Basic Riello UPS Template no MIBs needed
I. Aliaga U.
Name | Description | Default | Type |
---|---|---|---|
{$NOMINAL_FREQUENCY} | <p>-</p> | 60 |
Text macro |
{$NOMINAL_VOLTAGE} | <p>-</p> | 230 |
Text macro |
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Input Lines | <p>-</p> | SNMP agent |
InputLinesD<p>Update: 30s</p> |
Bypass Lines | <p>-</p> | SNMP agent |
BypassLinesD<p>Update: 30s</p> |
Output Lines | <p>-</p> | SNMP agent |
OutputLinesD<p>Update: 30s</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Estimated Minutes Remaining | <p>-</p> | SNMP agent |
rupsEstimatedMinutesRemaining.0<p>Update: 60s</p> |
Software version | <p>-</p> | SNMP agent |
rupsIdentUPSSoftwareVersion.0<p>Update: 1d</p> |
Ups Agent Version | <p>-</p> | SNMP agent |
rupsIdentAgentSoftwareVersion.0<p>Update: 1d</p> |
Model name | <p>-</p> | SNMP agent |
rupsIdentModel.0<p>Update: 1d</p> |
Estimated Charge Remaining | <p>-</p> | SNMP agent |
rupsEstimatedChargeRemaining.0<p>Update: 60s</p> |
Battery Voltage | <p>-</p> | SNMP agent |
rupsBatteryVoltage.0<p>Update: 60s</p> |
Seconds on Battery | <p>-</p> | SNMP agent |
rupsSecondsOnBattery.0<p>Update: 60s</p> |
Input Line Bads | <p>-</p> | SNMP agent |
rupsInputLineBads.0<p>Update: 60s</p> |
Bypass frequency | <p>-</p> | SNMP agent |
rupsBypassFrequency.0<p>Update: 60s</p> |
System Temperature | <p>-</p> | SNMP agent |
rupsSystemTemperature.0<p>Update: 30s</p> |
Battery Temperature | <p>-</p> | SNMP agent |
rupsBatteryTemperature.0<p>Update: 60s</p> |
Battery Status | <p>-</p> | SNMP agent |
rupsBatteryStatus.0<p>Update: 60s</p> |
Alarms Present | <p>-</p> | SNMP agent |
upsAlarmsPresent.0<p>Update: 60s</p> |
Battery Current | <p>-</p> | SNMP agent |
rupsBatteryCurrent.0<p>Update: 60s</p> |
Output source | <p>-</p> | SNMP agent |
rupsOutputSource.0<p>Update: 60s</p> |
Output frequency | <p>-</p> | SNMP agent |
rupsOutputFrequency.0<p>Update: 60s</p> |
Agent availability | <p>The agent always returns 1 for this item. It could be used in combination with nodata() for availability check.</p> | Zabbix internal |
zabbix[host,snmp,available]<p>Update: 30s</p> |
Line {#SNMPINDEX} Input Current | <p>-</p> | SNMP agent |
rupsInputCurrent.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Input Frequency | <p>-</p> | SNMP agent |
rupsInputFrequency.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Input True Power | <p>-</p> | SNMP agent |
rupsInputTruePower.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Input Voltage | <p>-</p> | SNMP agent |
rupsInputVolage.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Bypass Current | <p>-</p> | SNMP agent |
rupsBypassCurrent[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Bypass Power | <p>-</p> | SNMP agent |
rupsBypassPower[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Bypass Voltage | <p>-</p> | SNMP agent |
rupsBypassVoltage[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Current | <p>-</p> | SNMP agent |
rupsOutputCurrent.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Peak Current | <p>-</p> | SNMP agent |
rupsOutputPeakCurrent.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output % Load | <p>-</p> | SNMP agent |
rupsOutputPercetLoad.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Power | <p>-</p> | SNMP agent |
rupsOutputPower.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Voltage | <p>-</p> | SNMP agent |
rupsOutputVoltage.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
Bypass voltage on line {#SNMPINDEX} below {$NOMINAL_VOLTAGE} | <p>-</p> | <p>Expression: {SNMP Riello UPS:rupsInputVolage.[{#SNMPINDEX}].max(#2)}<(230*0.9)</p><p>Recovery expression: </p> | high |
Bypass voltage on line {#SNMPINDEX} below {$NOMINAL_VOLTAGE} (LLD) | <p>-</p> | <p>Expression: {SNMP Riello UPS:rupsInputVolage.[{#SNMPINDEX}].max(#2)}<(230*0.9)</p><p>Recovery expression: </p> | high |
Basic Riello UPS Template no MIBs needed
I. Aliaga U.
Name | Description | Default | Type |
---|---|---|---|
{$NOMINAL_FREQUENCY} | <p>-</p> | 60 |
Text macro |
{$NOMINAL_VOLTAGE} | <p>-</p> | 230 |
Text macro |
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Input Lines | <p>-</p> | SNMP agent |
InputLinesD<p>Update: 30s</p> |
Bypass Lines | <p>-</p> | SNMP agent |
BypassLinesD<p>Update: 30s</p> |
Output Lines | <p>-</p> | SNMP agent |
OutputLinesD<p>Update: 30s</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Battery Status | <p>-</p> | SNMP agent |
rupsBatteryStatus.0<p>Update: 60s</p> |
Estimated Charge Remaining | <p>-</p> | SNMP agent |
rupsEstimatedChargeRemaining.0<p>Update: 60s</p> |
Software version | <p>-</p> | SNMP agent |
rupsIdentUPSSoftwareVersion.0<p>Update: 1d</p> |
Seconds on Battery | <p>-</p> | SNMP agent |
rupsSecondsOnBattery.0<p>Update: 60s</p> |
Battery Voltage | <p>-</p> | SNMP agent |
rupsBatteryVoltage.0<p>Update: 60s</p> |
Input Line Bads | <p>-</p> | SNMP agent |
rupsInputLineBads.0<p>Update: 60s</p> |
Model name | <p>-</p> | SNMP agent |
rupsIdentModel.0<p>Update: 1d</p> |
Bypass frequency | <p>-</p> | SNMP agent |
rupsBypassFrequency.0<p>Update: 60s</p> |
Estimated Minutes Remaining | <p>-</p> | SNMP agent |
rupsEstimatedMinutesRemaining.0<p>Update: 60s</p> |
Alarms Present | <p>-</p> | SNMP agent |
upsAlarmsPresent.0<p>Update: 60s</p> |
Ups Agent Version | <p>-</p> | SNMP agent |
rupsIdentAgentSoftwareVersion.0<p>Update: 1d</p> |
Output frequency | <p>-</p> | SNMP agent |
rupsOutputFrequency.0<p>Update: 60s</p> |
Battery Temperature | <p>-</p> | SNMP agent |
rupsBatteryTemperature.0<p>Update: 60s</p> |
Output source | <p>-</p> | SNMP agent |
rupsOutputSource.0<p>Update: 60s</p> |
System Temperature | <p>-</p> | SNMP agent |
rupsSystemTemperature.0<p>Update: 30s</p> |
Battery Current | <p>-</p> | SNMP agent |
rupsBatteryCurrent.0<p>Update: 60s</p> |
Agent availability | <p>The agent always returns 1 for this item. It could be used in combination with nodata() for availability check.</p> | Zabbix internal |
zabbix[host,snmp,available]<p>Update: 30s</p> |
Line {#SNMPINDEX} Input Current | <p>-</p> | SNMP agent |
rupsInputCurrent.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Input Frequency | <p>-</p> | SNMP agent |
rupsInputFrequency.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Input True Power | <p>-</p> | SNMP agent |
rupsInputTruePower.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Input Voltage | <p>-</p> | SNMP agent |
rupsInputVolage.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Bypass Current | <p>-</p> | SNMP agent |
rupsBypassCurrent[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Bypass Power | <p>-</p> | SNMP agent |
rupsBypassPower[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Bypass Voltage | <p>-</p> | SNMP agent |
rupsBypassVoltage[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Current | <p>-</p> | SNMP agent |
rupsOutputCurrent.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Peak Current | <p>-</p> | SNMP agent |
rupsOutputPeakCurrent.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output % Load | <p>-</p> | SNMP agent |
rupsOutputPercetLoad.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Power | <p>-</p> | SNMP agent |
rupsOutputPower.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Voltage | <p>-</p> | SNMP agent |
rupsOutputVoltage.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
Bypass voltage on line {#SNMPINDEX} below {$NOMINAL_VOLTAGE} | <p>-</p> | <p>Expression: max(/SNMP Riello UPS/rupsInputVolage.[{#SNMPINDEX}],#2)<(230*0.9)</p><p>Recovery expression: </p> | high |
Bypass voltage on line {#SNMPINDEX} below {$NOMINAL_VOLTAGE} (LLD) | <p>-</p> | <p>Expression: max(/SNMP Riello UPS/rupsInputVolage.[{#SNMPINDEX}],#2)<(230*0.9)</p><p>Recovery expression: </p> | high |
Basic Riello UPS Template no MIBs needed
I. Aliaga U.
Name | Description | Default | Type |
---|---|---|---|
{$NOMINAL_FREQUENCY} | <p>-</p> | 60 |
Text macro |
{$NOMINAL_VOLTAGE} | <p>-</p> | 230 |
Text macro |
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Input Lines | <p>-</p> | SNMP agent |
InputLinesD<p>Update: 30s</p> |
Bypass Lines | <p>-</p> | SNMP agent |
BypassLinesD<p>Update: 30s</p> |
Output Lines | <p>-</p> | SNMP agent |
OutputLinesD<p>Update: 30s</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Battery Status | <p>-</p> | SNMP agent |
rupsBatteryStatus.0<p>Update: 60s</p> |
Estimated Charge Remaining | <p>-</p> | SNMP agent |
rupsEstimatedChargeRemaining.0<p>Update: 60s</p> |
Software version | <p>-</p> | SNMP agent |
rupsIdentUPSSoftwareVersion.0<p>Update: 1d</p> |
Seconds on Battery | <p>-</p> | SNMP agent |
rupsSecondsOnBattery.0<p>Update: 60s</p> |
Battery Voltage | <p>-</p> | SNMP agent |
rupsBatteryVoltage.0<p>Update: 60s</p> |
Input Line Bads | <p>-</p> | SNMP agent |
rupsInputLineBads.0<p>Update: 60s</p> |
Model name | <p>-</p> | SNMP agent |
rupsIdentModel.0<p>Update: 1d</p> |
Bypass frequency | <p>-</p> | SNMP agent |
rupsBypassFrequency.0<p>Update: 60s</p> |
Estimated Minutes Remaining | <p>-</p> | SNMP agent |
rupsEstimatedMinutesRemaining.0<p>Update: 60s</p> |
Alarms Present | <p>-</p> | SNMP agent |
upsAlarmsPresent.0<p>Update: 60s</p> |
Ups Agent Version | <p>-</p> | SNMP agent |
rupsIdentAgentSoftwareVersion.0<p>Update: 1d</p> |
Output frequency | <p>-</p> | SNMP agent |
rupsOutputFrequency.0<p>Update: 60s</p> |
Battery Temperature | <p>-</p> | SNMP agent |
rupsBatteryTemperature.0<p>Update: 60s</p> |
Output source | <p>-</p> | SNMP agent |
rupsOutputSource.0<p>Update: 60s</p> |
System Temperature | <p>-</p> | SNMP agent |
rupsSystemTemperature.0<p>Update: 30s</p> |
Battery Current | <p>-</p> | SNMP agent |
rupsBatteryCurrent.0<p>Update: 60s</p> |
Agent availability | <p>The agent always returns 1 for this item. It could be used in combination with nodata() for availability check.</p> | Zabbix internal |
zabbix[host,snmp,available]<p>Update: 30s</p> |
Line {#SNMPINDEX} Input Current | <p>-</p> | SNMP agent |
rupsInputCurrent.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Input Frequency | <p>-</p> | SNMP agent |
rupsInputFrequency.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Input True Power | <p>-</p> | SNMP agent |
rupsInputTruePower.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Input Voltage | <p>-</p> | SNMP agent |
rupsInputVolage.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Bypass Current | <p>-</p> | SNMP agent |
rupsBypassCurrent[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Bypass Power | <p>-</p> | SNMP agent |
rupsBypassPower[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Bypass Voltage | <p>-</p> | SNMP agent |
rupsBypassVoltage[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Current | <p>-</p> | SNMP agent |
rupsOutputCurrent.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Peak Current | <p>-</p> | SNMP agent |
rupsOutputPeakCurrent.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output % Load | <p>-</p> | SNMP agent |
rupsOutputPercetLoad.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Power | <p>-</p> | SNMP agent |
rupsOutputPower.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Line {#SNMPINDEX} Output Voltage | <p>-</p> | SNMP agent |
rupsOutputVoltage.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
Bypass voltage on line {#SNMPINDEX} below {$NOMINAL_VOLTAGE} | <p>-</p> | <p>Expression: max(/SNMP Riello UPS/rupsInputVolage.[{#SNMPINDEX}],#2)<(230*0.9)</p><p>Recovery expression: </p> | high |
Bypass voltage on line {#SNMPINDEX} below {$NOMINAL_VOLTAGE} (LLD) | <p>-</p> | <p>Expression: max(/SNMP Riello UPS/rupsInputVolage.[{#SNMPINDEX}],#2)<(230*0.9)</p><p>Recovery expression: </p> | high |