Built on 3.2, this template supports the following SNMP OIDs for monitoring of DSL stats
ADSL-LINE-MIB::adslAtucCurrSnrMgn
ADSL-LINE-MIB::adslAtucCurrAtn
ADSL-LINE-MIB::adslAtucCurrOutputPwr
ADSL-LINE-MIB::adslAtucCurrAttainableRate
ADSL-LINE-MIB::adslAturCurrSnrMgn
ADSL-LINE-MIB::adslAturCurrAtn
ADSL-LINE-MIB::adslAturCurrOutputPwr
ADSL-LINE-MIB::adslAturCurrAttainableRate
ADSL-LINE-MIB::adslAtucChanCurrTxRate
ADSL-LINE-MIB::adslAturChanCurrTxRate
Also monitors DSL errors and resyncs.
Tested against a Cisco 887VA, should work for any other devices that has the standard ADSL OID of .1.3.6.1.2.1.10.94.1
SirLagz
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
DSL Upstream SNR | <p>-</p> | SNMP agent |
DSL-US-SNR<p>Update: 60</p> |
DSL Upstream Attenuation | <p>-</p> | SNMP agent |
DSL-US-Aten<p>Update: 60</p> |
DSL Downstream Bitrate Maximum | <p>-</p> | SNMP agent |
DSL-DS-BRM<p>Update: 60</p> |
DSL Upstream Output Power | <p>-</p> | SNMP agent |
DSL-US-Pwr<p>Update: 60</p> |
DSL Upstream Stat - Total Uncorrected Blocks | <p>-</p> | SNMP agent |
DSL-USStat-UncorrectedBlks<p>Update: 60</p> |
DSL Upstream Errors - Loss Of Power | <p>-</p> | SNMP agent |
DSL-USErr-LPRS<p>Update: 60</p> |
DSL Downstream Stat - Line Sync Attempts | <p>-</p> | SNMP agent |
DSL-DSStat-PerfInits<p>Update: 60</p> |
DSL Downstream Stat - Errorred Seconds | <p>-</p> | SNMP agent |
DSL-DSStat-ESs<p>Update: 60</p> |
DSL Downstream Errors - Loss Of Power | <p>-</p> | SNMP agent |
DSL-DSErr-LPRS<p>Update: 60</p> |
DSL Downstream Attenuation | <p>-</p> | SNMP agent |
DSL-DS-Aten<p>Update: 60</p> |
DSL Upstream Bitrate Maximum | <p>-</p> | SNMP agent |
DSL-US-BRM<p>Update: 60</p> |
DSL Downstream SNR | <p>-</p> | SNMP agent |
DSL-DS-SNR<p>Update: 60</p> |
DSL Downstream Stat - Corrected Blocks | <p>-</p> | SNMP agent |
DSL-DSStat-CorrectedBlks<p>Update: 60</p> |
DSL Downstream Output Power | <p>-</p> | SNMP agent |
DSL-DS-Pwr<p>Update: 60</p> |
DSL Upstream Stat - Errorred Seconds | <p>-</p> | SNMP agent |
DSL-USStat-ESs<p>Update: 60</p> |
DSL Downstream Bitrate Current | <p>-</p> | SNMP agent |
DSL-DS-BRC<p>Update: 60</p> |
DSL Upstream Bitrate Current | <p>-</p> | SNMP agent |
DSL-US-BRC<p>Update: 60</p> |
DSL Upstream Errors - Loss Of Framing | <p>-</p> | SNMP agent |
DSL-USErr-LOFS<p>Update: 60</p> |
DSL Downstream Errors - Loss Of Signal | <p>-</p> | SNMP agent |
DSL-DSErr-LOSS<p>Update: 60</p> |
DSL Downstream Stat - Uncorrected Blocks | <p>-</p> | SNMP agent |
DSL-DSStat-UncorrectedBlks<p>Update: 60</p> |
DSL Upstream Stat - Total Corrected Blocks | <p>-</p> | SNMP agent |
DSL-USStat-CorrectedBlks<p>Update: 60</p> |
DSL Downstream Errors - Loss Of Framing | <p>-</p> | SNMP agent |
DSL-DSErr-LOFS<p>Update: 60</p> |
DSL Upstream Errors - Loss Of Signal | <p>-</p> | SNMP agent |
DSL-USErr-LOSS<p>Update: 60</p> |
There are no triggers in this template.
Built on 3.2, this template supports the following SNMP OIDs for monitoring of DSL stats
ADSL-LINE-MIB::adslAtucCurrSnrMgn
ADSL-LINE-MIB::adslAtucCurrAtn
ADSL-LINE-MIB::adslAtucCurrOutputPwr
ADSL-LINE-MIB::adslAtucCurrAttainableRate
ADSL-LINE-MIB::adslAturCurrSnrMgn
ADSL-LINE-MIB::adslAturCurrAtn
ADSL-LINE-MIB::adslAturCurrOutputPwr
ADSL-LINE-MIB::adslAturCurrAttainableRate
ADSL-LINE-MIB::adslAtucChanCurrTxRate
ADSL-LINE-MIB::adslAturChanCurrTxRate
Also monitors DSL errors and resyncs.
Tested against a Cisco 887VA, should work for any other devices that has the standard ADSL OID of .1.3.6.1.2.1.10.94.1
SirLagz
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
DSL Downstream Stat - Uncorrected Blocks | <p>-</p> | SNMP agent |
DSL-DSStat-UncorrectedBlks<p>Update: 60</p> |
DSL Downstream Stat - Errorred Seconds | <p>-</p> | SNMP agent |
DSL-DSStat-ESs<p>Update: 60</p> |
DSL Downstream Errors - Loss Of Power | <p>-</p> | SNMP agent |
DSL-DSErr-LPRS<p>Update: 60</p> |
DSL Upstream Bitrate Current | <p>-</p> | SNMP agent |
DSL-US-BRC<p>Update: 60</p> |
DSL Downstream Output Power | <p>-</p> | SNMP agent |
DSL-DS-Pwr<p>Update: 60</p> |
DSL Upstream Bitrate Maximum | <p>-</p> | SNMP agent |
DSL-US-BRM<p>Update: 60</p> |
DSL Downstream Stat - Line Sync Attempts | <p>-</p> | SNMP agent |
DSL-DSStat-PerfInits<p>Update: 60</p> |
DSL Downstream Errors - Loss Of Signal | <p>-</p> | SNMP agent |
DSL-DSErr-LOSS<p>Update: 60</p> |
DSL Upstream SNR | <p>-</p> | SNMP agent |
DSL-US-SNR<p>Update: 60</p> |
DSL Downstream Bitrate Current | <p>-</p> | SNMP agent |
DSL-DS-BRC<p>Update: 60</p> |
DSL Downstream Stat - Corrected Blocks | <p>-</p> | SNMP agent |
DSL-DSStat-CorrectedBlks<p>Update: 60</p> |
DSL Upstream Attenuation | <p>-</p> | SNMP agent |
DSL-US-Aten<p>Update: 60</p> |
DSL Upstream Errors - Loss Of Signal | <p>-</p> | SNMP agent |
DSL-USErr-LOSS<p>Update: 60</p> |
DSL Downstream Bitrate Maximum | <p>-</p> | SNMP agent |
DSL-DS-BRM<p>Update: 60</p> |
DSL Upstream Errors - Loss Of Power | <p>-</p> | SNMP agent |
DSL-USErr-LPRS<p>Update: 60</p> |
DSL Downstream Attenuation | <p>-</p> | SNMP agent |
DSL-DS-Aten<p>Update: 60</p> |
DSL Downstream SNR | <p>-</p> | SNMP agent |
DSL-DS-SNR<p>Update: 60</p> |
DSL Upstream Stat - Errorred Seconds | <p>-</p> | SNMP agent |
DSL-USStat-ESs<p>Update: 60</p> |
DSL Upstream Output Power | <p>-</p> | SNMP agent |
DSL-US-Pwr<p>Update: 60</p> |
DSL Downstream Errors - Loss Of Framing | <p>-</p> | SNMP agent |
DSL-DSErr-LOFS<p>Update: 60</p> |
DSL Upstream Stat - Total Corrected Blocks | <p>-</p> | SNMP agent |
DSL-USStat-CorrectedBlks<p>Update: 60</p> |
DSL Upstream Stat - Total Uncorrected Blocks | <p>-</p> | SNMP agent |
DSL-USStat-UncorrectedBlks<p>Update: 60</p> |
DSL Upstream Errors - Loss Of Framing | <p>-</p> | SNMP agent |
DSL-USErr-LOFS<p>Update: 60</p> |
There are no triggers in this template.
Built on 3.2, this template supports the following SNMP OIDs for monitoring of DSL stats
ADSL-LINE-MIB::adslAtucCurrSnrMgn
ADSL-LINE-MIB::adslAtucCurrAtn
ADSL-LINE-MIB::adslAtucCurrOutputPwr
ADSL-LINE-MIB::adslAtucCurrAttainableRate
ADSL-LINE-MIB::adslAturCurrSnrMgn
ADSL-LINE-MIB::adslAturCurrAtn
ADSL-LINE-MIB::adslAturCurrOutputPwr
ADSL-LINE-MIB::adslAturCurrAttainableRate
ADSL-LINE-MIB::adslAtucChanCurrTxRate
ADSL-LINE-MIB::adslAturChanCurrTxRate
Also monitors DSL errors and resyncs.
Tested against a Cisco 887VA, should work for any other devices that has the standard ADSL OID of .1.3.6.1.2.1.10.94.1
SirLagz
There are no macros links in this template.
There are no template links in this template.
There are no discovery rules in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
DSL Downstream Stat - Uncorrected Blocks | <p>-</p> | SNMP agent |
DSL-DSStat-UncorrectedBlks<p>Update: 60</p> |
DSL Downstream Stat - Errorred Seconds | <p>-</p> | SNMP agent |
DSL-DSStat-ESs<p>Update: 60</p> |
DSL Downstream Errors - Loss Of Power | <p>-</p> | SNMP agent |
DSL-DSErr-LPRS<p>Update: 60</p> |
DSL Upstream Bitrate Current | <p>-</p> | SNMP agent |
DSL-US-BRC<p>Update: 60</p> |
DSL Downstream Output Power | <p>-</p> | SNMP agent |
DSL-DS-Pwr<p>Update: 60</p> |
DSL Upstream Bitrate Maximum | <p>-</p> | SNMP agent |
DSL-US-BRM<p>Update: 60</p> |
DSL Downstream Stat - Line Sync Attempts | <p>-</p> | SNMP agent |
DSL-DSStat-PerfInits<p>Update: 60</p> |
DSL Downstream Errors - Loss Of Signal | <p>-</p> | SNMP agent |
DSL-DSErr-LOSS<p>Update: 60</p> |
DSL Upstream SNR | <p>-</p> | SNMP agent |
DSL-US-SNR<p>Update: 60</p> |
DSL Downstream Bitrate Current | <p>-</p> | SNMP agent |
DSL-DS-BRC<p>Update: 60</p> |
DSL Downstream Stat - Corrected Blocks | <p>-</p> | SNMP agent |
DSL-DSStat-CorrectedBlks<p>Update: 60</p> |
DSL Upstream Attenuation | <p>-</p> | SNMP agent |
DSL-US-Aten<p>Update: 60</p> |
DSL Upstream Errors - Loss Of Signal | <p>-</p> | SNMP agent |
DSL-USErr-LOSS<p>Update: 60</p> |
DSL Downstream Bitrate Maximum | <p>-</p> | SNMP agent |
DSL-DS-BRM<p>Update: 60</p> |
DSL Upstream Errors - Loss Of Power | <p>-</p> | SNMP agent |
DSL-USErr-LPRS<p>Update: 60</p> |
DSL Downstream Attenuation | <p>-</p> | SNMP agent |
DSL-DS-Aten<p>Update: 60</p> |
DSL Downstream SNR | <p>-</p> | SNMP agent |
DSL-DS-SNR<p>Update: 60</p> |
DSL Upstream Stat - Errorred Seconds | <p>-</p> | SNMP agent |
DSL-USStat-ESs<p>Update: 60</p> |
DSL Upstream Output Power | <p>-</p> | SNMP agent |
DSL-US-Pwr<p>Update: 60</p> |
DSL Downstream Errors - Loss Of Framing | <p>-</p> | SNMP agent |
DSL-DSErr-LOFS<p>Update: 60</p> |
DSL Upstream Stat - Total Corrected Blocks | <p>-</p> | SNMP agent |
DSL-USStat-CorrectedBlks<p>Update: 60</p> |
DSL Upstream Stat - Total Uncorrected Blocks | <p>-</p> | SNMP agent |
DSL-USStat-UncorrectedBlks<p>Update: 60</p> |
DSL Upstream Errors - Loss Of Framing | <p>-</p> | SNMP agent |
DSL-USErr-LOFS<p>Update: 60</p> |
There are no triggers in this template.