Template made based on Phillip Hernandez template: https://share.zabbix.com/power-ups/apc/apc-ups
All OID’s were changed to match general MIB for UPS.
New graphs were also added.
21 Items
9 Triggers
7 Graphs
I also have a template made for three-phase UPSs, feel free to check: https://share.zabbix.com/power-ups/ups-templates/network-ups-three-phase-generic
Diogo Teixeira
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 60</p> |
| UPS battery capacity (%) | <p>-</p> | SNMP agent |
upsAdvBatteryCapacity<p>Update: 60</p> |
| UPS output voltage | <p>-</p> | SNMP agent |
upsAdvOutputVoltage<p>Update: 60</p> |
| UPS input current | <p>-</p> | SNMP agent |
upsAdvInputCurrent<p>Update: 60</p> |
| UPS run time remaining | <p>-</p> | SNMP agent |
upsAdvRunTimeRemaining<p>Update: 60</p> |
| UPS output current | <p>-</p> | SNMP agent |
upsAdvOutputCurrent<p>Update: 60</p> |
| Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 60</p> |
| Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 60</p> |
| UPS output load (%) | <p>-</p> | SNMP agent |
upsAdvOutputLoad<p>Update: 60</p> |
| UPS battery status | <p>-</p> | SNMP agent |
upsBasicBatteryStatus<p>Update: 60</p> |
| UPS output power | <p>-</p> | SNMP agent |
upsAdvOutputPower<p>Update: 60</p> |
| UPS input power | <p>-</p> | SNMP agent |
upsAdvInputPower<p>Update: 60</p> |
| Software version (full) | <p>-</p> | SNMP agent |
sysDescr<p>Update: 60</p> |
| UPS output frequency | <p>-</p> | SNMP agent |
upsAdvOutputFrequency<p>Update: 60</p> |
| UPS input voltage | <p>-</p> | SNMP agent |
upsAdvInputVoltage<p>Update: 60</p> |
| Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 60</p> |
| UPS time on battery | <p>-</p> | SNMP agent |
upsBasicBatteryTimeOnBattery<p>Update: 60</p> |
| UPS battery temperature | <p>-</p> | SNMP agent |
upsAdvBatteryTemperature<p>Update: 60</p> |
There are no triggers in this template.
Template made based on Phillip Hernandez template: https://share.zabbix.com/power-ups/apc/apc-ups
All OID’s were changed to match general MIB for UPS.
New graphs were also added.
21 Items
9 Triggers
7 Graphs
I also have a template made for three-phase UPSs, feel free to check: https://share.zabbix.com/power-ups/ups-templates/network-ups-three-phase-generic
Diogo Teixeira
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| UPS run time remaining | <p>-</p> | SNMP agent |
upsAdvRunTimeRemaining<p>Update: 60</p> |
| UPS input current | <p>-</p> | SNMP agent |
upsAdvInputCurrent<p>Update: 60</p> |
| UPS battery status | <p>-</p> | SNMP agent |
upsBasicBatteryStatus<p>Update: 60</p> |
| UPS output current | <p>-</p> | SNMP agent |
upsAdvOutputCurrent<p>Update: 60</p> |
| UPS time on battery | <p>-</p> | SNMP agent |
upsBasicBatteryTimeOnBattery<p>Update: 60</p> |
| UPS battery capacity (%) | <p>-</p> | SNMP agent |
upsAdvBatteryCapacity<p>Update: 60</p> |
| UPS output voltage | <p>-</p> | SNMP agent |
upsAdvOutputVoltage<p>Update: 60</p> |
| UPS output frequency | <p>-</p> | SNMP agent |
upsAdvOutputFrequency<p>Update: 60</p> |
| Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 60</p> |
| UPS input voltage | <p>-</p> | SNMP agent |
upsAdvInputVoltage<p>Update: 60</p> |
| Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 60</p> |
| Software version (full) | <p>-</p> | SNMP agent |
sysDescr<p>Update: 60</p> |
| UPS output load (%) | <p>-</p> | SNMP agent |
upsAdvOutputLoad<p>Update: 60</p> |
| Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 60</p> |
| UPS battery temperature | <p>-</p> | SNMP agent |
upsAdvBatteryTemperature<p>Update: 60</p> |
| Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 60</p> |
| UPS input power | <p>-</p> | SNMP agent |
upsAdvInputPower<p>Update: 60</p> |
| UPS output power | <p>-</p> | SNMP agent |
upsAdvOutputPower<p>Update: 60</p> |
There are no triggers in this template.
Template made based on Phillip Hernandez template: https://share.zabbix.com/power-ups/apc/apc-ups
All OID’s were changed to match general MIB for UPS.
New graphs were also added.
21 Items
9 Triggers
7 Graphs
I also have a template made for three-phase UPSs, feel free to check: https://share.zabbix.com/power-ups/ups-templates/network-ups-three-phase-generic
Diogo Teixeira
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| UPS run time remaining | <p>-</p> | SNMP agent |
upsAdvRunTimeRemaining<p>Update: 60</p> |
| UPS input current | <p>-</p> | SNMP agent |
upsAdvInputCurrent<p>Update: 60</p> |
| UPS battery status | <p>-</p> | SNMP agent |
upsBasicBatteryStatus<p>Update: 60</p> |
| UPS output current | <p>-</p> | SNMP agent |
upsAdvOutputCurrent<p>Update: 60</p> |
| UPS time on battery | <p>-</p> | SNMP agent |
upsBasicBatteryTimeOnBattery<p>Update: 60</p> |
| UPS battery capacity (%) | <p>-</p> | SNMP agent |
upsAdvBatteryCapacity<p>Update: 60</p> |
| UPS output voltage | <p>-</p> | SNMP agent |
upsAdvOutputVoltage<p>Update: 60</p> |
| UPS output frequency | <p>-</p> | SNMP agent |
upsAdvOutputFrequency<p>Update: 60</p> |
| Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 60</p> |
| UPS input voltage | <p>-</p> | SNMP agent |
upsAdvInputVoltage<p>Update: 60</p> |
| Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 60</p> |
| Software version (full) | <p>-</p> | SNMP agent |
sysDescr<p>Update: 60</p> |
| UPS output load (%) | <p>-</p> | SNMP agent |
upsAdvOutputLoad<p>Update: 60</p> |
| Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 60</p> |
| UPS battery temperature | <p>-</p> | SNMP agent |
upsAdvBatteryTemperature<p>Update: 60</p> |
| Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 60</p> |
| UPS input power | <p>-</p> | SNMP agent |
upsAdvInputPower<p>Update: 60</p> |
| UPS output power | <p>-</p> | SNMP agent |
upsAdvOutputPower<p>Update: 60</p> |
There are no triggers in this template.