Available versions




Eaton ATS 230V 30A

Overview

Template for Eaton ATS 30A

64 Items
25 Triggers

Author

Peter Stanke

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
The output voltage <p>-</p> SNMP agent atsOutputVoltage<p>Update: 5m</p>
Internal auxiliary power is reported as failure (Source 1) <p>-</p> SNMP agent atsInputFailureAuxPower_source1<p>Update: 1m</p>
The present time in hh:mm:ss text format <p>-</p> SNMP agent atsConfigTimeTextTime<p>Update: 5m</p>
Setting of input trip voltage (Source 1) <p>-</p> SNMP agent atsConfigInputTrip_source1<p>Update: 1m</p>
Setting of input recovered time (Source 1) <p>-</p> SNMP agent atsConfigInputRecover_source1<p>Update: 1m</p>
Set the detected time of fast detected AC blackout by the comparing cycles (Source 1) <p>-</p> SNMP agent atsConfigInputMaxTime_source1<p>Update: 1m</p>
The manufacturer name of SNMP-Agent <p>-</p> SNMP agent atsAgentManufacturer<p>Update: 5m</p>
The relay, SCR and thermal switch fail <p>-</p> SNMP agent atsFailureSwitchFault<p>Update: 1m</p>
A voltage brownout was detected (Source 2) <p>-</p> SNMP agent atsInputFailureBrownout_source2<p>Update: 1m</p>
The status of input relay is OPEN (Source 1) <p>-</p> SNMP agent atsInputFailureRelayOpen_source1<p>Update: 1m</p>
The status of input SCR is OPEN (Source 1) <p>-</p> SNMP agent atsInputFailureSCROpen_source1<p>Update: 1m</p>
A voltage drop was detected (Source 2) <p>-</p> SNMP agent atsInputFailureDrop_source2<p>Update: 1m</p>
The operation mode <p>-</p> SNMP agent atsMessureOperationMode<p>Update: 1m</p>
Setting of input brownout low voltage (Source 1) <p>-</p> SNMP agent atsConfigInputBrownoutLow_source1<p>Update: 1m</p>
Setting of input recovered time (Source 2) <p>-</p> SNMP agent atsConfigInputRecover_source2<p>Update: 1m</p>
Device model name <p>-</p> SNMP agent atsIdentModel<p>Update: 1d</p>
Setting of input trip voltage (Source 2) <p>-</p> SNMP agent atsConfigInputTrip_source2<p>Update: 1m</p>
The status of input SCR is OPEN (Source 2) <p>-</p> SNMP agent atsInputFailureSCROpen_source2<p>Update: 1m</p>
Setting of input brownout high voltage (Source 2) <p>-</p> SNMP agent atsConfigInputBrownoutHigh_source2<p>Update: 1m</p>
The ambient temperature is over <p>-</p> SNMP agent atsFailureOverTemperature<p>Update: 1m</p>
The output current <p>-</p> SNMP agent atsOutputCurrent<p>Update: 5m</p>
The AC Blackout Sensitivity <p>-</p> SNMP agent atsConfigSensitivity<p>Update: 1m</p>
The prefered source <p>-</p> SNMP agent atsConfigPreferred<p>Update: 5m</p>
The input frequency (Source 2) <p>-</p> SNMP agent atsInputFrequency_source2<p>Update: 5m</p>
The input frequency is out of range (Source 2) <p>-</p> SNMP agent atsInputFailureFrequency_source2<p>Update: 1m</p>
Device ID codes <p>-</p> SNMP agent atsIdentIDCodes<p>Update: 1d</p>
Device serial number <p>-</p> SNMP agent atsIdentSerialNumber<p>Update: 1d</p>
The input is not operable (Source 1) <p>-</p> SNMP agent atsInputFailureNotOperable_source1<p>Update: 1m</p>
Internal auxiliary power is reported as failure (Source 2) <p>-</p> SNMP agent atsInputFailureAuxPower_source2<p>Update: 1m</p>
The firmware version of SNMP-Agent <p>-</p> SNMP agent atsAgentVersion<p>Update: 1d</p>
There is no output <p>-</p> SNMP agent atsFailureNoOutput<p>Update: 1m</p>
The input frequency is out of range (Source 1) <p>-</p> SNMP agent atsInputFailureFrequency_source1<p>Update: 1m</p>
The status of input relay is SHORT (Source 2) <p>-</p> SNMP agent atsInputFailureRelayShort_source2<p>Update: 1m</p>
Setting of input brownout high voltage (Source 1) <p>-</p> SNMP agent atsConfigInputBrownoutHigh_source1<p>Update: 1m</p>
The internal temperature (in Fahrenheit) <p>-</p> SNMP agent atsMeasureTemperatureF<p>Update: 1m</p>
The internal temperature (in Celsius) <p>-</p> SNMP agent atsMeasureTemperatureC<p>Update: 5m</p>
The output current is over <p>-</p> SNMP agent atsFailureOutputOC<p>Update: 1m</p>
The input is not operable (Source 2) <p>-</p> SNMP agent atsInputFailureNotOperable_source2<p>Update: 1m</p>
The status of input relay is OPEN (Source 2) <p>-</p> SNMP agent atsInputFailureRelayOpen_source2<p>Update: 1m</p>
Setting of input brownout low voltage (Source 2) <p>-</p> SNMP agent atsConfigInputBrownoutLow_source2<p>Update: 1m</p>
The status of input SCR is SHORT (Source 2) <p>-</p> SNMP agent atsInputFailureSCRShort_source2<p>Update: 1m</p>
Set the detected delta RMS voltage of fast detected AC blackout by the comparing cycles (Source 1) <p>-</p> SNMP agent atsConfigInputMaxVoltage_source1<p>Update: 1m</p>
A voltage drop was detected (Source 1) <p>-</p> SNMP agent atsInputFailureDrop_source1<p>Update: 1m</p>
The input frequency (Source 1) <p>-</p> SNMP agent atsInputFrequency_source1<p>Update: 5m</p>
The ATS run time <p>-</p> SNMP agent atsMessureRunTime<p>Update: 5m</p>
The released date <p>-</p> SNMP agent atsIdentRelease<p>Update: 1d</p>
The input voltage (Source 2) <p>-</p> SNMP agent atsInputVoltage_source2<p>Update: 5m</p>
A voltage brownout was detected (Source 1) <p>-</p> SNMP agent atsInputFailureBrownout_source1<p>Update: 1m</p>
The status of input SCR thermal is over (Source 1) <p>-</p> SNMP agent atsInputFailureSCRThermal_source1<p>Update: 1m</p>
The status of upgrade progress <p>-</p> SNMP agent atsUpgradeProcess<p>Update: 10m</p>
The step of ATS F/W upgrade <p>-</p> SNMP agent atsUpgradeStep<p>Update: 10m</p>
The percentage of current progress (program or read) <p>-</p> SNMP agent atsUpgradePercentage<p>Update: 1m</p>
The transfered times <p>-</p> SNMP agent atsMessureTransferedTimes<p>Update: 10m</p>
The activity of source test <p>-</p> SNMP agent atsConfigTest<p>Update: 1m</p>
Set the detected time of fast detected AC blackout by the comparing cycles (Source 2) <p>-</p> SNMP agent atsConfigInputMaxTime_source2<p>Update: 1m</p>
The present date in MM/DD/YYYY text format <p>-</p> SNMP agent atsConfigTimeTextDate<p>Update: 5m</p>
Set the detected delta RMS voltage of fast detected AC blackout by the comparing cycles (Source 2) <p>-</p> SNMP agent atsConfigInputMaxVoltage_source2<p>Update: 1m</p>
The status of input relay is SHORT (Source 1) <p>-</p> SNMP agent atsInputFailureRelayShort_source1<p>Update: 1m</p>
The status of input SCR is SHORT (Source 1) <p>-</p> SNMP agent atsInputFailureSCRShort_source1<p>Update: 1m</p>
Device F/W version <p>-</p> SNMP agent atsIdentFWVersion<p>Update: 1d</p>
The input voltage (Source 1) <p>-</p> SNMP agent atsInputVoltage_source1<p>Update: 5m</p>
The RTC timer value (since 1/1/2000 00:00:00) <p>-</p> SNMP agent atsConfigTimeRTC<p>Update: 10m</p>
The status of input SCR thermal is over (Source 2) <p>-</p> SNMP agent atsInputFailureSCRThermal_source2<p>Update: 1m</p>
The link status of ModBUS communication to ATS device <p>-</p> SNMP agent atsAgentModbusLink<p>Update: 5m</p>

Triggers

There are no triggers in this template.

Eaton ATS 230V 30A

Overview

Template for Eaton ATS 30A

64 Items
25 Triggers

Author

Peter Stanke

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
The status of input relay is OPEN (Source 2) <p>-</p> SNMP agent atsInputFailureRelayOpen_source2<p>Update: 1m</p>
The present time in hh:mm:ss text format <p>-</p> SNMP agent atsConfigTimeTextTime<p>Update: 5m</p>
Set the detected time of fast detected AC blackout by the comparing cycles (Source 1) <p>-</p> SNMP agent atsConfigInputMaxTime_source1<p>Update: 1m</p>
A voltage brownout was detected (Source 2) <p>-</p> SNMP agent atsInputFailureBrownout_source2<p>Update: 1m</p>
Setting of input brownout low voltage (Source 1) <p>-</p> SNMP agent atsConfigInputBrownoutLow_source1<p>Update: 1m</p>
The ambient temperature is over <p>-</p> SNMP agent atsFailureOverTemperature<p>Update: 1m</p>
Set the detected time of fast detected AC blackout by the comparing cycles (Source 2) <p>-</p> SNMP agent atsConfigInputMaxTime_source2<p>Update: 1m</p>
Device model name <p>-</p> SNMP agent atsIdentModel<p>Update: 1d</p>
The input frequency (Source 1) <p>-</p> SNMP agent atsInputFrequency_source1<p>Update: 5m</p>
The status of input SCR is OPEN (Source 1) <p>-</p> SNMP agent atsInputFailureSCROpen_source1<p>Update: 1m</p>
The firmware version of SNMP-Agent <p>-</p> SNMP agent atsAgentVersion<p>Update: 1d</p>
The status of input SCR is SHORT (Source 2) <p>-</p> SNMP agent atsInputFailureSCRShort_source2<p>Update: 1m</p>
The AC Blackout Sensitivity <p>-</p> SNMP agent atsConfigSensitivity<p>Update: 1m</p>
The status of input SCR thermal is over (Source 1) <p>-</p> SNMP agent atsInputFailureSCRThermal_source1<p>Update: 1m</p>
Set the detected delta RMS voltage of fast detected AC blackout by the comparing cycles (Source 2) <p>-</p> SNMP agent atsConfigInputMaxVoltage_source2<p>Update: 1m</p>
There is no output <p>-</p> SNMP agent atsFailureNoOutput<p>Update: 1m</p>
The relay, SCR and thermal switch fail <p>-</p> SNMP agent atsFailureSwitchFault<p>Update: 1m</p>
The input frequency (Source 2) <p>-</p> SNMP agent atsInputFrequency_source2<p>Update: 5m</p>
The status of input SCR thermal is over (Source 2) <p>-</p> SNMP agent atsInputFailureSCRThermal_source2<p>Update: 1m</p>
The released date <p>-</p> SNMP agent atsIdentRelease<p>Update: 1d</p>
The status of input relay is SHORT (Source 1) <p>-</p> SNMP agent atsInputFailureRelayShort_source1<p>Update: 1m</p>
Device F/W version <p>-</p> SNMP agent atsIdentFWVersion<p>Update: 1d</p>
Setting of input recovered time (Source 1) <p>-</p> SNMP agent atsConfigInputRecover_source1<p>Update: 1m</p>
The prefered source <p>-</p> SNMP agent atsConfigPreferred<p>Update: 5m</p>
The output voltage <p>-</p> SNMP agent atsOutputVoltage<p>Update: 5m</p>
The transfered times <p>-</p> SNMP agent atsMessureTransferedTimes<p>Update: 10m</p>
Set the detected delta RMS voltage of fast detected AC blackout by the comparing cycles (Source 1) <p>-</p> SNMP agent atsConfigInputMaxVoltage_source1<p>Update: 1m</p>
The step of ATS F/W upgrade <p>-</p> SNMP agent atsUpgradeStep<p>Update: 10m</p>
The input frequency is out of range (Source 2) <p>-</p> SNMP agent atsInputFailureFrequency_source2<p>Update: 1m</p>
The input voltage (Source 2) <p>-</p> SNMP agent atsInputVoltage_source2<p>Update: 5m</p>
The status of input SCR is OPEN (Source 2) <p>-</p> SNMP agent atsInputFailureSCROpen_source2<p>Update: 1m</p>
A voltage drop was detected (Source 2) <p>-</p> SNMP agent atsInputFailureDrop_source2<p>Update: 1m</p>
The output current is over <p>-</p> SNMP agent atsFailureOutputOC<p>Update: 1m</p>
Internal auxiliary power is reported as failure (Source 2) <p>-</p> SNMP agent atsInputFailureAuxPower_source2<p>Update: 1m</p>
The input is not operable (Source 2) <p>-</p> SNMP agent atsInputFailureNotOperable_source2<p>Update: 1m</p>
Internal auxiliary power is reported as failure (Source 1) <p>-</p> SNMP agent atsInputFailureAuxPower_source1<p>Update: 1m</p>
The input frequency is out of range (Source 1) <p>-</p> SNMP agent atsInputFailureFrequency_source1<p>Update: 1m</p>
The status of input relay is OPEN (Source 1) <p>-</p> SNMP agent atsInputFailureRelayOpen_source1<p>Update: 1m</p>
The manufacturer name of SNMP-Agent <p>-</p> SNMP agent atsAgentManufacturer<p>Update: 5m</p>
The internal temperature (in Fahrenheit) <p>-</p> SNMP agent atsMeasureTemperatureF<p>Update: 1m</p>
The output current <p>-</p> SNMP agent atsOutputCurrent<p>Update: 5m</p>
Device ID codes <p>-</p> SNMP agent atsIdentIDCodes<p>Update: 1d</p>
The percentage of current progress (program or read) <p>-</p> SNMP agent atsUpgradePercentage<p>Update: 1m</p>
The present date in MM/DD/YYYY text format <p>-</p> SNMP agent atsConfigTimeTextDate<p>Update: 5m</p>
The ATS run time <p>-</p> SNMP agent atsMessureRunTime<p>Update: 5m</p>
The internal temperature (in Celsius) <p>-</p> SNMP agent atsMeasureTemperatureC<p>Update: 5m</p>
The input is not operable (Source 1) <p>-</p> SNMP agent atsInputFailureNotOperable_source1<p>Update: 1m</p>
Device serial number <p>-</p> SNMP agent atsIdentSerialNumber<p>Update: 1d</p>
Setting of input trip voltage (Source 1) <p>-</p> SNMP agent atsConfigInputTrip_source1<p>Update: 1m</p>
A voltage brownout was detected (Source 1) <p>-</p> SNMP agent atsInputFailureBrownout_source1<p>Update: 1m</p>
Setting of input trip voltage (Source 2) <p>-</p> SNMP agent atsConfigInputTrip_source2<p>Update: 1m</p>
The status of input SCR is SHORT (Source 1) <p>-</p> SNMP agent atsInputFailureSCRShort_source1<p>Update: 1m</p>
A voltage drop was detected (Source 1) <p>-</p> SNMP agent atsInputFailureDrop_source1<p>Update: 1m</p>
The status of upgrade progress <p>-</p> SNMP agent atsUpgradeProcess<p>Update: 10m</p>
The input voltage (Source 1) <p>-</p> SNMP agent atsInputVoltage_source1<p>Update: 5m</p>
Setting of input recovered time (Source 2) <p>-</p> SNMP agent atsConfigInputRecover_source2<p>Update: 1m</p>
Setting of input brownout high voltage (Source 2) <p>-</p> SNMP agent atsConfigInputBrownoutHigh_source2<p>Update: 1m</p>
The status of input relay is SHORT (Source 2) <p>-</p> SNMP agent atsInputFailureRelayShort_source2<p>Update: 1m</p>
The operation mode <p>-</p> SNMP agent atsMessureOperationMode<p>Update: 1m</p>
The link status of ModBUS communication to ATS device <p>-</p> SNMP agent atsAgentModbusLink<p>Update: 5m</p>
Setting of input brownout low voltage (Source 2) <p>-</p> SNMP agent atsConfigInputBrownoutLow_source2<p>Update: 1m</p>
Setting of input brownout high voltage (Source 1) <p>-</p> SNMP agent atsConfigInputBrownoutHigh_source1<p>Update: 1m</p>
The RTC timer value (since 1/1/2000 00:00:00) <p>-</p> SNMP agent atsConfigTimeRTC<p>Update: 10m</p>
The activity of source test <p>-</p> SNMP agent atsConfigTest<p>Update: 1m</p>

Triggers

There are no triggers in this template.

Eaton ATS 230V 30A

Overview

Template for Eaton ATS 30A

64 Items
25 Triggers

Author

Peter Stanke

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
The status of input relay is OPEN (Source 2) <p>-</p> SNMP agent atsInputFailureRelayOpen_source2<p>Update: 1m</p>
The present time in hh:mm:ss text format <p>-</p> SNMP agent atsConfigTimeTextTime<p>Update: 5m</p>
Set the detected time of fast detected AC blackout by the comparing cycles (Source 1) <p>-</p> SNMP agent atsConfigInputMaxTime_source1<p>Update: 1m</p>
A voltage brownout was detected (Source 2) <p>-</p> SNMP agent atsInputFailureBrownout_source2<p>Update: 1m</p>
Setting of input brownout low voltage (Source 1) <p>-</p> SNMP agent atsConfigInputBrownoutLow_source1<p>Update: 1m</p>
The ambient temperature is over <p>-</p> SNMP agent atsFailureOverTemperature<p>Update: 1m</p>
Set the detected time of fast detected AC blackout by the comparing cycles (Source 2) <p>-</p> SNMP agent atsConfigInputMaxTime_source2<p>Update: 1m</p>
Device model name <p>-</p> SNMP agent atsIdentModel<p>Update: 1d</p>
The input frequency (Source 1) <p>-</p> SNMP agent atsInputFrequency_source1<p>Update: 5m</p>
The status of input SCR is OPEN (Source 1) <p>-</p> SNMP agent atsInputFailureSCROpen_source1<p>Update: 1m</p>
The firmware version of SNMP-Agent <p>-</p> SNMP agent atsAgentVersion<p>Update: 1d</p>
The status of input SCR is SHORT (Source 2) <p>-</p> SNMP agent atsInputFailureSCRShort_source2<p>Update: 1m</p>
The AC Blackout Sensitivity <p>-</p> SNMP agent atsConfigSensitivity<p>Update: 1m</p>
The status of input SCR thermal is over (Source 1) <p>-</p> SNMP agent atsInputFailureSCRThermal_source1<p>Update: 1m</p>
Set the detected delta RMS voltage of fast detected AC blackout by the comparing cycles (Source 2) <p>-</p> SNMP agent atsConfigInputMaxVoltage_source2<p>Update: 1m</p>
There is no output <p>-</p> SNMP agent atsFailureNoOutput<p>Update: 1m</p>
The relay, SCR and thermal switch fail <p>-</p> SNMP agent atsFailureSwitchFault<p>Update: 1m</p>
The input frequency (Source 2) <p>-</p> SNMP agent atsInputFrequency_source2<p>Update: 5m</p>
The status of input SCR thermal is over (Source 2) <p>-</p> SNMP agent atsInputFailureSCRThermal_source2<p>Update: 1m</p>
The released date <p>-</p> SNMP agent atsIdentRelease<p>Update: 1d</p>
The status of input relay is SHORT (Source 1) <p>-</p> SNMP agent atsInputFailureRelayShort_source1<p>Update: 1m</p>
Device F/W version <p>-</p> SNMP agent atsIdentFWVersion<p>Update: 1d</p>
Setting of input recovered time (Source 1) <p>-</p> SNMP agent atsConfigInputRecover_source1<p>Update: 1m</p>
The prefered source <p>-</p> SNMP agent atsConfigPreferred<p>Update: 5m</p>
The output voltage <p>-</p> SNMP agent atsOutputVoltage<p>Update: 5m</p>
The transfered times <p>-</p> SNMP agent atsMessureTransferedTimes<p>Update: 10m</p>
Set the detected delta RMS voltage of fast detected AC blackout by the comparing cycles (Source 1) <p>-</p> SNMP agent atsConfigInputMaxVoltage_source1<p>Update: 1m</p>
The step of ATS F/W upgrade <p>-</p> SNMP agent atsUpgradeStep<p>Update: 10m</p>
The input frequency is out of range (Source 2) <p>-</p> SNMP agent atsInputFailureFrequency_source2<p>Update: 1m</p>
The input voltage (Source 2) <p>-</p> SNMP agent atsInputVoltage_source2<p>Update: 5m</p>
The status of input SCR is OPEN (Source 2) <p>-</p> SNMP agent atsInputFailureSCROpen_source2<p>Update: 1m</p>
A voltage drop was detected (Source 2) <p>-</p> SNMP agent atsInputFailureDrop_source2<p>Update: 1m</p>
The output current is over <p>-</p> SNMP agent atsFailureOutputOC<p>Update: 1m</p>
Internal auxiliary power is reported as failure (Source 2) <p>-</p> SNMP agent atsInputFailureAuxPower_source2<p>Update: 1m</p>
The input is not operable (Source 2) <p>-</p> SNMP agent atsInputFailureNotOperable_source2<p>Update: 1m</p>
Internal auxiliary power is reported as failure (Source 1) <p>-</p> SNMP agent atsInputFailureAuxPower_source1<p>Update: 1m</p>
The input frequency is out of range (Source 1) <p>-</p> SNMP agent atsInputFailureFrequency_source1<p>Update: 1m</p>
The status of input relay is OPEN (Source 1) <p>-</p> SNMP agent atsInputFailureRelayOpen_source1<p>Update: 1m</p>
The manufacturer name of SNMP-Agent <p>-</p> SNMP agent atsAgentManufacturer<p>Update: 5m</p>
The internal temperature (in Fahrenheit) <p>-</p> SNMP agent atsMeasureTemperatureF<p>Update: 1m</p>
The output current <p>-</p> SNMP agent atsOutputCurrent<p>Update: 5m</p>
Device ID codes <p>-</p> SNMP agent atsIdentIDCodes<p>Update: 1d</p>
The percentage of current progress (program or read) <p>-</p> SNMP agent atsUpgradePercentage<p>Update: 1m</p>
The present date in MM/DD/YYYY text format <p>-</p> SNMP agent atsConfigTimeTextDate<p>Update: 5m</p>
The ATS run time <p>-</p> SNMP agent atsMessureRunTime<p>Update: 5m</p>
The internal temperature (in Celsius) <p>-</p> SNMP agent atsMeasureTemperatureC<p>Update: 5m</p>
The input is not operable (Source 1) <p>-</p> SNMP agent atsInputFailureNotOperable_source1<p>Update: 1m</p>
Device serial number <p>-</p> SNMP agent atsIdentSerialNumber<p>Update: 1d</p>
Setting of input trip voltage (Source 1) <p>-</p> SNMP agent atsConfigInputTrip_source1<p>Update: 1m</p>
A voltage brownout was detected (Source 1) <p>-</p> SNMP agent atsInputFailureBrownout_source1<p>Update: 1m</p>
Setting of input trip voltage (Source 2) <p>-</p> SNMP agent atsConfigInputTrip_source2<p>Update: 1m</p>
The status of input SCR is SHORT (Source 1) <p>-</p> SNMP agent atsInputFailureSCRShort_source1<p>Update: 1m</p>
A voltage drop was detected (Source 1) <p>-</p> SNMP agent atsInputFailureDrop_source1<p>Update: 1m</p>
The status of upgrade progress <p>-</p> SNMP agent atsUpgradeProcess<p>Update: 10m</p>
The input voltage (Source 1) <p>-</p> SNMP agent atsInputVoltage_source1<p>Update: 5m</p>
Setting of input recovered time (Source 2) <p>-</p> SNMP agent atsConfigInputRecover_source2<p>Update: 1m</p>
Setting of input brownout high voltage (Source 2) <p>-</p> SNMP agent atsConfigInputBrownoutHigh_source2<p>Update: 1m</p>
The status of input relay is SHORT (Source 2) <p>-</p> SNMP agent atsInputFailureRelayShort_source2<p>Update: 1m</p>
The operation mode <p>-</p> SNMP agent atsMessureOperationMode<p>Update: 1m</p>
The link status of ModBUS communication to ATS device <p>-</p> SNMP agent atsAgentModbusLink<p>Update: 5m</p>
Setting of input brownout low voltage (Source 2) <p>-</p> SNMP agent atsConfigInputBrownoutLow_source2<p>Update: 1m</p>
Setting of input brownout high voltage (Source 1) <p>-</p> SNMP agent atsConfigInputBrownoutHigh_source1<p>Update: 1m</p>
The RTC timer value (since 1/1/2000 00:00:00) <p>-</p> SNMP agent atsConfigTimeRTC<p>Update: 10m</p>
The activity of source test <p>-</p> SNMP agent atsConfigTest<p>Update: 1m</p>

Triggers

There are no triggers in this template.