Template para Ubiquiti Unifi AP e Wifi
leonardog50
There are no macros links in this template.
There are no template links in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Network Interfaces | <p>-</p> | SNMP agent |
ifDescr<p>Update: 30</p> |
| Memory Discovery | <p>-</p> | SNMP agent |
memory.discovery<p>Update: 1h</p> |
| CPU Discovery | <p>HOST-RESOURCES-MIB::hrProcessorTable discovery</p> | SNMP agent |
hrProcessorLoad.discovery<p>Update: 1h</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Firmware version | <p>MIB: ENTITY-MIB</p> | SNMP agent |
system.hw.firmware<p>Update: 3600s</p> |
| Wireless outgoing drops on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, stat.tx_dropped]<p>Update: 60s</p> |
| Incoming Traffic Unicast 04 | <p>-</p> | SNMP agent |
ifInUcast.4<p>Update: 600</p> |
| Users connected to {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, user-num_sta]<p>Update: 60s</p> |
| Radio Channel Width | <p>-</p> | SNMP agent |
ubntWlStatChanWidth<p>Update: 30s</p> |
| Device location | <p>-</p> | SNMP agent |
system.location<p>Update: 1h</p> |
| Operation Status 04 | <p>-</p> | SNMP agent |
ifOperStatus.4<p>Update: 60</p> |
| Number of $2 AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, locating, count]<p>Update: 60s</p> |
| Bandwidth 01 | <p>-</p> | SNMP agent |
ifSpeed.1<p>Update: 600</p> |
| Model of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, model]<p>Update: 3600s</p> |
| Hardware model name | <p>MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system’s hardware type, software operating-system, and networking software.</p> | SNMP agent |
system.hw.model<p>Update: 3600s</p> |
| Number of $2 AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, adopted, count]<p>Update: 600s</p> |
| Wireless outgoing drops on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap,stat.tx_dropped, sum]<p>Update: 30s</p> |
| Radio CCQ | <p>-</p> | SNMP agent |
ubntWlStatCcq<p>Update: 30s</p> |
| Serial of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, serial]<p>Update: 3600</p> |
| Outgoing Traffic 03 | <p>-</p> | SNMP agent |
ifOutOctets.3<p>Update: 300</p> |
| Device uptime | <p>MIB: SNMPv2-MIB The time (in hundredths of a second) since the network management portion of the system was last re-initialized.</p> | SNMP agent |
system.uptime<p>Update: 30s</p> |
| Device UPTIME | <p>-</p> | SNMP agent |
sysUpTimeInstance<p>Update: 300</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.5<p>Update: 600</p> |
| Incoming Traffic 02 | <p>-</p> | SNMP agent |
ifInOctets.2<p>Update: 300</p> |
| Incoming Traffic No-Unicast 03 | <p>-</p> | SNMP agent |
ifInNoUcast.3<p>Update: 600</p> |
| Incoming Traffic No-Unicast 04 | <p>-</p> | SNMP agent |
ifInNoUcast.4<p>Update: 600</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.3<p>Update: 600</p> |
| Bandwidth 06 | <p>-</p> | SNMP agent |
ifSpeed.6<p>Update: 600</p> |
| Wireless outgoing traffic on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, tx_bytes, sum]<p>Update: 30s</p> |
| Operation Status 06 | <p>-</p> | SNMP agent |
ifOperStatus.6<p>Update: 60</p> |
| Operation Status 02 | <p>-</p> | SNMP agent |
ifOperStatus.2<p>Update: 60</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.4<p>Update: 600</p> |
| Clients connected to site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, num_sta, sum]<p>Update: 30s</p> |
| Wireless channel on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng-channel]<p>Update: 120s</p> |
| Device Chipset Version | <p>-</p> | SNMP agent |
ubntChipsetVersion<p>Update: 60s</p> |
| Device uptime | <p>-</p> | SNMP agent |
system.uptime[sysUpTime]<p>Update: 30s</p> |
| Bandwidth 07 | <p>-</p> | SNMP agent |
ifSpeed.7<p>Update: 600</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.7<p>Update: 600</p> |
| Wireless outgoing traffic on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, tx_bytes]<p>Update: 60s</p> |
| {#ALIAS} ‘$2’ state | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, isolated]<p>Update: 60s</p> |
| Incoming Traffic Unicast 06 | <p>-</p> | SNMP agent |
ifInUcast.6<p>Update: 600</p> |
| Interface {#IFNAME}({#IFALIAS}): Bits sent | <p>-</p> | SNMP agent |
net.if.out[ifHCOutOctets.{#SNMPINDEX}]<p>Update: 30s</p> |
| Bandwidth 04 | <p>-</p> | SNMP agent |
ifSpeed.4<p>Update: 600</p> |
| HP V1910-48G Switch JE009A | <p>-</p> | SNMP agent |
system.hw.version<p>Update: 3600s</p> |
| Incoming Traffic Unicast 01 | <p>-</p> | SNMP agent |
ifInUcast.1<p>Update: 600</p> |
| Incoming Traffic Unicast 05 | <p>-</p> | SNMP agent |
ifInUcast.5<p>Update: 600</p> |
| Device Contact Details | <p>-</p> | SNMP agent |
sysContact<p>Update: 3600</p> |
| Interface {#IFNAME}({#IFALIAS}): Speed | <p>-</p> | SNMP agent |
net.if.speed[ifHighSpeed.{#SNMPINDEX}]<p>Update: 30s</p> |
| Incoming Traffic No-Unicast 05 | <p>-</p> | SNMP agent |
ifInNoUcast.5<p>Update: 600</p> |
| Device name | <p>-</p> | SNMP agent |
system.name<p>Update: 1h</p> |
| Operation Status 07 | <p>-</p> | SNMP agent |
ifOperStatus.7<p>Update: 60</p> |
| Bandwidth 05 | <p>-</p> | SNMP agent |
ifSpeed.5<p>Update: 600</p> |
| Radio RSSI | <p>-</p> | SNMP agent |
ubntWlStatRssi<p>Update: 30s</p> |
| Operating system | <p>-</p> | SNMP agent |
system.sw.os<p>Update: 3600s</p> |
| Radio Chain Mask | <p>-</p> | SNMP agent |
ubntRadioChainmask<p>Update: 30s</p> |
| Operation Status 01 | <p>-</p> | SNMP agent |
ifOperStatus.1<p>Update: 60</p> |
| Outgoing Traffic 05 | <p>-</p> | SNMP agent |
ifOutOctets.5<p>Update: 300</p> |
| Outgoing Traffic 07 | <p>-</p> | SNMP agent |
ifOutOctets.7<p>Update: 300</p> |
| Radio Count Stations | <p>-</p> | SNMP agent |
ubntWlStatStaCount<p>Update: 30s</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.2<p>Update: 600</p> |
| Outgoing Traffic 06 | <p>-</p> | SNMP agent |
ifOutOctets.6<p>Update: 300</p> |
| Incoming Traffic 03 | <p>-</p> | SNMP agent |
ifInOctets.3<p>Update: 300</p> |
| AirMax Enabled | <p>-</p> | SNMP agent |
ubntAirMaxEnabled<p>Update: 30s</p> |
| Device description | <p>-</p> | SNMP agent |
system.descr<p>Update: 1h</p> |
| Incoming Traffic Unicast 02 | <p>-</p> | SNMP agent |
ifInUcast.2<p>Update: 600</p> |
| Incoming Traffic 05 | <p>-</p> | SNMP agent |
ifInOctets.5<p>Update: 300</p> |
| Incoming Traffic Unicast 03 | <p>-</p> | SNMP agent |
ifInUcast.3<p>Update: 600</p> |
| TX retries on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng_tx_retries]<p>Update: 60s</p> |
| Incoming Traffic No-Unicast 02 | <p>-</p> | SNMP agent |
ifInNoUcast.2<p>Update: 600</p> |
| Wireless incoming traffic of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, rx_bytes]<p>Update: 60s</p> |
| Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 300</p> |
| Incoming Traffic 04 | <p>-</p> | SNMP agent |
ifInOctets.4<p>Update: 300</p> |
| SNMP traps (fallback) | <p>-</p> | SNMP trap |
snmptrap.fallback<p>Update: 0</p> |
| Clients connected to {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, num_sta]<p>Update: 60s</p> |
| Radio Frequency | <p>-</p> | SNMP agent |
ubntRadioFreq<p>Update: 30s</p> |
| Wireless incoming traffic of site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, rx_bytes, sum]<p>Update: 30s</p> |
| Operation Status 03 | <p>-</p> | SNMP agent |
ifOperStatus.3<p>Update: 60</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.1<p>Update: 600</p> |
| Radio Rx Rate | <p>-</p> | SNMP agent |
ubntWlStatRxRate<p>Update: 30s</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.6<p>Update: 600</p> |
| Number of $2 AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, isolated, count]<p>Update: 60s</p> |
| Number of all AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, items_num, count]<p>Update: 3600s</p> |
| Number of WLANs on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[wlan, items_num, count]<p>Update: 60s</p> |
| Radio Tx Rate | <p>-</p> | SNMP agent |
ubntWlStatTxRate<p>Update: 30s</p> |
| Bandwidth 02 | <p>-</p> | SNMP agent |
ifSpeed.2<p>Update: 600</p> |
| Incoming Traffic 06 | <p>-</p> | SNMP agent |
ifInOctets.6<p>Update: 300</p> |
| Incoming Traffic 07 | <p>-</p> | SNMP agent |
ifInOctets.7<p>Update: 300</p> |
| Radio Noise | <p>-</p> | SNMP agent |
ubntWlStatNoiseFloor<p>Update: 30s</p> |
| Radio TX Power | <p>-</p> | SNMP agent |
ubntRadioTxPower<p>Update: 30s</p> |
| AirMax Quality | <p>-</p> | SNMP agent |
ubntAirMaxQuality<p>Update: 30s</p> |
| Outgoing Traffic 02 | <p>-</p> | SNMP agent |
ifOutOctets.2<p>Update: 300</p> |
| CPU utilization | <p>MIB: MY-PROCESS-MIB CPU utilization in %</p> | SNMP agent |
system.cpu.util[myCPUUtilization5Min.0]<p>Update: 180s</p> |
| Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 3600</p> |
| Wireless power on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng-tx_power]<p>Update: 120s</p> |
| Outgoing Traffic 01 | <p>-</p> | SNMP agent |
ifOutOctets.1<p>Update: 300</p> |
| Operation Status 05 | <p>-</p> | SNMP agent |
ifOperStatus.5<p>Update: 60</p> |
| Incoming Traffic Unicast 07 | <p>-</p> | SNMP agent |
ifInUcast.7<p>Update: 600</p> |
| Incoming Traffic No-Unicast 06 | <p>-</p> | SNMP agent |
ifInNoUcast.6<p>Update: 600</p> |
| Firmware of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, version]<p>Update: 3600s</p> |
| Guests connected to {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, guest-num_sta]<p>Update: 60s</p> |
| Interface {#IFNAME}({#IFALIAS}): Bits received | <p>-</p> | SNMP agent |
net.if.in[ifHCInOctets.{#SNMPINDEX}]<p>Update: 30s</p> |
| Guests connected to site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, guest-num_sta, sum]<p>Update: 60s</p> |
| {#ALIAS} ‘$2’ state | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, adopted]<p>Update: 600s</p> |
| AirMax Capacity | <p>-</p> | SNMP agent |
ubntAirMaxCapacity<p>Update: 30s</p> |
| TX timeout on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng_ast_txto]<p>Update: 60s</p> |
| Bandwidth 03 | <p>-</p> | SNMP agent |
ifSpeed.3<p>Update: 600</p> |
| Incoming Traffic 01 | <p>-</p> | SNMP agent |
ifInOctets.1<p>Update: 300</p> |
| Users connected to site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, user-num_sta, sum]<p>Update: 60s</p> |
| Radio Mode | <p>-</p> | SNMP agent |
ubntRadioMode<p>Update: 30s</p> |
| SNMP availability | <p>-</p> | Zabbix internal |
zabbix[host,snmp,available]<p>Update: 1m</p> |
| Incoming Traffic No-Unicast 07 | <p>-</p> | SNMP agent |
ifInNoUcast.7<p>Update: 600</p> |
| Outgoing Traffic 04 | <p>-</p> | SNMP agent |
ifOutOctets.4<p>Update: 300</p> |
| Radio Signal | <p>-</p> | SNMP agent |
ubntWlStatSignal<p>Update: 30s</p> |
| Incoming Traffic No-Unicast 01 | <p>-</p> | SNMP agent |
ifInNoUcast.1<p>Update: 600</p> |
| Admin status of interface $1 | <p>-</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Alias of interface $1 | <p>-</p> | SNMP agent |
ifAlias[{#SNMPVALUE}]<p>Update: 3600s</p><p>LLD</p> |
| Description of interface $1 | <p>-</p> | SNMP agent |
ifDescr[{#SNMPVALUE}]<p>Update: 3600s</p><p>LLD</p> |
| Inbound errors on interface $1 | <p>-</p> | SNMP agent |
ifInErrors[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Incoming traffic on interface $1 | <p>-</p> | SNMP agent |
ifInOctets[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Operational status of interface $1 | <p>-</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Outbound errors on interface $1 | <p>-</p> | SNMP agent |
ifOutErrors[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Outgoing traffic on interface $1 | <p>-</p> | SNMP agent |
ifOutOctets[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Speed of interface $1 | <p>-</p> | SNMP agent |
ifSpeed[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| #{#SNMPINDEX}: Memory utilization | <p>-</p> | Calculated |
vm.memory.pused[memoryUsedPercentage.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Total memory | <p>-</p> | Calculated |
vm.memory.total[memoryTotal.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Total memory in units | <p>-</p> | SNMP agent |
vm.memory.units.total[hrStorageSize.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Used memory in units | <p>-</p> | SNMP agent |
vm.memory.units.used[hrStorageUsed.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Memory units | <p>-</p> | SNMP agent |
vm.memory.units[hrStorageAllocationUnits.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Used memory | <p>-</p> | Calculated |
vm.memory.used[memoryUsed.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: CPU utilization | <p>-</p> | SNMP agent |
system.cpu.util[hrProcessorLoad.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| #{#SNMPINDEX}: High CPU utilization | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: {Ubiquiti Unifi AP LR SNMPv1:system.cpu.util[hrProcessorLoad.{#SNMPINDEX}].avg(5m)}>{$CPU_UTIL_MAX}</p><p>Recovery expression: </p> | average |
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} | <p>-</p> | <p>Expression: {Ubiquiti Unifi AP LR SNMPv1:ifOperStatus[{#SNMPVALUE}].diff(0)}=1</p><p>Recovery expression: </p> | information |
| #{#SNMPINDEX}: High memory utilization | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: {Ubiquiti Unifi AP LR SNMPv1:vm.memory.pused[memoryUsedPercentage.{#SNMPINDEX}].avg(5m)}>{$MEMORY_UTIL_MAX}</p><p>Recovery expression: </p> | average |
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} (LLD) | <p>-</p> | <p>Expression: {Ubiquiti Unifi AP LR SNMPv1:ifOperStatus[{#SNMPVALUE}].diff(0)}=1</p><p>Recovery expression: </p> | information |
| #{#SNMPINDEX}: High memory utilization (LLD) | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: {Ubiquiti Unifi AP LR SNMPv1:vm.memory.pused[memoryUsedPercentage.{#SNMPINDEX}].avg(5m)}>{$MEMORY_UTIL_MAX}</p><p>Recovery expression: </p> | average |
| #{#SNMPINDEX}: High CPU utilization (LLD) | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: {Ubiquiti Unifi AP LR SNMPv1:system.cpu.util[hrProcessorLoad.{#SNMPINDEX}].avg(5m)}>{$CPU_UTIL_MAX}</p><p>Recovery expression: </p> | average |
Template para Ubiquiti Unifi AP e Wifi
leonardog50
There are no macros links in this template.
There are no template links in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Network Interfaces | <p>-</p> | SNMP agent |
ifDescr<p>Update: 30</p> |
| Memory Discovery | <p>-</p> | SNMP agent |
memory.discovery<p>Update: 1h</p> |
| CPU Discovery | <p>HOST-RESOURCES-MIB::hrProcessorTable discovery</p> | SNMP agent |
hrProcessorLoad.discovery<p>Update: 1h</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Incoming Traffic No-Unicast 02 | <p>-</p> | SNMP agent |
ifInNoUcast.2<p>Update: 600</p> |
| Guests connected to site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, guest-num_sta, sum]<p>Update: 60s</p> |
| {#ALIAS} ‘$2’ state | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, adopted]<p>Update: 600s</p> |
| Incoming Traffic Unicast 03 | <p>-</p> | SNMP agent |
ifInUcast.3<p>Update: 600</p> |
| Outgoing Traffic 06 | <p>-</p> | SNMP agent |
ifOutOctets.6<p>Update: 300</p> |
| Radio RSSI | <p>-</p> | SNMP agent |
ubntWlStatRssi<p>Update: 30s</p> |
| Interface {#IFNAME}({#IFALIAS}): Speed | <p>-</p> | SNMP agent |
net.if.speed[ifHighSpeed.{#SNMPINDEX}]<p>Update: 30s</p> |
| Guests connected to {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, guest-num_sta]<p>Update: 60s</p> |
| Bandwidth 07 | <p>-</p> | SNMP agent |
ifSpeed.7<p>Update: 600</p> |
| Outgoing Traffic 01 | <p>-</p> | SNMP agent |
ifOutOctets.1<p>Update: 300</p> |
| Incoming Traffic Unicast 05 | <p>-</p> | SNMP agent |
ifInUcast.5<p>Update: 600</p> |
| Number of WLANs on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[wlan, items_num, count]<p>Update: 60s</p> |
| Model of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, model]<p>Update: 3600s</p> |
| Incoming Traffic No-Unicast 06 | <p>-</p> | SNMP agent |
ifInNoUcast.6<p>Update: 600</p> |
| Number of $2 AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, isolated, count]<p>Update: 60s</p> |
| Incoming Traffic No-Unicast 01 | <p>-</p> | SNMP agent |
ifInNoUcast.1<p>Update: 600</p> |
| AirMax Capacity | <p>-</p> | SNMP agent |
ubntAirMaxCapacity<p>Update: 30s</p> |
| Operation Status 04 | <p>-</p> | SNMP agent |
ifOperStatus.4<p>Update: 60</p> |
| Wireless incoming traffic of site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, rx_bytes, sum]<p>Update: 30s</p> |
| Radio Chain Mask | <p>-</p> | SNMP agent |
ubntRadioChainmask<p>Update: 30s</p> |
| Radio Mode | <p>-</p> | SNMP agent |
ubntRadioMode<p>Update: 30s</p> |
| Operating system | <p>-</p> | SNMP agent |
system.sw.os<p>Update: 3600s</p> |
| Device uptime | <p>-</p> | SNMP agent |
system.uptime[sysUpTime]<p>Update: 30s</p> |
| Radio TX Power | <p>-</p> | SNMP agent |
ubntRadioTxPower<p>Update: 30s</p> |
| Operation Status 06 | <p>-</p> | SNMP agent |
ifOperStatus.6<p>Update: 60</p> |
| Users connected to {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, user-num_sta]<p>Update: 60s</p> |
| Outgoing Traffic 03 | <p>-</p> | SNMP agent |
ifOutOctets.3<p>Update: 300</p> |
| Bandwidth 05 | <p>-</p> | SNMP agent |
ifSpeed.5<p>Update: 600</p> |
| Bandwidth 04 | <p>-</p> | SNMP agent |
ifSpeed.4<p>Update: 600</p> |
| Device name | <p>-</p> | SNMP agent |
system.name<p>Update: 1h</p> |
| Firmware of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, version]<p>Update: 3600s</p> |
| Users connected to site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, user-num_sta, sum]<p>Update: 60s</p> |
| Bandwidth 03 | <p>-</p> | SNMP agent |
ifSpeed.3<p>Update: 600</p> |
| Interface {#IFNAME}({#IFALIAS}): Bits sent | <p>-</p> | SNMP agent |
net.if.out[ifHCOutOctets.{#SNMPINDEX}]<p>Update: 30s</p> |
| Incoming Traffic Unicast 04 | <p>-</p> | SNMP agent |
ifInUcast.4<p>Update: 600</p> |
| Incoming Traffic No-Unicast 07 | <p>-</p> | SNMP agent |
ifInNoUcast.7<p>Update: 600</p> |
| Wireless power on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng-tx_power]<p>Update: 120s</p> |
| Bandwidth 02 | <p>-</p> | SNMP agent |
ifSpeed.2<p>Update: 600</p> |
| Outgoing Traffic 04 | <p>-</p> | SNMP agent |
ifOutOctets.4<p>Update: 300</p> |
| Operation Status 03 | <p>-</p> | SNMP agent |
ifOperStatus.3<p>Update: 60</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.1<p>Update: 600</p> |
| TX retries on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng_tx_retries]<p>Update: 60s</p> |
| Wireless outgoing drops on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap,stat.tx_dropped, sum]<p>Update: 30s</p> |
| Incoming Traffic 05 | <p>-</p> | SNMP agent |
ifInOctets.5<p>Update: 300</p> |
| Device description | <p>-</p> | SNMP agent |
system.descr<p>Update: 1h</p> |
| Outgoing Traffic 05 | <p>-</p> | SNMP agent |
ifOutOctets.5<p>Update: 300</p> |
| Incoming Traffic 04 | <p>-</p> | SNMP agent |
ifInOctets.4<p>Update: 300</p> |
| Number of all AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, items_num, count]<p>Update: 3600s</p> |
| HP V1910-48G Switch JE009A | <p>-</p> | SNMP agent |
system.hw.version<p>Update: 3600s</p> |
| Device uptime | <p>MIB: SNMPv2-MIB The time (in hundredths of a second) since the network management portion of the system was last re-initialized.</p> | SNMP agent |
system.uptime<p>Update: 30s</p> |
| Incoming Traffic Unicast 02 | <p>-</p> | SNMP agent |
ifInUcast.2<p>Update: 600</p> |
| Clients connected to {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, num_sta]<p>Update: 60s</p> |
| Number of $2 AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, locating, count]<p>Update: 60s</p> |
| Operation Status 05 | <p>-</p> | SNMP agent |
ifOperStatus.5<p>Update: 60</p> |
| Operation Status 02 | <p>-</p> | SNMP agent |
ifOperStatus.2<p>Update: 60</p> |
| Incoming Traffic Unicast 06 | <p>-</p> | SNMP agent |
ifInUcast.6<p>Update: 600</p> |
| Incoming Traffic Unicast 07 | <p>-</p> | SNMP agent |
ifInUcast.7<p>Update: 600</p> |
| Incoming Traffic Unicast 01 | <p>-</p> | SNMP agent |
ifInUcast.1<p>Update: 600</p> |
| Firmware version | <p>MIB: ENTITY-MIB</p> | SNMP agent |
system.hw.firmware<p>Update: 3600s</p> |
| Incoming Traffic 01 | <p>-</p> | SNMP agent |
ifInOctets.1<p>Update: 300</p> |
| Operation Status 07 | <p>-</p> | SNMP agent |
ifOperStatus.7<p>Update: 60</p> |
| Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 3600</p> |
| Radio Rx Rate | <p>-</p> | SNMP agent |
ubntWlStatRxRate<p>Update: 30s</p> |
| Number of $2 AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, adopted, count]<p>Update: 600s</p> |
| Serial of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, serial]<p>Update: 3600</p> |
| Radio Signal | <p>-</p> | SNMP agent |
ubntWlStatSignal<p>Update: 30s</p> |
| SNMP traps (fallback) | <p>-</p> | SNMP trap |
snmptrap.fallback<p>Update: 0</p> |
| Clients connected to site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, num_sta, sum]<p>Update: 30s</p> |
| Radio Noise | <p>-</p> | SNMP agent |
ubntWlStatNoiseFloor<p>Update: 30s</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.4<p>Update: 600</p> |
| Wireless channel on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng-channel]<p>Update: 120s</p> |
| TX timeout on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng_ast_txto]<p>Update: 60s</p> |
| Incoming Traffic 06 | <p>-</p> | SNMP agent |
ifInOctets.6<p>Update: 300</p> |
| Device Chipset Version | <p>-</p> | SNMP agent |
ubntChipsetVersion<p>Update: 60s</p> |
| Incoming Traffic 07 | <p>-</p> | SNMP agent |
ifInOctets.7<p>Update: 300</p> |
| Radio Channel Width | <p>-</p> | SNMP agent |
ubntWlStatChanWidth<p>Update: 30s</p> |
| Incoming Traffic 02 | <p>-</p> | SNMP agent |
ifInOctets.2<p>Update: 300</p> |
| Wireless outgoing traffic on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, tx_bytes]<p>Update: 60s</p> |
| Incoming Traffic No-Unicast 03 | <p>-</p> | SNMP agent |
ifInNoUcast.3<p>Update: 600</p> |
| Outgoing Traffic 02 | <p>-</p> | SNMP agent |
ifOutOctets.2<p>Update: 300</p> |
| Radio CCQ | <p>-</p> | SNMP agent |
ubntWlStatCcq<p>Update: 30s</p> |
| Device Contact Details | <p>-</p> | SNMP agent |
sysContact<p>Update: 3600</p> |
| AirMax Quality | <p>-</p> | SNMP agent |
ubntAirMaxQuality<p>Update: 30s</p> |
| Wireless incoming traffic of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, rx_bytes]<p>Update: 60s</p> |
| Bandwidth 06 | <p>-</p> | SNMP agent |
ifSpeed.6<p>Update: 600</p> |
| Wireless outgoing traffic on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, tx_bytes, sum]<p>Update: 30s</p> |
| Hardware model name | <p>MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system’s hardware type, software operating-system, and networking software.</p> | SNMP agent |
system.hw.model<p>Update: 3600s</p> |
| {#ALIAS} ‘$2’ state | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, isolated]<p>Update: 60s</p> |
| Radio Frequency | <p>-</p> | SNMP agent |
ubntRadioFreq<p>Update: 30s</p> |
| Incoming Traffic No-Unicast 05 | <p>-</p> | SNMP agent |
ifInNoUcast.5<p>Update: 600</p> |
| Incoming Traffic 03 | <p>-</p> | SNMP agent |
ifInOctets.3<p>Update: 300</p> |
| Radio Tx Rate | <p>-</p> | SNMP agent |
ubntWlStatTxRate<p>Update: 30s</p> |
| Outgoing Traffic 07 | <p>-</p> | SNMP agent |
ifOutOctets.7<p>Update: 300</p> |
| Operation Status 01 | <p>-</p> | SNMP agent |
ifOperStatus.1<p>Update: 60</p> |
| Device UPTIME | <p>-</p> | SNMP agent |
sysUpTimeInstance<p>Update: 300</p> |
| Interface {#IFNAME}({#IFALIAS}): Bits received | <p>-</p> | SNMP agent |
net.if.in[ifHCInOctets.{#SNMPINDEX}]<p>Update: 30s</p> |
| CPU utilization | <p>MIB: MY-PROCESS-MIB CPU utilization in %</p> | SNMP agent |
system.cpu.util[myCPUUtilization5Min.0]<p>Update: 180s</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.3<p>Update: 600</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.2<p>Update: 600</p> |
| SNMP availability | <p>-</p> | Zabbix internal |
zabbix[host,snmp,available]<p>Update: 1m</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.7<p>Update: 600</p> |
| Radio Count Stations | <p>-</p> | SNMP agent |
ubntWlStatStaCount<p>Update: 30s</p> |
| Device location | <p>-</p> | SNMP agent |
system.location<p>Update: 1h</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.5<p>Update: 600</p> |
| Bandwidth 01 | <p>-</p> | SNMP agent |
ifSpeed.1<p>Update: 600</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.6<p>Update: 600</p> |
| AirMax Enabled | <p>-</p> | SNMP agent |
ubntAirMaxEnabled<p>Update: 30s</p> |
| Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 300</p> |
| Wireless outgoing drops on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, stat.tx_dropped]<p>Update: 60s</p> |
| Incoming Traffic No-Unicast 04 | <p>-</p> | SNMP agent |
ifInNoUcast.4<p>Update: 600</p> |
| Admin status of interface $1 | <p>-</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Alias of interface $1 | <p>-</p> | SNMP agent |
ifAlias[{#SNMPVALUE}]<p>Update: 3600s</p><p>LLD</p> |
| Description of interface $1 | <p>-</p> | SNMP agent |
ifDescr[{#SNMPVALUE}]<p>Update: 3600s</p><p>LLD</p> |
| Inbound errors on interface $1 | <p>-</p> | SNMP agent |
ifInErrors[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Incoming traffic on interface $1 | <p>-</p> | SNMP agent |
ifInOctets[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Operational status of interface $1 | <p>-</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Outbound errors on interface $1 | <p>-</p> | SNMP agent |
ifOutErrors[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Outgoing traffic on interface $1 | <p>-</p> | SNMP agent |
ifOutOctets[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Speed of interface $1 | <p>-</p> | SNMP agent |
ifSpeed[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| #{#SNMPINDEX}: Memory utilization | <p>-</p> | Calculated |
vm.memory.pused[memoryUsedPercentage.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Total memory | <p>-</p> | Calculated |
vm.memory.total[memoryTotal.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Total memory in units | <p>-</p> | SNMP agent |
vm.memory.units.total[hrStorageSize.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Used memory in units | <p>-</p> | SNMP agent |
vm.memory.units.used[hrStorageUsed.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Memory units | <p>-</p> | SNMP agent |
vm.memory.units[hrStorageAllocationUnits.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Used memory | <p>-</p> | Calculated |
vm.memory.used[memoryUsed.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: CPU utilization | <p>-</p> | SNMP agent |
system.cpu.util[hrProcessorLoad.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| #{#SNMPINDEX}: High CPU utilization | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: avg(/Ubiquiti Unifi AP LR SNMPv1/system.cpu.util[hrProcessorLoad.{#SNMPINDEX}],5m)>{$CPU_UTIL_MAX}</p><p>Recovery expression: </p> | average |
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} | <p>-</p> | <p>Expression: (last(/Ubiquiti Unifi AP LR SNMPv1/ifOperStatus[{#SNMPVALUE}],#1)<>last(/Ubiquiti Unifi AP LR SNMPv1/ifOperStatus[{#SNMPVALUE}],#2))=1</p><p>Recovery expression: </p> | information |
| #{#SNMPINDEX}: High memory utilization | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: avg(/Ubiquiti Unifi AP LR SNMPv1/vm.memory.pused[memoryUsedPercentage.{#SNMPINDEX}],5m)>{$MEMORY_UTIL_MAX}</p><p>Recovery expression: </p> | average |
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} (LLD) | <p>-</p> | <p>Expression: (last(/Ubiquiti Unifi AP LR SNMPv1/ifOperStatus[{#SNMPVALUE}],#1)<>last(/Ubiquiti Unifi AP LR SNMPv1/ifOperStatus[{#SNMPVALUE}],#2))=1</p><p>Recovery expression: </p> | information |
| #{#SNMPINDEX}: High memory utilization (LLD) | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: avg(/Ubiquiti Unifi AP LR SNMPv1/vm.memory.pused[memoryUsedPercentage.{#SNMPINDEX}],5m)>{$MEMORY_UTIL_MAX}</p><p>Recovery expression: </p> | average |
| #{#SNMPINDEX}: High CPU utilization (LLD) | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: avg(/Ubiquiti Unifi AP LR SNMPv1/system.cpu.util[hrProcessorLoad.{#SNMPINDEX}],5m)>{$CPU_UTIL_MAX}</p><p>Recovery expression: </p> | average |
Template para Ubiquiti Unifi AP e Wifi
leonardog50
There are no macros links in this template.
There are no template links in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Network Interfaces | <p>-</p> | SNMP agent |
ifDescr<p>Update: 30</p> |
| Memory Discovery | <p>-</p> | SNMP agent |
memory.discovery<p>Update: 1h</p> |
| CPU Discovery | <p>HOST-RESOURCES-MIB::hrProcessorTable discovery</p> | SNMP agent |
hrProcessorLoad.discovery<p>Update: 1h</p> |
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| Incoming Traffic No-Unicast 02 | <p>-</p> | SNMP agent |
ifInNoUcast.2<p>Update: 600</p> |
| Guests connected to site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, guest-num_sta, sum]<p>Update: 60s</p> |
| {#ALIAS} ‘$2’ state | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, adopted]<p>Update: 600s</p> |
| Incoming Traffic Unicast 03 | <p>-</p> | SNMP agent |
ifInUcast.3<p>Update: 600</p> |
| Outgoing Traffic 06 | <p>-</p> | SNMP agent |
ifOutOctets.6<p>Update: 300</p> |
| Radio RSSI | <p>-</p> | SNMP agent |
ubntWlStatRssi<p>Update: 30s</p> |
| Interface {#IFNAME}({#IFALIAS}): Speed | <p>-</p> | SNMP agent |
net.if.speed[ifHighSpeed.{#SNMPINDEX}]<p>Update: 30s</p> |
| Guests connected to {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, guest-num_sta]<p>Update: 60s</p> |
| Bandwidth 07 | <p>-</p> | SNMP agent |
ifSpeed.7<p>Update: 600</p> |
| Outgoing Traffic 01 | <p>-</p> | SNMP agent |
ifOutOctets.1<p>Update: 300</p> |
| Incoming Traffic Unicast 05 | <p>-</p> | SNMP agent |
ifInUcast.5<p>Update: 600</p> |
| Number of WLANs on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[wlan, items_num, count]<p>Update: 60s</p> |
| Model of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, model]<p>Update: 3600s</p> |
| Incoming Traffic No-Unicast 06 | <p>-</p> | SNMP agent |
ifInNoUcast.6<p>Update: 600</p> |
| Number of $2 AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, isolated, count]<p>Update: 60s</p> |
| Incoming Traffic No-Unicast 01 | <p>-</p> | SNMP agent |
ifInNoUcast.1<p>Update: 600</p> |
| AirMax Capacity | <p>-</p> | SNMP agent |
ubntAirMaxCapacity<p>Update: 30s</p> |
| Operation Status 04 | <p>-</p> | SNMP agent |
ifOperStatus.4<p>Update: 60</p> |
| Wireless incoming traffic of site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, rx_bytes, sum]<p>Update: 30s</p> |
| Radio Chain Mask | <p>-</p> | SNMP agent |
ubntRadioChainmask<p>Update: 30s</p> |
| Radio Mode | <p>-</p> | SNMP agent |
ubntRadioMode<p>Update: 30s</p> |
| Operating system | <p>-</p> | SNMP agent |
system.sw.os<p>Update: 3600s</p> |
| Device uptime | <p>-</p> | SNMP agent |
system.uptime[sysUpTime]<p>Update: 30s</p> |
| Radio TX Power | <p>-</p> | SNMP agent |
ubntRadioTxPower<p>Update: 30s</p> |
| Operation Status 06 | <p>-</p> | SNMP agent |
ifOperStatus.6<p>Update: 60</p> |
| Users connected to {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, user-num_sta]<p>Update: 60s</p> |
| Outgoing Traffic 03 | <p>-</p> | SNMP agent |
ifOutOctets.3<p>Update: 300</p> |
| Bandwidth 05 | <p>-</p> | SNMP agent |
ifSpeed.5<p>Update: 600</p> |
| Bandwidth 04 | <p>-</p> | SNMP agent |
ifSpeed.4<p>Update: 600</p> |
| Device name | <p>-</p> | SNMP agent |
system.name<p>Update: 1h</p> |
| Firmware of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, version]<p>Update: 3600s</p> |
| Users connected to site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, user-num_sta, sum]<p>Update: 60s</p> |
| Bandwidth 03 | <p>-</p> | SNMP agent |
ifSpeed.3<p>Update: 600</p> |
| Interface {#IFNAME}({#IFALIAS}): Bits sent | <p>-</p> | SNMP agent |
net.if.out[ifHCOutOctets.{#SNMPINDEX}]<p>Update: 30s</p> |
| Incoming Traffic Unicast 04 | <p>-</p> | SNMP agent |
ifInUcast.4<p>Update: 600</p> |
| Incoming Traffic No-Unicast 07 | <p>-</p> | SNMP agent |
ifInNoUcast.7<p>Update: 600</p> |
| Wireless power on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng-tx_power]<p>Update: 120s</p> |
| Bandwidth 02 | <p>-</p> | SNMP agent |
ifSpeed.2<p>Update: 600</p> |
| Outgoing Traffic 04 | <p>-</p> | SNMP agent |
ifOutOctets.4<p>Update: 300</p> |
| Operation Status 03 | <p>-</p> | SNMP agent |
ifOperStatus.3<p>Update: 60</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.1<p>Update: 600</p> |
| TX retries on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng_tx_retries]<p>Update: 60s</p> |
| Wireless outgoing drops on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap,stat.tx_dropped, sum]<p>Update: 30s</p> |
| Incoming Traffic 05 | <p>-</p> | SNMP agent |
ifInOctets.5<p>Update: 300</p> |
| Device description | <p>-</p> | SNMP agent |
system.descr<p>Update: 1h</p> |
| Outgoing Traffic 05 | <p>-</p> | SNMP agent |
ifOutOctets.5<p>Update: 300</p> |
| Incoming Traffic 04 | <p>-</p> | SNMP agent |
ifInOctets.4<p>Update: 300</p> |
| Number of all AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, items_num, count]<p>Update: 3600s</p> |
| HP V1910-48G Switch JE009A | <p>-</p> | SNMP agent |
system.hw.version<p>Update: 3600s</p> |
| Device uptime | <p>MIB: SNMPv2-MIB The time (in hundredths of a second) since the network management portion of the system was last re-initialized.</p> | SNMP agent |
system.uptime<p>Update: 30s</p> |
| Incoming Traffic Unicast 02 | <p>-</p> | SNMP agent |
ifInUcast.2<p>Update: 600</p> |
| Clients connected to {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, num_sta]<p>Update: 60s</p> |
| Number of $2 AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, locating, count]<p>Update: 60s</p> |
| Operation Status 05 | <p>-</p> | SNMP agent |
ifOperStatus.5<p>Update: 60</p> |
| Operation Status 02 | <p>-</p> | SNMP agent |
ifOperStatus.2<p>Update: 60</p> |
| Incoming Traffic Unicast 06 | <p>-</p> | SNMP agent |
ifInUcast.6<p>Update: 600</p> |
| Incoming Traffic Unicast 07 | <p>-</p> | SNMP agent |
ifInUcast.7<p>Update: 600</p> |
| Incoming Traffic Unicast 01 | <p>-</p> | SNMP agent |
ifInUcast.1<p>Update: 600</p> |
| Firmware version | <p>MIB: ENTITY-MIB</p> | SNMP agent |
system.hw.firmware<p>Update: 3600s</p> |
| Incoming Traffic 01 | <p>-</p> | SNMP agent |
ifInOctets.1<p>Update: 300</p> |
| Operation Status 07 | <p>-</p> | SNMP agent |
ifOperStatus.7<p>Update: 60</p> |
| Device Location | <p>-</p> | SNMP agent |
sysLocation<p>Update: 3600</p> |
| Radio Rx Rate | <p>-</p> | SNMP agent |
ubntWlStatRxRate<p>Update: 30s</p> |
| Number of $2 AP’s on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, adopted, count]<p>Update: 600s</p> |
| Serial of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, serial]<p>Update: 3600</p> |
| Radio Signal | <p>-</p> | SNMP agent |
ubntWlStatSignal<p>Update: 30s</p> |
| SNMP traps (fallback) | <p>-</p> | SNMP trap |
snmptrap.fallback<p>Update: 0</p> |
| Clients connected to site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, num_sta, sum]<p>Update: 30s</p> |
| Radio Noise | <p>-</p> | SNMP agent |
ubntWlStatNoiseFloor<p>Update: 30s</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.4<p>Update: 600</p> |
| Wireless channel on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng-channel]<p>Update: 120s</p> |
| TX timeout on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, ng_ast_txto]<p>Update: 60s</p> |
| Incoming Traffic 06 | <p>-</p> | SNMP agent |
ifInOctets.6<p>Update: 300</p> |
| Device Chipset Version | <p>-</p> | SNMP agent |
ubntChipsetVersion<p>Update: 60s</p> |
| Incoming Traffic 07 | <p>-</p> | SNMP agent |
ifInOctets.7<p>Update: 300</p> |
| Radio Channel Width | <p>-</p> | SNMP agent |
ubntWlStatChanWidth<p>Update: 30s</p> |
| Incoming Traffic 02 | <p>-</p> | SNMP agent |
ifInOctets.2<p>Update: 300</p> |
| Wireless outgoing traffic on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, tx_bytes]<p>Update: 60s</p> |
| Incoming Traffic No-Unicast 03 | <p>-</p> | SNMP agent |
ifInNoUcast.3<p>Update: 600</p> |
| Outgoing Traffic 02 | <p>-</p> | SNMP agent |
ifOutOctets.2<p>Update: 300</p> |
| Radio CCQ | <p>-</p> | SNMP agent |
ubntWlStatCcq<p>Update: 30s</p> |
| Device Contact Details | <p>-</p> | SNMP agent |
sysContact<p>Update: 3600</p> |
| AirMax Quality | <p>-</p> | SNMP agent |
ubntAirMaxQuality<p>Update: 30s</p> |
| Wireless incoming traffic of {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, rx_bytes]<p>Update: 60s</p> |
| Bandwidth 06 | <p>-</p> | SNMP agent |
ifSpeed.6<p>Update: 600</p> |
| Wireless outgoing traffic on site | <p>-</p> | Zabbix agent (active) |
unifi.site.state[ap, tx_bytes, sum]<p>Update: 30s</p> |
| Hardware model name | <p>MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system’s hardware type, software operating-system, and networking software.</p> | SNMP agent |
system.hw.model<p>Update: 3600s</p> |
| {#ALIAS} ‘$2’ state | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, isolated]<p>Update: 60s</p> |
| Radio Frequency | <p>-</p> | SNMP agent |
ubntRadioFreq<p>Update: 30s</p> |
| Incoming Traffic No-Unicast 05 | <p>-</p> | SNMP agent |
ifInNoUcast.5<p>Update: 600</p> |
| Incoming Traffic 03 | <p>-</p> | SNMP agent |
ifInOctets.3<p>Update: 300</p> |
| Radio Tx Rate | <p>-</p> | SNMP agent |
ubntWlStatTxRate<p>Update: 30s</p> |
| Outgoing Traffic 07 | <p>-</p> | SNMP agent |
ifOutOctets.7<p>Update: 300</p> |
| Operation Status 01 | <p>-</p> | SNMP agent |
ifOperStatus.1<p>Update: 60</p> |
| Device UPTIME | <p>-</p> | SNMP agent |
sysUpTimeInstance<p>Update: 300</p> |
| Interface {#IFNAME}({#IFALIAS}): Bits received | <p>-</p> | SNMP agent |
net.if.in[ifHCInOctets.{#SNMPINDEX}]<p>Update: 30s</p> |
| CPU utilization | <p>MIB: MY-PROCESS-MIB CPU utilization in %</p> | SNMP agent |
system.cpu.util[myCPUUtilization5Min.0]<p>Update: 180s</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.3<p>Update: 600</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.2<p>Update: 600</p> |
| SNMP availability | <p>-</p> | Zabbix internal |
zabbix[host,snmp,available]<p>Update: 1m</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.7<p>Update: 600</p> |
| Radio Count Stations | <p>-</p> | SNMP agent |
ubntWlStatStaCount<p>Update: 30s</p> |
| Device location | <p>-</p> | SNMP agent |
system.location<p>Update: 1h</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.5<p>Update: 600</p> |
| Bandwidth 01 | <p>-</p> | SNMP agent |
ifSpeed.1<p>Update: 600</p> |
| Description Interface $1 | <p>-</p> | SNMP agent |
ifDescr.6<p>Update: 600</p> |
| AirMax Enabled | <p>-</p> | SNMP agent |
ubntAirMaxEnabled<p>Update: 30s</p> |
| Device Name | <p>-</p> | SNMP agent |
sysName<p>Update: 300</p> |
| Wireless outgoing drops on {#ALIAS} | <p>-</p> | Zabbix agent (active) |
unifi.ap.state[{#ID}, stat.tx_dropped]<p>Update: 60s</p> |
| Incoming Traffic No-Unicast 04 | <p>-</p> | SNMP agent |
ifInNoUcast.4<p>Update: 600</p> |
| Admin status of interface $1 | <p>-</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Alias of interface $1 | <p>-</p> | SNMP agent |
ifAlias[{#SNMPVALUE}]<p>Update: 3600s</p><p>LLD</p> |
| Description of interface $1 | <p>-</p> | SNMP agent |
ifDescr[{#SNMPVALUE}]<p>Update: 3600s</p><p>LLD</p> |
| Inbound errors on interface $1 | <p>-</p> | SNMP agent |
ifInErrors[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Incoming traffic on interface $1 | <p>-</p> | SNMP agent |
ifInOctets[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Operational status of interface $1 | <p>-</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Outbound errors on interface $1 | <p>-</p> | SNMP agent |
ifOutErrors[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Outgoing traffic on interface $1 | <p>-</p> | SNMP agent |
ifOutOctets[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| Speed of interface $1 | <p>-</p> | SNMP agent |
ifSpeed[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
| #{#SNMPINDEX}: Memory utilization | <p>-</p> | Calculated |
vm.memory.pused[memoryUsedPercentage.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Total memory | <p>-</p> | Calculated |
vm.memory.total[memoryTotal.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Total memory in units | <p>-</p> | SNMP agent |
vm.memory.units.total[hrStorageSize.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Used memory in units | <p>-</p> | SNMP agent |
vm.memory.units.used[hrStorageUsed.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Memory units | <p>-</p> | SNMP agent |
vm.memory.units[hrStorageAllocationUnits.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: Used memory | <p>-</p> | Calculated |
vm.memory.used[memoryUsed.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| #{#SNMPINDEX}: CPU utilization | <p>-</p> | SNMP agent |
system.cpu.util[hrProcessorLoad.{#SNMPINDEX}]<p>Update: 3m</p><p>LLD</p> |
| Name | Description | Expression | Priority |
|---|---|---|---|
| #{#SNMPINDEX}: High CPU utilization | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: avg(/Ubiquiti Unifi AP LR SNMPv1/system.cpu.util[hrProcessorLoad.{#SNMPINDEX}],5m)>{$CPU_UTIL_MAX}</p><p>Recovery expression: </p> | average |
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} | <p>-</p> | <p>Expression: (last(/Ubiquiti Unifi AP LR SNMPv1/ifOperStatus[{#SNMPVALUE}],#1)<>last(/Ubiquiti Unifi AP LR SNMPv1/ifOperStatus[{#SNMPVALUE}],#2))=1</p><p>Recovery expression: </p> | information |
| #{#SNMPINDEX}: High memory utilization | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: avg(/Ubiquiti Unifi AP LR SNMPv1/vm.memory.pused[memoryUsedPercentage.{#SNMPINDEX}],5m)>{$MEMORY_UTIL_MAX}</p><p>Recovery expression: </p> | average |
| Operational status was changed on {HOST.NAME} interface {#SNMPVALUE} (LLD) | <p>-</p> | <p>Expression: (last(/Ubiquiti Unifi AP LR SNMPv1/ifOperStatus[{#SNMPVALUE}],#1)<>last(/Ubiquiti Unifi AP LR SNMPv1/ifOperStatus[{#SNMPVALUE}],#2))=1</p><p>Recovery expression: </p> | information |
| #{#SNMPINDEX}: High memory utilization (LLD) | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: avg(/Ubiquiti Unifi AP LR SNMPv1/vm.memory.pused[memoryUsedPercentage.{#SNMPINDEX}],5m)>{$MEMORY_UTIL_MAX}</p><p>Recovery expression: </p> | average |
| #{#SNMPINDEX}: High CPU utilization (LLD) | <p>Last value: {ITEM.LASTVALUE1}.</p> | <p>Expression: avg(/Ubiquiti Unifi AP LR SNMPv1/system.cpu.util[hrProcessorLoad.{#SNMPINDEX}],5m)>{$CPU_UTIL_MAX}</p><p>Recovery expression: </p> | average |