Athough I’ve seen some Emerson templates, none of them worked with my UPS GXT3-XXXXX. So I created this template with lld for the UPS outputs and some itens that I usually need (like % Load).
It’s basic but can help someone in need some day.
Battery Charge Status, Battery Charge Remaining %, Battery Voltage, System Info (Contact, Uptime, Serial, Firmware and etc), Output Load and Input Voltage
ps: There’s a macro for SNMP community, so you might want to change it.
Tested in Zabbix 3.4.3
Cheers!
##################
Embora eu já tenha visto alguns templates de No-Breaks Emerson na internet, nenhum deles funcionou com meu equipamento (modelo GXT3-XXXX). Então eu criei este template com lld para descobrir as saidas e criar as % de carga de cada saída.
É um template básico mas pode ajudar alguém algum dia.
Carga de Bateria, Status da Bateris, Carga Restante (em %), Carga Restante (em min), Voltagem da Bateria, Informações do Equipamento (Nome, Tempo sem desligar, número de série, versão do firmware e etc), Carga de Saida e Tensão de Entrada.
Obs: Há uma macro criada para a community do SNMP, então talvez você queira alterar.
Sucesso!
Luiz Fernando Gondin Santos
Luiz Fernando Gondin
Name | Description | Default | Type |
---|---|---|---|
{$SNMP_COMMUNITY} | <p>-</p> | public |
Text macro |
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS Load Output | <p>Output Load Discovery</p> | SNMP agent |
upsOutputPercentLoad<p>Update: 30s</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Output Source | <p>-</p> | SNMP agent |
upsOutputSource<p>Update: 30s</p> |
System Firmware Version | <p>-</p> | SNMP agent |
lgpAgentIdenFirmwareVersion<p>Update: 1m</p> |
System Name | <p>-</p> | SNMP agent |
sysName<p>Update: 1m</p> |
System Description | <p>-</p> | SNMP agent |
sysDescr<p>Update: 1m</p> |
Battery Status | <p>-</p> | SNMP agent |
upsBatteryStatus<p>Update: 30s</p> |
System Network Card Model | <p>-</p> | SNMP agent |
lgpAgentIdenModel<p>Update: 1m</p> |
Battery Voltage | <p>-</p> | SNMP agent |
upsBatteryVoltage<p>Update: 30s</p> |
Ups Input Voltage | <p>-</p> | SNMP agent |
upsConfigInputVoltage<p>Update: 30s</p> |
System Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 1m</p> |
Battery Time Remaining | <p>-</p> | SNMP agent |
upsEstimatedMinutesRemaining<p>Update: 1m</p> |
Ups Output Voltage | <p>-</p> | SNMP agent |
upsConfigOutputVoltage<p>Update: 30s</p> |
Battery Charge Remaining | <p>-</p> | SNMP agent |
upsEstimatedChargeRemaining<p>Update: 1m</p> |
System Manufacturer | <p>-</p> | SNMP agent |
lgpAgentIdenManufacturer<p>Update: 1m</p> |
System Serial Number | <p>-</p> | SNMP agent |
lgpAgentIdenSerialNumber<p>Update: 1m</p> |
System Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 1m</p> |
Ups Auto Restart | <p>-</p> | SNMP agent |
upsAutoRestart<p>Update: 30s</p> |
System Model | <p>-</p> | SNMP agent |
upsIdenModel<p>Update: 1m</p> |
System Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 1m</p> |
Output Load at Line {#SNMPINDEX} | <p>Discovered Output Load Percentual</p> | SNMP agent |
ups.Output.Percentload.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
There are no triggers in this template.
Athough I’ve seen some Emerson templates, none of them worked with my UPS GXT3-XXXXX. So I created this template with lld for the UPS outputs and some itens that I usually need (like % Load).
It’s basic but can help someone in need some day.
Battery Charge Status, Battery Charge Remaining %, Battery Voltage, System Info (Contact, Uptime, Serial, Firmware and etc), Output Load and Input Voltage
ps: There’s a macro for SNMP community, so you might want to change it.
Tested in Zabbix 3.4.3
Cheers!
##################
Embora eu já tenha visto alguns templates de No-Breaks Emerson na internet, nenhum deles funcionou com meu equipamento (modelo GXT3-XXXX). Então eu criei este template com lld para descobrir as saidas e criar as % de carga de cada saída.
É um template básico mas pode ajudar alguém algum dia.
Carga de Bateria, Status da Bateris, Carga Restante (em %), Carga Restante (em min), Voltagem da Bateria, Informações do Equipamento (Nome, Tempo sem desligar, número de série, versão do firmware e etc), Carga de Saida e Tensão de Entrada.
Obs: Há uma macro criada para a community do SNMP, então talvez você queira alterar.
Sucesso!
Luiz Fernando Gondin Santos
Luiz Fernando Gondin
Name | Description | Default | Type |
---|---|---|---|
{$SNMP_COMMUNITY} | <p>-</p> | public |
Text macro |
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS Load Output | <p>Output Load Discovery</p> | SNMP agent |
upsOutputPercentLoad<p>Update: 30s</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
System Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 1m</p> |
System Firmware Version | <p>-</p> | SNMP agent |
lgpAgentIdenFirmwareVersion<p>Update: 1m</p> |
System Serial Number | <p>-</p> | SNMP agent |
lgpAgentIdenSerialNumber<p>Update: 1m</p> |
System Description | <p>-</p> | SNMP agent |
sysDescr<p>Update: 1m</p> |
Battery Charge Remaining | <p>-</p> | SNMP agent |
upsEstimatedChargeRemaining<p>Update: 1m</p> |
Ups Output Voltage | <p>-</p> | SNMP agent |
upsConfigOutputVoltage<p>Update: 30s</p> |
System Manufacturer | <p>-</p> | SNMP agent |
lgpAgentIdenManufacturer<p>Update: 1m</p> |
System Network Card Model | <p>-</p> | SNMP agent |
lgpAgentIdenModel<p>Update: 1m</p> |
Battery Voltage | <p>-</p> | SNMP agent |
upsBatteryVoltage<p>Update: 30s</p> |
System Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 1m</p> |
Battery Status | <p>-</p> | SNMP agent |
upsBatteryStatus<p>Update: 30s</p> |
System Name | <p>-</p> | SNMP agent |
sysName<p>Update: 1m</p> |
System Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 1m</p> |
Ups Input Voltage | <p>-</p> | SNMP agent |
upsConfigInputVoltage<p>Update: 30s</p> |
Output Source | <p>-</p> | SNMP agent |
upsOutputSource<p>Update: 30s</p> |
Ups Auto Restart | <p>-</p> | SNMP agent |
upsAutoRestart<p>Update: 30s</p> |
System Model | <p>-</p> | SNMP agent |
upsIdenModel<p>Update: 1m</p> |
Battery Time Remaining | <p>-</p> | SNMP agent |
upsEstimatedMinutesRemaining<p>Update: 1m</p> |
Output Load at Line {#SNMPINDEX} | <p>Discovered Output Load Percentual</p> | SNMP agent |
ups.Output.Percentload.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
There are no triggers in this template.
Athough I’ve seen some Emerson templates, none of them worked with my UPS GXT3-XXXXX. So I created this template with lld for the UPS outputs and some itens that I usually need (like % Load).
It’s basic but can help someone in need some day.
Battery Charge Status, Battery Charge Remaining %, Battery Voltage, System Info (Contact, Uptime, Serial, Firmware and etc), Output Load and Input Voltage
ps: There’s a macro for SNMP community, so you might want to change it.
Tested in Zabbix 3.4.3
Cheers!
##################
Embora eu já tenha visto alguns templates de No-Breaks Emerson na internet, nenhum deles funcionou com meu equipamento (modelo GXT3-XXXX). Então eu criei este template com lld para descobrir as saidas e criar as % de carga de cada saída.
É um template básico mas pode ajudar alguém algum dia.
Carga de Bateria, Status da Bateris, Carga Restante (em %), Carga Restante (em min), Voltagem da Bateria, Informações do Equipamento (Nome, Tempo sem desligar, número de série, versão do firmware e etc), Carga de Saida e Tensão de Entrada.
Obs: Há uma macro criada para a community do SNMP, então talvez você queira alterar.
Sucesso!
Luiz Fernando Gondin Santos
Luiz Fernando Gondin
Name | Description | Default | Type |
---|---|---|---|
{$SNMP_COMMUNITY} | <p>-</p> | public |
Text macro |
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
UPS Load Output | <p>Output Load Discovery</p> | SNMP agent |
upsOutputPercentLoad<p>Update: 30s</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
System Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 1m</p> |
System Firmware Version | <p>-</p> | SNMP agent |
lgpAgentIdenFirmwareVersion<p>Update: 1m</p> |
System Serial Number | <p>-</p> | SNMP agent |
lgpAgentIdenSerialNumber<p>Update: 1m</p> |
System Description | <p>-</p> | SNMP agent |
sysDescr<p>Update: 1m</p> |
Battery Charge Remaining | <p>-</p> | SNMP agent |
upsEstimatedChargeRemaining<p>Update: 1m</p> |
Ups Output Voltage | <p>-</p> | SNMP agent |
upsConfigOutputVoltage<p>Update: 30s</p> |
System Manufacturer | <p>-</p> | SNMP agent |
lgpAgentIdenManufacturer<p>Update: 1m</p> |
System Network Card Model | <p>-</p> | SNMP agent |
lgpAgentIdenModel<p>Update: 1m</p> |
Battery Voltage | <p>-</p> | SNMP agent |
upsBatteryVoltage<p>Update: 30s</p> |
System Uptime | <p>-</p> | SNMP agent |
sysUpTime<p>Update: 1m</p> |
Battery Status | <p>-</p> | SNMP agent |
upsBatteryStatus<p>Update: 30s</p> |
System Name | <p>-</p> | SNMP agent |
sysName<p>Update: 1m</p> |
System Contact | <p>-</p> | SNMP agent |
sysContact<p>Update: 1m</p> |
Ups Input Voltage | <p>-</p> | SNMP agent |
upsConfigInputVoltage<p>Update: 30s</p> |
Output Source | <p>-</p> | SNMP agent |
upsOutputSource<p>Update: 30s</p> |
Ups Auto Restart | <p>-</p> | SNMP agent |
upsAutoRestart<p>Update: 30s</p> |
System Model | <p>-</p> | SNMP agent |
upsIdenModel<p>Update: 1m</p> |
Battery Time Remaining | <p>-</p> | SNMP agent |
upsEstimatedMinutesRemaining<p>Update: 1m</p> |
Output Load at Line {#SNMPINDEX} | <p>Discovered Output Load Percentual</p> | SNMP agent |
ups.Output.Percentload.[{#SNMPINDEX}]<p>Update: 30s</p><p>LLD</p> |
There are no triggers in this template.