Simple SNMPv1 template for Delta UPS with LLD for lines.
Tested on Zabbix 3.0 but should works on older versions.
Required extra configuration:
Macro for {$SNMP_COMMUNITY}
UPS-MIB
sim
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS Bypass Line Discovery | <p>-</p> | SNMP agent |
UPSBypassLineDiscovery<p>Update: 7200</p> |
UPS Input Line Discovery | <p>-</p> | SNMP agent |
UPSInputLineDiscovery<p>Update: 7200</p> |
UPS Output Line Discovery | <p>-</p> | SNMP agent |
UPSOutputLineDiscovery<p>Update: 7200</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Config Output V-A | <p>-</p> | SNMP agent |
upsConfigOutputVA<p>Update: 60</p> |
UPS Manufacturer | <p>-</p> | SNMP agent |
upsIdentManufacturer<p>Update: 7200</p> |
UPS Name | <p>-</p> | SNMP agent |
sysName<p>Update: 7200</p> |
Battery Current Amp DC | <p>-</p> | SNMP agent |
upsBatteryCurrent<p>Update: 60</p> |
Number of Bypass Lines | <p>-</p> | SNMP agent |
upsBypassNumLines<p>Update: 7200</p> |
UPS Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 7200</p> |
UPS Device uptime | <p>The time since the network management portion of the system was last re-initialized.</p> | SNMP agent |
sysUpTime.2<p>Update: 60</p> |
UPS Battery Voltage | <p>-</p> | SNMP agent |
upsBatteryVoltage<p>Update: 60</p> |
ICMP loss | <p>-</p> | Simple check |
icmppingloss<p>Update: 60</p> |
Config Input Frequency | <p>-</p> | SNMP agent |
upsConfigInputFreq<p>Update: 60</p> |
ICMP ping | <p>-</p> | Simple check |
icmpping<p>Update: 60</p> |
Config Input Voltage | <p>-</p> | SNMP agent |
upsConfigInputVoltage<p>Update: 60</p> |
Config Output Frequency | <p>-</p> | SNMP agent |
upsConfigOutputFreq<p>Update: 60</p> |
Number of Output Lines | <p>-</p> | SNMP agent |
upsOutputNumLines<p>Update: 7200</p> |
ICMP response time | <p>-</p> | Simple check |
icmppingsec<p>Update: 60</p> |
UPS Model | <p>-</p> | SNMP agent |
upsIdentModel<p>Update: 7200</p> |
Battery Charge Level in % | <p>-</p> | SNMP agent |
upsEstimatedChargeRemaining<p>Update: 30</p> |
UPS Battery Status | <p>unknown(1), batteryNormal(2), batteryLow(3), batteryDepleted(4)</p> | SNMP agent |
upsBatteryStatus<p>Update: 60</p> |
Number of Input Lines | <p>-</p> | SNMP agent |
upsInputNumLines<p>Update: 7200</p> |
Config Output Voltage | <p>-</p> | SNMP agent |
upsConfigOutputVoltage<p>Update: 60</p> |
UPS Source Type | <p>other(1), none(2), normal(3), bypass(4), battery(5), booster(6), reducer(7)</p> | SNMP agent |
upsOutputSource<p>Update: 30</p> |
UPS Line {#SNMPINDEX} Bypass Voltage | <p>-</p> | SNMP agent |
upsBypassVoltage.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Input {#SNMPINDEX} Current | <p>-</p> | SNMP agent |
upsInputCurrent.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Input {#SNMPINDEX} Frequency | <p>-</p> | SNMP agent |
upsInputFrequency.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Input {#SNMPINDEX} Voltage | <p>-</p> | SNMP agent |
upsInputVoltage.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Output Voltage | <p>-</p> | SNMP agent |
upsOutputCurrent.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Output Percent Load | <p>-</p> | SNMP agent |
upsOutputPercentLoad.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Output Power | <p>-</p> | SNMP agent |
upsOutputPower.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Output Current | <p>-</p> | SNMP agent |
upsOutputVoltage.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 60% | <p>-</p> | <p>Expression: {Delta UPS SNMP v1:upsOutputPercentLoad.[{#SNMPVALUE}].avg(5m)}>60</p><p>Recovery expression: </p> | average |
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 80% | <p>-</p> | <p>Expression: {Delta UPS SNMP v1:upsOutputPercentLoad.[{#SNMPVALUE}].avg(5m)}>80</p><p>Recovery expression: </p> | high |
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 60% (LLD) | <p>-</p> | <p>Expression: {Delta UPS SNMP v1:upsOutputPercentLoad.[{#SNMPVALUE}].avg(5m)}>60</p><p>Recovery expression: </p> | average |
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 80% (LLD) | <p>-</p> | <p>Expression: {Delta UPS SNMP v1:upsOutputPercentLoad.[{#SNMPVALUE}].avg(5m)}>80</p><p>Recovery expression: </p> | high |
Simple SNMPv1 template for Delta UPS with LLD for lines.
Tested on Zabbix 3.0 but should works on older versions.
Required extra configuration:
Macro for {$SNMP_COMMUNITY}
UPS-MIB
sim
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS Output Line Discovery | <p>-</p> | SNMP agent |
UPSOutputLineDiscovery<p>Update: 7200</p> |
UPS Input Line Discovery | <p>-</p> | SNMP agent |
UPSInputLineDiscovery<p>Update: 7200</p> |
UPS Bypass Line Discovery | <p>-</p> | SNMP agent |
UPSBypassLineDiscovery<p>Update: 7200</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS Model | <p>-</p> | SNMP agent |
upsIdentModel<p>Update: 7200</p> |
Config Output Frequency | <p>-</p> | SNMP agent |
upsConfigOutputFreq<p>Update: 60</p> |
UPS Source Type | <p>other(1), none(2), normal(3), bypass(4), battery(5), booster(6), reducer(7)</p> | SNMP agent |
upsOutputSource<p>Update: 30</p> |
Config Input Frequency | <p>-</p> | SNMP agent |
upsConfigInputFreq<p>Update: 60</p> |
Number of Bypass Lines | <p>-</p> | SNMP agent |
upsBypassNumLines<p>Update: 7200</p> |
Config Output Voltage | <p>-</p> | SNMP agent |
upsConfigOutputVoltage<p>Update: 60</p> |
ICMP loss | <p>-</p> | Simple check |
icmppingloss<p>Update: 60</p> |
ICMP ping | <p>-</p> | Simple check |
icmpping<p>Update: 60</p> |
Number of Output Lines | <p>-</p> | SNMP agent |
upsOutputNumLines<p>Update: 7200</p> |
UPS Device uptime | <p>The time since the network management portion of the system was last re-initialized.</p> | SNMP agent |
sysUpTime.2<p>Update: 60</p> |
Battery Current Amp DC | <p>-</p> | SNMP agent |
upsBatteryCurrent<p>Update: 60</p> |
Config Output V-A | <p>-</p> | SNMP agent |
upsConfigOutputVA<p>Update: 60</p> |
UPS Battery Voltage | <p>-</p> | SNMP agent |
upsBatteryVoltage<p>Update: 60</p> |
UPS Battery Status | <p>unknown(1), batteryNormal(2), batteryLow(3), batteryDepleted(4)</p> | SNMP agent |
upsBatteryStatus<p>Update: 60</p> |
UPS Manufacturer | <p>-</p> | SNMP agent |
upsIdentManufacturer<p>Update: 7200</p> |
UPS Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 7200</p> |
Config Input Voltage | <p>-</p> | SNMP agent |
upsConfigInputVoltage<p>Update: 60</p> |
Battery Charge Level in % | <p>-</p> | SNMP agent |
upsEstimatedChargeRemaining<p>Update: 30</p> |
Number of Input Lines | <p>-</p> | SNMP agent |
upsInputNumLines<p>Update: 7200</p> |
ICMP response time | <p>-</p> | Simple check |
icmppingsec<p>Update: 60</p> |
UPS Name | <p>-</p> | SNMP agent |
sysName<p>Update: 7200</p> |
UPS Line {#SNMPINDEX} Output Voltage | <p>-</p> | SNMP agent |
upsOutputCurrent.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Output Percent Load | <p>-</p> | SNMP agent |
upsOutputPercentLoad.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Output Power | <p>-</p> | SNMP agent |
upsOutputPower.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Output Current | <p>-</p> | SNMP agent |
upsOutputVoltage.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Input {#SNMPINDEX} Current | <p>-</p> | SNMP agent |
upsInputCurrent.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Input {#SNMPINDEX} Frequency | <p>-</p> | SNMP agent |
upsInputFrequency.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Input {#SNMPINDEX} Voltage | <p>-</p> | SNMP agent |
upsInputVoltage.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Bypass Voltage | <p>-</p> | SNMP agent |
upsBypassVoltage.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 60% | <p>-</p> | <p>Expression: avg(/Delta UPS SNMP v1/upsOutputPercentLoad.[{#SNMPVALUE}],5m)>60</p><p>Recovery expression: </p> | average |
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 80% | <p>-</p> | <p>Expression: avg(/Delta UPS SNMP v1/upsOutputPercentLoad.[{#SNMPVALUE}],5m)>80</p><p>Recovery expression: </p> | high |
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 60% (LLD) | <p>-</p> | <p>Expression: avg(/Delta UPS SNMP v1/upsOutputPercentLoad.[{#SNMPVALUE}],5m)>60</p><p>Recovery expression: </p> | average |
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 80% (LLD) | <p>-</p> | <p>Expression: avg(/Delta UPS SNMP v1/upsOutputPercentLoad.[{#SNMPVALUE}],5m)>80</p><p>Recovery expression: </p> | high |
Simple SNMPv1 template for Delta UPS with LLD for lines.
Tested on Zabbix 3.0 but should works on older versions.
Required extra configuration:
Macro for {$SNMP_COMMUNITY}
UPS-MIB
sim
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS Output Line Discovery | <p>-</p> | SNMP agent |
UPSOutputLineDiscovery<p>Update: 7200</p> |
UPS Input Line Discovery | <p>-</p> | SNMP agent |
UPSInputLineDiscovery<p>Update: 7200</p> |
UPS Bypass Line Discovery | <p>-</p> | SNMP agent |
UPSBypassLineDiscovery<p>Update: 7200</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS Model | <p>-</p> | SNMP agent |
upsIdentModel<p>Update: 7200</p> |
Config Output Frequency | <p>-</p> | SNMP agent |
upsConfigOutputFreq<p>Update: 60</p> |
UPS Source Type | <p>other(1), none(2), normal(3), bypass(4), battery(5), booster(6), reducer(7)</p> | SNMP agent |
upsOutputSource<p>Update: 30</p> |
Config Input Frequency | <p>-</p> | SNMP agent |
upsConfigInputFreq<p>Update: 60</p> |
Number of Bypass Lines | <p>-</p> | SNMP agent |
upsBypassNumLines<p>Update: 7200</p> |
Config Output Voltage | <p>-</p> | SNMP agent |
upsConfigOutputVoltage<p>Update: 60</p> |
ICMP loss | <p>-</p> | Simple check |
icmppingloss<p>Update: 60</p> |
ICMP ping | <p>-</p> | Simple check |
icmpping<p>Update: 60</p> |
Number of Output Lines | <p>-</p> | SNMP agent |
upsOutputNumLines<p>Update: 7200</p> |
UPS Device uptime | <p>The time since the network management portion of the system was last re-initialized.</p> | SNMP agent |
sysUpTime.2<p>Update: 60</p> |
Battery Current Amp DC | <p>-</p> | SNMP agent |
upsBatteryCurrent<p>Update: 60</p> |
Config Output V-A | <p>-</p> | SNMP agent |
upsConfigOutputVA<p>Update: 60</p> |
UPS Battery Voltage | <p>-</p> | SNMP agent |
upsBatteryVoltage<p>Update: 60</p> |
UPS Battery Status | <p>unknown(1), batteryNormal(2), batteryLow(3), batteryDepleted(4)</p> | SNMP agent |
upsBatteryStatus<p>Update: 60</p> |
UPS Manufacturer | <p>-</p> | SNMP agent |
upsIdentManufacturer<p>Update: 7200</p> |
UPS Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 7200</p> |
Config Input Voltage | <p>-</p> | SNMP agent |
upsConfigInputVoltage<p>Update: 60</p> |
Battery Charge Level in % | <p>-</p> | SNMP agent |
upsEstimatedChargeRemaining<p>Update: 30</p> |
Number of Input Lines | <p>-</p> | SNMP agent |
upsInputNumLines<p>Update: 7200</p> |
ICMP response time | <p>-</p> | Simple check |
icmppingsec<p>Update: 60</p> |
UPS Name | <p>-</p> | SNMP agent |
sysName<p>Update: 7200</p> |
UPS Line {#SNMPINDEX} Output Voltage | <p>-</p> | SNMP agent |
upsOutputCurrent.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Output Percent Load | <p>-</p> | SNMP agent |
upsOutputPercentLoad.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Output Power | <p>-</p> | SNMP agent |
upsOutputPower.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Output Current | <p>-</p> | SNMP agent |
upsOutputVoltage.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Input {#SNMPINDEX} Current | <p>-</p> | SNMP agent |
upsInputCurrent.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Input {#SNMPINDEX} Frequency | <p>-</p> | SNMP agent |
upsInputFrequency.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Input {#SNMPINDEX} Voltage | <p>-</p> | SNMP agent |
upsInputVoltage.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
UPS Line {#SNMPINDEX} Bypass Voltage | <p>-</p> | SNMP agent |
upsBypassVoltage.[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 60% | <p>-</p> | <p>Expression: avg(/Delta UPS SNMP v1/upsOutputPercentLoad.[{#SNMPVALUE}],5m)>60</p><p>Recovery expression: </p> | average |
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 80% | <p>-</p> | <p>Expression: avg(/Delta UPS SNMP v1/upsOutputPercentLoad.[{#SNMPVALUE}],5m)>80</p><p>Recovery expression: </p> | high |
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 60% (LLD) | <p>-</p> | <p>Expression: avg(/Delta UPS SNMP v1/upsOutputPercentLoad.[{#SNMPVALUE}],5m)>60</p><p>Recovery expression: </p> | average |
{HOST.NAME}: Line {#SNMPINDEX} load is greater than > 80% (LLD) | <p>-</p> | <p>Expression: avg(/Delta UPS SNMP v1/upsOutputPercentLoad.[{#SNMPVALUE}],5m)>80</p><p>Recovery expression: </p> | high |