Available versions




UPS GE LP33 - TriPhase

Description

UPS General Electric - Model LP 33 Trifásica - Cláudio Ferreira

Overview

Zabbix Template for UPS General Electric (GE) Model LP33 Triphase. Works with generic UPS’s SNMP v2c enabled too.

Contains most importante items (49), 9 triggers for alerting and 8 graphics.

Because almost OIDs are generic, this template works with other UPS SNMP v2c enabled.

Author

Cláudio Ferreira

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
Battery Status <p>-</p> SNMP agent upsBatteryStatus.0<p>Update: 30s</p>
Manufacturer <p>-</p> SNMP agent upsIdentManufacturer.0<p>Update: 1d</p>
Bypass Voltage L2 <p>-</p> SNMP agent upsBypassVoltage.2<p>Update: 30s</p>
Input Voltage L1 <p>-</p> SNMP agent upsInputVoltage.1<p>Update: 30s</p>
Input Voltage Max L3 <p>-</p> SNMP agent upsInputVoltageMax.3<p>Update: 30s</p>
Battery Charge Method <p>-</p> SNMP agent upsBatteryChargeMethod.0<p>Update: 30s</p>
Output Source Presence <p>“The present source of output power. The enumeration none(2) indicates that there is no source of output power (and therefore no output power), for example, the system has opened the output breaker.(*)”</p> SNMP agent upsOutputSource.0<p>Update: 30s</p>
Output Voltage L2 <p>-</p> SNMP agent upsOutputVoltage.2<p>Update: 30s</p>
Output Current L2 <p>-</p> SNMP agent upsOutputCurrent.2<p>Update: 30s</p>
Output Num Lines <p>-</p> SNMP agent upsOutputNumLines.0<p>Update: 1h</p>
Bypass Voltage L1 <p>-</p> SNMP agent upsBypassVoltage.1<p>Update: 30s</p>
Estimated Charge Remaining <p>-</p> SNMP agent upsEstimatedChargeRemaining.0<p>Update: 30s</p>
Input Frequency <p>-</p> SNMP agent upsInputFrequency.2<p>Update: 30s</p>
Input Voltage L3 <p>-</p> SNMP agent upsInputVoltage.3<p>Update: 30s</p>
Estimated minutes Remaining <p>-</p> SNMP agent upsEstimatedMinutesRemaining.0<p>Update: 30s</p>
ComProt Version <p>-</p> SNMP agent upsIdentComProtVersion.0<p>Update: 1h</p>
Input Voltage Max L2 <p>-</p> SNMP agent upsInputVoltageMax.2<p>Update: 30s</p>
Ups Software Version <p>-</p> SNMP agent upsIdentUPSSoftwareVersion.0<p>Update: 1h</p>
Input Voltage L2 <p>-</p> SNMP agent upsInputVoltage.2<p>Update: 30s</p>
Input Num Lines <p>-</p> SNMP agent upsInputNumLines.0<p>Update: 1h</p>
Output Voltage L1 <p>-</p> SNMP agent upsOutputVoltage.1<p>Update: 30s</p>
Rectifier Status <p>-</p> SNMP agent upsRectifierOnOff.0<p>Update: 30s</p>
Output Current L1 <p>-</p> SNMP agent upsOutputCurrent.1<p>Update: 30s</p>
Battery Voltage <p>-</p> SNMP agent upsBatteryVoltage.0<p>Update: 30s</p>
Output Percent Load L1 <p>-</p> SNMP agent upsOutputPercentLoad.1<p>Update: 30s</p>
Agent Software Version <p>-</p> SNMP agent upsIdentAgentSoftwareVersion.0<p>Update: 1h</p>
Nome <p>-</p> SNMP agent upsIdentName.0<p>Update: 1h</p>
Output Percent Load L2 <p>-</p> SNMP agent upsOutputPercentLoad.2<p>Update: 30s</p>
Input Voltage Min L3 <p>-</p> SNMP agent upsInputVoltageMin.3<p>Update: 30s</p>
Input Voltage Min L2 <p>-</p> SNMP agent upsInputVoltageMin.2<p>Update: 30s</p>
Output Percent Load L3 <p>-</p> SNMP agent upsOutputPercentLoad.3<p>Update: 30s</p>
Inverter Status <p>-</p> SNMP agent upsInverterOnOff.0<p>Update: 30s</p>
Battery Temperature <p>-</p> SNMP agent upsBatteryTemperature.0<p>Update: 30s</p>
Input Voltage Min L1 <p>-</p> SNMP agent upsInputVoltageMin.1<p>Update: 30s</p>
Load Source <p>-</p> SNMP agent upsLoadSource.0<p>Update: 30s</p>
Operating Time <p>-</p> SNMP agent upsIdentOperatingTime.0<p>Update: 30s</p>
Output Voltage L3 <p>-</p> SNMP agent upsOutputVoltage.3<p>Update: 30s</p>
Model <p>-</p> SNMP agent upsIdentModel.0<p>Update: 1d</p>
Bypass Frequency <p>-</p> SNMP agent upsBypassFrequency.0<p>Update: 30s</p>
Input Voltage Max L1 <p>-</p> SNMP agent upsInputVoltageMax.1<p>Update: 30s</p>
Output Frequency <p>-</p> SNMP agent upsOutputFrequency.0<p>Update: 30s</p>
Output Current L3 <p>-</p> SNMP agent upsOutputCurrent.3<p>Update: 30s</p>
Bypass Status <p>-</p> SNMP agent upsBypassOnOff.0<p>Update: 30s</p>
Bypass Voltage L3 <p>-</p> SNMP agent upsBypassVoltage.3<p>Update: 30s</p>
Input Line Bads <p>-</p> SNMP agent upsInputLineBads.0<p>Update: 30s</p>
Active Alarms Present <p>-</p> SNMP agent upsAlarmsPresent.0<p>Update: 30s</p>
Time on Battery <p>-</p> SNMP agent upsSecondsOnBattery.0<p>Update: 30s</p>
UPS Mode <p>-</p> SNMP agent upsUPSMode.0<p>Update: 30s</p>
Serial Number <p>-</p> SNMP agent upsIdentUPSSerialNumber.0<p>Update: 1d</p>

Triggers

There are no triggers in this template.

UPS GE LP33 - TriPhase

Description

UPS General Electric - Model LP 33 Trifásica - Cláudio Ferreira

Overview

Zabbix Template for UPS General Electric (GE) Model LP33 Triphase. Works with generic UPS’s SNMP v2c enabled too.

Contains most importante items (49), 9 triggers for alerting and 8 graphics.

Because almost OIDs are generic, this template works with other UPS SNMP v2c enabled.

Author

Cláudio Ferreira

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
Input Voltage Min L2 <p>-</p> SNMP agent upsInputVoltageMin.2<p>Update: 30s</p>
Output Percent Load L3 <p>-</p> SNMP agent upsOutputPercentLoad.3<p>Update: 30s</p>
Bypass Voltage L1 <p>-</p> SNMP agent upsBypassVoltage.1<p>Update: 30s</p>
Output Frequency <p>-</p> SNMP agent upsOutputFrequency.0<p>Update: 30s</p>
Inverter Status <p>-</p> SNMP agent upsInverterOnOff.0<p>Update: 30s</p>
Bypass Voltage L2 <p>-</p> SNMP agent upsBypassVoltage.2<p>Update: 30s</p>
Input Voltage L1 <p>-</p> SNMP agent upsInputVoltage.1<p>Update: 30s</p>
Input Line Bads <p>-</p> SNMP agent upsInputLineBads.0<p>Update: 30s</p>
Battery Status <p>-</p> SNMP agent upsBatteryStatus.0<p>Update: 30s</p>
Output Voltage L1 <p>-</p> SNMP agent upsOutputVoltage.1<p>Update: 30s</p>
Operating Time <p>-</p> SNMP agent upsIdentOperatingTime.0<p>Update: 30s</p>
ComProt Version <p>-</p> SNMP agent upsIdentComProtVersion.0<p>Update: 1h</p>
Input Voltage Max L2 <p>-</p> SNMP agent upsInputVoltageMax.2<p>Update: 30s</p>
Input Frequency <p>-</p> SNMP agent upsInputFrequency.2<p>Update: 30s</p>
Agent Software Version <p>-</p> SNMP agent upsIdentAgentSoftwareVersion.0<p>Update: 1h</p>
Bypass Status <p>-</p> SNMP agent upsBypassOnOff.0<p>Update: 30s</p>
Output Voltage L3 <p>-</p> SNMP agent upsOutputVoltage.3<p>Update: 30s</p>
Output Current L1 <p>-</p> SNMP agent upsOutputCurrent.1<p>Update: 30s</p>
Load Source <p>-</p> SNMP agent upsLoadSource.0<p>Update: 30s</p>
Output Voltage L2 <p>-</p> SNMP agent upsOutputVoltage.2<p>Update: 30s</p>
Input Voltage Min L3 <p>-</p> SNMP agent upsInputVoltageMin.3<p>Update: 30s</p>
Input Num Lines <p>-</p> SNMP agent upsInputNumLines.0<p>Update: 1h</p>
Ups Software Version <p>-</p> SNMP agent upsIdentUPSSoftwareVersion.0<p>Update: 1h</p>
Output Current L3 <p>-</p> SNMP agent upsOutputCurrent.3<p>Update: 30s</p>
Input Voltage L3 <p>-</p> SNMP agent upsInputVoltage.3<p>Update: 30s</p>
Nome <p>-</p> SNMP agent upsIdentName.0<p>Update: 1h</p>
Battery Temperature <p>-</p> SNMP agent upsBatteryTemperature.0<p>Update: 30s</p>
Output Percent Load L2 <p>-</p> SNMP agent upsOutputPercentLoad.2<p>Update: 30s</p>
Input Voltage Min L1 <p>-</p> SNMP agent upsInputVoltageMin.1<p>Update: 30s</p>
Battery Charge Method <p>-</p> SNMP agent upsBatteryChargeMethod.0<p>Update: 30s</p>
Bypass Voltage L3 <p>-</p> SNMP agent upsBypassVoltage.3<p>Update: 30s</p>
Active Alarms Present <p>-</p> SNMP agent upsAlarmsPresent.0<p>Update: 30s</p>
Output Current L2 <p>-</p> SNMP agent upsOutputCurrent.2<p>Update: 30s</p>
Output Num Lines <p>-</p> SNMP agent upsOutputNumLines.0<p>Update: 1h</p>
Input Voltage L2 <p>-</p> SNMP agent upsInputVoltage.2<p>Update: 30s</p>
Estimated minutes Remaining <p>-</p> SNMP agent upsEstimatedMinutesRemaining.0<p>Update: 30s</p>
Output Source Presence <p>“The present source of output power. The enumeration none(2) indicates that there is no source of output power (and therefore no output power), for example, the system has opened the output breaker.(*)”</p> SNMP agent upsOutputSource.0<p>Update: 30s</p>
Rectifier Status <p>-</p> SNMP agent upsRectifierOnOff.0<p>Update: 30s</p>
Battery Voltage <p>-</p> SNMP agent upsBatteryVoltage.0<p>Update: 30s</p>
Serial Number <p>-</p> SNMP agent upsIdentUPSSerialNumber.0<p>Update: 1d</p>
UPS Mode <p>-</p> SNMP agent upsUPSMode.0<p>Update: 30s</p>
Estimated Charge Remaining <p>-</p> SNMP agent upsEstimatedChargeRemaining.0<p>Update: 30s</p>
Bypass Frequency <p>-</p> SNMP agent upsBypassFrequency.0<p>Update: 30s</p>
Input Voltage Max L1 <p>-</p> SNMP agent upsInputVoltageMax.1<p>Update: 30s</p>
Input Voltage Max L3 <p>-</p> SNMP agent upsInputVoltageMax.3<p>Update: 30s</p>
Manufacturer <p>-</p> SNMP agent upsIdentManufacturer.0<p>Update: 1d</p>
Time on Battery <p>-</p> SNMP agent upsSecondsOnBattery.0<p>Update: 30s</p>
Output Percent Load L1 <p>-</p> SNMP agent upsOutputPercentLoad.1<p>Update: 30s</p>
Model <p>-</p> SNMP agent upsIdentModel.0<p>Update: 1d</p>

Triggers

There are no triggers in this template.

UPS GE LP33 - TriPhase

Description

UPS General Electric - Model LP 33 Trifásica - Cláudio Ferreira

Overview

Zabbix Template for UPS General Electric (GE) Model LP33 Triphase. Works with generic UPS’s SNMP v2c enabled too.

Contains most importante items (49), 9 triggers for alerting and 8 graphics.

Because almost OIDs are generic, this template works with other UPS SNMP v2c enabled.

Author

Cláudio Ferreira

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
Input Voltage Min L2 <p>-</p> SNMP agent upsInputVoltageMin.2<p>Update: 30s</p>
Output Percent Load L3 <p>-</p> SNMP agent upsOutputPercentLoad.3<p>Update: 30s</p>
Bypass Voltage L1 <p>-</p> SNMP agent upsBypassVoltage.1<p>Update: 30s</p>
Output Frequency <p>-</p> SNMP agent upsOutputFrequency.0<p>Update: 30s</p>
Inverter Status <p>-</p> SNMP agent upsInverterOnOff.0<p>Update: 30s</p>
Bypass Voltage L2 <p>-</p> SNMP agent upsBypassVoltage.2<p>Update: 30s</p>
Input Voltage L1 <p>-</p> SNMP agent upsInputVoltage.1<p>Update: 30s</p>
Input Line Bads <p>-</p> SNMP agent upsInputLineBads.0<p>Update: 30s</p>
Battery Status <p>-</p> SNMP agent upsBatteryStatus.0<p>Update: 30s</p>
Output Voltage L1 <p>-</p> SNMP agent upsOutputVoltage.1<p>Update: 30s</p>
Operating Time <p>-</p> SNMP agent upsIdentOperatingTime.0<p>Update: 30s</p>
ComProt Version <p>-</p> SNMP agent upsIdentComProtVersion.0<p>Update: 1h</p>
Input Voltage Max L2 <p>-</p> SNMP agent upsInputVoltageMax.2<p>Update: 30s</p>
Input Frequency <p>-</p> SNMP agent upsInputFrequency.2<p>Update: 30s</p>
Agent Software Version <p>-</p> SNMP agent upsIdentAgentSoftwareVersion.0<p>Update: 1h</p>
Bypass Status <p>-</p> SNMP agent upsBypassOnOff.0<p>Update: 30s</p>
Output Voltage L3 <p>-</p> SNMP agent upsOutputVoltage.3<p>Update: 30s</p>
Output Current L1 <p>-</p> SNMP agent upsOutputCurrent.1<p>Update: 30s</p>
Load Source <p>-</p> SNMP agent upsLoadSource.0<p>Update: 30s</p>
Output Voltage L2 <p>-</p> SNMP agent upsOutputVoltage.2<p>Update: 30s</p>
Input Voltage Min L3 <p>-</p> SNMP agent upsInputVoltageMin.3<p>Update: 30s</p>
Input Num Lines <p>-</p> SNMP agent upsInputNumLines.0<p>Update: 1h</p>
Ups Software Version <p>-</p> SNMP agent upsIdentUPSSoftwareVersion.0<p>Update: 1h</p>
Output Current L3 <p>-</p> SNMP agent upsOutputCurrent.3<p>Update: 30s</p>
Input Voltage L3 <p>-</p> SNMP agent upsInputVoltage.3<p>Update: 30s</p>
Nome <p>-</p> SNMP agent upsIdentName.0<p>Update: 1h</p>
Battery Temperature <p>-</p> SNMP agent upsBatteryTemperature.0<p>Update: 30s</p>
Output Percent Load L2 <p>-</p> SNMP agent upsOutputPercentLoad.2<p>Update: 30s</p>
Input Voltage Min L1 <p>-</p> SNMP agent upsInputVoltageMin.1<p>Update: 30s</p>
Battery Charge Method <p>-</p> SNMP agent upsBatteryChargeMethod.0<p>Update: 30s</p>
Bypass Voltage L3 <p>-</p> SNMP agent upsBypassVoltage.3<p>Update: 30s</p>
Active Alarms Present <p>-</p> SNMP agent upsAlarmsPresent.0<p>Update: 30s</p>
Output Current L2 <p>-</p> SNMP agent upsOutputCurrent.2<p>Update: 30s</p>
Output Num Lines <p>-</p> SNMP agent upsOutputNumLines.0<p>Update: 1h</p>
Input Voltage L2 <p>-</p> SNMP agent upsInputVoltage.2<p>Update: 30s</p>
Estimated minutes Remaining <p>-</p> SNMP agent upsEstimatedMinutesRemaining.0<p>Update: 30s</p>
Output Source Presence <p>“The present source of output power. The enumeration none(2) indicates that there is no source of output power (and therefore no output power), for example, the system has opened the output breaker.(*)”</p> SNMP agent upsOutputSource.0<p>Update: 30s</p>
Rectifier Status <p>-</p> SNMP agent upsRectifierOnOff.0<p>Update: 30s</p>
Battery Voltage <p>-</p> SNMP agent upsBatteryVoltage.0<p>Update: 30s</p>
Serial Number <p>-</p> SNMP agent upsIdentUPSSerialNumber.0<p>Update: 1d</p>
UPS Mode <p>-</p> SNMP agent upsUPSMode.0<p>Update: 30s</p>
Estimated Charge Remaining <p>-</p> SNMP agent upsEstimatedChargeRemaining.0<p>Update: 30s</p>
Bypass Frequency <p>-</p> SNMP agent upsBypassFrequency.0<p>Update: 30s</p>
Input Voltage Max L1 <p>-</p> SNMP agent upsInputVoltageMax.1<p>Update: 30s</p>
Input Voltage Max L3 <p>-</p> SNMP agent upsInputVoltageMax.3<p>Update: 30s</p>
Manufacturer <p>-</p> SNMP agent upsIdentManufacturer.0<p>Update: 1d</p>
Time on Battery <p>-</p> SNMP agent upsSecondsOnBattery.0<p>Update: 30s</p>
Output Percent Load L1 <p>-</p> SNMP agent upsOutputPercentLoad.1<p>Update: 30s</p>
Model <p>-</p> SNMP agent upsIdentModel.0<p>Update: 1d</p>

Triggers

There are no triggers in this template.