Good day!
This is my first attempt at creating a public template. As far as I’m aware, it should be operatable on multiple Dell laser printers. The model this was created on was the ‘Dell 3115CN’. Confirmed models that are supported:
I hope it’ll be of use to some of you. It’s been a fun project.
Thomas Roefs
There are no macros links in this template.
| Name |
|---|
| Template SNMP Generic |
| Template SNMP Interfaces |
| Template SNMP Device |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Cover | <p>-</p> | SNMP agent |
prtCoverDescription<p>Update: 3600</p> |
| Input | <p>-</p> | SNMP agent |
prtInputDescription<p>Update: 3600</p> |
| Media Path | <p>-</p> | SNMP agent |
prtMediaPathDescription<p>Update: 3600</p> |
| Supplies | <p>-</p> | SNMP agent |
prtMarkerSuppliesDescription<p>Update: 3600</p> |
| Output | <p>-</p> | SNMP agent |
prtOutputDescription<p>Update: 3600</p> |
| Network interfaces | <p>You may also consider using IF-MIB::ifType or IF-MIB::ifAlias for discovery depending on your filtering needs. {$SNMP_COMMUNITY} is a global macro.</p> | SNMP agent |
ifDescr<p>Update: 3600</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Device Type | <p>-</p> | SNMP agent |
hrDeviceDescr<p>Update: 43200</p> |
| Printer power on counter | <p>-</p> | SNMP agent |
prtMarkerPowerOnCount<p>Update: 60</p> |
| Printer lifetime counter | <p>-</p> | SNMP agent |
prtMarkerLifeCount<p>Update: 60</p> |
| Printer status | <p>-</p> | SNMP agent |
hrPrinterStatus<p>Update: 60</p> |
| Device console display | <p>-</p> | SNMP agent |
prtConsoleDisplayBufferText<p>Update: 60</p> |
| Printer error state | <p>-</p> | SNMP agent |
hrPrinterDetectedErrorState<p>Update: 60</p> |
| Device serial number | <p>-</p> | SNMP agent |
prtGeneralSerialNumber<p>Update: 43200</p> |
| Device MAC address | <p>-</p> | SNMP agent |
ifPhysAddress<p>Update: 3600</p> |
| Cover $1 | <p>-</p> | SNMP agent |
prtCoverDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Cover Status of $1 | <p>-</p> | SNMP agent |
prtCoverStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input Capacity $1 | <p>-</p> | Calculated |
prtInputCapacity[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input current level $1 | <p>-</p> | SNMP agent |
prtInputCurrentLevel[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input $1 | <p>-</p> | SNMP agent |
prtInputDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input max capacity $1 | <p>-</p> | SNMP agent |
prtInputMaxCapacity[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input Media Name $1 | <p>-</p> | SNMP agent |
prtInputMediaName[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input Model $1 | <p>-</p> | SNMP agent |
prtInputModel[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input SerialNumber $1 | <p>-</p> | SNMP agent |
prtInputSerialNumber[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input status $1 | <p>-</p> | SNMP agent |
prtInputStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input Type $1 | <p>-</p> | SNMP agent |
prtInputType[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Media Path Description of supplies $1 | <p>-</p> | SNMP agent |
prtMediaPathDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Media Path Status of supplies $1 | <p>-</p> | SNMP agent |
prtMediaPathStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Media Path Type of supplies $1 | <p>-</p> | SNMP agent |
prtMediaPathType[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Color Value of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerColorantValue[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Capacity of supplies $1 | <p>-</p> | Calculated |
prtMarkerSuppliesCapacity[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Description of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerSuppliesDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Level of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerSuppliesLevel[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| max Capacity of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerSuppliesMaxCapacity[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Output $1 | <p>-</p> | SNMP agent |
prtOutputDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Output max Capacity $1 | <p>-</p> | SNMP agent |
prtOutputMaxCapacity[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Output remaining Capacity $1 | <p>-</p> | SNMP agent |
prtOutputRemainingCapacity[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Output Status $1 | <p>-</p> | SNMP agent |
prtOutputStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Admin status of interface $1 | <p>The desired state of the interface.</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Alias of interface $1 | <p>-</p> | SNMP agent |
ifAlias[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Description of interface $1 | <p>A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.</p> | SNMP agent |
ifDescr[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Inbound errors on interface $1 | <p>For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol.</p> | SNMP agent |
ifInErrors[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Incoming traffic on interface $1 | <p>The number of octets in valid MAC frames received on this interface, including the MAC header and FCS.</p> | SNMP agent |
ifInOctets[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Operational status of interface $1 | <p>The current operational state of the interface.</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Outbound errors on interface $1 | <p>For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.</p> | SNMP agent |
ifOutErrors[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Outgoing traffic on interface $1 | <p>The number of octets transmitted in MAC frames on this interface, including the MAC header and FCS.</p> | SNMP agent |
ifOutOctets[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} | <p>-</p> | <p>Expression: {SNMP Printer:ifOperStatus[{#SNMPVALUE}].diff(0)}=1</p><p>Recovery expression: </p> | information |
| Cover {#SNMPVALUE} on printer {HOST.NAME} is not closed | <p>-</p> | <p>Expression: {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>4 and {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>6</p><p>Recovery expression: </p> | information |
| Input {#SNMPVALUE} on printer {HOST.NAME} has changed | <p>-</p> | <p>Expression: {SNMP Printer:prtInputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| {#SNMPVALUE} is low on printer {HOST.NAME} | <p>-</p> | <p>Expression: {SNMP Printer:prtMarkerSuppliesCapacity[{#SNMPVALUE}].last()}<10</p><p>Recovery expression: </p> | information |
| Output {#SNMPVALUE} on printer {HOST.NAME} has changed | <p>-</p> | <p>Expression: {SNMP Printer:prtOutputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| Cover {#SNMPVALUE} on printer {HOST.NAME} is not closed (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>4 and {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>6</p><p>Recovery expression: </p> | information |
| Input {#SNMPVALUE} on printer {HOST.NAME} has changed (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtInputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| {#SNMPVALUE} is low on printer {HOST.NAME} (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtMarkerSuppliesCapacity[{#SNMPVALUE}].last()}<10</p><p>Recovery expression: </p> | information |
| Output {#SNMPVALUE} on printer {HOST.NAME} has changed (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtOutputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:ifOperStatus[{#SNMPVALUE}].diff(0)}=1</p><p>Recovery expression: </p> | information |
Good day!
This is my first attempt at creating a public template. As far as I’m aware, it should be operatable on multiple Dell laser printers. The model this was created on was the ‘Dell 3115CN’. Confirmed models that are supported:
I hope it’ll be of use to some of you. It’s been a fun project.
Thomas Roefs
There are no macros links in this template.
| Name |
|---|
| Template SNMP Generic |
| Template SNMP Interfaces |
| Template SNMP Device |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Cover | <p>-</p> | SNMP agent |
prtCoverDescription<p>Update: 3600</p> |
| Input | <p>-</p> | SNMP agent |
prtInputDescription<p>Update: 3600</p> |
| Media Path | <p>-</p> | SNMP agent |
prtMediaPathDescription<p>Update: 3600</p> |
| Supplies | <p>-</p> | SNMP agent |
prtMarkerSuppliesDescription<p>Update: 3600</p> |
| Output | <p>-</p> | SNMP agent |
prtOutputDescription<p>Update: 3600</p> |
| Network interfaces | <p>You may also consider using IF-MIB::ifType or IF-MIB::ifAlias for discovery depending on your filtering needs. {$SNMP_COMMUNITY} is a global macro.</p> | SNMP agent |
ifDescr<p>Update: 3600</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Device Type | <p>-</p> | SNMP agent |
hrDeviceDescr<p>Update: 43200</p> |
| Printer power on counter | <p>-</p> | SNMP agent |
prtMarkerPowerOnCount<p>Update: 60</p> |
| Printer lifetime counter | <p>-</p> | SNMP agent |
prtMarkerLifeCount<p>Update: 60</p> |
| Printer status | <p>-</p> | SNMP agent |
hrPrinterStatus<p>Update: 60</p> |
| Device console display | <p>-</p> | SNMP agent |
prtConsoleDisplayBufferText<p>Update: 60</p> |
| Printer error state | <p>-</p> | SNMP agent |
hrPrinterDetectedErrorState<p>Update: 60</p> |
| Device serial number | <p>-</p> | SNMP agent |
prtGeneralSerialNumber<p>Update: 43200</p> |
| Device MAC address | <p>-</p> | SNMP agent |
ifPhysAddress<p>Update: 3600</p> |
| Cover $1 | <p>-</p> | SNMP agent |
prtCoverDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Cover Status of $1 | <p>-</p> | SNMP agent |
prtCoverStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input Capacity $1 | <p>-</p> | Calculated |
prtInputCapacity[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input current level $1 | <p>-</p> | SNMP agent |
prtInputCurrentLevel[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input $1 | <p>-</p> | SNMP agent |
prtInputDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input max capacity $1 | <p>-</p> | SNMP agent |
prtInputMaxCapacity[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input Media Name $1 | <p>-</p> | SNMP agent |
prtInputMediaName[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input Model $1 | <p>-</p> | SNMP agent |
prtInputModel[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input SerialNumber $1 | <p>-</p> | SNMP agent |
prtInputSerialNumber[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input status $1 | <p>-</p> | SNMP agent |
prtInputStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input Type $1 | <p>-</p> | SNMP agent |
prtInputType[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Media Path Description of supplies $1 | <p>-</p> | SNMP agent |
prtMediaPathDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Media Path Status of supplies $1 | <p>-</p> | SNMP agent |
prtMediaPathStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Media Path Type of supplies $1 | <p>-</p> | SNMP agent |
prtMediaPathType[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Color Value of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerColorantValue[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Capacity of supplies $1 | <p>-</p> | Calculated |
prtMarkerSuppliesCapacity[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Description of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerSuppliesDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Level of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerSuppliesLevel[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| max Capacity of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerSuppliesMaxCapacity[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Output $1 | <p>-</p> | SNMP agent |
prtOutputDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Output max Capacity $1 | <p>-</p> | SNMP agent |
prtOutputMaxCapacity[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Output remaining Capacity $1 | <p>-</p> | SNMP agent |
prtOutputRemainingCapacity[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Output Status $1 | <p>-</p> | SNMP agent |
prtOutputStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Admin status of interface $1 | <p>The desired state of the interface.</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Alias of interface $1 | <p>-</p> | SNMP agent |
ifAlias[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Description of interface $1 | <p>A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.</p> | SNMP agent |
ifDescr[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Inbound errors on interface $1 | <p>For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol.</p> | SNMP agent |
ifInErrors[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Incoming traffic on interface $1 | <p>The number of octets in valid MAC frames received on this interface, including the MAC header and FCS.</p> | SNMP agent |
ifInOctets[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Operational status of interface $1 | <p>The current operational state of the interface.</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Outbound errors on interface $1 | <p>For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.</p> | SNMP agent |
ifOutErrors[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Outgoing traffic on interface $1 | <p>The number of octets transmitted in MAC frames on this interface, including the MAC header and FCS.</p> | SNMP agent |
ifOutOctets[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} | <p>-</p> | <p>Expression: {SNMP Printer:ifOperStatus[{#SNMPVALUE}].diff(0)}=1</p><p>Recovery expression: </p> | information |
| Cover {#SNMPVALUE} on printer {HOST.NAME} is not closed | <p>-</p> | <p>Expression: {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>4 and {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>6</p><p>Recovery expression: </p> | information |
| Input {#SNMPVALUE} on printer {HOST.NAME} has changed | <p>-</p> | <p>Expression: {SNMP Printer:prtInputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| {#SNMPVALUE} is low on printer {HOST.NAME} | <p>-</p> | <p>Expression: {SNMP Printer:prtMarkerSuppliesCapacity[{#SNMPVALUE}].last()}<10</p><p>Recovery expression: </p> | information |
| Output {#SNMPVALUE} on printer {HOST.NAME} has changed | <p>-</p> | <p>Expression: {SNMP Printer:prtOutputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| Cover {#SNMPVALUE} on printer {HOST.NAME} is not closed (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>4 and {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>6</p><p>Recovery expression: </p> | information |
| Input {#SNMPVALUE} on printer {HOST.NAME} has changed (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtInputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| {#SNMPVALUE} is low on printer {HOST.NAME} (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtMarkerSuppliesCapacity[{#SNMPVALUE}].last()}<10</p><p>Recovery expression: </p> | information |
| Output {#SNMPVALUE} on printer {HOST.NAME} has changed (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtOutputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:ifOperStatus[{#SNMPVALUE}].diff(0)}=1</p><p>Recovery expression: </p> | information |
Good day!
This is my first attempt at creating a public template. As far as I’m aware, it should be operatable on multiple Dell laser printers. The model this was created on was the ‘Dell 3115CN’. Confirmed models that are supported:
I hope it’ll be of use to some of you. It’s been a fun project.
Thomas Roefs
There are no macros links in this template.
| Name |
|---|
| Template SNMP Generic |
| Template SNMP Interfaces |
| Template SNMP Device |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Cover | <p>-</p> | SNMP agent |
prtCoverDescription<p>Update: 3600</p> |
| Input | <p>-</p> | SNMP agent |
prtInputDescription<p>Update: 3600</p> |
| Media Path | <p>-</p> | SNMP agent |
prtMediaPathDescription<p>Update: 3600</p> |
| Supplies | <p>-</p> | SNMP agent |
prtMarkerSuppliesDescription<p>Update: 3600</p> |
| Output | <p>-</p> | SNMP agent |
prtOutputDescription<p>Update: 3600</p> |
| Network interfaces | <p>You may also consider using IF-MIB::ifType or IF-MIB::ifAlias for discovery depending on your filtering needs. {$SNMP_COMMUNITY} is a global macro.</p> | SNMP agent |
ifDescr<p>Update: 3600</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Device Type | <p>-</p> | SNMP agent |
hrDeviceDescr<p>Update: 43200</p> |
| Printer power on counter | <p>-</p> | SNMP agent |
prtMarkerPowerOnCount<p>Update: 60</p> |
| Printer lifetime counter | <p>-</p> | SNMP agent |
prtMarkerLifeCount<p>Update: 60</p> |
| Printer status | <p>-</p> | SNMP agent |
hrPrinterStatus<p>Update: 60</p> |
| Device console display | <p>-</p> | SNMP agent |
prtConsoleDisplayBufferText<p>Update: 60</p> |
| Printer error state | <p>-</p> | SNMP agent |
hrPrinterDetectedErrorState<p>Update: 60</p> |
| Device serial number | <p>-</p> | SNMP agent |
prtGeneralSerialNumber<p>Update: 43200</p> |
| Device MAC address | <p>-</p> | SNMP agent |
ifPhysAddress<p>Update: 3600</p> |
| Cover $1 | <p>-</p> | SNMP agent |
prtCoverDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Cover Status of $1 | <p>-</p> | SNMP agent |
prtCoverStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input Capacity $1 | <p>-</p> | Calculated |
prtInputCapacity[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input current level $1 | <p>-</p> | SNMP agent |
prtInputCurrentLevel[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input $1 | <p>-</p> | SNMP agent |
prtInputDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input max capacity $1 | <p>-</p> | SNMP agent |
prtInputMaxCapacity[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input Media Name $1 | <p>-</p> | SNMP agent |
prtInputMediaName[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input Model $1 | <p>-</p> | SNMP agent |
prtInputModel[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input SerialNumber $1 | <p>-</p> | SNMP agent |
prtInputSerialNumber[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Input status $1 | <p>-</p> | SNMP agent |
prtInputStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Input Type $1 | <p>-</p> | SNMP agent |
prtInputType[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Media Path Description of supplies $1 | <p>-</p> | SNMP agent |
prtMediaPathDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Media Path Status of supplies $1 | <p>-</p> | SNMP agent |
prtMediaPathStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Media Path Type of supplies $1 | <p>-</p> | SNMP agent |
prtMediaPathType[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Color Value of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerColorantValue[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Capacity of supplies $1 | <p>-</p> | Calculated |
prtMarkerSuppliesCapacity[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Description of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerSuppliesDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Level of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerSuppliesLevel[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| max Capacity of supplies $1 | <p>-</p> | SNMP agent |
prtMarkerSuppliesMaxCapacity[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Output $1 | <p>-</p> | SNMP agent |
prtOutputDescription[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Output max Capacity $1 | <p>-</p> | SNMP agent |
prtOutputMaxCapacity[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Output remaining Capacity $1 | <p>-</p> | SNMP agent |
prtOutputRemainingCapacity[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Output Status $1 | <p>-</p> | SNMP agent |
prtOutputStatus[{#SNMPVALUE}]<p>Update: 600</p><p>LLD</p> |
| Admin status of interface $1 | <p>The desired state of the interface.</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Alias of interface $1 | <p>-</p> | SNMP agent |
ifAlias[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Description of interface $1 | <p>A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.</p> | SNMP agent |
ifDescr[{#SNMPVALUE}]<p>Update: 3600</p><p>LLD</p> |
| Inbound errors on interface $1 | <p>For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol.</p> | SNMP agent |
ifInErrors[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Incoming traffic on interface $1 | <p>The number of octets in valid MAC frames received on this interface, including the MAC header and FCS.</p> | SNMP agent |
ifInOctets[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Operational status of interface $1 | <p>The current operational state of the interface.</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Outbound errors on interface $1 | <p>For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.</p> | SNMP agent |
ifOutErrors[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Outgoing traffic on interface $1 | <p>The number of octets transmitted in MAC frames on this interface, including the MAC header and FCS.</p> | SNMP agent |
ifOutOctets[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} | <p>-</p> | <p>Expression: {SNMP Printer:ifOperStatus[{#SNMPVALUE}].diff(0)}=1</p><p>Recovery expression: </p> | information |
| Cover {#SNMPVALUE} on printer {HOST.NAME} is not closed | <p>-</p> | <p>Expression: {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>4 and {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>6</p><p>Recovery expression: </p> | information |
| Input {#SNMPVALUE} on printer {HOST.NAME} has changed | <p>-</p> | <p>Expression: {SNMP Printer:prtInputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| {#SNMPVALUE} is low on printer {HOST.NAME} | <p>-</p> | <p>Expression: {SNMP Printer:prtMarkerSuppliesCapacity[{#SNMPVALUE}].last()}<10</p><p>Recovery expression: </p> | information |
| Output {#SNMPVALUE} on printer {HOST.NAME} has changed | <p>-</p> | <p>Expression: {SNMP Printer:prtOutputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| Cover {#SNMPVALUE} on printer {HOST.NAME} is not closed (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>4 and {SNMP Printer:prtCoverStatus[{#SNMPVALUE}].last(,600)}<>6</p><p>Recovery expression: </p> | information |
| Input {#SNMPVALUE} on printer {HOST.NAME} has changed (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtInputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| {#SNMPVALUE} is low on printer {HOST.NAME} (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtMarkerSuppliesCapacity[{#SNMPVALUE}].last()}<10</p><p>Recovery expression: </p> | information |
| Output {#SNMPVALUE} on printer {HOST.NAME} has changed (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:prtOutputStatus[{#SNMPVALUE}].last(,600)}<>0</p><p>Recovery expression: </p> | information |
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} (LLD) | <p>-</p> | <p>Expression: {SNMP Printer:ifOperStatus[{#SNMPVALUE}].diff(0)}=1</p><p>Recovery expression: </p> | information |