Template for Vertiv EXS 10 kV UPS. Check Input voltage (VAC), output volatge (VAC), output current (A), output power (W), batterie, temperature
R.P.Wimmer
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| UPS output current L1 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent1<p>Update: 60</p> |
| UPS output voltage L3 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage3<p>Update: 60</p> |
| Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 60</p> |
| UPS input voltage L2 | <p>-</p> | SNMP agent |
upsAdvInputVoltage2<p>Update: 60</p> |
| UPS output current L2 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent2<p>Update: 60</p> |
| UPS output power L1 | <p>-</p> | SNMP agent |
upsAdvOutputPower1<p>Update: 60</p> |
| UPS time on battery | <p>-</p> | SNMP agent |
upsBasicBatteryTimeOnBattery<p>Update: 60</p> |
| UPS system status | <p>-</p> | SNMP agent |
upsSystemStatus<p>Update: 60</p> |
| Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 60</p> |
| Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 60</p> |
| UPS output load (%) | <p>-</p> | SNMP agent |
upsAdvOutputLoad<p>Update: 60</p> |
| Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 60</p> |
| UPS Inlet air temperature | <p>-</p> | SNMP agent |
upsInletAirTemperature<p>Update: 60</p> |
| UPS battery status | <p>-</p> | SNMP agent |
upsBasicBatteryStatus<p>Update: 60</p> |
| UPS input voltage L3 | <p>-</p> | SNMP agent |
upsAdvInputVoltage3<p>Update: 60</p> |
| UPS output voltage L2 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage2<p>Update: 60</p> |
| UPS output power L2 | <p>-</p> | SNMP agent |
upsAdvOutputPower2<p>Update: 60</p> |
| UPS battery capacity (%) | <p>-</p> | SNMP agent |
upsAdvBatteryCapacity<p>Update: 60</p> |
| UPS battery time remaining | <p>-</p> | SNMP agent |
upsBatteryTimeRemaining<p>Update: 60</p> |
| Software version (full) | <p>-</p> | SNMP agent |
sysDescr<p>Update: 60</p> |
| UPS output current L3 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent3<p>Update: 60</p> |
| UPS output voltage L1 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage1<p>Update: 60</p> |
| UPS input voltage L1 | <p>-</p> | SNMP agent |
upsAdvInputVoltage1<p>Update: 60</p> |
| UPS output power L3 | <p>-</p> | SNMP agent |
upsAdvOutputPower3<p>Update: 60</p> |
There are no triggers in this template.
Template for Vertiv EXS 10 kV UPS. Check Input voltage (VAC), output volatge (VAC), output current (A), output power (W), batterie, temperature
R.P.Wimmer
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| UPS output current L1 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent1<p>Update: 60</p> |
| UPS system status | <p>-</p> | SNMP agent |
upsSystemStatus<p>Update: 60</p> |
| UPS output load (%) | <p>-</p> | SNMP agent |
upsAdvOutputLoad<p>Update: 60</p> |
| Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 60</p> |
| UPS input voltage L1 | <p>-</p> | SNMP agent |
upsAdvInputVoltage1<p>Update: 60</p> |
| Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 60</p> |
| UPS Inlet air temperature | <p>-</p> | SNMP agent |
upsInletAirTemperature<p>Update: 60</p> |
| Software version (full) | <p>-</p> | SNMP agent |
sysDescr<p>Update: 60</p> |
| UPS battery capacity (%) | <p>-</p> | SNMP agent |
upsAdvBatteryCapacity<p>Update: 60</p> |
| UPS input voltage L2 | <p>-</p> | SNMP agent |
upsAdvInputVoltage2<p>Update: 60</p> |
| UPS output voltage L2 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage2<p>Update: 60</p> |
| UPS output current L2 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent2<p>Update: 60</p> |
| UPS output voltage L3 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage3<p>Update: 60</p> |
| UPS output power L2 | <p>-</p> | SNMP agent |
upsAdvOutputPower2<p>Update: 60</p> |
| Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 60</p> |
| UPS output current L3 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent3<p>Update: 60</p> |
| UPS battery time remaining | <p>-</p> | SNMP agent |
upsBatteryTimeRemaining<p>Update: 60</p> |
| UPS output voltage L1 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage1<p>Update: 60</p> |
| UPS time on battery | <p>-</p> | SNMP agent |
upsBasicBatteryTimeOnBattery<p>Update: 60</p> |
| UPS battery status | <p>-</p> | SNMP agent |
upsBasicBatteryStatus<p>Update: 60</p> |
| UPS output power L3 | <p>-</p> | SNMP agent |
upsAdvOutputPower3<p>Update: 60</p> |
| UPS input voltage L3 | <p>-</p> | SNMP agent |
upsAdvInputVoltage3<p>Update: 60</p> |
| Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 60</p> |
| UPS output power L1 | <p>-</p> | SNMP agent |
upsAdvOutputPower1<p>Update: 60</p> |
There are no triggers in this template.
Template for Vertiv EXS 10 kV UPS. Check Input voltage (VAC), output volatge (VAC), output current (A), output power (W), batterie, temperature
R.P.Wimmer
There are no macros links in this template.
| Name |
|---|
| Template Module ICMP Ping |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| UPS output current L1 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent1<p>Update: 60</p> |
| UPS system status | <p>-</p> | SNMP agent |
upsSystemStatus<p>Update: 60</p> |
| UPS output load (%) | <p>-</p> | SNMP agent |
upsAdvOutputLoad<p>Update: 60</p> |
| Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 60</p> |
| UPS input voltage L1 | <p>-</p> | SNMP agent |
upsAdvInputVoltage1<p>Update: 60</p> |
| Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 60</p> |
| UPS Inlet air temperature | <p>-</p> | SNMP agent |
upsInletAirTemperature<p>Update: 60</p> |
| Software version (full) | <p>-</p> | SNMP agent |
sysDescr<p>Update: 60</p> |
| UPS battery capacity (%) | <p>-</p> | SNMP agent |
upsAdvBatteryCapacity<p>Update: 60</p> |
| UPS input voltage L2 | <p>-</p> | SNMP agent |
upsAdvInputVoltage2<p>Update: 60</p> |
| UPS output voltage L2 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage2<p>Update: 60</p> |
| UPS output current L2 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent2<p>Update: 60</p> |
| UPS output voltage L3 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage3<p>Update: 60</p> |
| UPS output power L2 | <p>-</p> | SNMP agent |
upsAdvOutputPower2<p>Update: 60</p> |
| Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 60</p> |
| UPS output current L3 | <p>-</p> | SNMP agent |
upsAdvOutputCurrent3<p>Update: 60</p> |
| UPS battery time remaining | <p>-</p> | SNMP agent |
upsBatteryTimeRemaining<p>Update: 60</p> |
| UPS output voltage L1 | <p>-</p> | SNMP agent |
upsAdvOutputVoltage1<p>Update: 60</p> |
| UPS time on battery | <p>-</p> | SNMP agent |
upsBasicBatteryTimeOnBattery<p>Update: 60</p> |
| UPS battery status | <p>-</p> | SNMP agent |
upsBasicBatteryStatus<p>Update: 60</p> |
| UPS output power L3 | <p>-</p> | SNMP agent |
upsAdvOutputPower3<p>Update: 60</p> |
| UPS input voltage L3 | <p>-</p> | SNMP agent |
upsAdvInputVoltage3<p>Update: 60</p> |
| Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 60</p> |
| UPS output power L1 | <p>-</p> | SNMP agent |
upsAdvOutputPower1<p>Update: 60</p> |
There are no triggers in this template.