A template to check supplies on OKIDATA printers (you’ll need the OKIDATA MIB).
It provides items and triggers for toner, drum, fuser and belt levels as well as a simple paper count.
I’ve been using it with an OKI C5950 and an OKI C610 printer.
You’ll need to add a ‘zabbix’ snmp read community on your printer (from the Admin webpage choose Network->SNMP->Settings->Step2) or change the community to ‘public’ within the template.
Triggers will be activated at 11% for toner and 10% for drums, belt and fuser unit, which should be ample time to restack on supplies unless you’re really printing loads of pages.
EDIT: 2017-06-01 Updated this for adjusted trigger levels on toner and drums as the chosen ones were too low.
Korbinian Grote
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Belt max level | <p>-</p> | SNMP agent |
usageBeltMaxLevel.1<p>Update: 300</p> |
| Fuser max level | <p>-</p> | SNMP agent |
usageFuserMaxLevel.1<p>Update: 300</p> |
| Magenta Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.3<p>Update: 300</p> |
| Cyan Drum level % | <p>-</p> | Calculated |
cyanDrumLevelPercCalc<p>Update: 300</p> |
| Black Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.1<p>Update: 300</p> |
| Black Drum level % | <p>-</p> | Calculated |
blackDrumLevelPercCalc<p>Update: 300</p> |
| Cyan Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.2<p>Update: 300</p> |
| Yellow Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.4<p>Update: 300</p> |
| Black Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.1<p>Update: 300</p> |
| Magenta Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.3<p>Update: 300</p> |
| Total pages printed | <p>-</p> | SNMP agent |
usagePrinterUnitCounter.1<p>Update: 300</p> |
| Yellow Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.4<p>Update: 300</p> |
| Black Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.1<p>Update: 300</p> |
| Fuser count | <p>-</p> | SNMP agent |
usageFuserCurrentLevel.1<p>Update: 300</p> |
| Yellow Drum level % | <p>-</p> | Calculated |
yellowDrumLevelPercCalc<p>Update: 300</p> |
| Cyan Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.2<p>Update: 300</p> |
| Belt count | <p>-</p> | SNMP agent |
usageBeltCurrentLevel.1<p>Update: 300</p> |
| Magenta Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.3<p>Update: 300</p> |
| Cyan Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.2<p>Update: 300</p> |
| Magenta Drum level % | <p>-</p> | Calculated |
magentaDrumLevelPercCalc<p>Update: 300</p> |
| Belt level % | <p>-</p> | Calculated |
BeltLevelPercCalc<p>Update: 300</p> |
| Fuser level % | <p>-</p> | Calculated |
FuserLevelPercCalc<p>Update: 300</p> |
| Yellow Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.4<p>Update: 300</p> |
There are no triggers in this template.
A template to check supplies on OKIDATA printers (you’ll need the OKIDATA MIB).
It provides items and triggers for toner, drum, fuser and belt levels as well as a simple paper count.
I’ve been using it with an OKI C5950 and an OKI C610 printer.
You’ll need to add a ‘zabbix’ snmp read community on your printer (from the Admin webpage choose Network->SNMP->Settings->Step2) or change the community to ‘public’ within the template.
Triggers will be activated at 11% for toner and 10% for drums, belt and fuser unit, which should be ample time to restack on supplies unless you’re really printing loads of pages.
EDIT: 2017-06-01 Updated this for adjusted trigger levels on toner and drums as the chosen ones were too low.
Korbinian Grote
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Fuser level % | <p>-</p> | Calculated |
FuserLevelPercCalc<p>Update: 300</p> |
| Cyan Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.2<p>Update: 300</p> |
| Black Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.1<p>Update: 300</p> |
| Belt level % | <p>-</p> | Calculated |
BeltLevelPercCalc<p>Update: 300</p> |
| Cyan Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.2<p>Update: 300</p> |
| Yellow Drum level % | <p>-</p> | Calculated |
yellowDrumLevelPercCalc<p>Update: 300</p> |
| Magenta Drum level % | <p>-</p> | Calculated |
magentaDrumLevelPercCalc<p>Update: 300</p> |
| Yellow Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.4<p>Update: 300</p> |
| Fuser max level | <p>-</p> | SNMP agent |
usageFuserMaxLevel.1<p>Update: 300</p> |
| Black Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.1<p>Update: 300</p> |
| Belt count | <p>-</p> | SNMP agent |
usageBeltCurrentLevel.1<p>Update: 300</p> |
| Magenta Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.3<p>Update: 300</p> |
| Total pages printed | <p>-</p> | SNMP agent |
usagePrinterUnitCounter.1<p>Update: 300</p> |
| Yellow Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.4<p>Update: 300</p> |
| Magenta Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.3<p>Update: 300</p> |
| Fuser count | <p>-</p> | SNMP agent |
usageFuserCurrentLevel.1<p>Update: 300</p> |
| Cyan Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.2<p>Update: 300</p> |
| Black Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.1<p>Update: 300</p> |
| Belt max level | <p>-</p> | SNMP agent |
usageBeltMaxLevel.1<p>Update: 300</p> |
| Black Drum level % | <p>-</p> | Calculated |
blackDrumLevelPercCalc<p>Update: 300</p> |
| Magenta Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.3<p>Update: 300</p> |
| Yellow Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.4<p>Update: 300</p> |
| Cyan Drum level % | <p>-</p> | Calculated |
cyanDrumLevelPercCalc<p>Update: 300</p> |
There are no triggers in this template.
A template to check supplies on OKIDATA printers (you’ll need the OKIDATA MIB).
It provides items and triggers for toner, drum, fuser and belt levels as well as a simple paper count.
I’ve been using it with an OKI C5950 and an OKI C610 printer.
You’ll need to add a ‘zabbix’ snmp read community on your printer (from the Admin webpage choose Network->SNMP->Settings->Step2) or change the community to ‘public’ within the template.
Triggers will be activated at 11% for toner and 10% for drums, belt and fuser unit, which should be ample time to restack on supplies unless you’re really printing loads of pages.
EDIT: 2017-06-01 Updated this for adjusted trigger levels on toner and drums as the chosen ones were too low.
Korbinian Grote
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Fuser level % | <p>-</p> | Calculated |
FuserLevelPercCalc<p>Update: 300</p> |
| Cyan Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.2<p>Update: 300</p> |
| Black Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.1<p>Update: 300</p> |
| Belt level % | <p>-</p> | Calculated |
BeltLevelPercCalc<p>Update: 300</p> |
| Cyan Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.2<p>Update: 300</p> |
| Yellow Drum level % | <p>-</p> | Calculated |
yellowDrumLevelPercCalc<p>Update: 300</p> |
| Magenta Drum level % | <p>-</p> | Calculated |
magentaDrumLevelPercCalc<p>Update: 300</p> |
| Yellow Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.4<p>Update: 300</p> |
| Fuser max level | <p>-</p> | SNMP agent |
usageFuserMaxLevel.1<p>Update: 300</p> |
| Black Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.1<p>Update: 300</p> |
| Belt count | <p>-</p> | SNMP agent |
usageBeltCurrentLevel.1<p>Update: 300</p> |
| Magenta Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.3<p>Update: 300</p> |
| Total pages printed | <p>-</p> | SNMP agent |
usagePrinterUnitCounter.1<p>Update: 300</p> |
| Yellow Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.4<p>Update: 300</p> |
| Magenta Drum max | <p>-</p> | SNMP agent |
usageDrumMaxLevel.3<p>Update: 300</p> |
| Fuser count | <p>-</p> | SNMP agent |
usageFuserCurrentLevel.1<p>Update: 300</p> |
| Cyan Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.2<p>Update: 300</p> |
| Black Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.1<p>Update: 300</p> |
| Belt max level | <p>-</p> | SNMP agent |
usageBeltMaxLevel.1<p>Update: 300</p> |
| Black Drum level % | <p>-</p> | Calculated |
blackDrumLevelPercCalc<p>Update: 300</p> |
| Magenta Toner Level % | <p>-</p> | SNMP agent |
usageTonerCurrentLevel.3<p>Update: 300</p> |
| Yellow Drum count | <p>-</p> | SNMP agent |
usageDrumCurrentLevel.4<p>Update: 300</p> |
| Cyan Drum level % | <p>-</p> | Calculated |
cyanDrumLevelPercCalc<p>Update: 300</p> |
There are no triggers in this template.