Available versions




HP R5000 SNMP

Description

HP R5000 UPS SNMP Made bu Ennio

Overview

Monitor power parametrs: frequency, power, voltage, current, temp. Full control for Input, Output (Segment), Battery, Bypass. I used CPQPOWER1.76.MIB and UPS-MIB.mib

Author

Ennio

Macros used

Name Description Default Type
{$SNMP_COMMUNITY} <p>-</p> `` Text macro

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
Output Current <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.4.1.3.1<p>Update: 30s</p>
Software Version <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.1.3.0<p>Update: 1d</p>
Output Load <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.1.0<p>Update: 30s</p>
Test Start Time <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.7.5.0<p>Update: 30s</p>
S/N <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.2.7.0<p>Update: 1d</p>
Ambient Temperature <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.6.1.0<p>Update: 1m</p>
Segment #2 <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.10.2.1.2.2<p>Update: 30s</p>
Battery Capacity <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.4.0<p>Update: 30s</p>
Model <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.1.5.0<p>Update: 1d</p>
Battery Status <p>Gives the status of the Advanced Battery Management; batteryFloating(3) status means that the charger is temporarily charging the battery to its float voltage; batteryResting(4) is the state when the battery is fully charged and none of the other actions (charging/discharging/floating) is being done.</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.5.0<p>Update: 30s</p>
Alarm Present <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.6.1.0<p>Update: 30s</p>
Running On Battery <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.2.2.0<p>Update: 30s</p>
Bypass Power <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.5.3.1.4.1<p>Update: 30s</p>
Battery Test Status <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.7.2.0<p>Update: 1m</p>
Input Line Bads <p>The number of times the Input was out of tolerance in voltage or frequency.</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.2.0<p>Update: 30s</p>
Input Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.4.1.2.1<p>Update: 30s</p>
Input Current <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.4.1.3.1<p>Update: 30s</p>
Output Source <p>The present source of output power. The enumeration none(2) indicates that there is no source of output power (and therefore no output power), for example, the system has opened the output breaker.</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.5.0<p>Update: 30s</p>
Bypass Frequency <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.5.1.0<p>Update: 30s</p>
Bypass Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.5.3.1.2.1<p>Update: 30s</p>
Battery Current <p>Battery Current as reported by the UPS metering. Current is positive when discharging, negative when recharging the battery.</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.3.0<p>Update: 30s</p>
Battery Temperature <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.2.7.0<p>Update: 1m</p>
Remaining Backup Time <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.1.0<p>Update: 30s</p>
Output Power <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.4.1.4.1<p>Update: 30s</p>
MAC <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.2.8.0<p>Update: 1d</p>
P/N <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.2.6.0<p>Update: 1d</p>
System Uptime <p>-</p> SNMP agent .1.3.6.1.2.1.1.3.0<p>Update: 1m</p>
Battery Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.2.0<p>Update: 30s</p>
Output Frequency <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.2.0<p>Update: 30s</p>
Bypass Current <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.5.3.1.3.1<p>Update: 30s</p>
Input Frequency <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.1.0<p>Update: 30s</p>
Output Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.4.1.2.1<p>Update: 30s</p>
Segment #1 <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.10.2.1.2.1<p>Update: 30s</p>

Triggers

There are no triggers in this template.

HP R5000 SNMP

Description

HP R5000 UPS SNMP Made bu Ennio

Overview

Monitor power parametrs: frequency, power, voltage, current, temp. Full control for Input, Output (Segment), Battery, Bypass. I used CPQPOWER1.76.MIB and UPS-MIB.mib

Author

Ennio

Macros used

Name Description Default Type
{$SNMP_COMMUNITY} <p>-</p> `` Text macro

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
Battery Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.2.0<p>Update: 30s</p>
Input Frequency <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.1.0<p>Update: 30s</p>
Remaining Backup Time <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.1.0<p>Update: 30s</p>
Test Start Time <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.7.5.0<p>Update: 30s</p>
Battery Test Status <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.7.2.0<p>Update: 1m</p>
Bypass Power <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.5.3.1.4.1<p>Update: 30s</p>
Input Current <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.4.1.3.1<p>Update: 30s</p>
Segment #1 <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.10.2.1.2.1<p>Update: 30s</p>
System Uptime <p>-</p> SNMP agent .1.3.6.1.2.1.1.3.0<p>Update: 1m</p>
Battery Status <p>Gives the status of the Advanced Battery Management; batteryFloating(3) status means that the charger is temporarily charging the battery to its float voltage; batteryResting(4) is the state when the battery is fully charged and none of the other actions (charging/discharging/floating) is being done.</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.5.0<p>Update: 30s</p>
Input Line Bads <p>The number of times the Input was out of tolerance in voltage or frequency.</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.2.0<p>Update: 30s</p>
Alarm Present <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.6.1.0<p>Update: 30s</p>
Bypass Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.5.3.1.2.1<p>Update: 30s</p>
Bypass Current <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.5.3.1.3.1<p>Update: 30s</p>
Output Frequency <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.2.0<p>Update: 30s</p>
P/N <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.2.6.0<p>Update: 1d</p>
Bypass Frequency <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.5.1.0<p>Update: 30s</p>
Output Load <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.1.0<p>Update: 30s</p>
Segment #2 <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.10.2.1.2.2<p>Update: 30s</p>
Input Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.4.1.2.1<p>Update: 30s</p>
Output Current <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.4.1.3.1<p>Update: 30s</p>
Battery Current <p>Battery Current as reported by the UPS metering. Current is positive when discharging, negative when recharging the battery.</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.3.0<p>Update: 30s</p>
Software Version <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.1.3.0<p>Update: 1d</p>
Battery Capacity <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.4.0<p>Update: 30s</p>
Output Power <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.4.1.4.1<p>Update: 30s</p>
Battery Temperature <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.2.7.0<p>Update: 1m</p>
MAC <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.2.8.0<p>Update: 1d</p>
Output Source <p>The present source of output power. The enumeration none(2) indicates that there is no source of output power (and therefore no output power), for example, the system has opened the output breaker.</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.5.0<p>Update: 30s</p>
Model <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.1.5.0<p>Update: 1d</p>
Output Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.4.1.2.1<p>Update: 30s</p>
S/N <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.2.7.0<p>Update: 1d</p>
Ambient Temperature <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.6.1.0<p>Update: 1m</p>
Running On Battery <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.2.2.0<p>Update: 30s</p>

Triggers

There are no triggers in this template.

HP R5000 SNMP

Description

HP R5000 UPS SNMP Made bu Ennio

Overview

Monitor power parametrs: frequency, power, voltage, current, temp. Full control for Input, Output (Segment), Battery, Bypass. I used CPQPOWER1.76.MIB and UPS-MIB.mib

Author

Ennio

Macros used

Name Description Default Type
{$SNMP_COMMUNITY} <p>-</p> `` Text macro

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
Battery Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.2.0<p>Update: 30s</p>
Input Frequency <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.1.0<p>Update: 30s</p>
Remaining Backup Time <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.1.0<p>Update: 30s</p>
Test Start Time <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.7.5.0<p>Update: 30s</p>
Battery Test Status <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.7.2.0<p>Update: 1m</p>
Bypass Power <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.5.3.1.4.1<p>Update: 30s</p>
Input Current <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.4.1.3.1<p>Update: 30s</p>
Segment #1 <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.10.2.1.2.1<p>Update: 30s</p>
System Uptime <p>-</p> SNMP agent .1.3.6.1.2.1.1.3.0<p>Update: 1m</p>
Battery Status <p>Gives the status of the Advanced Battery Management; batteryFloating(3) status means that the charger is temporarily charging the battery to its float voltage; batteryResting(4) is the state when the battery is fully charged and none of the other actions (charging/discharging/floating) is being done.</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.5.0<p>Update: 30s</p>
Input Line Bads <p>The number of times the Input was out of tolerance in voltage or frequency.</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.2.0<p>Update: 30s</p>
Alarm Present <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.6.1.0<p>Update: 30s</p>
Bypass Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.5.3.1.2.1<p>Update: 30s</p>
Bypass Current <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.5.3.1.3.1<p>Update: 30s</p>
Output Frequency <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.2.0<p>Update: 30s</p>
P/N <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.2.6.0<p>Update: 1d</p>
Bypass Frequency <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.5.1.0<p>Update: 30s</p>
Output Load <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.1.0<p>Update: 30s</p>
Segment #2 <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.10.2.1.2.2<p>Update: 30s</p>
Input Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.3.4.1.2.1<p>Update: 30s</p>
Output Current <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.4.1.3.1<p>Update: 30s</p>
Battery Current <p>Battery Current as reported by the UPS metering. Current is positive when discharging, negative when recharging the battery.</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.3.0<p>Update: 30s</p>
Software Version <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.1.3.0<p>Update: 1d</p>
Battery Capacity <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.2.4.0<p>Update: 30s</p>
Output Power <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.4.1.4.1<p>Update: 30s</p>
Battery Temperature <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.2.7.0<p>Update: 1m</p>
MAC <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.2.8.0<p>Update: 1d</p>
Output Source <p>The present source of output power. The enumeration none(2) indicates that there is no source of output power (and therefore no output power), for example, the system has opened the output breaker.</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.5.0<p>Update: 30s</p>
Model <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.1.5.0<p>Update: 1d</p>
Output Voltage <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.4.4.1.2.1<p>Update: 30s</p>
S/N <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.1.2.7.0<p>Update: 1d</p>
Ambient Temperature <p>-</p> SNMP agent .1.3.6.1.4.1.232.165.3.6.1.0<p>Update: 1m</p>
Running On Battery <p>-</p> SNMP agent .1.3.6.1.2.1.33.1.2.2.0<p>Update: 30s</p>

Triggers

There are no triggers in this template.