Available versions




SNMP THECUS NAS

Overview

Делал под Thecus N8900

Чтобы нормально получать данные через SNMP ставьте последние прошивки на устройства.

В принципе моя модель - это linux NAS. Через linux SNMPv2 практически все выдается, но в самой

морде есть mib-файл, на его основе и сделал данный шаблон.

Вопросы на 2135850@211.ru

Author

S.V.Sidenko

Macros used

Name Description Default Type
{$HD_TEMPERATURE_ALARM} <p>-</p> 51 Text macro
{$HD_TEMPERATURE_WARNING} <p>-</p> 40 Text macro
{$SNMP_PORT} <p>-</p> 161 Text macro

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
RAID discovery <p>-</p> SNMP agent nasRaid.discovery<p>Update: 1h</p>
Hard disks discovery <p>-</p> SNMP agent nasDisk.discovery<p>Update: 1h</p>

Items collected

Name Description Type Key and additional info
System fan status <p>-</p> SNMP agent systemFanStatus<p>Update: 60</p>
System status <p>-</p> SNMP agent systemStatus<p>Update: 60</p>
System vendor <p>-</p> SNMP agent systemVendor<p>Update: 3h</p>
System Mini-UPS Status <p>-</p> SNMP agent systemMiniUPSStatus<p>Update: 60</p>
System firmware <p>-</p> SNMP agent systemFirmware<p>Update: 3h</p>
System model <p>-</p> SNMP agent systemModel<p>Update: 3h</p>
System temperature <p>System temperature in centigrade</p> SNMP agent systemTemperature<p>Update: 60</p>
RAID ID of {#SNMPVALUE} <p>-</p> SNMP agent raidID[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID level of {#SNMPVALUE} <p>-</p> SNMP agent raidLevel[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID number of {#SNMPVALUE} <p>-</p> SNMP agent raidNum[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID size of {#SNMPVALUE} <p>-</p> SNMP agent raidSize[{#SNMPINDEX}]<p>Update: 1h</p><p>LLD</p>
RAID status of {#SNMPVALUE} <p>-</p> SNMP agent raidStatus[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
RAID units of {#SNMPVALUE} <p>-</p> SNMP agent raidUnits[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID used percent of {#SNMPVALUE} (%) <p>-</p> SNMP agent raidUsedPercentage[{#SNMPINDEX}]<p>Update: 1h</p><p>LLD</p>
Disk Capacity {#SNMPVALUE} <p>-</p> SNMP agent diskCapacity[{#SNMPINDEX}]<p>Update: 1h</p><p>LLD</p>
Disk ID {#SNMPVALUE} <p>-</p> SNMP agent diskID[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
Model of {#SNMPVALUE} <p>-</p> SNMP agent diskModel[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
Reallocate_Sector_Ct {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr5[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Power_On_hours{#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr9[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
End-to-End Error {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr184[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Temperature of {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr194[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Current__Pending_Sector {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr197[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
S.M.A.R.T. info of {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTHealthCheck[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Status of {#SNMPVALUE} <p>-</p> SNMP agent diskStatus[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Disk Tray Number {#SNMPVALUE} <p>-</p> SNMP agent diskTrayNum[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>

Triggers

Name Description Expression Priority
State of {#SNMPVALUE} on {HOST.NAME} is “Current Pending Sector” <p>-</p> <p>Expression: {SNMP THECUS NAS:diskSMARTAttr197[{#SNMPINDEX}].last(0)}>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “End-to-End Error” <p>State “noDisk”</p> <p>Expression: {SNMP THECUS NAS:diskSMARTAttr184[{#SNMPINDEX}].last(0)}>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “Reallocated_Sector_Ct” <p>State “rwError”</p> <p>Expression: {SNMP THECUS NAS:diskSMARTAttr5[{#SNMPINDEX}].last(0)}>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is not “Ready” ({ITEM.VALUE1}) <p>-</p> <p>Expression: {SNMP THECUS NAS:diskStatus[{#SNMPINDEX}].last(0)}=3</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_ALARM} for 2 min <p>-</p> <p>Expression: {SNMP THECUS NAS:diskSMARTAttr194[{#SNMPINDEX}].min(2m)}>51</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_WARNING} for 2min <p>-</p> <p>Expression: {SNMP THECUS NAS:diskSMARTAttr194[{#SNMPINDEX}].min(2m)}>40</p><p>Recovery expression: </p> information
Free space is less than 5% on volume {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP THECUS NAS:raidUsedPercentage[{#SNMPINDEX}].last(0)}>95</p><p>Recovery expression: </p> high
Free space is less than 10% on volume {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP THECUS NAS:raidUsedPercentage[{#SNMPINDEX}].last(0)}>90</p><p>Recovery expression: </p> warning
Free space is less than 20% on volume {#SNMPVALUE} <p>-</p> <p>Expression: {SNMP THECUS NAS:raidUsedPercentage[{#SNMPINDEX}].last(0)}>80</p><p>Recovery expression: </p> information
Free space is less than 5% on volume {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP THECUS NAS:raidUsedPercentage[{#SNMPINDEX}].last(0)}>95</p><p>Recovery expression: </p> high
Free space is less than 10% on volume {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP THECUS NAS:raidUsedPercentage[{#SNMPINDEX}].last(0)}>90</p><p>Recovery expression: </p> warning
Free space is less than 20% on volume {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: {SNMP THECUS NAS:raidUsedPercentage[{#SNMPINDEX}].last(0)}>80</p><p>Recovery expression: </p> information
State of {#SNMPVALUE} on {HOST.NAME} is “Current Pending Sector” (LLD) <p>-</p> <p>Expression: {SNMP THECUS NAS:diskSMARTAttr197[{#SNMPINDEX}].last(0)}>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “End-to-End Error” (LLD) <p>State “noDisk”</p> <p>Expression: {SNMP THECUS NAS:diskSMARTAttr184[{#SNMPINDEX}].last(0)}>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “Reallocated_Sector_Ct” (LLD) <p>State “rwError”</p> <p>Expression: {SNMP THECUS NAS:diskSMARTAttr5[{#SNMPINDEX}].last(0)}>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is not “Ready” ({ITEM.VALUE1}) (LLD) <p>-</p> <p>Expression: {SNMP THECUS NAS:diskStatus[{#SNMPINDEX}].last(0)}=3</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_ALARM} for 2 min (LLD) <p>-</p> <p>Expression: {SNMP THECUS NAS:diskSMARTAttr194[{#SNMPINDEX}].min(2m)}>51</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_WARNING} for 2min (LLD) <p>-</p> <p>Expression: {SNMP THECUS NAS:diskSMARTAttr194[{#SNMPINDEX}].min(2m)}>40</p><p>Recovery expression: </p> information

SNMP THECUS NAS

Overview

Делал под Thecus N8900

Чтобы нормально получать данные через SNMP ставьте последние прошивки на устройства.

В принципе моя модель - это linux NAS. Через linux SNMPv2 практически все выдается, но в самой

морде есть mib-файл, на его основе и сделал данный шаблон.

Вопросы на 2135850@211.ru

Author

S.V.Sidenko

Macros used

Name Description Default Type
{$HD_TEMPERATURE_ALARM} <p>-</p> 51 Text macro
{$HD_TEMPERATURE_WARNING} <p>-</p> 40 Text macro
{$SNMP_PORT} <p>-</p> 161 Text macro

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
RAID discovery <p>-</p> SNMP agent nasRaid.discovery<p>Update: 1h</p>
Hard disks discovery <p>-</p> SNMP agent nasDisk.discovery<p>Update: 1h</p>

Items collected

Name Description Type Key and additional info
System fan status <p>-</p> SNMP agent systemFanStatus<p>Update: 60</p>
System vendor <p>-</p> SNMP agent systemVendor<p>Update: 3h</p>
System Mini-UPS Status <p>-</p> SNMP agent systemMiniUPSStatus<p>Update: 60</p>
System temperature <p>System temperature in centigrade</p> SNMP agent systemTemperature<p>Update: 60</p>
System firmware <p>-</p> SNMP agent systemFirmware<p>Update: 3h</p>
System status <p>-</p> SNMP agent systemStatus<p>Update: 60</p>
System model <p>-</p> SNMP agent systemModel<p>Update: 3h</p>
RAID ID of {#SNMPVALUE} <p>-</p> SNMP agent raidID[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID level of {#SNMPVALUE} <p>-</p> SNMP agent raidLevel[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID number of {#SNMPVALUE} <p>-</p> SNMP agent raidNum[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID size of {#SNMPVALUE} <p>-</p> SNMP agent raidSize[{#SNMPINDEX}]<p>Update: 1h</p><p>LLD</p>
RAID status of {#SNMPVALUE} <p>-</p> SNMP agent raidStatus[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
RAID units of {#SNMPVALUE} <p>-</p> SNMP agent raidUnits[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID used percent of {#SNMPVALUE} (%) <p>-</p> SNMP agent raidUsedPercentage[{#SNMPINDEX}]<p>Update: 1h</p><p>LLD</p>
Disk Capacity {#SNMPVALUE} <p>-</p> SNMP agent diskCapacity[{#SNMPINDEX}]<p>Update: 1h</p><p>LLD</p>
Disk ID {#SNMPVALUE} <p>-</p> SNMP agent diskID[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
Model of {#SNMPVALUE} <p>-</p> SNMP agent diskModel[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
Reallocate_Sector_Ct {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr5[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Power_On_hours{#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr9[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
End-to-End Error {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr184[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Temperature of {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr194[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Current__Pending_Sector {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr197[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
S.M.A.R.T. info of {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTHealthCheck[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Status of {#SNMPVALUE} <p>-</p> SNMP agent diskStatus[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Disk Tray Number {#SNMPVALUE} <p>-</p> SNMP agent diskTrayNum[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>

Triggers

Name Description Expression Priority
State of {#SNMPVALUE} on {HOST.NAME} is “Current Pending Sector” <p>-</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr197[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “End-to-End Error” <p>State “noDisk”</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr184[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “Reallocated_Sector_Ct” <p>State “rwError”</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr5[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is not “Ready” ({ITEM.VALUE1}) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/diskStatus[{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_ALARM} for 2 min <p>-</p> <p>Expression: min(/SNMP THECUS NAS/diskSMARTAttr194[{#SNMPINDEX}],2m)>51</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_WARNING} for 2min <p>-</p> <p>Expression: min(/SNMP THECUS NAS/diskSMARTAttr194[{#SNMPINDEX}],2m)>40</p><p>Recovery expression: </p> information
Free space is less than 5% on volume {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high
Free space is less than 10% on volume {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>90</p><p>Recovery expression: </p> warning
Free space is less than 20% on volume {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>80</p><p>Recovery expression: </p> information
Free space is less than 5% on volume {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high
Free space is less than 10% on volume {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>90</p><p>Recovery expression: </p> warning
Free space is less than 20% on volume {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>80</p><p>Recovery expression: </p> information
State of {#SNMPVALUE} on {HOST.NAME} is “Current Pending Sector” (LLD) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr197[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “End-to-End Error” (LLD) <p>State “noDisk”</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr184[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “Reallocated_Sector_Ct” (LLD) <p>State “rwError”</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr5[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is not “Ready” ({ITEM.VALUE1}) (LLD) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/diskStatus[{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_ALARM} for 2 min (LLD) <p>-</p> <p>Expression: min(/SNMP THECUS NAS/diskSMARTAttr194[{#SNMPINDEX}],2m)>51</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_WARNING} for 2min (LLD) <p>-</p> <p>Expression: min(/SNMP THECUS NAS/diskSMARTAttr194[{#SNMPINDEX}],2m)>40</p><p>Recovery expression: </p> information

SNMP THECUS NAS

Overview

Делал под Thecus N8900

Чтобы нормально получать данные через SNMP ставьте последние прошивки на устройства.

В принципе моя модель - это linux NAS. Через linux SNMPv2 практически все выдается, но в самой

морде есть mib-файл, на его основе и сделал данный шаблон.

Вопросы на 2135850@211.ru

Author

S.V.Sidenko

Macros used

Name Description Default Type
{$HD_TEMPERATURE_ALARM} <p>-</p> 51 Text macro
{$HD_TEMPERATURE_WARNING} <p>-</p> 40 Text macro
{$SNMP_PORT} <p>-</p> 161 Text macro

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
RAID discovery <p>-</p> SNMP agent nasRaid.discovery<p>Update: 1h</p>
Hard disks discovery <p>-</p> SNMP agent nasDisk.discovery<p>Update: 1h</p>

Items collected

Name Description Type Key and additional info
System fan status <p>-</p> SNMP agent systemFanStatus<p>Update: 60</p>
System vendor <p>-</p> SNMP agent systemVendor<p>Update: 3h</p>
System Mini-UPS Status <p>-</p> SNMP agent systemMiniUPSStatus<p>Update: 60</p>
System temperature <p>System temperature in centigrade</p> SNMP agent systemTemperature<p>Update: 60</p>
System firmware <p>-</p> SNMP agent systemFirmware<p>Update: 3h</p>
System status <p>-</p> SNMP agent systemStatus<p>Update: 60</p>
System model <p>-</p> SNMP agent systemModel<p>Update: 3h</p>
RAID ID of {#SNMPVALUE} <p>-</p> SNMP agent raidID[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID level of {#SNMPVALUE} <p>-</p> SNMP agent raidLevel[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID number of {#SNMPVALUE} <p>-</p> SNMP agent raidNum[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID size of {#SNMPVALUE} <p>-</p> SNMP agent raidSize[{#SNMPINDEX}]<p>Update: 1h</p><p>LLD</p>
RAID status of {#SNMPVALUE} <p>-</p> SNMP agent raidStatus[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
RAID units of {#SNMPVALUE} <p>-</p> SNMP agent raidUnits[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
RAID used percent of {#SNMPVALUE} (%) <p>-</p> SNMP agent raidUsedPercentage[{#SNMPINDEX}]<p>Update: 1h</p><p>LLD</p>
Disk Capacity {#SNMPVALUE} <p>-</p> SNMP agent diskCapacity[{#SNMPINDEX}]<p>Update: 1h</p><p>LLD</p>
Disk ID {#SNMPVALUE} <p>-</p> SNMP agent diskID[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
Model of {#SNMPVALUE} <p>-</p> SNMP agent diskModel[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>
Reallocate_Sector_Ct {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr5[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Power_On_hours{#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr9[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
End-to-End Error {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr184[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Temperature of {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr194[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Current__Pending_Sector {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTAttr197[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
S.M.A.R.T. info of {#SNMPVALUE} <p>-</p> SNMP agent diskSMARTHealthCheck[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Status of {#SNMPVALUE} <p>-</p> SNMP agent diskStatus[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>
Disk Tray Number {#SNMPVALUE} <p>-</p> SNMP agent diskTrayNum[{#SNMPINDEX}]<p>Update: 3h</p><p>LLD</p>

Triggers

Name Description Expression Priority
State of {#SNMPVALUE} on {HOST.NAME} is “Current Pending Sector” <p>-</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr197[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “End-to-End Error” <p>State “noDisk”</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr184[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “Reallocated_Sector_Ct” <p>State “rwError”</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr5[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is not “Ready” ({ITEM.VALUE1}) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/diskStatus[{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_ALARM} for 2 min <p>-</p> <p>Expression: min(/SNMP THECUS NAS/diskSMARTAttr194[{#SNMPINDEX}],2m)>51</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_WARNING} for 2min <p>-</p> <p>Expression: min(/SNMP THECUS NAS/diskSMARTAttr194[{#SNMPINDEX}],2m)>40</p><p>Recovery expression: </p> information
Free space is less than 5% on volume {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high
Free space is less than 10% on volume {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>90</p><p>Recovery expression: </p> warning
Free space is less than 20% on volume {#SNMPVALUE} <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>80</p><p>Recovery expression: </p> information
Free space is less than 5% on volume {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high
Free space is less than 10% on volume {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>90</p><p>Recovery expression: </p> warning
Free space is less than 20% on volume {#SNMPVALUE} (LLD) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/raidUsedPercentage[{#SNMPINDEX}])>80</p><p>Recovery expression: </p> information
State of {#SNMPVALUE} on {HOST.NAME} is “Current Pending Sector” (LLD) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr197[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “End-to-End Error” (LLD) <p>State “noDisk”</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr184[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is “Reallocated_Sector_Ct” (LLD) <p>State “rwError”</p> <p>Expression: last(/SNMP THECUS NAS/diskSMARTAttr5[{#SNMPINDEX}])>0</p><p>Recovery expression: </p> average
State of {#SNMPVALUE} on {HOST.NAME} is not “Ready” ({ITEM.VALUE1}) (LLD) <p>-</p> <p>Expression: last(/SNMP THECUS NAS/diskStatus[{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_ALARM} for 2 min (LLD) <p>-</p> <p>Expression: min(/SNMP THECUS NAS/diskSMARTAttr194[{#SNMPINDEX}],2m)>51</p><p>Recovery expression: </p> high
Temperature of {#SNMPVALUE} on {HOST.NAME} is over {$HD_TEMPERATURE_WARNING} for 2min (LLD) <p>-</p> <p>Expression: min(/SNMP THECUS NAS/diskSMARTAttr194[{#SNMPINDEX}],2m)>40</p><p>Recovery expression: </p> information