Tested on Powercom 10K model and CY504 card
Roman Puzanov
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| PowerCom: Temperature | <p>-</p> | SNMP agent |
Temperature<p>Update: 30s</p> |
| PowerCom: Output Voltage | <p>-</p> | SNMP agent |
OutputVoltage<p>Update: 30s</p> |
| PowerCom: Battery Voltage | <p>-</p> | SNMP agent |
BatteryVoltage<p>Update: 30s</p> |
| PowerCom: TimeOnBattery | <p>-</p> | SNMP agent |
TimeOnBattery<p>Update: 30s</p> |
| PowerCom: Output Load (%) | <p>-</p> | SNMP agent |
OutputLoad<p>Update: 30s</p> |
| PowerCom: Firmware Version UPS | <p>-</p> | SNMP agent |
FirmwareUPS<p>Update: 40320s</p> |
| PowerCom: Output Power | <p>-</p> | SNMP agent |
OutputPower<p>Update: 5s</p> |
| PowerCom: Input Frequency | <p>-</p> | SNMP agent |
InputFrequency<p>Update: 30s</p> |
| PowerCom: Output Frequency | <p>-</p> | SNMP agent |
OutputFrequency<p>Update: 30s</p> |
| PowerCom: SysUpTime | <p>-</p> | SNMP agent |
SysUpTime<p>Update: 30s</p> |
| PowerCom: Battery Status | <p>-</p> | SNMP agent |
BatteryStatus<p>Update: 30s</p> |
| PowerCom: Input Voltage | <p>-</p> | SNMP agent |
InputVoltage<p>Update: 30s</p> |
| PowerCom: Run Time Remaining | <p>-</p> | SNMP agent |
RunTimeRemaining<p>Update: 30s</p> |
| PowerCom: Battery Capacity (%) | <p>-</p> | SNMP agent |
BatteryCapacity<p>Update: 30s</p> |
| PowerCom: Firmware Version Card | <p>-</p> | SNMP agent |
FirmwareVersionCard<p>Update: 40320s</p> |
| PowerCom: Model | <p>-</p> | SNMP agent |
ModelUPS<p>Update: 40320s</p> |
There are no triggers in this template.
Tested on Powercom 10K model and CY504 card
Roman Puzanov
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| PowerCom: SysUpTime | <p>-</p> | SNMP agent |
SysUpTime<p>Update: 30s</p> |
| PowerCom: Output Power | <p>-</p> | SNMP agent |
OutputPower<p>Update: 5s</p> |
| PowerCom: Battery Status | <p>-</p> | SNMP agent |
BatteryStatus<p>Update: 30s</p> |
| PowerCom: Input Voltage | <p>-</p> | SNMP agent |
InputVoltage<p>Update: 30s</p> |
| PowerCom: Run Time Remaining | <p>-</p> | SNMP agent |
RunTimeRemaining<p>Update: 30s</p> |
| PowerCom: Input Frequency | <p>-</p> | SNMP agent |
InputFrequency<p>Update: 30s</p> |
| PowerCom: Output Frequency | <p>-</p> | SNMP agent |
OutputFrequency<p>Update: 30s</p> |
| PowerCom: Output Voltage | <p>-</p> | SNMP agent |
OutputVoltage<p>Update: 30s</p> |
| PowerCom: Firmware Version Card | <p>-</p> | SNMP agent |
FirmwareVersionCard<p>Update: 40320s</p> |
| PowerCom: TimeOnBattery | <p>-</p> | SNMP agent |
TimeOnBattery<p>Update: 30s</p> |
| PowerCom: Model | <p>-</p> | SNMP agent |
ModelUPS<p>Update: 40320s</p> |
| PowerCom: Battery Capacity (%) | <p>-</p> | SNMP agent |
BatteryCapacity<p>Update: 30s</p> |
| PowerCom: Battery Voltage | <p>-</p> | SNMP agent |
BatteryVoltage<p>Update: 30s</p> |
| PowerCom: Temperature | <p>-</p> | SNMP agent |
Temperature<p>Update: 30s</p> |
| PowerCom: Output Load (%) | <p>-</p> | SNMP agent |
OutputLoad<p>Update: 30s</p> |
| PowerCom: Firmware Version UPS | <p>-</p> | SNMP agent |
FirmwareUPS<p>Update: 40320s</p> |
There are no triggers in this template.
Tested on Powercom 10K model and CY504 card
Roman Puzanov
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| PowerCom: SysUpTime | <p>-</p> | SNMP agent |
SysUpTime<p>Update: 30s</p> |
| PowerCom: Output Power | <p>-</p> | SNMP agent |
OutputPower<p>Update: 5s</p> |
| PowerCom: Battery Status | <p>-</p> | SNMP agent |
BatteryStatus<p>Update: 30s</p> |
| PowerCom: Input Voltage | <p>-</p> | SNMP agent |
InputVoltage<p>Update: 30s</p> |
| PowerCom: Run Time Remaining | <p>-</p> | SNMP agent |
RunTimeRemaining<p>Update: 30s</p> |
| PowerCom: Input Frequency | <p>-</p> | SNMP agent |
InputFrequency<p>Update: 30s</p> |
| PowerCom: Output Frequency | <p>-</p> | SNMP agent |
OutputFrequency<p>Update: 30s</p> |
| PowerCom: Output Voltage | <p>-</p> | SNMP agent |
OutputVoltage<p>Update: 30s</p> |
| PowerCom: Firmware Version Card | <p>-</p> | SNMP agent |
FirmwareVersionCard<p>Update: 40320s</p> |
| PowerCom: TimeOnBattery | <p>-</p> | SNMP agent |
TimeOnBattery<p>Update: 30s</p> |
| PowerCom: Model | <p>-</p> | SNMP agent |
ModelUPS<p>Update: 40320s</p> |
| PowerCom: Battery Capacity (%) | <p>-</p> | SNMP agent |
BatteryCapacity<p>Update: 30s</p> |
| PowerCom: Battery Voltage | <p>-</p> | SNMP agent |
BatteryVoltage<p>Update: 30s</p> |
| PowerCom: Temperature | <p>-</p> | SNMP agent |
Temperature<p>Update: 30s</p> |
| PowerCom: Output Load (%) | <p>-</p> | SNMP agent |
OutputLoad<p>Update: 30s</p> |
| PowerCom: Firmware Version UPS | <p>-</p> | SNMP agent |
FirmwareUPS<p>Update: 40320s</p> |
There are no triggers in this template.