Cisco SNMP v3 Discovery for Interface Monitoring
Template use this macros:
{$SNMP_SECNAME} security name ( snmpv3 Username )
{$SNMP_AUTH} authentication password.
{$SNMP_PRIV} private password.
iinclude this data :
Admin status of interface
Operational status of interface
Description of interface
incomming traffic
Outgoing traffic
Omid Hosseini
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
network interface | <p>-</p> | SNMP agent |
ifDescr<p>Update: 1h</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Number of network interfaces | <p>-</p> | SNMP agent |
ifNumber<p>Update: 1h</p> |
Admin status of interface {#SNMPVALUE} | <p>-</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Description of interface {#SNMPVALUE} | <p>-</p> | SNMP agent |
ifDescr[{#SNMPVALUE}]<p>Update: 1h</p><p>LLD</p> |
incomming traffic on $1 | <p>-</p> | SNMP agent |
ifInOctets.[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Operational status of interface {#SNMPVALUE} | <p>-</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Outgoing traffic on $1 | <p>-</p> | SNMP agent |
ifOutOctets.[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
There are no triggers in this template.
Cisco SNMP v3 Discovery for Interface Monitoring
Template use this macros:
{$SNMP_SECNAME} security name ( snmpv3 Username )
{$SNMP_AUTH} authentication password.
{$SNMP_PRIV} private password.
iinclude this data :
Admin status of interface
Operational status of interface
Description of interface
incomming traffic
Outgoing traffic
Omid Hosseini
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
network interface | <p>-</p> | SNMP agent |
ifDescr<p>Update: 1h</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Number of network interfaces | <p>-</p> | SNMP agent |
ifNumber<p>Update: 1h</p> |
Admin status of interface {#SNMPVALUE} | <p>-</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Description of interface {#SNMPVALUE} | <p>-</p> | SNMP agent |
ifDescr[{#SNMPVALUE}]<p>Update: 1h</p><p>LLD</p> |
incomming traffic on $1 | <p>-</p> | SNMP agent |
ifInOctets.[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Operational status of interface {#SNMPVALUE} | <p>-</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Outgoing traffic on $1 | <p>-</p> | SNMP agent |
ifOutOctets.[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
There are no triggers in this template.
Cisco SNMP v3 Discovery for Interface Monitoring
Template use this macros:
{$SNMP_SECNAME} security name ( snmpv3 Username )
{$SNMP_AUTH} authentication password.
{$SNMP_PRIV} private password.
iinclude this data :
Admin status of interface
Operational status of interface
Description of interface
incomming traffic
Outgoing traffic
Omid Hosseini
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
network interface | <p>-</p> | SNMP agent |
ifDescr<p>Update: 1h</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Number of network interfaces | <p>-</p> | SNMP agent |
ifNumber<p>Update: 1h</p> |
Admin status of interface {#SNMPVALUE} | <p>-</p> | SNMP agent |
ifAdminStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Description of interface {#SNMPVALUE} | <p>-</p> | SNMP agent |
ifDescr[{#SNMPVALUE}]<p>Update: 1h</p><p>LLD</p> |
incomming traffic on $1 | <p>-</p> | SNMP agent |
ifInOctets.[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Operational status of interface {#SNMPVALUE} | <p>-</p> | SNMP agent |
ifOperStatus[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
Outgoing traffic on $1 | <p>-</p> | SNMP agent |
ifOutOctets.[{#SNMPVALUE}]<p>Update: 30s</p><p>LLD</p> |
There are no triggers in this template.