Updated! Fixed an incorrect OID and refined one of the graphs.
This template was made from scratch for a SU20KRT8 (Using the newest Tripplite MIBs. Zabbix devs, come on and write MIB ingestion into the GUI already.). However, it should support any type of single phase UPS and likely 3 phase.
I may add line discovery in later. But for now this template should cover everything most will need. Including triggers for temp, battery condition, bypass, voltage changes, etc.
Enjoy and please rate!
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| upsInputVoltage.1 | <p>-</p> | SNMP agent |
upsInputVoltage.1<p>Update: 30</p> |
| upsIdentModel | <p>-</p> | SNMP agent |
upsIdentModel<p>Update: 86400</p> |
| upsInputLineBads | <p>-</p> | SNMP agent |
upsInputLineBads<p>Update: 30</p> |
| upsBatteryVoltage | <p>-</p> | SNMP agent |
upsBatteryVoltage<p>Update: 60</p> |
| upsOutputVoltage.1 | <p>-</p> | SNMP agent |
upsOutputVoltage.1<p>Update: 30</p> |
| upsAlarmsPresent | <p>-</p> | SNMP agent |
upsAlarmsPresent<p>Update: 30</p> |
| upsBatteryStatus | <p>-</p> | SNMP agent |
upsBatteryStatus<p>Update: 30</p> |
| upsBypassPower.1 | <p>-</p> | SNMP agent |
upsBypassPower.1<p>Update: 30</p> |
| upsOutputPercentLoad.1 | <p>-</p> | SNMP agent |
upsOutputPercentLoad.1<p>Update: 30</p> |
| upsSecondsOnBattery | <p>-</p> | SNMP agent |
upsSecondsOnBattery<p>Update: 30</p> |
| upsEstimatedMinutesRemaining | <p>-</p> | SNMP agent |
upsEstimatedMinutesRemaining<p>Update: 30</p> |
| upsEstimatedChargeRemaining | <p>-</p> | SNMP agent |
upsEstimatedChargeRemaining<p>Update: 60</p> |
| upsOutputPower.1 | <p>-</p> | SNMP agent |
upsOutputPower.1<p>Update: 30</p> |
| upsOutputSource | <p>-</p> | SNMP agent |
upsOutputSource<p>Update: 30</p> |
| upsBypassFrequency | <p>-</p> | SNMP agent |
upsBypassFrequency<p>Update: 30</p> |
| upsBatteryTemperature | <p>-</p> | SNMP agent |
upsBatteryTemperature<p>Update: 60</p> |
| upsBypassCurrent.1 | <p>-</p> | SNMP agent |
upsBypassCurrent.1<p>Update: 30</p> |
| upsInputFrequency.1 | <p>-</p> | SNMP agent |
upsInputFrequency.1<p>Update: 30</p> |
| upsIdentUPSSoftwareVersion | <p>-</p> | SNMP agent |
upsIdentUPSSoftwareVersion<p>Update: 600</p> |
| upsBypassVoltage.1 | <p>-</p> | SNMP agent |
upsBypassVoltage.1<p>Update: 30</p> |
| upsOutputFrequency | <p>-</p> | SNMP agent |
upsOutputFrequency<p>Update: 30</p> |
| upsOutputCurrent.1 | <p>-</p> | SNMP agent |
upsOutputCurrent.1<p>Update: 30</p> |
| upsIdentAgentSoftwareVersion | <p>-</p> | SNMP agent |
upsIdentAgentSoftwareVersion<p>Update: 600</p> |
There are no triggers in this template.
Updated! Fixed an incorrect OID and refined one of the graphs.
This template was made from scratch for a SU20KRT8 (Using the newest Tripplite MIBs. Zabbix devs, come on and write MIB ingestion into the GUI already.). However, it should support any type of single phase UPS and likely 3 phase.
I may add line discovery in later. But for now this template should cover everything most will need. Including triggers for temp, battery condition, bypass, voltage changes, etc.
Enjoy and please rate!
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| upsEstimatedMinutesRemaining | <p>-</p> | SNMP agent |
upsEstimatedMinutesRemaining<p>Update: 30</p> |
| upsBatteryStatus | <p>-</p> | SNMP agent |
upsBatteryStatus<p>Update: 30</p> |
| upsOutputCurrent.1 | <p>-</p> | SNMP agent |
upsOutputCurrent.1<p>Update: 30</p> |
| upsInputFrequency.1 | <p>-</p> | SNMP agent |
upsInputFrequency.1<p>Update: 30</p> |
| upsIdentAgentSoftwareVersion | <p>-</p> | SNMP agent |
upsIdentAgentSoftwareVersion<p>Update: 600</p> |
| upsIdentModel | <p>-</p> | SNMP agent |
upsIdentModel<p>Update: 86400</p> |
| upsInputLineBads | <p>-</p> | SNMP agent |
upsInputLineBads<p>Update: 30</p> |
| upsBatteryVoltage | <p>-</p> | SNMP agent |
upsBatteryVoltage<p>Update: 60</p> |
| upsAlarmsPresent | <p>-</p> | SNMP agent |
upsAlarmsPresent<p>Update: 30</p> |
| upsIdentUPSSoftwareVersion | <p>-</p> | SNMP agent |
upsIdentUPSSoftwareVersion<p>Update: 600</p> |
| upsOutputFrequency | <p>-</p> | SNMP agent |
upsOutputFrequency<p>Update: 30</p> |
| upsBypassFrequency | <p>-</p> | SNMP agent |
upsBypassFrequency<p>Update: 30</p> |
| upsBypassVoltage.1 | <p>-</p> | SNMP agent |
upsBypassVoltage.1<p>Update: 30</p> |
| upsBypassCurrent.1 | <p>-</p> | SNMP agent |
upsBypassCurrent.1<p>Update: 30</p> |
| upsInputVoltage.1 | <p>-</p> | SNMP agent |
upsInputVoltage.1<p>Update: 30</p> |
| upsOutputPercentLoad.1 | <p>-</p> | SNMP agent |
upsOutputPercentLoad.1<p>Update: 30</p> |
| upsBypassPower.1 | <p>-</p> | SNMP agent |
upsBypassPower.1<p>Update: 30</p> |
| upsBatteryTemperature | <p>-</p> | SNMP agent |
upsBatteryTemperature<p>Update: 60</p> |
| upsOutputVoltage.1 | <p>-</p> | SNMP agent |
upsOutputVoltage.1<p>Update: 30</p> |
| upsSecondsOnBattery | <p>-</p> | SNMP agent |
upsSecondsOnBattery<p>Update: 30</p> |
| upsOutputSource | <p>-</p> | SNMP agent |
upsOutputSource<p>Update: 30</p> |
| upsEstimatedChargeRemaining | <p>-</p> | SNMP agent |
upsEstimatedChargeRemaining<p>Update: 60</p> |
| upsOutputPower.1 | <p>-</p> | SNMP agent |
upsOutputPower.1<p>Update: 30</p> |
There are no triggers in this template.
Updated! Fixed an incorrect OID and refined one of the graphs.
This template was made from scratch for a SU20KRT8 (Using the newest Tripplite MIBs. Zabbix devs, come on and write MIB ingestion into the GUI already.). However, it should support any type of single phase UPS and likely 3 phase.
I may add line discovery in later. But for now this template should cover everything most will need. Including triggers for temp, battery condition, bypass, voltage changes, etc.
Enjoy and please rate!
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| upsEstimatedMinutesRemaining | <p>-</p> | SNMP agent |
upsEstimatedMinutesRemaining<p>Update: 30</p> |
| upsBatteryStatus | <p>-</p> | SNMP agent |
upsBatteryStatus<p>Update: 30</p> |
| upsOutputCurrent.1 | <p>-</p> | SNMP agent |
upsOutputCurrent.1<p>Update: 30</p> |
| upsInputFrequency.1 | <p>-</p> | SNMP agent |
upsInputFrequency.1<p>Update: 30</p> |
| upsIdentAgentSoftwareVersion | <p>-</p> | SNMP agent |
upsIdentAgentSoftwareVersion<p>Update: 600</p> |
| upsIdentModel | <p>-</p> | SNMP agent |
upsIdentModel<p>Update: 86400</p> |
| upsInputLineBads | <p>-</p> | SNMP agent |
upsInputLineBads<p>Update: 30</p> |
| upsBatteryVoltage | <p>-</p> | SNMP agent |
upsBatteryVoltage<p>Update: 60</p> |
| upsAlarmsPresent | <p>-</p> | SNMP agent |
upsAlarmsPresent<p>Update: 30</p> |
| upsIdentUPSSoftwareVersion | <p>-</p> | SNMP agent |
upsIdentUPSSoftwareVersion<p>Update: 600</p> |
| upsOutputFrequency | <p>-</p> | SNMP agent |
upsOutputFrequency<p>Update: 30</p> |
| upsBypassFrequency | <p>-</p> | SNMP agent |
upsBypassFrequency<p>Update: 30</p> |
| upsBypassVoltage.1 | <p>-</p> | SNMP agent |
upsBypassVoltage.1<p>Update: 30</p> |
| upsBypassCurrent.1 | <p>-</p> | SNMP agent |
upsBypassCurrent.1<p>Update: 30</p> |
| upsInputVoltage.1 | <p>-</p> | SNMP agent |
upsInputVoltage.1<p>Update: 30</p> |
| upsOutputPercentLoad.1 | <p>-</p> | SNMP agent |
upsOutputPercentLoad.1<p>Update: 30</p> |
| upsBypassPower.1 | <p>-</p> | SNMP agent |
upsBypassPower.1<p>Update: 30</p> |
| upsBatteryTemperature | <p>-</p> | SNMP agent |
upsBatteryTemperature<p>Update: 60</p> |
| upsOutputVoltage.1 | <p>-</p> | SNMP agent |
upsOutputVoltage.1<p>Update: 30</p> |
| upsSecondsOnBattery | <p>-</p> | SNMP agent |
upsSecondsOnBattery<p>Update: 30</p> |
| upsOutputSource | <p>-</p> | SNMP agent |
upsOutputSource<p>Update: 30</p> |
| upsEstimatedChargeRemaining | <p>-</p> | SNMP agent |
upsEstimatedChargeRemaining<p>Update: 60</p> |
| upsOutputPower.1 | <p>-</p> | SNMP agent |
upsOutputPower.1<p>Update: 30</p> |
There are no triggers in this template.