There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
ZoneDirector Eth | <p>-</p> | SNMP agent |
ZDEthName[{#SNMPVALUE}]<p>Update: 3600</p> |
Ruckus APs | <p>-</p> | SNMP agent |
AP-[{#SNMPVALUE}]<p>Update: 3600</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
ZoneDirector Total Users | <p>-</p> | SNMP agent |
ruckusZDSystemStatsAllNumSta<p>Update: 30</p> |
ZoneDirector System Model | <p>-</p> | SNMP agent |
ruckusZDSystemModel.0<p>Update: 3600</p> |
ZoneDirector System Name | <p>-</p> | SNMP agent |
ruckusZDSystemName.0<p>Update: 3600</p> |
ZoneDirector Serial Number | <p>-</p> | SNMP agent |
ruckusZDSystemSerialNumber.0<p>Update: 3600</p> |
ICMP loss | <p>-</p> | Simple check |
icmppingloss<p>Update: 60</p> |
ZoneDirector System Version | <p>-</p> | SNMP agent |
ruckusZDSystemVersion.0<p>Update: 3600</p> |
ICMP response time | <p>-</p> | Simple check |
icmppingsec<p>Update: 60</p> |
ZoneDirector MAC Adress | <p>-</p> | SNMP agent |
ruckusZDSystemMacAddr.0<p>Update: 3600</p> |
ZoneDirector Total Auth Clients | <p>-</p> | SNMP agent |
ruckusZDSystemStatsNumSta.0<p>Update: 30</p> |
ICMP ping | <p>-</p> | Simple check |
icmpping<p>Update: 60</p> |
ZoneDirector CPU Utilization | <p>-</p> | SNMP agent |
ruckusZDSystemCPUUTIL.0<p>Update: 30</p> |
Status $1 | <p>-</p> | SNMP agent |
ruckusZDEthStatus[{#SNMPVALUE}]<p>Update: 30</p><p>LLD</p> |
AP $1 : Auth Clients | <p>-</p> | SNMP agent |
ruckusZDWLANAPNumSta[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
AP Status $1 | <p>-</p> | SNMP agent |
ruckusZDWLANAPStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
Acces Point {#SNMPVALUE} is Offline | <p>-</p> | <p>Expression: {Template SNMP Ruckus Zonedirector:ruckusZDWLANAPStatus[{#SNMPVALUE}].last(0)}=0</p><p>Recovery expression: </p> | average |
Port {#SNMPVALUE} is Down | <p>-</p> | <p>Expression: {Template SNMP Ruckus Zonedirector:ruckusZDEthStatus[{#SNMPVALUE}].last(0)}=2</p><p>Recovery expression: </p> | high |
Port {#SNMPVALUE} is Down (LLD) | <p>-</p> | <p>Expression: {Template SNMP Ruckus Zonedirector:ruckusZDEthStatus[{#SNMPVALUE}].last(0)}=2</p><p>Recovery expression: </p> | high |
Acces Point {#SNMPVALUE} is Offline (LLD) | <p>-</p> | <p>Expression: {Template SNMP Ruckus Zonedirector:ruckusZDWLANAPStatus[{#SNMPVALUE}].last(0)}=0</p><p>Recovery expression: </p> | average |
In order to get this template working, you need at least Firmware 9.10 .
Inventory template
General:
-CPU Utilization
-ZoneDirector MAC Adress
-ZoneDirector Serial Number
-ZoneDirector System Model
-ZoneDirector System Name
-ZoneDirector System Version
Acces Points:
-AP Status (via Discovery rules) + Triggers
Interfaces:
-Status of interface (eth0,…) + Triggers
Users:
-Authenticated Users on AP
-Total Authenticated users
-Total connected users ( Authenticated and not-authenticated)
If you are using Zabbix 2.4, you need to add value mappings!
Administration => General => Value Mapping => Create ValueMap
RuckusAPStatus
0 ⇒ Disconnected
1 ⇒ Connected
2 ⇒ ApprovalPending
3 ⇒ UpgradingFirmware
4 ⇒ Provisioning
ruckusZDEthStatus
1 ⇒ Up
2 ⇒ Down
Pieter-Jan Lamont
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
ZoneDirector Eth | <p>-</p> | SNMP agent |
ZDEthName[{#SNMPVALUE}]<p>Update: 3600</p> |
Ruckus APs | <p>-</p> | SNMP agent |
AP-[{#SNMPVALUE}]<p>Update: 3600</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
ICMP ping | <p>-</p> | Simple check |
icmpping<p>Update: 60</p> |
ZoneDirector Serial Number | <p>-</p> | SNMP agent |
ruckusZDSystemSerialNumber.0<p>Update: 3600</p> |
ZoneDirector Total Users | <p>-</p> | SNMP agent |
ruckusZDSystemStatsAllNumSta<p>Update: 30</p> |
ZoneDirector System Name | <p>-</p> | SNMP agent |
ruckusZDSystemName.0<p>Update: 3600</p> |
ICMP loss | <p>-</p> | Simple check |
icmppingloss<p>Update: 60</p> |
ZoneDirector System Model | <p>-</p> | SNMP agent |
ruckusZDSystemModel.0<p>Update: 3600</p> |
ZoneDirector CPU Utilization | <p>-</p> | SNMP agent |
ruckusZDSystemCPUUTIL.0<p>Update: 30</p> |
ZoneDirector Total Auth Clients | <p>-</p> | SNMP agent |
ruckusZDSystemStatsNumSta.0<p>Update: 30</p> |
ICMP response time | <p>-</p> | Simple check |
icmppingsec<p>Update: 60</p> |
ZoneDirector System Version | <p>-</p> | SNMP agent |
ruckusZDSystemVersion.0<p>Update: 3600</p> |
ZoneDirector MAC Adress | <p>-</p> | SNMP agent |
ruckusZDSystemMacAddr.0<p>Update: 3600</p> |
Status $1 | <p>-</p> | SNMP agent |
ruckusZDEthStatus[{#SNMPVALUE}]<p>Update: 30</p><p>LLD</p> |
AP $1 : Auth Clients | <p>-</p> | SNMP agent |
ruckusZDWLANAPNumSta[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
AP Status $1 | <p>-</p> | SNMP agent |
ruckusZDWLANAPStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
Acces Point {#SNMPVALUE} is Offline | <p>-</p> | <p>Expression: last(/SNMP Ruckus Zonedirector/ruckusZDWLANAPStatus[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> | average |
Port {#SNMPVALUE} is Down | <p>-</p> | <p>Expression: last(/SNMP Ruckus Zonedirector/ruckusZDEthStatus[{#SNMPVALUE}])=2</p><p>Recovery expression: </p> | high |
Port {#SNMPVALUE} is Down (LLD) | <p>-</p> | <p>Expression: last(/SNMP Ruckus Zonedirector/ruckusZDEthStatus[{#SNMPVALUE}])=2</p><p>Recovery expression: </p> | high |
Acces Point {#SNMPVALUE} is Offline (LLD) | <p>-</p> | <p>Expression: last(/SNMP Ruckus Zonedirector/ruckusZDWLANAPStatus[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> | average |
In order to get this template working, you need at least Firmware 9.10 .
Inventory template
General:
-CPU Utilization
-ZoneDirector MAC Adress
-ZoneDirector Serial Number
-ZoneDirector System Model
-ZoneDirector System Name
-ZoneDirector System Version
Acces Points:
-AP Status (via Discovery rules) + Triggers
Interfaces:
-Status of interface (eth0,…) + Triggers
Users:
-Authenticated Users on AP
-Total Authenticated users
-Total connected users ( Authenticated and not-authenticated)
If you are using Zabbix 2.4, you need to add value mappings!
Administration => General => Value Mapping => Create ValueMap
RuckusAPStatus
0 ⇒ Disconnected
1 ⇒ Connected
2 ⇒ ApprovalPending
3 ⇒ UpgradingFirmware
4 ⇒ Provisioning
ruckusZDEthStatus
1 ⇒ Up
2 ⇒ Down
Pieter-Jan Lamont
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
ZoneDirector Eth | <p>-</p> | SNMP agent |
ZDEthName[{#SNMPVALUE}]<p>Update: 3600</p> |
Ruckus APs | <p>-</p> | SNMP agent |
AP-[{#SNMPVALUE}]<p>Update: 3600</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
ICMP ping | <p>-</p> | Simple check |
icmpping<p>Update: 60</p> |
ZoneDirector Serial Number | <p>-</p> | SNMP agent |
ruckusZDSystemSerialNumber.0<p>Update: 3600</p> |
ZoneDirector Total Users | <p>-</p> | SNMP agent |
ruckusZDSystemStatsAllNumSta<p>Update: 30</p> |
ZoneDirector System Name | <p>-</p> | SNMP agent |
ruckusZDSystemName.0<p>Update: 3600</p> |
ICMP loss | <p>-</p> | Simple check |
icmppingloss<p>Update: 60</p> |
ZoneDirector System Model | <p>-</p> | SNMP agent |
ruckusZDSystemModel.0<p>Update: 3600</p> |
ZoneDirector CPU Utilization | <p>-</p> | SNMP agent |
ruckusZDSystemCPUUTIL.0<p>Update: 30</p> |
ZoneDirector Total Auth Clients | <p>-</p> | SNMP agent |
ruckusZDSystemStatsNumSta.0<p>Update: 30</p> |
ICMP response time | <p>-</p> | Simple check |
icmppingsec<p>Update: 60</p> |
ZoneDirector System Version | <p>-</p> | SNMP agent |
ruckusZDSystemVersion.0<p>Update: 3600</p> |
ZoneDirector MAC Adress | <p>-</p> | SNMP agent |
ruckusZDSystemMacAddr.0<p>Update: 3600</p> |
Status $1 | <p>-</p> | SNMP agent |
ruckusZDEthStatus[{#SNMPVALUE}]<p>Update: 30</p><p>LLD</p> |
AP $1 : Auth Clients | <p>-</p> | SNMP agent |
ruckusZDWLANAPNumSta[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
AP Status $1 | <p>-</p> | SNMP agent |
ruckusZDWLANAPStatus[{#SNMPVALUE}]<p>Update: 60</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
Acces Point {#SNMPVALUE} is Offline | <p>-</p> | <p>Expression: last(/SNMP Ruckus Zonedirector/ruckusZDWLANAPStatus[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> | average |
Port {#SNMPVALUE} is Down | <p>-</p> | <p>Expression: last(/SNMP Ruckus Zonedirector/ruckusZDEthStatus[{#SNMPVALUE}])=2</p><p>Recovery expression: </p> | high |
Port {#SNMPVALUE} is Down (LLD) | <p>-</p> | <p>Expression: last(/SNMP Ruckus Zonedirector/ruckusZDEthStatus[{#SNMPVALUE}])=2</p><p>Recovery expression: </p> | high |
Acces Point {#SNMPVALUE} is Offline (LLD) | <p>-</p> | <p>Expression: last(/SNMP Ruckus Zonedirector/ruckusZDWLANAPStatus[{#SNMPVALUE}])=0</p><p>Recovery expression: </p> | average |