cpu2<p>Update: 15m</p> |
MLB inlet_3 | <p>-</p> | IPMI agent |
temp.mlb.inlet3<p>Update: 15m</p> |
P1V5_DDR3_CPU1 | <p>-</p> | IPMI agent |
vol.p1v5.ddr3.cpu1<p>Update: 1h</p> |
PROC2 DIMM5 | <p>-</p> | IPMI agent |
temp.proc2.dimm5<p>Update: 15m</p> |
FAN3_INLET | <p>-</p> | IPMI agent |
fan.3.inlet<p>Update: 15m</p> |
PS1 Status | <p>-</p> | IPMI agent |
pwr.state1<p>Update: 15m</p> |
FH/FL riser2 | <p>-</p> | IPMI agent |
temp.fhfl.riser2<p>Update: 15m</p> |
Rear dimm2 | <p>-</p> | IPMI agent |
temp.rear.dimm2<p>Update: 15m</p> |
CPU1 Sensor | <p>-</p> | IPMI agent |
temp.cpu1<p>Update: 15m</p> |
VRD_PWRGOOD_FAIL | <p>-</p> | IPMI agent |
board.vrd.pwrgood.fail<p>Update: 15m</p> |
IOH_NMI_DETECT | <p>-</p> | IPMI agent |
board.ioh.nmi.detect<p>Update: 15m</p> |
CPU1_PROCHOT | <p>-</p> | IPMI agent |
proc.cpu1.prochot<p>Update: 15m</p> |
IOH IERR2 | <p>-</p> | IPMI agent |
board.ioh.ierr2<p>Update: 15m</p> |
Front dimm2 | <p>-</p> | IPMI agent |
temp.front.dimm2<p>Update: 15m</p> |
PROC1 DIMM2 | <p>-</p> | IPMI agent |
temp.proc1.dimm2<p>Update: 15m</p> |
PROC1 DIMM6 | <p>-</p> | IPMI agent |
temp.proc1.dimm6<p>Update: 15m</p> |
MLB inlet_2 | <p>-</p> | IPMI agent |
temp.mlb.inlet2<p>Update: 15m</p> |
IOH outlet | <p>-</p> | IPMI agent |
temp.ioh.outlet<p>Update: 15m</p> |
CPU ThermalTrip | <p>-</p> | IPMI agent |
proc.thermaltrip<p>Update: 15m</p> |
PROC1 DIMM3 | <p>-</p> | IPMI agent |
temp.proc1.dimm3<p>Update: 15m</p> |
FAN1_INLET | <p>-</p> | IPMI agent |
fan.1.inlet<p>Update: 15m</p> |
P3V3 | <p>-</p> | IPMI agent |
vol.p3v3<p>Update: 1h</p> |
PS2 Status | <p>-</p> | IPMI agent |
pwr.state2<p>Update: 15m</p> |
Front dimm1 | <p>-</p> | IPMI agent |
temp.front.dimm1<p>Update: 15m</p> |
PROC2 DIMM2 | <p>-</p> | IPMI agent |
temp.proc2.dimm2<p>Update: 15m</p> |
There are no triggers in this template.
Template polling sensor data of a HP iLO100i
This templates monitors the HP iLO100i integrated lights-out system for available sensors.
Tested only on Zabbix 4.2.x with a iLO100i, possibly working on other iLOs aswell.
You need to configure the IPMI-Tab on any monitored host with a Username and Password. These can be set in the User Administration of the iLO-Card and only need “User” rights.
There are no triggers configured, alerts should be handled specifically for your own setup!
RegularAlicorn
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
CPU2_PROCHOT | <p>-</p> | IPMI agent |
proc.cpu2.prochot<p>Update: 15m</p> |
FAN4_INLET | <p>-</p> | IPMI agent |
fan.4.inlet<p>Update: 15m</p> |
PROC2 DIMM3 | <p>-</p> | IPMI agent |
temp.proc2.dimm3<p>Update: 15m</p> |
PVCORE2 | <p>-</p> | IPMI agent |
vol.pvcore2<p>Update: 1h</p> |
PVTT-CPU2 | <p>-</p> | IPMI agent |
vol.pvtt.cpu2<p>Update: 1h</p> |
PROC2 DIMM6 | <p>-</p> | IPMI agent |
temp.proc2.dimm6<p>Update: 15m</p> |
PROC1 DIMM4 | <p>-</p> | IPMI agent |
temp.proc1.dimm4<p>Update: 15m</p> |
FH/FL outlet | <p>-</p> | IPMI agent |
temp.fhfl.outlet<p>Update: 15m</p> |
P1V5_DDR3_CPU2 | <p>-</p> | IPMI agent |
vol.p1v5.ddr3.cpu2<p>Update: 1h</p> |
2U_2HDD13_Outlet | <p>-</p> | IPMI agent |
board.2u.2hdd13.outlet<p>Update: 15m</p> |
FAIL_TO_PWR_ON | <p>-</p> | IPMI agent |
board.fail.to.pwr.on<p>Update: 15m</p> |
CPU2_CATERR | <p>-</p> | IPMI agent |
proc.cpu2.caterr<p>Update: 15m</p> |
PROC2 DIMM4 | <p>-</p> | IPMI agent |
temp.proc2.dimm4<p>Update: 15m</p> |
PSRed Status | <p>-</p> | IPMI agent |
pwr.psred.status<p>Update: 15m</p> |
FH/FL riser1 | <p>-</p> | IPMI agent |
temp.fhfl.riser1<p>Update: 15m</p> |
P3V3-STBY | <p>-</p> | IPMI agent |
vol.p3v3.stby<p>Update: 1h</p> |
MLB inlet_4 | <p>-</p> | IPMI agent |
temp.mlb.inlet4<p>Update: 15m</p> |
HH/LP riser | <p>-</p> | IPMI agent |
temp.hhlp.riser<p>Update: 15m</p> |
P5V-STBY | <p>-</p> | IPMI agent |
vol.p5v.stby<p>Update: 1h</p> |
2U_2HDD14_Outlet | <p>-</p> | IPMI agent |
board.2u.2hdd14.outlet<p>Update: 15m</p> |
Front Panel | <p>-</p> | IPMI agent |
temp.frontpanel<p>Update: 15m</p> |
Sys. ACPI Pwr. State | <p>-</p> | IPMI agent |
pwr.acpi.state<p>Update: 15m</p> |
MLB inlet_1 | <p>-</p> | IPMI agent |
temp.mlb.inlet1<p>Update: 15m</p> |
PVCORE1 | <p>-</p> | IPMI agent |
vol.pvcore1<p>Update: 1h</p> |
MULTI_BIT_ERR | <p>-</p> | IPMI agent |
board.multi.bit.err<p>Update: 15m</p> |
P5V | <p>-</p> | IPMI agent |
vol.p5v<p>Update: 1h</p> |
IOH inlet | <p>-</p> | IPMI agent |
temp.ioh.inlet<p>Update: 15m</p> |
FAN2_INLET | <p>-</p> | IPMI agent |
fan.2.inlet<p>Update: 15m</p> |
Front dimm3 | <p>-</p> | IPMI agent |
temp.front.dimm3<p>Update: 15m</p> |
P1V1_IOH | <p>-</p> | IPMI agent |
vol.p1v1.ioh<p>Update: 1h</p> |
P12V | <p>-</p> | IPMI agent |
vol.p12v<p>Update: 1h</p> |
HH/LP outlet | <p>-</p> | IPMI agent |
temp.hhlp.outlet<p>Update: 15m</p> |
Rear dimm1 | <p>-</p> | IPMI agent |
temp.rear.dimm1<p>Update: 15m</p> |
Rear dimm3 | <p>-</p> | IPMI agent |
temp.rear.dimm3<p>Update: 15m</p> |
CPU1_CATERR | <p>-</p> | IPMI agent |
proc.cpu1.caterr<p>Update: 15m</p> |
PROC1 DIMM5 | <p>-</p> | IPMI agent |
temp.proc1.dimm5<p>Update: 15m</p> |
PROC1 DIMM1 | <p>-</p> | IPMI agent |
temp.proc1.dimm1<p>Update: 15m</p> |
PVTT-CPU1 | <p>-</p> | IPMI agent |
vol.pvtt.cpu1<p>Update: 1h</p> |
IOH_Temp | <p>-</p> | IPMI agent |
temp.ioh.temp<p>Update: 15m</p> |
IOH_THERMALERT_N | <p>-</p> | IPMI agent |
board.ioh.thermalert.n<p>Update: 15m</p> |
PROC2 DIMM1 | <p>-</p> | IPMI agent |
temp.proc2.dimm1<p>Update: 15m</p> |
CPU2 Sensor | <p>-</p> | IPMI agent |
temp.cpu2<p>Update: 15m</p> |
MLB inlet_3 | <p>-</p> | IPMI agent |
temp.mlb.inlet3<p>Update: 15m</p> |
P1V5_DDR3_CPU1 | <p>-</p> | IPMI agent |
vol.p1v5.ddr3.cpu1<p>Update: 1h</p> |
PROC2 DIMM5 | <p>-</p> | IPMI agent |
temp.proc2.dimm5<p>Update: 15m</p> |
FAN3_INLET | <p>-</p> | IPMI agent |
fan.3.inlet<p>Update: 15m</p> |
PS1 Status | <p>-</p> | IPMI agent |
pwr.state1<p>Update: 15m</p> |
FH/FL riser2 | <p>-</p> | IPMI agent |
temp.fhfl.riser2<p>Update: 15m</p> |
Rear dimm2 | <p>-</p> | IPMI agent |
temp.rear.dimm2<p>Update: 15m</p> |
CPU1 Sensor | <p>-</p> | IPMI agent |
temp.cpu1<p>Update: 15m</p> |
VRD_PWRGOOD_FAIL | <p>-</p> | IPMI agent |
board.vrd.pwrgood.fail<p>Update: 15m</p> |
IOH_NMI_DETECT | <p>-</p> | IPMI agent |
board.ioh.nmi.detect<p>Update: 15m</p> |
CPU1_PROCHOT | <p>-</p> | IPMI agent |
proc.cpu1.prochot<p>Update: 15m</p> |
IOH IERR2 | <p>-</p> | IPMI agent |
board.ioh.ierr2<p>Update: 15m</p> |
Front dimm2 | <p>-</p> | IPMI agent |
temp.front.dimm2<p>Update: 15m</p> |
PROC1 DIMM2 | <p>-</p> | IPMI agent |
temp.proc1.dimm2<p>Update: 15m</p> |
PROC1 DIMM6 | <p>-</p> | IPMI agent |
temp.proc1.dimm6<p>Update: 15m</p> |
MLB inlet_2 | <p>-</p> | IPMI agent |
temp.mlb.inlet2<p>Update: 15m</p> |
IOH outlet | <p>-</p> | IPMI agent |
temp.ioh.outlet<p>Update: 15m</p> |
CPU ThermalTrip | <p>-</p> | IPMI agent |
proc.thermaltrip<p>Update: 15m</p> |
PROC1 DIMM3 | <p>-</p> | IPMI agent |
temp.proc1.dimm3<p>Update: 15m</p> |
FAN1_INLET | <p>-</p> | IPMI agent |
fan.1.inlet<p>Update: 15m</p> |
P3V3 | <p>-</p> | IPMI agent |
vol.p3v3<p>Update: 1h</p> |
PS2 Status | <p>-</p> | IPMI agent |
pwr.state2<p>Update: 15m</p> |
Front dimm1 | <p>-</p> | IPMI agent |
temp.front.dimm1<p>Update: 15m</p> |
PROC2 DIMM2 | <p>-</p> | IPMI agent |
temp.proc2.dimm2<p>Update: 15m</p> |
There are no triggers in this template.