There is a UPS SNMP template for UPS with rfc-1628 support. Tested with:
Sergey Morozov
There are no macros links in this template.
Name |
---|
Template Module ICMP Ping |
Template Module Generic SNMP |
Name | Description | Type | Key and additional info |
---|---|---|---|
Output line | <p>-</p> | SNMP agent |
ups.line.output<p>Update: 1h</p> |
Input line | <p>-</p> | SNMP agent |
ups.line.input<p>Update: 1h</p> |
Bypass | <p>-</p> | SNMP agent |
ups.bypass<p>Update: 1h</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS battery status | <p>-</p> | SNMP agent |
ups.battery.status<p>Update: 1m</p> |
UPS output frequency | <p>-</p> | SNMP agent |
ups.line.output.frequency<p>Update: 1m</p> |
UPS model name | <p>-</p> | SNMP agent |
ups.ident.model<p>Update: 1d</p> |
UPS attached devices | <p>-</p> | SNMP agent |
ups.ident.attachedDevices<p>Update: 1d</p> |
UPS estimated charge remaining | <p>-</p> | SNMP agent |
ups.battery.estimatedChargeRemaining<p>Update: 1m</p> |
UPS battery temperature | <p>-</p> | SNMP agent |
ups.battery.temperature<p>Update: 1m</p> |
UPS output source | <p>-</p> | SNMP agent |
ups.line.output.source<p>Update: 1m</p> |
UPS battery current | <p>-</p> | SNMP agent |
ups.battery.current<p>Update: 1m</p> |
UPS input line bads | <p>-</p> | SNMP agent |
ups.line.input.Bads<p>Update: 1m</p> |
UPS manufacturer | <p>-</p> | SNMP agent |
ups.ident.manufacturer<p>Update: 1d</p> |
UPS battery voltage | <p>-</p> | SNMP agent |
ups.battery.voltage<p>Update: 1m</p> |
UPS bypass frequency | <p>-</p> | SNMP agent |
ups.bypass.frequency<p>Update: 1m</p> |
UPS agent software version | <p>-</p> | SNMP agent |
ups.ident.agentSoftwareVersion<p>Update: 1d</p> |
UPS name | <p>-</p> | SNMP agent |
ups.ident.name<p>Update: 1d</p> |
UPS output current {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.current[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS output percent load {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.percentload[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS output power {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.power[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS output voltage {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.voltage[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input current {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.current[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input frequency {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.frequency[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input true power {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.truePower[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input voltage {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.voltage[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS bypass current {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.bypass.current[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS bypass power {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.bypass.power[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS bypass voltage {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.bypass.voltage[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
There are no triggers in this template.
There is a UPS SNMP template for UPS with rfc-1628 support. Tested with:
Sergey Morozov
There are no macros links in this template.
Name |
---|
Template Module ICMP Ping |
Template Module Generic SNMP |
Name | Description | Type | Key and additional info |
---|---|---|---|
Output line | <p>-</p> | SNMP agent |
ups.line.output<p>Update: 1h</p> |
Input line | <p>-</p> | SNMP agent |
ups.line.input<p>Update: 1h</p> |
Bypass | <p>-</p> | SNMP agent |
ups.bypass<p>Update: 1h</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS battery status | <p>-</p> | SNMP agent |
ups.battery.status<p>Update: 1m</p> |
UPS output frequency | <p>-</p> | SNMP agent |
ups.line.output.frequency<p>Update: 1m</p> |
UPS model name | <p>-</p> | SNMP agent |
ups.ident.model<p>Update: 1d</p> |
UPS attached devices | <p>-</p> | SNMP agent |
ups.ident.attachedDevices<p>Update: 1d</p> |
UPS estimated charge remaining | <p>-</p> | SNMP agent |
ups.battery.estimatedChargeRemaining<p>Update: 1m</p> |
UPS battery temperature | <p>-</p> | SNMP agent |
ups.battery.temperature<p>Update: 1m</p> |
UPS output source | <p>-</p> | SNMP agent |
ups.line.output.source<p>Update: 1m</p> |
UPS battery current | <p>-</p> | SNMP agent |
ups.battery.current<p>Update: 1m</p> |
UPS input line bads | <p>-</p> | SNMP agent |
ups.line.input.Bads<p>Update: 1m</p> |
UPS manufacturer | <p>-</p> | SNMP agent |
ups.ident.manufacturer<p>Update: 1d</p> |
UPS battery voltage | <p>-</p> | SNMP agent |
ups.battery.voltage<p>Update: 1m</p> |
UPS bypass frequency | <p>-</p> | SNMP agent |
ups.bypass.frequency<p>Update: 1m</p> |
UPS agent software version | <p>-</p> | SNMP agent |
ups.ident.agentSoftwareVersion<p>Update: 1d</p> |
UPS name | <p>-</p> | SNMP agent |
ups.ident.name<p>Update: 1d</p> |
UPS output current {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.current[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS output percent load {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.percentload[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS output power {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.power[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS output voltage {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.voltage[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input current {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.current[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input frequency {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.frequency[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input true power {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.truePower[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input voltage {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.voltage[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS bypass current {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.bypass.current[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS bypass power {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.bypass.power[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS bypass voltage {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.bypass.voltage[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
There are no triggers in this template.
There is a UPS SNMP template for UPS with rfc-1628 support. Tested with:
Sergey Morozov
There are no macros links in this template.
Name |
---|
Template Module ICMP Ping |
Template Module Generic SNMP |
Name | Description | Type | Key and additional info |
---|---|---|---|
Output line | <p>-</p> | SNMP agent |
ups.line.output<p>Update: 1h</p> |
Input line | <p>-</p> | SNMP agent |
ups.line.input<p>Update: 1h</p> |
Bypass | <p>-</p> | SNMP agent |
ups.bypass<p>Update: 1h</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS battery status | <p>-</p> | SNMP agent |
ups.battery.status<p>Update: 1m</p> |
UPS output frequency | <p>-</p> | SNMP agent |
ups.line.output.frequency<p>Update: 1m</p> |
UPS model name | <p>-</p> | SNMP agent |
ups.ident.model<p>Update: 1d</p> |
UPS attached devices | <p>-</p> | SNMP agent |
ups.ident.attachedDevices<p>Update: 1d</p> |
UPS estimated charge remaining | <p>-</p> | SNMP agent |
ups.battery.estimatedChargeRemaining<p>Update: 1m</p> |
UPS battery temperature | <p>-</p> | SNMP agent |
ups.battery.temperature<p>Update: 1m</p> |
UPS output source | <p>-</p> | SNMP agent |
ups.line.output.source<p>Update: 1m</p> |
UPS battery current | <p>-</p> | SNMP agent |
ups.battery.current<p>Update: 1m</p> |
UPS input line bads | <p>-</p> | SNMP agent |
ups.line.input.Bads<p>Update: 1m</p> |
UPS manufacturer | <p>-</p> | SNMP agent |
ups.ident.manufacturer<p>Update: 1d</p> |
UPS battery voltage | <p>-</p> | SNMP agent |
ups.battery.voltage<p>Update: 1m</p> |
UPS bypass frequency | <p>-</p> | SNMP agent |
ups.bypass.frequency<p>Update: 1m</p> |
UPS agent software version | <p>-</p> | SNMP agent |
ups.ident.agentSoftwareVersion<p>Update: 1d</p> |
UPS name | <p>-</p> | SNMP agent |
ups.ident.name<p>Update: 1d</p> |
UPS output current {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.current[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS output percent load {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.percentload[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS output power {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.power[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS output voltage {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.output.voltage[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input current {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.current[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input frequency {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.frequency[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input true power {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.truePower[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS input voltage {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.line.input.voltage[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS bypass current {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.bypass.current[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS bypass power {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.bypass.power[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
UPS bypass voltage {#SNMPINDEX} | <p>-</p> | SNMP agent |
ups.bypass.voltage[{#SNMPINDEX}]<p>Update: 1m</p><p>LLD</p> |
There are no triggers in this template.