I didn’t see any templates for Cyberpower UPS systems so I made a quick and simple one.
Hope this can help someone else!
Adam Loghides
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS-PowerRating | <p>-</p> | SNMP agent |
UPS-PowerRating<p>Update: 12h</p> |
UPS-Model | <p>-</p> | SNMP agent |
UPS-Model<p>Update: 12h</p> |
UPS-Temperature | <p>1.3.6.1.4.1.3808.1.1.1.2.2.3.0</p> | SNMP agent |
UPS-TemperatureLevel<p>Update: 30s</p> |
UPS-TemperatureLevelF | <p>-</p> | Calculated |
UPS-TemperatureLevelF<p>Update: 30s</p> |
UPS-SerialNumber | <p>-</p> | SNMP agent |
UPS-SerialNumber<p>Update: 12h</p> |
UPS-BatteryVoltage | <p>-</p> | SNMP agent |
UPS-BatteryVoltage<p>Update: 30s</p> |
UPS-FirmwareRevision | <p>-</p> | SNMP agent |
UPS-FirmwareRevision<p>Update: 12h</p> |
UPS-OutputPower | <p>-</p> | SNMP agent |
UPS-OutputPower<p>Update: 60s</p> |
UPS-DateLastReplacedBattery | <p>-</p> | SNMP agent |
UPS-DateLastReplaced<p>Update: 30s</p> |
UPS-InputStatus | <p>1 ⇒ normal 2 ⇒ overVoltage 3 ⇒ underVoltage 4 ⇒ frequencyFailure 5 ⇒ blackout</p> | SNMP agent |
UPS-InputStatus<p>Update: 30s</p> |
UPS-BatteryLevelPercent | <p>-</p> | SNMP agent |
UPS-BatteryLevelPercent<p>Update: 30s</p> |
UPS-LoadPower | <p>-</p> | SNMP agent |
UPS-LoadPower<p>Update: 12h</p> |
UPS-InputVoltage | <p>-</p> | SNMP agent |
UPS-InputVoltage<p>Update: 30s</p> |
UPS-OutputWorkingFreq | <p>-</p> | SNMP agent |
UPS-OutputWorkingFreq<p>Update: 60s</p> |
UPS-OutputFrequency | <p>-</p> | SNMP agent |
UPS-OutputFrequency<p>Update: 60s</p> |
UPS-BatteryMinutesRemaining | <p>-</p> | SNMP agent |
UPS-BatteryMinutesRemaining<p>Update: 30s</p> |
UPS-OutputLoad | <p>-</p> | SNMP agent |
UPS-OutputLoad<p>Update: 30s</p> |
UPS-OutputVoltage | <p>-</p> | SNMP agent |
UPS-OutputVoltage<p>Update: 60s</p> |
UPS-InputFrequency | <p>-</p> | SNMP agent |
UPS-InputFrequency<p>Update: 30s</p> |
UPS-OutputStatus | <p>1 ⇒ unknown 2 ⇒ onLine 3 ⇒ onBattery 4 ⇒ onBoost 5 ⇒ onSleep 6 ⇒ off 7 ⇒ rebooting</p> | SNMP agent |
UPS-OutputStatus<p>Update: 60s</p> |
UPS-OutputCurrent | <p>-</p> | SNMP agent |
UPS-OutputCurrent<p>Update: 60s</p> |
UPS-CurrentRating | <p>-</p> | SNMP agent |
UPS-CurrentRating<p>Update: 12h</p> |
UPS-FailCause | <p>DESCRIPTION “The reason of UPS power failure. This value is set to: - noTransfer(1), if UPS is in utility mode. - highLineVoltage(2), if UPS switch to battery mode by reason of input voltage over the high transfer vloltage. - brownout(3), if UPS switch to battery mode by reason of input voltage under the low transfer vloltage. - selfTest(4), if the UPS was commanded to do a self test.”</p> | SNMP agent |
UPS-FailCause<p>Update: 30s</p> |
UPS-Name | <p>-</p> | SNMP agent |
UPS-Name<p>Update: 12h</p> |
UPS-TimeOnBattery | <p>-</p> | SNMP agent |
UPS-TimeOnBattery<p>Update: 30s</p> |
UPS-BatteryReplaceStatus | <p>-</p> | SNMP agent |
UPS-BatteryReplaceStatus<p>Update: 30s</p> |
There are no triggers in this template.
I didn’t see any templates for Cyberpower UPS systems so I made a quick and simple one.
Hope this can help someone else!
Adam Loghides
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS-Name | <p>-</p> | SNMP agent |
UPS-Name<p>Update: 12h</p> |
UPS-OutputPower | <p>-</p> | SNMP agent |
UPS-OutputPower<p>Update: 60s</p> |
UPS-SerialNumber | <p>-</p> | SNMP agent |
UPS-SerialNumber<p>Update: 12h</p> |
UPS-BatteryLevelPercent | <p>-</p> | SNMP agent |
UPS-BatteryLevelPercent<p>Update: 30s</p> |
UPS-PowerRating | <p>-</p> | SNMP agent |
UPS-PowerRating<p>Update: 12h</p> |
UPS-OutputStatus | <p>1 ⇒ unknown 2 ⇒ onLine 3 ⇒ onBattery 4 ⇒ onBoost 5 ⇒ onSleep 6 ⇒ off 7 ⇒ rebooting</p> | SNMP agent |
UPS-OutputStatus<p>Update: 60s</p> |
UPS-OutputLoad | <p>-</p> | SNMP agent |
UPS-OutputLoad<p>Update: 30s</p> |
UPS-OutputFrequency | <p>-</p> | SNMP agent |
UPS-OutputFrequency<p>Update: 60s</p> |
UPS-OutputVoltage | <p>-</p> | SNMP agent |
UPS-OutputVoltage<p>Update: 60s</p> |
UPS-OutputCurrent | <p>-</p> | SNMP agent |
UPS-OutputCurrent<p>Update: 60s</p> |
UPS-CurrentRating | <p>-</p> | SNMP agent |
UPS-CurrentRating<p>Update: 12h</p> |
UPS-TimeOnBattery | <p>-</p> | SNMP agent |
UPS-TimeOnBattery<p>Update: 30s</p> |
UPS-InputVoltage | <p>-</p> | SNMP agent |
UPS-InputVoltage<p>Update: 30s</p> |
UPS-OutputWorkingFreq | <p>-</p> | SNMP agent |
UPS-OutputWorkingFreq<p>Update: 60s</p> |
UPS-BatteryVoltage | <p>-</p> | SNMP agent |
UPS-BatteryVoltage<p>Update: 30s</p> |
UPS-FailCause | <p>DESCRIPTION “The reason of UPS power failure. This value is set to: - noTransfer(1), if UPS is in utility mode. - highLineVoltage(2), if UPS switch to battery mode by reason of input voltage over the high transfer vloltage. - brownout(3), if UPS switch to battery mode by reason of input voltage under the low transfer vloltage. - selfTest(4), if the UPS was commanded to do a self test.”</p> | SNMP agent |
UPS-FailCause<p>Update: 30s</p> |
UPS-TemperatureLevelF | <p>-</p> | Calculated |
UPS-TemperatureLevelF<p>Update: 30s</p> |
UPS-Model | <p>-</p> | SNMP agent |
UPS-Model<p>Update: 12h</p> |
UPS-Temperature | <p>1.3.6.1.4.1.3808.1.1.1.2.2.3.0</p> | SNMP agent |
UPS-TemperatureLevel<p>Update: 30s</p> |
UPS-InputFrequency | <p>-</p> | SNMP agent |
UPS-InputFrequency<p>Update: 30s</p> |
UPS-FirmwareRevision | <p>-</p> | SNMP agent |
UPS-FirmwareRevision<p>Update: 12h</p> |
UPS-BatteryMinutesRemaining | <p>-</p> | SNMP agent |
UPS-BatteryMinutesRemaining<p>Update: 30s</p> |
UPS-DateLastReplacedBattery | <p>-</p> | SNMP agent |
UPS-DateLastReplaced<p>Update: 30s</p> |
UPS-BatteryReplaceStatus | <p>-</p> | SNMP agent |
UPS-BatteryReplaceStatus<p>Update: 30s</p> |
UPS-LoadPower | <p>-</p> | SNMP agent |
UPS-LoadPower<p>Update: 12h</p> |
UPS-InputStatus | <p>1 ⇒ normal 2 ⇒ overVoltage 3 ⇒ underVoltage 4 ⇒ frequencyFailure 5 ⇒ blackout</p> | SNMP agent |
UPS-InputStatus<p>Update: 30s</p> |
There are no triggers in this template.
I didn’t see any templates for Cyberpower UPS systems so I made a quick and simple one.
Hope this can help someone else!
Adam Loghides
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS-Name | <p>-</p> | SNMP agent |
UPS-Name<p>Update: 12h</p> |
UPS-OutputPower | <p>-</p> | SNMP agent |
UPS-OutputPower<p>Update: 60s</p> |
UPS-SerialNumber | <p>-</p> | SNMP agent |
UPS-SerialNumber<p>Update: 12h</p> |
UPS-BatteryLevelPercent | <p>-</p> | SNMP agent |
UPS-BatteryLevelPercent<p>Update: 30s</p> |
UPS-PowerRating | <p>-</p> | SNMP agent |
UPS-PowerRating<p>Update: 12h</p> |
UPS-OutputStatus | <p>1 ⇒ unknown 2 ⇒ onLine 3 ⇒ onBattery 4 ⇒ onBoost 5 ⇒ onSleep 6 ⇒ off 7 ⇒ rebooting</p> | SNMP agent |
UPS-OutputStatus<p>Update: 60s</p> |
UPS-OutputLoad | <p>-</p> | SNMP agent |
UPS-OutputLoad<p>Update: 30s</p> |
UPS-OutputFrequency | <p>-</p> | SNMP agent |
UPS-OutputFrequency<p>Update: 60s</p> |
UPS-OutputVoltage | <p>-</p> | SNMP agent |
UPS-OutputVoltage<p>Update: 60s</p> |
UPS-OutputCurrent | <p>-</p> | SNMP agent |
UPS-OutputCurrent<p>Update: 60s</p> |
UPS-CurrentRating | <p>-</p> | SNMP agent |
UPS-CurrentRating<p>Update: 12h</p> |
UPS-TimeOnBattery | <p>-</p> | SNMP agent |
UPS-TimeOnBattery<p>Update: 30s</p> |
UPS-InputVoltage | <p>-</p> | SNMP agent |
UPS-InputVoltage<p>Update: 30s</p> |
UPS-OutputWorkingFreq | <p>-</p> | SNMP agent |
UPS-OutputWorkingFreq<p>Update: 60s</p> |
UPS-BatteryVoltage | <p>-</p> | SNMP agent |
UPS-BatteryVoltage<p>Update: 30s</p> |
UPS-FailCause | <p>DESCRIPTION “The reason of UPS power failure. This value is set to: - noTransfer(1), if UPS is in utility mode. - highLineVoltage(2), if UPS switch to battery mode by reason of input voltage over the high transfer vloltage. - brownout(3), if UPS switch to battery mode by reason of input voltage under the low transfer vloltage. - selfTest(4), if the UPS was commanded to do a self test.”</p> | SNMP agent |
UPS-FailCause<p>Update: 30s</p> |
UPS-TemperatureLevelF | <p>-</p> | Calculated |
UPS-TemperatureLevelF<p>Update: 30s</p> |
UPS-Model | <p>-</p> | SNMP agent |
UPS-Model<p>Update: 12h</p> |
UPS-Temperature | <p>1.3.6.1.4.1.3808.1.1.1.2.2.3.0</p> | SNMP agent |
UPS-TemperatureLevel<p>Update: 30s</p> |
UPS-InputFrequency | <p>-</p> | SNMP agent |
UPS-InputFrequency<p>Update: 30s</p> |
UPS-FirmwareRevision | <p>-</p> | SNMP agent |
UPS-FirmwareRevision<p>Update: 12h</p> |
UPS-BatteryMinutesRemaining | <p>-</p> | SNMP agent |
UPS-BatteryMinutesRemaining<p>Update: 30s</p> |
UPS-DateLastReplacedBattery | <p>-</p> | SNMP agent |
UPS-DateLastReplaced<p>Update: 30s</p> |
UPS-BatteryReplaceStatus | <p>-</p> | SNMP agent |
UPS-BatteryReplaceStatus<p>Update: 30s</p> |
UPS-LoadPower | <p>-</p> | SNMP agent |
UPS-LoadPower<p>Update: 12h</p> |
UPS-InputStatus | <p>1 ⇒ normal 2 ⇒ overVoltage 3 ⇒ underVoltage 4 ⇒ frequencyFailure 5 ⇒ blackout</p> | SNMP agent |
UPS-InputStatus<p>Update: 30s</p> |
There are no triggers in this template.