Available versions




Eaton ATS 230V 16A

Overview

Template for Eaton ATS 16A

46 Items
19 Triggers

Author

Peter Stanke

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
The output voltage config <p>-</p> SNMP agent ats2ConfigOutputVoltage<p>Update: 2m</p>
The status of input frequency (Source 1) <p>-</p> SNMP agent ats2InputStatusFrequency_source1<p>Update: 1m</p>
Short circuit status <p>-</p> SNMP agent ats2StatusShortCircuit<p>Update: 1m</p>
The output current <p>-</p> SNMP agent ats2OutputCurrent<p>Update: 5m</p>
The internal fault status of input (Source 1) <p>-</p> SNMP agent ats2InputStatusInternalFailure_source1<p>Update: 1m</p>
The dephasing in between Source 1 and Source 2 <p>-</p> SNMP agent ats2InputDephasing<p>Update: 5m</p>
The input voltage (Source 1) <p>-</p> SNMP agent ats2InputVoltage_source1<p>Update: 5m</p>
The input voltage (Source 2) <p>-</p> SNMP agent ats2InputVoltage_source2<p>Update: 5m</p>
The release date <p>-</p> SNMP agent ats2IdentRelease<p>Update: 1d</p>
The summarized status of input AC flow (Source 2) <p>-</p> SNMP agent ats2InputStatusGood_source2<p>Update: 1m</p>
The status of input voltage (Source 2) <p>-</p> SNMP agent ats2InputStatusVoltage_source2<p>Update: 1m</p>
The operation mode <p>-</p> SNMP agent ats2OperationMode<p>Update: 1m</p>
The input frequency (Source 2) <p>-</p> SNMP agent ats2InputFrequency_source2<p>Update: 5m</p>
The AC Blackout Sensitivity <p>-</p> SNMP agent ats2ConfigSensitivity<p>Update: 2m</p>
The status of input voltage (Source 1) <p>-</p> SNMP agent ats2InputStatusVoltage_source1<p>Update: 1m</p>
Setting of input brownout high voltage <p>-</p> SNMP agent ats2ConfigBrownoutHigh<p>Update: 2m</p>
Setting of input brownout low derated voltage <p>-</p> SNMP agent ats2ConfigBrownoutLowDerated<p>Update: 2m</p>
The input voltage rating <p>-</p> SNMP agent ats2ConfigInputVoltageRating<p>Update: 2m</p>
The manufacturer name <p>-</p> SNMP agent ats2IdentManufacturer<p>Update: 1d</p>
The over temperature status <p>-</p> SNMP agent ats2StatusOverTemperature<p>Update: 1m</p>
Output fault <p>-</p> SNMP agent ats2StatusInternalFailure<p>Update: 1m</p>
Device part number <p>-</p> SNMP agent ats2IdentPartNumber<p>Update: 1d</p>
The preferred source <p>-</p> SNMP agent ats2ConfigPreferred<p>Update: 2m</p>
The input frequency (Source 1) <p>-</p> SNMP agent ats2InputFrequency_source1<p>Update: 5m</p>
Hysteresis between loss point and comeback point <p>-</p> SNMP agent ats2ConfigHysteresisVoltage<p>Update: 2m</p>
Device F/W version <p>-</p> SNMP agent ats2IdentFWVersion<p>Update: 1d</p>
Communication failure status <p>-</p> SNMP agent ats2StatusCommunicationLost<p>Update: 1m</p>
Communication Card F/W version <p>-</p> SNMP agent ats2IdentAgentVersion<p>Update: 1d</p>
The output voltage <p>-</p> SNMP agent ats2OutputVoltage<p>Update: 5m</p>
The input frequency rating <p>-</p> SNMP agent ats2ConfigInputFrequencyRating<p>Update: 2m</p>
Setting of input brownout low voltage <p>-</p> SNMP agent ats2ConfigBrownoutLow<p>Update: 2m</p>
The present date in MM/DD/YYYY text format <p>-</p> SNMP agent ats2ConfigTimeTextDate<p>Update: 5m</p>
The output overload status <p>-</p> SNMP agent ats2StatusOverload<p>Update: 1m</p>
behavior configuration when transfering from one source to other source not synchronized <p>-</p> SNMP agent ats2ConfigTransferMode<p>Update: 2m</p>
The status of transfer test <p>-</p> SNMP agent ats2ConfigTransferTest<p>Update: 2m</p>
The summarized status of input AC flow (Source 1) <p>-</p> SNMP agent ats2InputStatusGood_source1<p>Update: 1m</p>
The status of input relay (Source 2) <p>-</p> SNMP agent ats2InputStatusUsed_source2<p>Update: 1m</p>
The dephasing status in between Source 1 and Source 2 <p>-</p> SNMP agent ats2InputStatusDephasing<p>Update: 5m</p>
Configuration failure status <p>-</p> SNMP agent ats2StatusConfigurationFailure<p>Update: 1m</p>
The internal fault status of input (Source 2) <p>-</p> SNMP agent ats2InputStatusInternalFailure_source2<p>Update: 1m</p>
Output powered status <p>-</p> SNMP agent ats2StatusOutput<p>Update: 1m</p>
Device serial number <p>-</p> SNMP agent ats2IdentSerialNumber<p>Update: 1d</p>
The status of input relay (Source 1) <p>-</p> SNMP agent ats2InputStatusUsed_source1<p>Update: 1m</p>
The status of input frequency (Source 2) <p>-</p> SNMP agent ats2InputStatusFrequency_source2<p>Update: 1m</p>
The present time in hh:mm:ss text format <p>-</p> SNMP agent ats2ConfigTimeTextTime<p>Update: 5m</p>
Device model name <p>-</p> SNMP agent ats2IdentModel<p>Update: 1d</p>

Triggers

There are no triggers in this template.

Eaton ATS 230V 16A

Overview

Template for Eaton ATS 16A

46 Items
19 Triggers

Author

Peter Stanke

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
Setting of input brownout high voltage <p>-</p> SNMP agent ats2ConfigBrownoutHigh<p>Update: 2m</p>
The input voltage (Source 1) <p>-</p> SNMP agent ats2InputVoltage_source1<p>Update: 5m</p>
The summarized status of input AC flow (Source 1) <p>-</p> SNMP agent ats2InputStatusGood_source1<p>Update: 1m</p>
The summarized status of input AC flow (Source 2) <p>-</p> SNMP agent ats2InputStatusGood_source2<p>Update: 1m</p>
The internal fault status of input (Source 1) <p>-</p> SNMP agent ats2InputStatusInternalFailure_source1<p>Update: 1m</p>
The internal fault status of input (Source 2) <p>-</p> SNMP agent ats2InputStatusInternalFailure_source2<p>Update: 1m</p>
The status of input relay (Source 1) <p>-</p> SNMP agent ats2InputStatusUsed_source1<p>Update: 1m</p>
The status of input relay (Source 2) <p>-</p> SNMP agent ats2InputStatusUsed_source2<p>Update: 1m</p>
The status of input voltage (Source 1) <p>-</p> SNMP agent ats2InputStatusVoltage_source1<p>Update: 1m</p>
The status of input voltage (Source 2) <p>-</p> SNMP agent ats2InputStatusVoltage_source2<p>Update: 1m</p>
The input voltage (Source 2) <p>-</p> SNMP agent ats2InputVoltage_source2<p>Update: 5m</p>
The status of input frequency (Source 1) <p>-</p> SNMP agent ats2InputStatusFrequency_source1<p>Update: 1m</p>
The operation mode <p>-</p> SNMP agent ats2OperationMode<p>Update: 1m</p>
The output current <p>-</p> SNMP agent ats2OutputCurrent<p>Update: 5m</p>
The output voltage <p>-</p> SNMP agent ats2OutputVoltage<p>Update: 5m</p>
Communication failure status <p>-</p> SNMP agent ats2StatusCommunicationLost<p>Update: 1m</p>
Configuration failure status <p>-</p> SNMP agent ats2StatusConfigurationFailure<p>Update: 1m</p>
Output fault <p>-</p> SNMP agent ats2StatusInternalFailure<p>Update: 1m</p>
Output powered status <p>-</p> SNMP agent ats2StatusOutput<p>Update: 1m</p>
The output overload status <p>-</p> SNMP agent ats2StatusOverload<p>Update: 1m</p>
The over temperature status <p>-</p> SNMP agent ats2StatusOverTemperature<p>Update: 1m</p>
The status of input frequency (Source 2) <p>-</p> SNMP agent ats2InputStatusFrequency_source2<p>Update: 1m</p>
The dephasing status in between Source 1 and Source 2 <p>-</p> SNMP agent ats2InputStatusDephasing<p>Update: 5m</p>
Setting of input brownout low voltage <p>-</p> SNMP agent ats2ConfigBrownoutLow<p>Update: 2m</p>
behavior configuration when transfering from one source to other source not synchronized <p>-</p> SNMP agent ats2ConfigTransferMode<p>Update: 2m</p>
Setting of input brownout low derated voltage <p>-</p> SNMP agent ats2ConfigBrownoutLowDerated<p>Update: 2m</p>
Hysteresis between loss point and comeback point <p>-</p> SNMP agent ats2ConfigHysteresisVoltage<p>Update: 2m</p>
The input frequency rating <p>-</p> SNMP agent ats2ConfigInputFrequencyRating<p>Update: 2m</p>
The input voltage rating <p>-</p> SNMP agent ats2ConfigInputVoltageRating<p>Update: 2m</p>
The output voltage config <p>-</p> SNMP agent ats2ConfigOutputVoltage<p>Update: 2m</p>
The preferred source <p>-</p> SNMP agent ats2ConfigPreferred<p>Update: 2m</p>
The AC Blackout Sensitivity <p>-</p> SNMP agent ats2ConfigSensitivity<p>Update: 2m</p>
The present date in MM/DD/YYYY text format <p>-</p> SNMP agent ats2ConfigTimeTextDate<p>Update: 5m</p>
The present time in hh:mm:ss text format <p>-</p> SNMP agent ats2ConfigTimeTextTime<p>Update: 5m</p>
The status of transfer test <p>-</p> SNMP agent ats2ConfigTransferTest<p>Update: 2m</p>
The input frequency (Source 2) <p>-</p> SNMP agent ats2InputFrequency_source2<p>Update: 5m</p>
Communication Card F/W version <p>-</p> SNMP agent ats2IdentAgentVersion<p>Update: 1d</p>
Device F/W version <p>-</p> SNMP agent ats2IdentFWVersion<p>Update: 1d</p>
The manufacturer name <p>-</p> SNMP agent ats2IdentManufacturer<p>Update: 1d</p>
Device model name <p>-</p> SNMP agent ats2IdentModel<p>Update: 1d</p>
Device part number <p>-</p> SNMP agent ats2IdentPartNumber<p>Update: 1d</p>
The release date <p>-</p> SNMP agent ats2IdentRelease<p>Update: 1d</p>
Device serial number <p>-</p> SNMP agent ats2IdentSerialNumber<p>Update: 1d</p>
The dephasing in between Source 1 and Source 2 <p>-</p> SNMP agent ats2InputDephasing<p>Update: 5m</p>
The input frequency (Source 1) <p>-</p> SNMP agent ats2InputFrequency_source1<p>Update: 5m</p>
Short circuit status <p>-</p> SNMP agent ats2StatusShortCircuit<p>Update: 1m</p>

Triggers

There are no triggers in this template.

Eaton ATS 230V 16A

Overview

Template for Eaton ATS 16A

46 Items
19 Triggers

Author

Peter Stanke

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info
Setting of input brownout high voltage <p>-</p> SNMP agent ats2ConfigBrownoutHigh<p>Update: 2m</p>
The input voltage (Source 1) <p>-</p> SNMP agent ats2InputVoltage_source1<p>Update: 5m</p>
The summarized status of input AC flow (Source 1) <p>-</p> SNMP agent ats2InputStatusGood_source1<p>Update: 1m</p>
The summarized status of input AC flow (Source 2) <p>-</p> SNMP agent ats2InputStatusGood_source2<p>Update: 1m</p>
The internal fault status of input (Source 1) <p>-</p> SNMP agent ats2InputStatusInternalFailure_source1<p>Update: 1m</p>
The internal fault status of input (Source 2) <p>-</p> SNMP agent ats2InputStatusInternalFailure_source2<p>Update: 1m</p>
The status of input relay (Source 1) <p>-</p> SNMP agent ats2InputStatusUsed_source1<p>Update: 1m</p>
The status of input relay (Source 2) <p>-</p> SNMP agent ats2InputStatusUsed_source2<p>Update: 1m</p>
The status of input voltage (Source 1) <p>-</p> SNMP agent ats2InputStatusVoltage_source1<p>Update: 1m</p>
The status of input voltage (Source 2) <p>-</p> SNMP agent ats2InputStatusVoltage_source2<p>Update: 1m</p>
The input voltage (Source 2) <p>-</p> SNMP agent ats2InputVoltage_source2<p>Update: 5m</p>
The status of input frequency (Source 1) <p>-</p> SNMP agent ats2InputStatusFrequency_source1<p>Update: 1m</p>
The operation mode <p>-</p> SNMP agent ats2OperationMode<p>Update: 1m</p>
The output current <p>-</p> SNMP agent ats2OutputCurrent<p>Update: 5m</p>
The output voltage <p>-</p> SNMP agent ats2OutputVoltage<p>Update: 5m</p>
Communication failure status <p>-</p> SNMP agent ats2StatusCommunicationLost<p>Update: 1m</p>
Configuration failure status <p>-</p> SNMP agent ats2StatusConfigurationFailure<p>Update: 1m</p>
Output fault <p>-</p> SNMP agent ats2StatusInternalFailure<p>Update: 1m</p>
Output powered status <p>-</p> SNMP agent ats2StatusOutput<p>Update: 1m</p>
The output overload status <p>-</p> SNMP agent ats2StatusOverload<p>Update: 1m</p>
The over temperature status <p>-</p> SNMP agent ats2StatusOverTemperature<p>Update: 1m</p>
The status of input frequency (Source 2) <p>-</p> SNMP agent ats2InputStatusFrequency_source2<p>Update: 1m</p>
The dephasing status in between Source 1 and Source 2 <p>-</p> SNMP agent ats2InputStatusDephasing<p>Update: 5m</p>
Setting of input brownout low voltage <p>-</p> SNMP agent ats2ConfigBrownoutLow<p>Update: 2m</p>
behavior configuration when transfering from one source to other source not synchronized <p>-</p> SNMP agent ats2ConfigTransferMode<p>Update: 2m</p>
Setting of input brownout low derated voltage <p>-</p> SNMP agent ats2ConfigBrownoutLowDerated<p>Update: 2m</p>
Hysteresis between loss point and comeback point <p>-</p> SNMP agent ats2ConfigHysteresisVoltage<p>Update: 2m</p>
The input frequency rating <p>-</p> SNMP agent ats2ConfigInputFrequencyRating<p>Update: 2m</p>
The input voltage rating <p>-</p> SNMP agent ats2ConfigInputVoltageRating<p>Update: 2m</p>
The output voltage config <p>-</p> SNMP agent ats2ConfigOutputVoltage<p>Update: 2m</p>
The preferred source <p>-</p> SNMP agent ats2ConfigPreferred<p>Update: 2m</p>
The AC Blackout Sensitivity <p>-</p> SNMP agent ats2ConfigSensitivity<p>Update: 2m</p>
The present date in MM/DD/YYYY text format <p>-</p> SNMP agent ats2ConfigTimeTextDate<p>Update: 5m</p>
The present time in hh:mm:ss text format <p>-</p> SNMP agent ats2ConfigTimeTextTime<p>Update: 5m</p>
The status of transfer test <p>-</p> SNMP agent ats2ConfigTransferTest<p>Update: 2m</p>
The input frequency (Source 2) <p>-</p> SNMP agent ats2InputFrequency_source2<p>Update: 5m</p>
Communication Card F/W version <p>-</p> SNMP agent ats2IdentAgentVersion<p>Update: 1d</p>
Device F/W version <p>-</p> SNMP agent ats2IdentFWVersion<p>Update: 1d</p>
The manufacturer name <p>-</p> SNMP agent ats2IdentManufacturer<p>Update: 1d</p>
Device model name <p>-</p> SNMP agent ats2IdentModel<p>Update: 1d</p>
Device part number <p>-</p> SNMP agent ats2IdentPartNumber<p>Update: 1d</p>
The release date <p>-</p> SNMP agent ats2IdentRelease<p>Update: 1d</p>
Device serial number <p>-</p> SNMP agent ats2IdentSerialNumber<p>Update: 1d</p>
The dephasing in between Source 1 and Source 2 <p>-</p> SNMP agent ats2InputDephasing<p>Update: 5m</p>
The input frequency (Source 1) <p>-</p> SNMP agent ats2InputFrequency_source1<p>Update: 5m</p>
Short circuit status <p>-</p> SNMP agent ats2StatusShortCircuit<p>Update: 1m</p>

Triggers

There are no triggers in this template.