Zabbix monitoring template about ILO ProLiant DL380p Gen8. This template controls CPU, RAM banks, temperature and disks status. By Federico Coppola
It is a simple template to monitoring HP ILO ProLiant DL380p Gen8.It controls the status about fans, disks, RAM banks, CPUs and temperature sensors.
It is tested with the Zabbix version 4 alpha and works properly.
Federico
Federico Coppola
| Name | Description | Default | Type |
|---|---|---|---|
| {$SNMP_COMMUNITY} | <p>-</p> | public |
Text macro |
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Bank Ram Nineteen | <p>Bank Ram number nineteen</p> | SNMP agent |
status.ram.nineteen<p>Update: 30s</p> |
| Bank Ram Three | <p>Bank Ram number three</p> | SNMP agent |
status.ram.three<p>Update: 30s</p> |
| Disk One Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.one<p>Update: 30s</p> |
| Disk Eight Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.eight<p>Update: 30s</p> |
| Bank Ram Twentytwo | <p>Bank Ram number twentytwo</p> | SNMP agent |
status.ram.twentytwo<p>Update: 30s</p> |
| Bank Ram Eleven | <p>Bank Ram number eleven</p> | SNMP agent |
status.ram.eleven<p>Update: 30s</p> |
| Bank Ram Six | <p>Bank Ram number six</p> | SNMP agent |
status.ram.six<p>Update: 30s</p> |
| Bank Ram Seventeen | <p>Bank Ram number seventeen</p> | SNMP agent |
status.ram.seventeen<p>Update: 30s</p> |
| Fan Three Status | <p>Status Fan Three Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.three<p>Update: 30s</p> |
| Bank Ram Five | <p>Bank Ram number five</p> | SNMP agent |
status.ram.five<p>Update: 30s</p> |
| Disk Five Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.five<p>Update: 30s</p> |
| Fan One Status | <p>Status Fan One Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.one<p>Update: 30s</p> |
| Disk Seven Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.seven<p>Update: 30s</p> |
| Disk Four Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.four<p>Update: 30s</p> |
| Disk Six Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.six<p>Update: 30s</p> |
| Temp CPU One | <p>CPU 1</p> | SNMP agent |
temp.cpu.one<p>Update: 30s</p> |
| Fan Four Status | <p>Status Fan Four Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.four<p>Update: 30s</p> |
| Temp CPU Two | <p>Temperature of CPU Two</p> | SNMP agent |
temp.cpu.two<p>Update: 30s</p> |
| Bank Ram Ten | <p>Bank Ram number ten</p> | SNMP agent |
status.ram.ten<p>Update: 30s</p> |
| Bank Ram Eight | <p>Bank Ram number eight</p> | SNMP agent |
status.ram.eight<p>Update: 30s</p> |
| Bank Ram Sixteen | <p>Bank Ram number sixteen</p> | SNMP agent |
status.ram.sixteen<p>Update: 30s</p> |
| Fan Six Status | <p>Status Fan Six Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.six<p>Update: 30s</p> |
| Disk Three Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.three<p>Update: 30s</p> |
| Bank Ram Two | <p>Bank Ram number two</p> | SNMP agent |
status.ram.two<p>Update: 30s</p> |
| Bank Ram Four | <p>Bank Ram number four</p> | SNMP agent |
status.ram.four<p>Update: 30s</p> |
| Bank Ram Thirteen | <p>Bank Ram number thirteen</p> | SNMP agent |
status.ram.thirteen<p>Update: 30s</p> |
| Fan Five Status | <p>Status Fan Five Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.five<p>Update: 30s</p> |
| Fan Two Status | <p>Status Fan Two Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.two<p>Update: 30s</p> |
| Temp ILO Zone | <p>Temperature ILO Zone</p> | SNMP agent |
temp.ilo.zone<p>Update: 30s</p> |
| Bank Ram One | <p>Bank Ram number one</p> | SNMP agent |
status.ram.one<p>Update: 30s</p> |
| Bank Ram Twentyone | <p>Bank Ram number twentyone</p> | SNMP agent |
status.ram.twentyone<p>Update: 30s</p> |
| Bank Ram Twelve | <p>Bank Ram number twelve</p> | SNMP agent |
status.ram.twelve<p>Update: 30s</p> |
| Bank Ram Nine | <p>Bank Ram number nine</p> | SNMP agent |
status.ram.nine<p>Update: 30s</p> |
| Bank Ram Eighteen | <p>Bank Ram number eighteen</p> | SNMP agent |
status.ram.eighteen<p>Update: 30s</p> |
| CPU Two Status | <p>Status CPU Two If the status is different from 2 there is problem</p> | SNMP agent |
status.cpu.two<p>Update: 30s</p> |
| Disk Two Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.two<p>Update: 30s</p> |
| Bank Ram Twenty | <p>Bank Ram number twenty</p> | SNMP agent |
status.ram.twenty<p>Update: 30s</p> |
| CPU One Status | <p>Status CPU One If the status is different from 2 there is problem</p> | SNMP agent |
status.cpu.one<p>Update: 30s</p> |
| Temp Inlet | <p>interfaces.ifTable.ifEntry.ifInOctets.1</p> | SNMP agent |
temp.inlet.ambient<p>Update: 30s</p> |
There are no triggers in this template.
Zabbix monitoring template about ILO ProLiant DL380p Gen8. This template controls CPU, RAM banks, temperature and disks status. By Federico Coppola
It is a simple template to monitoring HP ILO ProLiant DL380p Gen8.It controls the status about fans, disks, RAM banks, CPUs and temperature sensors.
It is tested with the Zabbix version 4 alpha and works properly.
Federico
Federico Coppola
| Name | Description | Default | Type |
|---|---|---|---|
| {$SNMP_COMMUNITY} | <p>-</p> | public |
Text macro |
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Bank Ram Eight | <p>Bank Ram number eight</p> | SNMP agent |
status.ram.eight<p>Update: 30s</p> |
| Bank Ram Seventeen | <p>Bank Ram number seventeen</p> | SNMP agent |
status.ram.seventeen<p>Update: 30s</p> |
| Bank Ram Thirteen | <p>Bank Ram number thirteen</p> | SNMP agent |
status.ram.thirteen<p>Update: 30s</p> |
| Bank Ram Twentyone | <p>Bank Ram number twentyone</p> | SNMP agent |
status.ram.twentyone<p>Update: 30s</p> |
| Bank Ram Nine | <p>Bank Ram number nine</p> | SNMP agent |
status.ram.nine<p>Update: 30s</p> |
| Bank Ram Six | <p>Bank Ram number six</p> | SNMP agent |
status.ram.six<p>Update: 30s</p> |
| Temp ILO Zone | <p>Temperature ILO Zone</p> | SNMP agent |
temp.ilo.zone<p>Update: 30s</p> |
| Bank Ram Two | <p>Bank Ram number two</p> | SNMP agent |
status.ram.two<p>Update: 30s</p> |
| Disk Eight Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.eight<p>Update: 30s</p> |
| Disk Two Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.two<p>Update: 30s</p> |
| Fan Three Status | <p>Status Fan Three Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.three<p>Update: 30s</p> |
| Bank Ram Eighteen | <p>Bank Ram number eighteen</p> | SNMP agent |
status.ram.eighteen<p>Update: 30s</p> |
| Bank Ram Sixteen | <p>Bank Ram number sixteen</p> | SNMP agent |
status.ram.sixteen<p>Update: 30s</p> |
| Bank Ram Eleven | <p>Bank Ram number eleven</p> | SNMP agent |
status.ram.eleven<p>Update: 30s</p> |
| Bank Ram Twentytwo | <p>Bank Ram number twentytwo</p> | SNMP agent |
status.ram.twentytwo<p>Update: 30s</p> |
| Bank Ram Five | <p>Bank Ram number five</p> | SNMP agent |
status.ram.five<p>Update: 30s</p> |
| Bank Ram Nineteen | <p>Bank Ram number nineteen</p> | SNMP agent |
status.ram.nineteen<p>Update: 30s</p> |
| CPU Two Status | <p>Status CPU Two If the status is different from 2 there is problem</p> | SNMP agent |
status.cpu.two<p>Update: 30s</p> |
| Fan Four Status | <p>Status Fan Four Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.four<p>Update: 30s</p> |
| Fan Six Status | <p>Status Fan Six Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.six<p>Update: 30s</p> |
| Fan One Status | <p>Status Fan One Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.one<p>Update: 30s</p> |
| Fan Two Status | <p>Status Fan Two Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.two<p>Update: 30s</p> |
| Temp CPU One | <p>CPU 1</p> | SNMP agent |
temp.cpu.one<p>Update: 30s</p> |
| Temp Inlet | <p>interfaces.ifTable.ifEntry.ifInOctets.1</p> | SNMP agent |
temp.inlet.ambient<p>Update: 30s</p> |
| Disk Seven Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.seven<p>Update: 30s</p> |
| Bank Ram Four | <p>Bank Ram number four</p> | SNMP agent |
status.ram.four<p>Update: 30s</p> |
| Bank Ram Ten | <p>Bank Ram number ten</p> | SNMP agent |
status.ram.ten<p>Update: 30s</p> |
| Disk Five Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.five<p>Update: 30s</p> |
| Disk Six Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.six<p>Update: 30s</p> |
| Disk Three Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.three<p>Update: 30s</p> |
| Bank Ram Twelve | <p>Bank Ram number twelve</p> | SNMP agent |
status.ram.twelve<p>Update: 30s</p> |
| Disk One Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.one<p>Update: 30s</p> |
| Fan Five Status | <p>Status Fan Five Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.five<p>Update: 30s</p> |
| CPU One Status | <p>Status CPU One If the status is different from 2 there is problem</p> | SNMP agent |
status.cpu.one<p>Update: 30s</p> |
| Bank Ram One | <p>Bank Ram number one</p> | SNMP agent |
status.ram.one<p>Update: 30s</p> |
| Bank Ram Three | <p>Bank Ram number three</p> | SNMP agent |
status.ram.three<p>Update: 30s</p> |
| Disk Four Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.four<p>Update: 30s</p> |
| Bank Ram Twenty | <p>Bank Ram number twenty</p> | SNMP agent |
status.ram.twenty<p>Update: 30s</p> |
| Temp CPU Two | <p>Temperature of CPU Two</p> | SNMP agent |
temp.cpu.two<p>Update: 30s</p> |
There are no triggers in this template.
Zabbix monitoring template about ILO ProLiant DL380p Gen8. This template controls CPU, RAM banks, temperature and disks status. By Federico Coppola
It is a simple template to monitoring HP ILO ProLiant DL380p Gen8.It controls the status about fans, disks, RAM banks, CPUs and temperature sensors.
It is tested with the Zabbix version 4 alpha and works properly.
Federico
Federico Coppola
| Name | Description | Default | Type |
|---|---|---|---|
| {$SNMP_COMMUNITY} | <p>-</p> | public |
Text macro |
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Bank Ram Eight | <p>Bank Ram number eight</p> | SNMP agent |
status.ram.eight<p>Update: 30s</p> |
| Bank Ram Seventeen | <p>Bank Ram number seventeen</p> | SNMP agent |
status.ram.seventeen<p>Update: 30s</p> |
| Bank Ram Thirteen | <p>Bank Ram number thirteen</p> | SNMP agent |
status.ram.thirteen<p>Update: 30s</p> |
| Bank Ram Twentyone | <p>Bank Ram number twentyone</p> | SNMP agent |
status.ram.twentyone<p>Update: 30s</p> |
| Bank Ram Nine | <p>Bank Ram number nine</p> | SNMP agent |
status.ram.nine<p>Update: 30s</p> |
| Bank Ram Six | <p>Bank Ram number six</p> | SNMP agent |
status.ram.six<p>Update: 30s</p> |
| Temp ILO Zone | <p>Temperature ILO Zone</p> | SNMP agent |
temp.ilo.zone<p>Update: 30s</p> |
| Bank Ram Two | <p>Bank Ram number two</p> | SNMP agent |
status.ram.two<p>Update: 30s</p> |
| Disk Eight Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.eight<p>Update: 30s</p> |
| Disk Two Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.two<p>Update: 30s</p> |
| Fan Three Status | <p>Status Fan Three Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.three<p>Update: 30s</p> |
| Bank Ram Eighteen | <p>Bank Ram number eighteen</p> | SNMP agent |
status.ram.eighteen<p>Update: 30s</p> |
| Bank Ram Sixteen | <p>Bank Ram number sixteen</p> | SNMP agent |
status.ram.sixteen<p>Update: 30s</p> |
| Bank Ram Eleven | <p>Bank Ram number eleven</p> | SNMP agent |
status.ram.eleven<p>Update: 30s</p> |
| Bank Ram Twentytwo | <p>Bank Ram number twentytwo</p> | SNMP agent |
status.ram.twentytwo<p>Update: 30s</p> |
| Bank Ram Five | <p>Bank Ram number five</p> | SNMP agent |
status.ram.five<p>Update: 30s</p> |
| Bank Ram Nineteen | <p>Bank Ram number nineteen</p> | SNMP agent |
status.ram.nineteen<p>Update: 30s</p> |
| CPU Two Status | <p>Status CPU Two If the status is different from 2 there is problem</p> | SNMP agent |
status.cpu.two<p>Update: 30s</p> |
| Fan Four Status | <p>Status Fan Four Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.four<p>Update: 30s</p> |
| Fan Six Status | <p>Status Fan Six Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.six<p>Update: 30s</p> |
| Fan One Status | <p>Status Fan One Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.one<p>Update: 30s</p> |
| Fan Two Status | <p>Status Fan Two Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.two<p>Update: 30s</p> |
| Temp CPU One | <p>CPU 1</p> | SNMP agent |
temp.cpu.one<p>Update: 30s</p> |
| Temp Inlet | <p>interfaces.ifTable.ifEntry.ifInOctets.1</p> | SNMP agent |
temp.inlet.ambient<p>Update: 30s</p> |
| Disk Seven Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.seven<p>Update: 30s</p> |
| Bank Ram Four | <p>Bank Ram number four</p> | SNMP agent |
status.ram.four<p>Update: 30s</p> |
| Bank Ram Ten | <p>Bank Ram number ten</p> | SNMP agent |
status.ram.ten<p>Update: 30s</p> |
| Disk Five Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.five<p>Update: 30s</p> |
| Disk Six Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.six<p>Update: 30s</p> |
| Disk Three Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.three<p>Update: 30s</p> |
| Bank Ram Twelve | <p>Bank Ram number twelve</p> | SNMP agent |
status.ram.twelve<p>Update: 30s</p> |
| Disk One Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.one<p>Update: 30s</p> |
| Fan Five Status | <p>Status Fan Five Status = 2 is OK Status = 3 is degrade Status = 4 is faulty</p> | SNMP agent |
status.fan.five<p>Update: 30s</p> |
| CPU One Status | <p>Status CPU One If the status is different from 2 there is problem</p> | SNMP agent |
status.cpu.one<p>Update: 30s</p> |
| Bank Ram One | <p>Bank Ram number one</p> | SNMP agent |
status.ram.one<p>Update: 30s</p> |
| Bank Ram Three | <p>Bank Ram number three</p> | SNMP agent |
status.ram.three<p>Update: 30s</p> |
| Disk Four Status | <p>Status physical drive 1=Other 2=Ok 3=Failed 4=Predictive Failure</p> | SNMP agent |
status.disk.four<p>Update: 30s</p> |
| Bank Ram Twenty | <p>Bank Ram number twenty</p> | SNMP agent |
status.ram.twenty<p>Update: 30s</p> |
| Temp CPU Two | <p>Temperature of CPU Two</p> | SNMP agent |
temp.cpu.two<p>Update: 30s</p> |
There are no triggers in this template.