Teracom TCW122B-WD IP watchdog monitoring module TCW122B-WD is an IP watchdog monitoring module, based on TCW122 hardware. It has 2 digital and 2 analog inputs. It supports up to two temperature/humidity sensors on its 1-Wire interface. The IP watchdog controller has also two relays with normally open and normally closed contacts. TCW122B-WD is dedicated to IP watchdog monitoring as a stand-alone device.The controller supports also SNMP v1 as M2M protocol. It can also be used as a part of small to medium SCADA systems for environmental monitoring of server rooms. Template by Kari Karvonen <oh1kk @toimii.fi> Tested with firmware version: tcw122-wd_v3.03
Teracom TCW122B-WD IP watchdog monitoring module
TCW122B-WD is an IP watchdog monitoring module, based on TCW122 hardware. It has 2 digital and 2 analog inputs. It supports up to two temperature/humidity sensors on its 1-Wire interface. The IP watchdog controller has also two relays with normally open and normally closed contacts. TCW122B-WD is dedicated to IP watchdog monitoring as a stand-alone device.The controller supports also SNMP v1 as M2M protocol. It can also be used as a part of small to medium SCADA systems for environmental monitoring of server rooms.
TCW122B-WD features
TCW122B-WD Zabbix template
Triggers
Humidity 1 high alarm
Humidity 1 low alarm
Humidity 2 high alarm
Humidity 2 low alarm
Temperature 1 high alarm
Temperature 1 low alarm
Temperature 2 high alarm
Temperature 2 low alarm
Voltage 1 high alarm
Voltage 1 low alarm
Voltage 2 high alarm
Voltage 2 low alarm
Adjust trigger values from TCW122B-WD’s web user interface. To avoid false alarms when you have no onewire sensors, set upper limit to 201. Alteranatively disable triggers.
Graphs
Humidity sensor 1
Humidity sensor 2
Temperature sensor 1
Temperature sensor 2
Voltage 1
Voltage 2
Traps
To get human readable snmp traps, you need snmptt.
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD digital input1 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.1.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD digital input2 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.2.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD analog voltage1 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.7.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD analog voltage2 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.8.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD temperature1 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.9.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” IN
Kari Karvonen
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
subnetMask | <p>-</p> | SNMP agent |
TCW122B-WD.subnetMask<p>Update: 60m</p> |
voltage2Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2Hyst<p>Update: 5m</p> |
humidity2Max | <p>-</p> | SNMP agent |
TCW122B-WD.humidity2Max<p>Update: 5m</p> |
filterMACEnable1 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACEnable1<p>Update: 60m</p> |
relayPulseWidth | <p>-</p> | SNMP agent |
TCW122B-WD.relayPulseWidth<p>Update: 1h</p> |
filterMACAddress1 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACAddress1<p>Update: 60m</p> |
maxNumberOfTraps | <p>-</p> | SNMP agent |
TCW122B-WD.maxNumberOfTraps<p>Update: 60m</p> |
trapInterval | <p>-</p> | SNMP agent |
TCW122B-WD.trapInterval<p>Update: 60m</p> |
trapEnabled | <p>-</p> | SNMP agent |
TCW122B-WD.trapEnabled<p>Update: 60m</p> |
watchdog 1 outgoing ping interval | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1OutgoingPingInterval<p>Update: 60m</p> |
snmpConfiguration | <p>-</p> | SNMP agent |
TCW122B-WD.snmpConfiguration<p>Update: 60m</p> |
analog input1 name | <p>-</p> | SNMP agent |
TCW122B-WD.input1<p>Update: 60m</p> |
watchdog 2 ping timeout for restart | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2PingTimeOutForRestart<p>Update: 60m</p> |
humi2 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.humi2<p>Update: 1m</p> |
watchdog 2 mode | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2Mode<p>Update: 60m</p> |
watchdog 2 ping IP-address | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2PingIPAddress<p>Update: 60m</p> |
analog input2 name | <p>-</p> | SNMP agent |
TCW122B-WD.input2<p>Update: 60m</p> |
watchdog 1 ping timeout for restart | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1PingTimeOutForRestart<p>Update: 60m</p> |
trapReceiverIPAddress | <p>-</p> | SNMP agent |
TCW122B-WD.trapReceiverIPAddress<p>Update: 60m</p> |
Received SNMP traps | <p>-</p> | SNMP trap |
snmptrap.fallback<p>Update: 0</p> |
watchdog 1 ping IP-address | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1PingIPAddress<p>Update: 60m</p> |
voltage2Max | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2Max<p>Update: 5m</p> |
humi1 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.humi1<p>Update: 1m</p> |
watchdog 1 mode | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1Mode<p>Update: 60m</p> |
digitalInput1State | <p>-</p> | SNMP agent |
TCW122B-WD.digitalInput1State<p>Update: 1m</p> |
relay1State | <p>-</p> | SNMP agent |
TCW122B-WD.relay1State<p>Update: 1m</p> |
temperature2Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.temperature2Hyst<p>Update: 5m</p> |
temp2 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.temp2<p>Update: 1m</p> |
filterMACEnable3 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACEnable3<p>Update: 60m</p> |
trapCommunity | <p>-</p> | SNMP agent |
TCW122B-WD.trapCommunity<p>Update: 60m</p> |
relay2Pulse | <p>-</p> | SNMP agent |
TCW122B-WD.relay2Pulse<p>Update: 1m</p> |
filterMACEnable2 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACEnable2<p>Update: 60m</p> |
relay2State | <p>-</p> | SNMP agent |
TCW122B-WD.relay2State<p>Update: 1m</p> |
version | <p>-</p> | SNMP agent |
TCW122B-WD.version<p>Update: 60m</p> |
deviceIPAddress | <p>-</p> | SNMP agent |
TCW122B-WD.deviceIPAddress<p>Update: 60m</p> |
temperature1Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.temperature1Hyst<p>Update: 5m</p> |
digitalInput2State | <p>-</p> | SNMP agent |
TCW122B-WD.digitalInput2State<p>Update: 1m</p> |
Temperature units | <p>-</p> | SNMP agent |
TCW122B-WD.temperatureUnits<p>Update: 1h</p> |
humidity1Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.humidity1Hyst<p>Update: 5m</p> |
voltage2Min | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2Min<p>Update: 5m</p> |
relay2ControlledBy | <p>-</p> | SNMP agent |
TCW122B-WD.relay2ControlledBy<p>Update: 1h</p> |
date | <p>Release date</p> | SNMP agent |
TCW122B-WD.date<p>Update: 60m</p> |
humidity2Min | <p>-</p> | SNMP agent |
TCW122B-WD.humidity2Min<p>Update: 5m</p> |
filterMACAddress2 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACAddress2<p>Update: 60m</p> |
voltage1Min | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1Min<p>Update: 5m</p> |
gateway | <p>-</p> | SNMP agent |
TCW122B-WD.gateway<p>Update: 60m</p> |
watchdog 2 number of restarts | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2NumberOfRestarts<p>Update: 60m</p> |
vlanStatus | <p>disabled(0), enabled(1)</p> | SNMP agent |
TCW122B-WD.vlanStatus<p>Update: 60m</p> |
Digital input 2 name | <p>-</p> | SNMP agent |
TCW122B-WD.relay7<p>Update: 60m</p> |
voltage2 | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2<p>Update: 1m</p> |
dhcpConfig | <p>off(0), on(1)</p> | SNMP agent |
TCW122B-WD.dhcpConfig<p>Update: 60m</p> |
humidity1Min | <p>-</p> | SNMP agent |
TCW122B-WD.humidity1Min<p>Update: 5m</p> |
hostName | <p>-</p> | SNMP agent |
TCW122B-WD.hostName<p>Update: 60m</p> |
humidity2Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.humidity2Hyst<p>Update: 5m</p> |
voltage1Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1Hyst<p>Update: 5m</p> |
Digital input 1 name | <p>-</p> | SNMP agent |
TCW122B-WD.relay6<p>Update: 60m</p> |
humidity1Max | <p>-</p> | SNMP agent |
TCW122B-WD.humidity1Max<p>Update: 5m</p> |
temperature2Min | <p>-</p> | SNMP agent |
TCW122B-WD.temperature2Min<p>Update: 5m</p> |
watchdog 2 outgoing ping interval | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2OutgoingPingInterval<p>Update: 60m</p> |
watchdog 1 number of restarts | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1NumberOfRestarts<p>Update: 60m</p> |
relay1ControlledBy | <p>-</p> | SNMP agent |
TCW122B-WD.relay1ControlledBy<p>Update: 1h</p> |
temperature1Max | <p>-</p> | SNMP agent |
TCW122B-WD.temperature1Max<p>Update: 5m</p> |
filterMACAddress3 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACAddress3<p>Update: 60m</p> |
vlanId | <p>-</p> | SNMP agent |
TCW122B-WD.vlanId<p>Update: 60m</p> |
name | <p>-</p> | SNMP agent |
TCW122B-WD.name<p>Update: 60m</p> |
temp1 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.temp1<p>Update: 1m</p> |
voltage1Max | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1Max<p>Update: 5m</p> |
temperature2Max | <p>-</p> | SNMP agent |
TCW122B-WD.temperature2Max<p>Update: 5m</p> |
deviceMACAddress | <p>-</p> | SNMP agent |
TCW122B-WD.deviceMACAddress<p>Update: 60m</p> |
relay1Pulse | <p>-</p> | SNMP agent |
TCW122B-WD.relay1Pulse<p>Update: 1m</p> |
voltage1 | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1<p>Update: 1m</p> |
temperature1Min | <p>-</p> | SNMP agent |
TCW122B-WD.temperature1Min<p>Update: 5m</p> |
There are no triggers in this template.
Teracom TCW122B-WD IP watchdog monitoring module TCW122B-WD is an IP watchdog monitoring module, based on TCW122 hardware. It has 2 digital and 2 analog inputs. It supports up to two temperature/humidity sensors on its 1-Wire interface. The IP watchdog controller has also two relays with normally open and normally closed contacts. TCW122B-WD is dedicated to IP watchdog monitoring as a stand-alone device.The controller supports also SNMP v1 as M2M protocol. It can also be used as a part of small to medium SCADA systems for environmental monitoring of server rooms. Template by Kari Karvonen <oh1kk @toimii.fi> Tested with firmware version: tcw122-wd_v3.03
Teracom TCW122B-WD IP watchdog monitoring module
TCW122B-WD is an IP watchdog monitoring module, based on TCW122 hardware. It has 2 digital and 2 analog inputs. It supports up to two temperature/humidity sensors on its 1-Wire interface. The IP watchdog controller has also two relays with normally open and normally closed contacts. TCW122B-WD is dedicated to IP watchdog monitoring as a stand-alone device.The controller supports also SNMP v1 as M2M protocol. It can also be used as a part of small to medium SCADA systems for environmental monitoring of server rooms.
TCW122B-WD features
TCW122B-WD Zabbix template
Triggers
Humidity 1 high alarm
Humidity 1 low alarm
Humidity 2 high alarm
Humidity 2 low alarm
Temperature 1 high alarm
Temperature 1 low alarm
Temperature 2 high alarm
Temperature 2 low alarm
Voltage 1 high alarm
Voltage 1 low alarm
Voltage 2 high alarm
Voltage 2 low alarm
Adjust trigger values from TCW122B-WD’s web user interface. To avoid false alarms when you have no onewire sensors, set upper limit to 201. Alteranatively disable triggers.
Graphs
Humidity sensor 1
Humidity sensor 2
Temperature sensor 1
Temperature sensor 2
Voltage 1
Voltage 2
Traps
To get human readable snmp traps, you need snmptt.
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD digital input1 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.1.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD digital input2 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.2.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD analog voltage1 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.7.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD analog voltage2 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.8.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD temperature1 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.9.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” IN
Kari Karvonen
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
voltage1Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1Hyst<p>Update: 5m</p> |
watchdog 1 outgoing ping interval | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1OutgoingPingInterval<p>Update: 60m</p> |
Received SNMP traps | <p>-</p> | SNMP trap |
snmptrap.fallback<p>Update: 0</p> |
trapReceiverIPAddress | <p>-</p> | SNMP agent |
TCW122B-WD.trapReceiverIPAddress<p>Update: 60m</p> |
date | <p>Release date</p> | SNMP agent |
TCW122B-WD.date<p>Update: 60m</p> |
humi2 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.humi2<p>Update: 1m</p> |
relayPulseWidth | <p>-</p> | SNMP agent |
TCW122B-WD.relayPulseWidth<p>Update: 1h</p> |
temperature1Max | <p>-</p> | SNMP agent |
TCW122B-WD.temperature1Max<p>Update: 5m</p> |
vlanId | <p>-</p> | SNMP agent |
TCW122B-WD.vlanId<p>Update: 60m</p> |
Digital input 2 name | <p>-</p> | SNMP agent |
TCW122B-WD.relay7<p>Update: 60m</p> |
snmpConfiguration | <p>-</p> | SNMP agent |
TCW122B-WD.snmpConfiguration<p>Update: 60m</p> |
humidity1Min | <p>-</p> | SNMP agent |
TCW122B-WD.humidity1Min<p>Update: 5m</p> |
analog input1 name | <p>-</p> | SNMP agent |
TCW122B-WD.input1<p>Update: 60m</p> |
filterMACAddress2 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACAddress2<p>Update: 60m</p> |
watchdog 1 mode | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1Mode<p>Update: 60m</p> |
watchdog 1 ping timeout for restart | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1PingTimeOutForRestart<p>Update: 60m</p> |
temperature2Min | <p>-</p> | SNMP agent |
TCW122B-WD.temperature2Min<p>Update: 5m</p> |
maxNumberOfTraps | <p>-</p> | SNMP agent |
TCW122B-WD.maxNumberOfTraps<p>Update: 60m</p> |
version | <p>-</p> | SNMP agent |
TCW122B-WD.version<p>Update: 60m</p> |
humi1 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.humi1<p>Update: 1m</p> |
humidity1Max | <p>-</p> | SNMP agent |
TCW122B-WD.humidity1Max<p>Update: 5m</p> |
filterMACAddress1 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACAddress1<p>Update: 60m</p> |
digitalInput1State | <p>-</p> | SNMP agent |
TCW122B-WD.digitalInput1State<p>Update: 1m</p> |
gateway | <p>-</p> | SNMP agent |
TCW122B-WD.gateway<p>Update: 60m</p> |
watchdog 2 outgoing ping interval | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2OutgoingPingInterval<p>Update: 60m</p> |
Digital input 1 name | <p>-</p> | SNMP agent |
TCW122B-WD.relay6<p>Update: 60m</p> |
watchdog 1 number of restarts | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1NumberOfRestarts<p>Update: 60m</p> |
humidity1Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.humidity1Hyst<p>Update: 5m</p> |
subnetMask | <p>-</p> | SNMP agent |
TCW122B-WD.subnetMask<p>Update: 60m</p> |
analog input2 name | <p>-</p> | SNMP agent |
TCW122B-WD.input2<p>Update: 60m</p> |
relay1ControlledBy | <p>-</p> | SNMP agent |
TCW122B-WD.relay1ControlledBy<p>Update: 1h</p> |
humidity2Max | <p>-</p> | SNMP agent |
TCW122B-WD.humidity2Max<p>Update: 5m</p> |
filterMACAddress3 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACAddress3<p>Update: 60m</p> |
humidity2Min | <p>-</p> | SNMP agent |
TCW122B-WD.humidity2Min<p>Update: 5m</p> |
filterMACEnable2 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACEnable2<p>Update: 60m</p> |
voltage1Max | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1Max<p>Update: 5m</p> |
relay2State | <p>-</p> | SNMP agent |
TCW122B-WD.relay2State<p>Update: 1m</p> |
voltage2Max | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2Max<p>Update: 5m</p> |
Temperature units | <p>-</p> | SNMP agent |
TCW122B-WD.temperatureUnits<p>Update: 1h</p> |
filterMACEnable1 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACEnable1<p>Update: 60m</p> |
relay1Pulse | <p>-</p> | SNMP agent |
TCW122B-WD.relay1Pulse<p>Update: 1m</p> |
relay2Pulse | <p>-</p> | SNMP agent |
TCW122B-WD.relay2Pulse<p>Update: 1m</p> |
voltage2 | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2<p>Update: 1m</p> |
temperature2Max | <p>-</p> | SNMP agent |
TCW122B-WD.temperature2Max<p>Update: 5m</p> |
watchdog 2 mode | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2Mode<p>Update: 60m</p> |
deviceMACAddress | <p>-</p> | SNMP agent |
TCW122B-WD.deviceMACAddress<p>Update: 60m</p> |
watchdog 2 ping IP-address | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2PingIPAddress<p>Update: 60m</p> |
vlanStatus | <p>disabled(0), enabled(1)</p> | SNMP agent |
TCW122B-WD.vlanStatus<p>Update: 60m</p> |
voltage1 | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1<p>Update: 1m</p> |
temperature1Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.temperature1Hyst<p>Update: 5m</p> |
trapInterval | <p>-</p> | SNMP agent |
TCW122B-WD.trapInterval<p>Update: 60m</p> |
trapCommunity | <p>-</p> | SNMP agent |
TCW122B-WD.trapCommunity<p>Update: 60m</p> |
relay2ControlledBy | <p>-</p> | SNMP agent |
TCW122B-WD.relay2ControlledBy<p>Update: 1h</p> |
filterMACEnable3 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACEnable3<p>Update: 60m</p> |
watchdog 1 ping IP-address | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1PingIPAddress<p>Update: 60m</p> |
voltage2Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2Hyst<p>Update: 5m</p> |
relay1State | <p>-</p> | SNMP agent |
TCW122B-WD.relay1State<p>Update: 1m</p> |
trapEnabled | <p>-</p> | SNMP agent |
TCW122B-WD.trapEnabled<p>Update: 60m</p> |
deviceIPAddress | <p>-</p> | SNMP agent |
TCW122B-WD.deviceIPAddress<p>Update: 60m</p> |
temperature1Min | <p>-</p> | SNMP agent |
TCW122B-WD.temperature1Min<p>Update: 5m</p> |
voltage1Min | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1Min<p>Update: 5m</p> |
name | <p>-</p> | SNMP agent |
TCW122B-WD.name<p>Update: 60m</p> |
voltage2Min | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2Min<p>Update: 5m</p> |
temp1 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.temp1<p>Update: 1m</p> |
temperature2Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.temperature2Hyst<p>Update: 5m</p> |
watchdog 2 ping timeout for restart | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2PingTimeOutForRestart<p>Update: 60m</p> |
humidity2Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.humidity2Hyst<p>Update: 5m</p> |
digitalInput2State | <p>-</p> | SNMP agent |
TCW122B-WD.digitalInput2State<p>Update: 1m</p> |
dhcpConfig | <p>off(0), on(1)</p> | SNMP agent |
TCW122B-WD.dhcpConfig<p>Update: 60m</p> |
temp2 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.temp2<p>Update: 1m</p> |
hostName | <p>-</p> | SNMP agent |
TCW122B-WD.hostName<p>Update: 60m</p> |
watchdog 2 number of restarts | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2NumberOfRestarts<p>Update: 60m</p> |
There are no triggers in this template.
Teracom TCW122B-WD IP watchdog monitoring module TCW122B-WD is an IP watchdog monitoring module, based on TCW122 hardware. It has 2 digital and 2 analog inputs. It supports up to two temperature/humidity sensors on its 1-Wire interface. The IP watchdog controller has also two relays with normally open and normally closed contacts. TCW122B-WD is dedicated to IP watchdog monitoring as a stand-alone device.The controller supports also SNMP v1 as M2M protocol. It can also be used as a part of small to medium SCADA systems for environmental monitoring of server rooms. Template by Kari Karvonen <oh1kk @toimii.fi> Tested with firmware version: tcw122-wd_v3.03
Teracom TCW122B-WD IP watchdog monitoring module
TCW122B-WD is an IP watchdog monitoring module, based on TCW122 hardware. It has 2 digital and 2 analog inputs. It supports up to two temperature/humidity sensors on its 1-Wire interface. The IP watchdog controller has also two relays with normally open and normally closed contacts. TCW122B-WD is dedicated to IP watchdog monitoring as a stand-alone device.The controller supports also SNMP v1 as M2M protocol. It can also be used as a part of small to medium SCADA systems for environmental monitoring of server rooms.
TCW122B-WD features
TCW122B-WD Zabbix template
Triggers
Humidity 1 high alarm
Humidity 1 low alarm
Humidity 2 high alarm
Humidity 2 low alarm
Temperature 1 high alarm
Temperature 1 low alarm
Temperature 2 high alarm
Temperature 2 low alarm
Voltage 1 high alarm
Voltage 1 low alarm
Voltage 2 high alarm
Voltage 2 low alarm
Adjust trigger values from TCW122B-WD’s web user interface. To avoid false alarms when you have no onewire sensors, set upper limit to 201. Alteranatively disable triggers.
Graphs
Humidity sensor 1
Humidity sensor 2
Temperature sensor 1
Temperature sensor 2
Voltage 1
Voltage 2
Traps
To get human readable snmp traps, you need snmptt.
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD digital input1 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.1.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD digital input2 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.2.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD analog voltage1 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.7.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD analog voltage2 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.8.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” INFORMATIONAL
FORMAT ZBXTRAP $aA SD TCW122B-WD temperature1 value $1
MATCH $-*: (.iso.3.6.1.4.1.38783.3.9.0)
EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 “Status Events” IN
Kari Karvonen
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
voltage1Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1Hyst<p>Update: 5m</p> |
watchdog 1 outgoing ping interval | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1OutgoingPingInterval<p>Update: 60m</p> |
Received SNMP traps | <p>-</p> | SNMP trap |
snmptrap.fallback<p>Update: 0</p> |
trapReceiverIPAddress | <p>-</p> | SNMP agent |
TCW122B-WD.trapReceiverIPAddress<p>Update: 60m</p> |
date | <p>Release date</p> | SNMP agent |
TCW122B-WD.date<p>Update: 60m</p> |
humi2 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.humi2<p>Update: 1m</p> |
relayPulseWidth | <p>-</p> | SNMP agent |
TCW122B-WD.relayPulseWidth<p>Update: 1h</p> |
temperature1Max | <p>-</p> | SNMP agent |
TCW122B-WD.temperature1Max<p>Update: 5m</p> |
vlanId | <p>-</p> | SNMP agent |
TCW122B-WD.vlanId<p>Update: 60m</p> |
Digital input 2 name | <p>-</p> | SNMP agent |
TCW122B-WD.relay7<p>Update: 60m</p> |
snmpConfiguration | <p>-</p> | SNMP agent |
TCW122B-WD.snmpConfiguration<p>Update: 60m</p> |
humidity1Min | <p>-</p> | SNMP agent |
TCW122B-WD.humidity1Min<p>Update: 5m</p> |
analog input1 name | <p>-</p> | SNMP agent |
TCW122B-WD.input1<p>Update: 60m</p> |
filterMACAddress2 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACAddress2<p>Update: 60m</p> |
watchdog 1 mode | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1Mode<p>Update: 60m</p> |
watchdog 1 ping timeout for restart | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1PingTimeOutForRestart<p>Update: 60m</p> |
temperature2Min | <p>-</p> | SNMP agent |
TCW122B-WD.temperature2Min<p>Update: 5m</p> |
maxNumberOfTraps | <p>-</p> | SNMP agent |
TCW122B-WD.maxNumberOfTraps<p>Update: 60m</p> |
version | <p>-</p> | SNMP agent |
TCW122B-WD.version<p>Update: 60m</p> |
humi1 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.humi1<p>Update: 1m</p> |
humidity1Max | <p>-</p> | SNMP agent |
TCW122B-WD.humidity1Max<p>Update: 5m</p> |
filterMACAddress1 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACAddress1<p>Update: 60m</p> |
digitalInput1State | <p>-</p> | SNMP agent |
TCW122B-WD.digitalInput1State<p>Update: 1m</p> |
gateway | <p>-</p> | SNMP agent |
TCW122B-WD.gateway<p>Update: 60m</p> |
watchdog 2 outgoing ping interval | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2OutgoingPingInterval<p>Update: 60m</p> |
Digital input 1 name | <p>-</p> | SNMP agent |
TCW122B-WD.relay6<p>Update: 60m</p> |
watchdog 1 number of restarts | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1NumberOfRestarts<p>Update: 60m</p> |
humidity1Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.humidity1Hyst<p>Update: 5m</p> |
subnetMask | <p>-</p> | SNMP agent |
TCW122B-WD.subnetMask<p>Update: 60m</p> |
analog input2 name | <p>-</p> | SNMP agent |
TCW122B-WD.input2<p>Update: 60m</p> |
relay1ControlledBy | <p>-</p> | SNMP agent |
TCW122B-WD.relay1ControlledBy<p>Update: 1h</p> |
humidity2Max | <p>-</p> | SNMP agent |
TCW122B-WD.humidity2Max<p>Update: 5m</p> |
filterMACAddress3 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACAddress3<p>Update: 60m</p> |
humidity2Min | <p>-</p> | SNMP agent |
TCW122B-WD.humidity2Min<p>Update: 5m</p> |
filterMACEnable2 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACEnable2<p>Update: 60m</p> |
voltage1Max | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1Max<p>Update: 5m</p> |
relay2State | <p>-</p> | SNMP agent |
TCW122B-WD.relay2State<p>Update: 1m</p> |
voltage2Max | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2Max<p>Update: 5m</p> |
Temperature units | <p>-</p> | SNMP agent |
TCW122B-WD.temperatureUnits<p>Update: 1h</p> |
filterMACEnable1 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACEnable1<p>Update: 60m</p> |
relay1Pulse | <p>-</p> | SNMP agent |
TCW122B-WD.relay1Pulse<p>Update: 1m</p> |
relay2Pulse | <p>-</p> | SNMP agent |
TCW122B-WD.relay2Pulse<p>Update: 1m</p> |
voltage2 | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2<p>Update: 1m</p> |
temperature2Max | <p>-</p> | SNMP agent |
TCW122B-WD.temperature2Max<p>Update: 5m</p> |
watchdog 2 mode | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2Mode<p>Update: 60m</p> |
deviceMACAddress | <p>-</p> | SNMP agent |
TCW122B-WD.deviceMACAddress<p>Update: 60m</p> |
watchdog 2 ping IP-address | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2PingIPAddress<p>Update: 60m</p> |
vlanStatus | <p>disabled(0), enabled(1)</p> | SNMP agent |
TCW122B-WD.vlanStatus<p>Update: 60m</p> |
voltage1 | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1<p>Update: 1m</p> |
temperature1Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.temperature1Hyst<p>Update: 5m</p> |
trapInterval | <p>-</p> | SNMP agent |
TCW122B-WD.trapInterval<p>Update: 60m</p> |
trapCommunity | <p>-</p> | SNMP agent |
TCW122B-WD.trapCommunity<p>Update: 60m</p> |
relay2ControlledBy | <p>-</p> | SNMP agent |
TCW122B-WD.relay2ControlledBy<p>Update: 1h</p> |
filterMACEnable3 | <p>-</p> | SNMP agent |
TCW122B-WD.filterMACEnable3<p>Update: 60m</p> |
watchdog 1 ping IP-address | <p>-</p> | SNMP agent |
TCW122B-WD.wdg1PingIPAddress<p>Update: 60m</p> |
voltage2Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2Hyst<p>Update: 5m</p> |
relay1State | <p>-</p> | SNMP agent |
TCW122B-WD.relay1State<p>Update: 1m</p> |
trapEnabled | <p>-</p> | SNMP agent |
TCW122B-WD.trapEnabled<p>Update: 60m</p> |
deviceIPAddress | <p>-</p> | SNMP agent |
TCW122B-WD.deviceIPAddress<p>Update: 60m</p> |
temperature1Min | <p>-</p> | SNMP agent |
TCW122B-WD.temperature1Min<p>Update: 5m</p> |
voltage1Min | <p>-</p> | SNMP agent |
TCW122B-WD.voltage1Min<p>Update: 5m</p> |
name | <p>-</p> | SNMP agent |
TCW122B-WD.name<p>Update: 60m</p> |
voltage2Min | <p>-</p> | SNMP agent |
TCW122B-WD.voltage2Min<p>Update: 5m</p> |
temp1 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.temp1<p>Update: 1m</p> |
temperature2Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.temperature2Hyst<p>Update: 5m</p> |
watchdog 2 ping timeout for restart | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2PingTimeOutForRestart<p>Update: 60m</p> |
humidity2Hyst | <p>-</p> | SNMP agent |
TCW122B-WD.humidity2Hyst<p>Update: 5m</p> |
digitalInput2State | <p>-</p> | SNMP agent |
TCW122B-WD.digitalInput2State<p>Update: 1m</p> |
dhcpConfig | <p>off(0), on(1)</p> | SNMP agent |
TCW122B-WD.dhcpConfig<p>Update: 60m</p> |
temp2 | <p>Output is 200 if sensor is not connected</p> | SNMP agent |
TCW122B-WD.temp2<p>Update: 1m</p> |
hostName | <p>-</p> | SNMP agent |
TCW122B-WD.hostName<p>Update: 60m</p> |
watchdog 2 number of restarts | <p>-</p> | SNMP agent |
TCW122B-WD.wdg2NumberOfRestarts<p>Update: 60m</p> |
There are no triggers in this template.