Template made based on Phillip Hernandez template: https://share.zabbix.com/power-ups/apc/apc-ups
All OID’s were changed to match general MIB for UPS.
New graphs were also added.
25 Items
8 Triggers
8 Graphs
I also have a template for non three-phase ups, feel free to check: https://share.zabbix.com/power-ups/network-ups-generic
Diogo Teixeira
There are no macros links in this template.
Name |
---|
Template Module ICMP Ping |
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS output load (%) | <p>-</p> | SNMP agent |
upsAdvOutputLoad<p>Update: 60</p> |
Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 60</p> |
UPS output current L1 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent1<p>Update: 60</p> |
UPS output power L3 | <p>-</p> | SNMP agent |
upsAdvOutputPower3<p>Update: 60</p> |
UPS output current L2 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent2<p>Update: 60</p> |
UPS input voltage L2 | <p>-</p> | SNMP agent |
upsAdvInputVoltage2<p>Update: 60</p> |
UPS input voltage L1 | <p>-</p> | SNMP agent |
upsAdvInputVoltage1<p>Update: 60</p> |
UPS output voltage L2 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage2<p>Update: 60</p> |
UPS input voltage L3 | <p>-</p> | SNMP agent |
upsAdvInputVoltage3<p>Update: 60</p> |
UPS time on battery | <p>-</p> | SNMP agent |
upsBasicBatteryTimeOnBattery<p>Update: 60</p> |
UPS output voltage L1 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage1<p>Update: 60</p> |
UPS output power L1 | <p>-</p> | SNMP agent |
upsAdvOutputPower1<p>Update: 60</p> |
UPS output power L2 | <p>-</p> | SNMP agent |
upsAdvOutputPower2<p>Update: 60</p> |
Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 60</p> |
UPS battery status | <p>-</p> | SNMP agent |
upsBasicBatteryStatus<p>Update: 60</p> |
UPS output current L3 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent3<p>Update: 60</p> |
Software version (full) | <p>-</p> | SNMP agent |
sysDescr<p>Update: 60</p> |
UPS battery temperature | <p>-</p> | SNMP agent |
upsAdvBatteryTemperature<p>Update: 60</p> |
UPS battery capacity (%) | <p>-</p> | SNMP agent |
upsAdvBatteryCapacity<p>Update: 60</p> |
UPS output voltage L3 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage3<p>Update: 60</p> |
Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 60</p> |
Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 60</p> |
There are no triggers in this template.
Template made based on Phillip Hernandez template: https://share.zabbix.com/power-ups/apc/apc-ups
All OID’s were changed to match general MIB for UPS.
New graphs were also added.
25 Items
8 Triggers
8 Graphs
I also have a template for non three-phase ups, feel free to check: https://share.zabbix.com/power-ups/network-ups-generic
Diogo Teixeira
There are no macros links in this template.
Name |
---|
Template Module ICMP Ping |
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS battery temperature | <p>-</p> | SNMP agent |
upsAdvBatteryTemperature<p>Update: 60</p> |
UPS output current L2 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent2<p>Update: 60</p> |
UPS output power L1 | <p>-</p> | SNMP agent |
upsAdvOutputPower1<p>Update: 60</p> |
UPS input voltage L3 | <p>-</p> | SNMP agent |
upsAdvInputVoltage3<p>Update: 60</p> |
UPS output current L1 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent1<p>Update: 60</p> |
UPS output voltage L2 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage2<p>Update: 60</p> |
UPS output voltage L3 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage3<p>Update: 60</p> |
UPS battery status | <p>-</p> | SNMP agent |
upsBasicBatteryStatus<p>Update: 60</p> |
UPS output voltage L1 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage1<p>Update: 60</p> |
Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 60</p> |
UPS input voltage L2 | <p>-</p> | SNMP agent |
upsAdvInputVoltage2<p>Update: 60</p> |
UPS output power L3 | <p>-</p> | SNMP agent |
upsAdvOutputPower3<p>Update: 60</p> |
UPS output load (%) | <p>-</p> | SNMP agent |
upsAdvOutputLoad<p>Update: 60</p> |
Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 60</p> |
UPS output current L3 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent3<p>Update: 60</p> |
UPS input voltage L1 | <p>-</p> | SNMP agent |
upsAdvInputVoltage1<p>Update: 60</p> |
Software version (full) | <p>-</p> | SNMP agent |
sysDescr<p>Update: 60</p> |
Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 60</p> |
UPS time on battery | <p>-</p> | SNMP agent |
upsBasicBatteryTimeOnBattery<p>Update: 60</p> |
UPS battery capacity (%) | <p>-</p> | SNMP agent |
upsAdvBatteryCapacity<p>Update: 60</p> |
UPS output power L2 | <p>-</p> | SNMP agent |
upsAdvOutputPower2<p>Update: 60</p> |
Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 60</p> |
There are no triggers in this template.
Template made based on Phillip Hernandez template: https://share.zabbix.com/power-ups/apc/apc-ups
All OID’s were changed to match general MIB for UPS.
New graphs were also added.
25 Items
8 Triggers
8 Graphs
I also have a template for non three-phase ups, feel free to check: https://share.zabbix.com/power-ups/network-ups-generic
Diogo Teixeira
There are no macros links in this template.
Name |
---|
Template Module ICMP Ping |
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS battery temperature | <p>-</p> | SNMP agent |
upsAdvBatteryTemperature<p>Update: 60</p> |
UPS output current L2 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent2<p>Update: 60</p> |
UPS output power L1 | <p>-</p> | SNMP agent |
upsAdvOutputPower1<p>Update: 60</p> |
UPS input voltage L3 | <p>-</p> | SNMP agent |
upsAdvInputVoltage3<p>Update: 60</p> |
UPS output current L1 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent1<p>Update: 60</p> |
UPS output voltage L2 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage2<p>Update: 60</p> |
UPS output voltage L3 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage3<p>Update: 60</p> |
UPS battery status | <p>-</p> | SNMP agent |
upsBasicBatteryStatus<p>Update: 60</p> |
UPS output voltage L1 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage1<p>Update: 60</p> |
Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 60</p> |
UPS input voltage L2 | <p>-</p> | SNMP agent |
upsAdvInputVoltage2<p>Update: 60</p> |
UPS output power L3 | <p>-</p> | SNMP agent |
upsAdvOutputPower3<p>Update: 60</p> |
UPS output load (%) | <p>-</p> | SNMP agent |
upsAdvOutputLoad<p>Update: 60</p> |
Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 60</p> |
UPS output current L3 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent3<p>Update: 60</p> |
UPS input voltage L1 | <p>-</p> | SNMP agent |
upsAdvInputVoltage1<p>Update: 60</p> |
Software version (full) | <p>-</p> | SNMP agent |
sysDescr<p>Update: 60</p> |
Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 60</p> |
UPS time on battery | <p>-</p> | SNMP agent |
upsBasicBatteryTimeOnBattery<p>Update: 60</p> |
UPS battery capacity (%) | <p>-</p> | SNMP agent |
upsAdvBatteryCapacity<p>Update: 60</p> |
UPS output power L2 | <p>-</p> | SNMP agent |
upsAdvOutputPower2<p>Update: 60</p> |
Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 60</p> |
There are no triggers in this template.