Uses SNMPv3
Predefined Auth and Priv method : SHA and AES
Variables under Macros, just one time update during host addition
hitesh-vinzoda
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Temperature Discovery - System | <p>-</p> | SNMP agent |
entPhySystemTemp[SENSOR]<p>Update: 5m</p> |
Fan RPM Discovery | <p>ENTITY-SENSOR-MIB::entPhySensorType The type of data returned by the associated entPhySensorValue object.</p> | SNMP agent |
entPhySensorType[FAN]<p>Update: 5m</p> |
Storage | <p>-</p> | SNMP agent |
hrStorageDescr<p>Update: 5m</p> |
Temperature Discovery - Core | <p>-</p> | SNMP agent |
entPhyCoreTemp[SENSOR]<p>Update: 5m</p> |
Interfaces | <p>-</p> | SNMP agent |
ifDescr<p>Update: 5m</p> |
Component Temperature Discovery | <p>ENTITY-SENSOR-MIB::entPhySensorType The type of data returned by the associated entPhySensorValue object.</p> | SNMP agent |
entPhySensorType[Temp]<p>Update: 5m</p> |
Interfaces Totals | <p>-</p> | SNMP agent |
snmp.discoverytotal<p>Update: 5m</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Core Temperature | <p>-</p> | SNMP agent |
entPhySensorValue.4<p>Update: 1m</p> |
System uptime | <p>-</p> | SNMP agent |
hrSystemUptime.0<p>Update: 15m</p> |
CPU utilization on management plane | <p>CPU load average over last 60 seconds. This value will match the value shown on the GUI dashboard-> resource information-> % CPU in PAN-OS 3.x</p> | SNMP agent |
hrProcessorLoad1<p>Update: 5m</p> |
Active TCP Sessions | <p>-</p> | SNMP agent |
panSessionActiveTcp.0<p>Update: 1m</p> |
Active UDP Sessions | <p>-</p> | SNMP agent |
panSessionActiveUdp.0<p>Update: 1m</p> |
Utilization of CPUs on dataplane that are used for system functions | <p>CPU load average over last 60 seconds</p> | SNMP agent |
hrProcessorLoad2<p>Update: 1m</p> |
System Temperature | <p>-</p> | SNMP agent |
entPhySensorValue.3<p>Update: 1m</p> |
System Name | <p>-</p> | SNMP agent |
sysName<p>Update: 1h</p> |
Chassis Type | <p>-</p> | SNMP agent |
panChassisType<p>Update: 1d</p> |
Session Utilization | <p>PAN-COMMON-MIB::panSessionUtilization Session table utilization percentage.</p> | SNMP agent |
panSessionUtilization<p>Update: 5m</p> |
Hardware Version | <p>-</p> | SNMP agent |
panSysHwVersion<p>Update: 1h</p> |
Total Active Sessions | <p>-</p> | SNMP agent |
panSessionActive.0<p>Update: 1m</p> |
PAN-OS Version | <p>-</p> | SNMP agent |
panSysSwVersion<p>Update: 1h</p> |
System Temperature - Operational Status of Sensor: $1 | <p>-</p> | SNMP agent |
entPhySystemTempOperStatus[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
System Temperature - Temperature of Sensor: $1 | <p>-</p> | SNMP agent |
entPhySystemTempValue[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
Operational status of $1 | <p>-</p> | SNMP agent |
entPhySensorOperStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Speed of $1 | <p>-</p> | SNMP agent |
entPhySensorValue[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
{#SNMPVALUE} Size | <p>-</p> | SNMP agent |
hrStorageSize[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
{#SNMPVALUE} Used | <p>-</p> | SNMP agent |
hrStorageUsed[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
Core Temperature - Operational Status of Sensor: $1 | <p>-</p> | SNMP agent |
entPhyCoreTempOperStatus[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
Core Temperature - Temperature of Sensor: $1 | <p>-</p> | SNMP agent |
entPhyCoreTempValue[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
Interface $1 admin status | <p>-</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming discarded packets on interface $1 | <p>-</p> | SNMP agent |
ifInDiscards[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming packets with errors on interface $1 | <p>-</p> | SNMP agent |
ifInErrors[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming non-unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifInNUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming traffic on interface $1 | <p>-</p> | SNMP agent |
ifInOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifInUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Interface $1 operational status | <p>-</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing discarded packets on interface $1 | <p>-</p> | SNMP agent |
ifOutDiscards[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing packets with errors on interface $1 | <p>-</p> | SNMP agent |
ifOutErrors[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing non-unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifOutNUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing traffic on interface $1 | <p>-</p> | SNMP agent |
ifOutOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifOutUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Temperature of $1 | <p>-</p> | SNMP agent |
entPhySensorTemp[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
Total broadcast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total multicast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total traffic incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total unicast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total broadcast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCOutBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total multicast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifHCOutMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total traffic outgoing on interface $1 | <p>-</p> | SNMP agent |
ifHCOutOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total unicast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifHCOutUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Broadcast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifInBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Multicast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifInMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Broadcast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifOutBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Multicast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifOutMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
There are no triggers in this template.
Uses SNMPv3
Predefined Auth and Priv method : SHA and AES
Variables under Macros, just one time update during host addition
hitesh-vinzoda
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Interfaces Totals | <p>-</p> | SNMP agent |
snmp.discoverytotal<p>Update: 5m</p> |
Temperature Discovery - Core | <p>-</p> | SNMP agent |
entPhyCoreTemp[SENSOR]<p>Update: 5m</p> |
Interfaces | <p>-</p> | SNMP agent |
ifDescr<p>Update: 5m</p> |
Temperature Discovery - System | <p>-</p> | SNMP agent |
entPhySystemTemp[SENSOR]<p>Update: 5m</p> |
Fan RPM Discovery | <p>ENTITY-SENSOR-MIB::entPhySensorType The type of data returned by the associated entPhySensorValue object.</p> | SNMP agent |
entPhySensorType[FAN]<p>Update: 5m</p> |
Component Temperature Discovery | <p>ENTITY-SENSOR-MIB::entPhySensorType The type of data returned by the associated entPhySensorValue object.</p> | SNMP agent |
entPhySensorType[Temp]<p>Update: 5m</p> |
Storage | <p>-</p> | SNMP agent |
hrStorageDescr<p>Update: 5m</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
CPU utilization on management plane | <p>CPU load average over last 60 seconds. This value will match the value shown on the GUI dashboard-> resource information-> % CPU in PAN-OS 3.x</p> | SNMP agent |
hrProcessorLoad1<p>Update: 5m</p> |
Session Utilization | <p>PAN-COMMON-MIB::panSessionUtilization Session table utilization percentage.</p> | SNMP agent |
panSessionUtilization<p>Update: 5m</p> |
Active UDP Sessions | <p>-</p> | SNMP agent |
panSessionActiveUdp.0<p>Update: 1m</p> |
System uptime | <p>-</p> | SNMP agent |
hrSystemUptime.0<p>Update: 15m</p> |
PAN-OS Version | <p>-</p> | SNMP agent |
panSysSwVersion<p>Update: 1h</p> |
Active TCP Sessions | <p>-</p> | SNMP agent |
panSessionActiveTcp.0<p>Update: 1m</p> |
Total Active Sessions | <p>-</p> | SNMP agent |
panSessionActive.0<p>Update: 1m</p> |
Utilization of CPUs on dataplane that are used for system functions | <p>CPU load average over last 60 seconds</p> | SNMP agent |
hrProcessorLoad2<p>Update: 1m</p> |
Core Temperature | <p>-</p> | SNMP agent |
entPhySensorValue.4<p>Update: 1m</p> |
Chassis Type | <p>-</p> | SNMP agent |
panChassisType<p>Update: 1d</p> |
System Temperature | <p>-</p> | SNMP agent |
entPhySensorValue.3<p>Update: 1m</p> |
System Name | <p>-</p> | SNMP agent |
sysName<p>Update: 1h</p> |
Hardware Version | <p>-</p> | SNMP agent |
panSysHwVersion<p>Update: 1h</p> |
Total broadcast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total multicast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total traffic incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total unicast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total broadcast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCOutBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total multicast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifHCOutMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total traffic outgoing on interface $1 | <p>-</p> | SNMP agent |
ifHCOutOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total unicast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifHCOutUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Broadcast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifInBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Multicast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifInMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Broadcast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifOutBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Multicast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifOutMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Core Temperature - Operational Status of Sensor: $1 | <p>-</p> | SNMP agent |
entPhyCoreTempOperStatus[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
Core Temperature - Temperature of Sensor: $1 | <p>-</p> | SNMP agent |
entPhyCoreTempValue[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
Interface $1 admin status | <p>-</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming discarded packets on interface $1 | <p>-</p> | SNMP agent |
ifInDiscards[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming packets with errors on interface $1 | <p>-</p> | SNMP agent |
ifInErrors[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming non-unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifInNUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming traffic on interface $1 | <p>-</p> | SNMP agent |
ifInOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifInUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Interface $1 operational status | <p>-</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing discarded packets on interface $1 | <p>-</p> | SNMP agent |
ifOutDiscards[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing packets with errors on interface $1 | <p>-</p> | SNMP agent |
ifOutErrors[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing non-unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifOutNUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing traffic on interface $1 | <p>-</p> | SNMP agent |
ifOutOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifOutUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
System Temperature - Operational Status of Sensor: $1 | <p>-</p> | SNMP agent |
entPhySystemTempOperStatus[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
System Temperature - Temperature of Sensor: $1 | <p>-</p> | SNMP agent |
entPhySystemTempValue[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
Operational status of $1 | <p>-</p> | SNMP agent |
entPhySensorOperStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Speed of $1 | <p>-</p> | SNMP agent |
entPhySensorValue[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Temperature of $1 | <p>-</p> | SNMP agent |
entPhySensorTemp[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
{#SNMPVALUE} Size | <p>-</p> | SNMP agent |
hrStorageSize[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
{#SNMPVALUE} Used | <p>-</p> | SNMP agent |
hrStorageUsed[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
There are no triggers in this template.
Uses SNMPv3
Predefined Auth and Priv method : SHA and AES
Variables under Macros, just one time update during host addition
hitesh-vinzoda
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Interfaces Totals | <p>-</p> | SNMP agent |
snmp.discoverytotal<p>Update: 5m</p> |
Temperature Discovery - Core | <p>-</p> | SNMP agent |
entPhyCoreTemp[SENSOR]<p>Update: 5m</p> |
Interfaces | <p>-</p> | SNMP agent |
ifDescr<p>Update: 5m</p> |
Temperature Discovery - System | <p>-</p> | SNMP agent |
entPhySystemTemp[SENSOR]<p>Update: 5m</p> |
Fan RPM Discovery | <p>ENTITY-SENSOR-MIB::entPhySensorType The type of data returned by the associated entPhySensorValue object.</p> | SNMP agent |
entPhySensorType[FAN]<p>Update: 5m</p> |
Component Temperature Discovery | <p>ENTITY-SENSOR-MIB::entPhySensorType The type of data returned by the associated entPhySensorValue object.</p> | SNMP agent |
entPhySensorType[Temp]<p>Update: 5m</p> |
Storage | <p>-</p> | SNMP agent |
hrStorageDescr<p>Update: 5m</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
CPU utilization on management plane | <p>CPU load average over last 60 seconds. This value will match the value shown on the GUI dashboard-> resource information-> % CPU in PAN-OS 3.x</p> | SNMP agent |
hrProcessorLoad1<p>Update: 5m</p> |
Session Utilization | <p>PAN-COMMON-MIB::panSessionUtilization Session table utilization percentage.</p> | SNMP agent |
panSessionUtilization<p>Update: 5m</p> |
Active UDP Sessions | <p>-</p> | SNMP agent |
panSessionActiveUdp.0<p>Update: 1m</p> |
System uptime | <p>-</p> | SNMP agent |
hrSystemUptime.0<p>Update: 15m</p> |
PAN-OS Version | <p>-</p> | SNMP agent |
panSysSwVersion<p>Update: 1h</p> |
Active TCP Sessions | <p>-</p> | SNMP agent |
panSessionActiveTcp.0<p>Update: 1m</p> |
Total Active Sessions | <p>-</p> | SNMP agent |
panSessionActive.0<p>Update: 1m</p> |
Utilization of CPUs on dataplane that are used for system functions | <p>CPU load average over last 60 seconds</p> | SNMP agent |
hrProcessorLoad2<p>Update: 1m</p> |
Core Temperature | <p>-</p> | SNMP agent |
entPhySensorValue.4<p>Update: 1m</p> |
Chassis Type | <p>-</p> | SNMP agent |
panChassisType<p>Update: 1d</p> |
System Temperature | <p>-</p> | SNMP agent |
entPhySensorValue.3<p>Update: 1m</p> |
System Name | <p>-</p> | SNMP agent |
sysName<p>Update: 1h</p> |
Hardware Version | <p>-</p> | SNMP agent |
panSysHwVersion<p>Update: 1h</p> |
Total broadcast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total multicast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total traffic incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total unicast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCInUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total broadcast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifHCOutBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total multicast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifHCOutMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total traffic outgoing on interface $1 | <p>-</p> | SNMP agent |
ifHCOutOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Total unicast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifHCOutUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Broadcast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifInBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Multicast packets incoming on interface $1 | <p>-</p> | SNMP agent |
ifInMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Broadcast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifOutBroadcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Multicast packets outgoing on interface $1 | <p>-</p> | SNMP agent |
ifOutMulticastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Core Temperature - Operational Status of Sensor: $1 | <p>-</p> | SNMP agent |
entPhyCoreTempOperStatus[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
Core Temperature - Temperature of Sensor: $1 | <p>-</p> | SNMP agent |
entPhyCoreTempValue[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
Interface $1 admin status | <p>-</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming discarded packets on interface $1 | <p>-</p> | SNMP agent |
ifInDiscards[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming packets with errors on interface $1 | <p>-</p> | SNMP agent |
ifInErrors[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming non-unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifInNUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming traffic on interface $1 | <p>-</p> | SNMP agent |
ifInOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Incoming unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifInUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Interface $1 operational status | <p>-</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing discarded packets on interface $1 | <p>-</p> | SNMP agent |
ifOutDiscards[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing packets with errors on interface $1 | <p>-</p> | SNMP agent |
ifOutErrors[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing non-unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifOutNUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing traffic on interface $1 | <p>-</p> | SNMP agent |
ifOutOctets[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Outgoing unicast packets on interface $1 | <p>-</p> | SNMP agent |
ifOutUcastPkts[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
System Temperature - Operational Status of Sensor: $1 | <p>-</p> | SNMP agent |
entPhySystemTempOperStatus[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
System Temperature - Temperature of Sensor: $1 | <p>-</p> | SNMP agent |
entPhySystemTempValue[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
Operational status of $1 | <p>-</p> | SNMP agent |
entPhySensorOperStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Speed of $1 | <p>-</p> | SNMP agent |
entPhySensorValue[{#SNMPVALUE}]<p>Update: 1m</p><p>LLD</p> |
Temperature of $1 | <p>-</p> | SNMP agent |
entPhySensorTemp[{#SENSORNAME}]<p>Update: 30s</p><p>LLD</p> |
{#SNMPVALUE} Size | <p>-</p> | SNMP agent |
hrStorageSize[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
{#SNMPVALUE} Used | <p>-</p> | SNMP agent |
hrStorageUsed[{#SNMPINDEX}]<p>Update: 5m</p><p>LLD</p> |
There are no triggers in this template.