Available versions




Template Cisco General

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”].nodata(10m)}=0</p><p>Recovery expression: </p> average    

Template_Cisco_ASR_9K

Macros used

There are no macros links in this template.

Name
Template Cisco General
Template_Cisco_Traps

Discovery rules

Name Description Type Key and additional info
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
Flash Devices <p>CISCO-FLASH-MIB::ciscoFlashDeviceDescr Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: System flash - for the primary Flash used to store full system images. Boot flash - for the secondary Flash used to store bootstrap images. The device description will always be available for a removable device, even when the device has been removed.</p> SNMP agent ciscoFlashDeviceDescr<p>Update: 300</p>
Memory Pool <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName<p>Update: 300</p>
CPU <p>CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero.</p> SNMP agent cpmCPUTotalPhysicalIndex<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Amperage]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[FAN]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[“Fan Tray”]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Load]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Module]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[“Power Supply”]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Temperature]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Voltage]<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
Size of Flash Device “$1” <p>CISCO-FLASH-MIB::ciscoFlashDeviceSizeExtended Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. This object is a 64-bit version of ciscoFlashDeviceSize.</p> SNMP agent ciscoFlashDeviceSizeExtended[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Free memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree Indicates the number of bytes from the memory pool that are currently unused on the managed device.</p> SNMP agent ciscoMemoryPoolFree[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
Name of Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Used memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.</p> SNMP agent ciscoMemoryPoolUsed[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p>    
Utilization on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUtilization5Min This is the memory pool utilization for 5 minutes.</p> SNMP agent ciscoMemoryPoolUtilization5Min[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p>    
CPU #$1 Usage 1min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal1minRev The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal1minRev[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
CPU #$1 Usage 5min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5minRev The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal5minRev[{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
CPU #$1 Usage 5sec Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5secRev The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonIntervalValue.</p> SNMP agent cpmCPUTotal5secRev[{#SNMPINDEX}]<p>Update: 30</p><p>LLD</p>    
$2 of Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Amperage]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Amperage]<p>Update: 60</p><p>LLD</p>    
Speed of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
Status of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
Manufacturer of $2 “$1” <p>ENTITY-MIB::entPhysicalMfgName The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).</p> SNMP agent entPhysicalMfgName[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 86400</p><p>LLD</p>    
Model Name of $2 “$1” <p>ENTITY-MIB::entPhysicalModelName The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.</p> SNMP agent entPhysicalModelName[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 86400</p><p>LLD</p>    
Operational Status of $2 “$1” <p>CISCO-ENTITY-FRU-CONTROL-MIB::cefcFanTrayOperStatus The operational state of the fan or fan tray.</p> SNMP agent cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 60</p><p>LLD</p>    
Serial Number of $2 “$1” <p>ENTITY-MIB::entPhysicalSerialNum The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).</p> SNMP agent entPhysicalSerialNum[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 3600</p><p>LLD</p>    
Status of $2 Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Load]<p>Update: 60</p><p>LLD</p>    
Value of $2 Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Load]<p>Update: 60</p><p>LLD</p>    
Manufacturer of $2 “$1” <p>ENTITY-MIB::entPhysicalMfgName The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).</p> SNMP agent entPhysicalMfgName[”{#SNMPVALUE}”,”Module”]<p>Update: 86400</p><p>LLD</p>    
Model Name of $2 “$1” <p>ENTITY-MIB::entPhysicalModelName The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.</p> SNMP agent entPhysicalModelName[”{#SNMPVALUE}”,”Module”]<p>Update: 86400</p><p>LLD</p>    
Operational Status of $2 “$1” <p>ENTITY-STATE-MIB::entStateOper The operational state for this entity.</p> SNMP agent entStateOper[”{#SNMPVALUE}”,”Module”]<p>Update: 60</p><p>LLD</p>    
Serial Number of $2 “$1” <p>ENTITY-MIB::entPhysicalSerialNum The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).</p> SNMP agent entPhysicalSerialNum[”{#SNMPVALUE}”,”Module”]<p>Update: 3600</p><p>LLD</p>    
Current Supplied by $2 “$1” <p>CISCO-ENTITY-FRU-CONTROL-MIB::cefcFRUCurrent Current supplied by the FRU (positive values) or current required to operate the FRU (negative values).</p> SNMP agent cefcFRUCurrent[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 600</p><p>LLD</p>    
Manufacturer of $2 “$1” <p>ENTITY-MIB::entPhysicalMfgName The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).</p> SNMP agent entPhysicalMfgName[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 86400</p><p>LLD</p>    
Model Name of $2 “$1” <p>ENTITY-MIB::entPhysicalModelName The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.</p> SNMP agent entPhysicalModelName[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 86400</p><p>LLD</p>    
Operational Status of $2 “$1” <p>CISCO-ENTITY-FRU-CONTROL-MIB::cefcFRUPowerOperStatus Operational FRU power state.</p> SNMP agent cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 60</p><p>LLD</p>    
Serial Number of $2 “$1” <p>ENTITY-MIB::entPhysicalSerialNum The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).</p> SNMP agent entPhysicalSerialNum[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 3600</p><p>LLD</p>    
$2 on Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
$2 on Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
Load Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Load].last()}=3</p><p>Recovery expression: </p> high    
Load Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Load].last()}=2</p><p>Recovery expression: </p> average    
Module “{#SNMPVALUE}” is disabled <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entStateOper[”{#SNMPVALUE}”,”Module”].last()}=2</p><p>Recovery expression: </p> warning    
Temperature Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}].last()}=3</p><p>Recovery expression: </p> high    
Temperature Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}].last()}=2</p><p>Recovery expression: </p> average    
Voltage Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}].last()}=3</p><p>Recovery expression: </p> high    
FAN Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}].last()}=3</p><p>Recovery expression: </p> high    
FAN Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}].last()}=2</p><p>Recovery expression: </p> average    
Amperage Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Amperage].last()}=3</p><p>Recovery expression: </p> high    
Amperage Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Amperage].last()}=2</p><p>Recovery expression: </p> average    
Connector rating exceeded on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=11</p><p>Recovery expression: </p> average    
Cooling capacity is insufficient on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=10</p><p>Recovery expression: </p> high    
FAN failed on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=9</p><p>Recovery expression: </p> warning    
FAN problem on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=7</p><p>Recovery expression: </p> average    
Power problem on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=5</p><p>Recovery expression: </p> average    
Power Supply “{#SNMPVALUE}” is failed <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=8 and {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=12</p><p>Recovery expression: </p> high    
Power Supply “{#SNMPVALUE}” is powered off <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=1</p><p>Recovery expression: </p> warning    
System power is insufficient on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=4</p><p>Recovery expression: </p> high    
Temperature problem on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=6</p><p>Recovery expression: </p> high    
Status of Fan Tray “{#SNMPVALUE}” is in partial failure <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”].last()}=4</p><p>Recovery expression: </p> warning    
Status of Fan Tray “{#SNMPVALUE}” is powered down <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”].last()}=3</p><p>Recovery expression: </p> high    
High CPU #{#SNMPINDEX} Usage <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cpmCPUTotal5minRev[{#SNMPINDEX}].last()}>95</p><p>Recovery expression: </p> high    
High utilization of Memory Pool “{#SNMPVALUE}” <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:ciscoMemoryPoolUtilization5Min[”{#SNMPVALUE}”].last()}>95 and {Template_Cisco_ASR_9K:ciscoMemoryPoolName[”{#SNMPVALUE}”].str(image)}=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average  
High utilization of Memory Pool “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:ciscoMemoryPoolUtilization5Min[”{#SNMPVALUE}”].last()}>95 and {Template_Cisco_ASR_9K:ciscoMemoryPoolName[”{#SNMPVALUE}”].str(image)}=0</p><p>Recovery expression: </p> average    
High CPU #{#SNMPINDEX} Usage (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cpmCPUTotal5minRev[{#SNMPINDEX}].last()}>95</p><p>Recovery expression: </p> high    
Amperage Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Amperage].last()}=3</p><p>Recovery expression: </p> high    
Amperage Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Amperage].last()}=2</p><p>Recovery expression: </p> average    
FAN Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}].last()}=3</p><p>Recovery expression: </p> high    
FAN Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}].last()}=2</p><p>Recovery expression: </p> average    
Status of Fan Tray “{#SNMPVALUE}” is in partial failure (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”].last()}=4</p><p>Recovery expression: </p> warning    
Status of Fan Tray “{#SNMPVALUE}” is powered down (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”].last()}=3</p><p>Recovery expression: </p> high    
Load Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Load].last()}=3</p><p>Recovery expression: </p> high    
Load Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Load].last()}=2</p><p>Recovery expression: </p> average    
Module “{#SNMPVALUE}” is disabled (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entStateOper[”{#SNMPVALUE}”,”Module”].last()}=2</p><p>Recovery expression: </p> warning    
Connector rating exceeded on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=11</p><p>Recovery expression: </p> average    
Cooling capacity is insufficient on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=10</p><p>Recovery expression: </p> high    
FAN failed on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=9</p><p>Recovery expression: </p> warning    
FAN problem on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=7</p><p>Recovery expression: </p> average    
Power problem on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=5</p><p>Recovery expression: </p> average    
Power Supply “{#SNMPVALUE}” is failed (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=8 and {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=12</p><p>Recovery expression: </p> high    
Power Supply “{#SNMPVALUE}” is powered off (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=1</p><p>Recovery expression: </p> warning    
System power is insufficient on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=4</p><p>Recovery expression: </p> high    
Temperature problem on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”].last()}=6</p><p>Recovery expression: </p> high    
Temperature Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}].last()}=3</p><p>Recovery expression: </p> high    
Temperature Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}].last()}=2</p><p>Recovery expression: </p> average    
Voltage Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:entSensorStatus[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}].last()}=3</p><p>Recovery expression: </p> high    
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: {Template_Cisco_ASR_9K:snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”].nodata(10m)}=0</p><p>Recovery expression: </p> average    

Template_Cisco_Traps

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info  
BGP Peer State <p>BGP4-MIB::bgpPeerState CISCO-BGP4-MIB::cbgpPeer2State The BGP peer connection state.</p> SNMP trap snmptrap[“bgpPeerState cbgpPeer2State”]<p>Update: 0</p>
LSA has been originated <p>OSPF-TRAP-MIB::ospfOriginateLsa</p> SNMP trap snmptrap[“ospfOriginateLsa”]<p>Update: 0</p>  
Source of Command <p>-</p> SNMP trap snmptrap[“ccmHistoryEventCommandSource”]<p>Update: 0</p>  
OSPF Interface State <p>OSPF-MIB::ospfIfState The OSPF Interface State.</p> SNMP trap snmptrap[“ospfIfState”]<p>Update: 0</p>  
OSPF neighbour state <p>1 : down 2 : attempt 3 : init 4 : twoWay 5 : exchangeStart 6 : exchange 7 : loading 8 : full</p> SNMP trap snmptrap[“ospfNbrStateChange.*ospfNbrState[[:space:]]”]<p>Update: 0</p>  
SSH Sessions <p>CISCO-SECURE-SHELL-MIB::cssSessionHostAddr</p> SNMP trap snmptrap[“cssSessionHostAddr”]<p>Update: 0</p>  
Type of remote session <p>-</p> SNMP trap snmptrap[“tslineSesType”]<p>Update: 0</p>  
LSA aged to MaxAge <p>-</p> SNMP trap snmptrap[“ospfMaxAgeLsa”]<p>Update: 0</p>  
Status of Attack Filter <p>-</p> SNMP trap snmptrap[“cscaFilterStatus”]<p>Update: 0</p>  
BFD Sessions <p>CISCO-IETF-BFD-MIB::ciscoBfdSessDown and ciscoBfdSessUp</p> SNMP trap snmptrap[“ciscoBfdSess(Up Down)”]<p>Update: 0</p>
MPLS L3 State <p>MPLS-L3VPN-STD-MIB::mplsL3VpnVrfUp MPLS-L3VPN-STD-MIB::mplsL3VpnVrfDown</p> SNMP trap snmptrap[“mplsL3VpnVrf[Up Down]”]<p>Update: 0</p>
Attack Filter changes <p>The system generates this notification to indicate that the cscaFilterStatus of the attack filter for cscaType has changed due to the reason determined by cscaDescription. The system limits the generation of this notifications for the same cscaType to a five-second interval.</p> SNMP trap snmptrap[“cscaFilterChange”]<p>Update: 0</p>  
OSP TX Retransmits <p>-</p> SNMP trap snmptrap[“ospfTxRetransmit”]<p>Update: 0</p>  

Triggers

There are no triggers in this template.

Template Cisco General

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    

Template_Cisco_Traps

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info  
Type of remote session <p>-</p> SNMP trap snmptrap[“tslineSesType”]<p>Update: 0</p>  
LSA has been originated <p>OSPF-TRAP-MIB::ospfOriginateLsa</p> SNMP trap snmptrap[“ospfOriginateLsa”]<p>Update: 0</p>  
Attack Filter changes <p>The system generates this notification to indicate that the cscaFilterStatus of the attack filter for cscaType has changed due to the reason determined by cscaDescription. The system limits the generation of this notifications for the same cscaType to a five-second interval.</p> SNMP trap snmptrap[“cscaFilterChange”]<p>Update: 0</p>  
Status of Attack Filter <p>-</p> SNMP trap snmptrap[“cscaFilterStatus”]<p>Update: 0</p>  
SSH Sessions <p>CISCO-SECURE-SHELL-MIB::cssSessionHostAddr</p> SNMP trap snmptrap[“cssSessionHostAddr”]<p>Update: 0</p>  
Source of Command <p>-</p> SNMP trap snmptrap[“ccmHistoryEventCommandSource”]<p>Update: 0</p>  
OSPF Interface State <p>OSPF-MIB::ospfIfState The OSPF Interface State.</p> SNMP trap snmptrap[“ospfIfState”]<p>Update: 0</p>  
BGP Peer State <p>BGP4-MIB::bgpPeerState CISCO-BGP4-MIB::cbgpPeer2State The BGP peer connection state.</p> SNMP trap snmptrap[“bgpPeerState cbgpPeer2State”]<p>Update: 0</p>
MPLS L3 State <p>MPLS-L3VPN-STD-MIB::mplsL3VpnVrfUp MPLS-L3VPN-STD-MIB::mplsL3VpnVrfDown</p> SNMP trap snmptrap[“mplsL3VpnVrf[Up Down]”]<p>Update: 0</p>
LSA aged to MaxAge <p>-</p> SNMP trap snmptrap[“ospfMaxAgeLsa”]<p>Update: 0</p>  
OSP TX Retransmits <p>-</p> SNMP trap snmptrap[“ospfTxRetransmit”]<p>Update: 0</p>  
OSPF neighbour state <p>1 : down 2 : attempt 3 : init 4 : twoWay 5 : exchangeStart 6 : exchange 7 : loading 8 : full</p> SNMP trap snmptrap[“ospfNbrStateChange.*ospfNbrState[[:space:]]”]<p>Update: 0</p>  
BFD Sessions <p>CISCO-IETF-BFD-MIB::ciscoBfdSessDown and ciscoBfdSessUp</p> SNMP trap snmptrap[“ciscoBfdSess(Up Down)”]<p>Update: 0</p>

Triggers

There are no triggers in this template.

Cisco_ASR_9K

Macros used

There are no macros links in this template.

Name
Template Cisco General
Template_Cisco_Traps

Discovery rules

Name Description Type Key and additional info
Flash Devices <p>CISCO-FLASH-MIB::ciscoFlashDeviceDescr Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: System flash - for the primary Flash used to store full system images. Boot flash - for the secondary Flash used to store bootstrap images. The device description will always be available for a removable device, even when the device has been removed.</p> SNMP agent ciscoFlashDeviceDescr<p>Update: 300</p>
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Amperage]<p>Update: 300</p>
CPU <p>CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero.</p> SNMP agent cpmCPUTotalPhysicalIndex<p>Update: 300</p>
Memory Pool <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[FAN]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Voltage]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Module]<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[“Fan Tray”]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Temperature]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Load]<p>Update: 300</p>
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[“Power Supply”]<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
Size of Flash Device “$1” <p>CISCO-FLASH-MIB::ciscoFlashDeviceSizeExtended Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. This object is a 64-bit version of ciscoFlashDeviceSize.</p> SNMP agent ciscoFlashDeviceSizeExtended[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
$2 of Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Amperage]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Amperage]<p>Update: 60</p><p>LLD</p>    
CPU #$1 Usage 1min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal1minRev The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal1minRev[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
CPU #$1 Usage 5min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5minRev The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal5minRev[{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
CPU #$1 Usage 5sec Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5secRev The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonIntervalValue.</p> SNMP agent cpmCPUTotal5secRev[{#SNMPINDEX}]<p>Update: 30</p><p>LLD</p>    
Free memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree Indicates the number of bytes from the memory pool that are currently unused on the managed device.</p> SNMP agent ciscoMemoryPoolFree[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
Name of Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Used memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.</p> SNMP agent ciscoMemoryPoolUsed[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p>    
Utilization on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUtilization5Min This is the memory pool utilization for 5 minutes.</p> SNMP agent ciscoMemoryPoolUtilization5Min[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p>    
Speed of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
Status of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
$2 on Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
Manufacturer of $2 “$1” <p>ENTITY-MIB::entPhysicalMfgName The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).</p> SNMP agent entPhysicalMfgName[”{#SNMPVALUE}”,”Module”]<p>Update: 86400</p><p>LLD</p>    
Model Name of $2 “$1” <p>ENTITY-MIB::entPhysicalModelName The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.</p> SNMP agent entPhysicalModelName[”{#SNMPVALUE}”,”Module”]<p>Update: 86400</p><p>LLD</p>    
Operational Status of $2 “$1” <p>ENTITY-STATE-MIB::entStateOper The operational state for this entity.</p> SNMP agent entStateOper[”{#SNMPVALUE}”,”Module”]<p>Update: 60</p><p>LLD</p>    
Serial Number of $2 “$1” <p>ENTITY-MIB::entPhysicalSerialNum The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).</p> SNMP agent entPhysicalSerialNum[”{#SNMPVALUE}”,”Module”]<p>Update: 3600</p><p>LLD</p>    
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    
Manufacturer of $2 “$1” <p>ENTITY-MIB::entPhysicalMfgName The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).</p> SNMP agent entPhysicalMfgName[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 86400</p><p>LLD</p>    
Model Name of $2 “$1” <p>ENTITY-MIB::entPhysicalModelName The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.</p> SNMP agent entPhysicalModelName[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 86400</p><p>LLD</p>    
Operational Status of $2 “$1” <p>CISCO-ENTITY-FRU-CONTROL-MIB::cefcFanTrayOperStatus The operational state of the fan or fan tray.</p> SNMP agent cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 60</p><p>LLD</p>    
Serial Number of $2 “$1” <p>ENTITY-MIB::entPhysicalSerialNum The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).</p> SNMP agent entPhysicalSerialNum[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 3600</p><p>LLD</p>    
$2 on Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Load]<p>Update: 60</p><p>LLD</p>    
Value of $2 Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Load]<p>Update: 60</p><p>LLD</p>    
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
Current Supplied by $2 “$1” <p>CISCO-ENTITY-FRU-CONTROL-MIB::cefcFRUCurrent Current supplied by the FRU (positive values) or current required to operate the FRU (negative values).</p> SNMP agent cefcFRUCurrent[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 600</p><p>LLD</p>    
Manufacturer of $2 “$1” <p>ENTITY-MIB::entPhysicalMfgName The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).</p> SNMP agent entPhysicalMfgName[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 86400</p><p>LLD</p>    
Model Name of $2 “$1” <p>ENTITY-MIB::entPhysicalModelName The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.</p> SNMP agent entPhysicalModelName[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 86400</p><p>LLD</p>    
Operational Status of $2 “$1” <p>CISCO-ENTITY-FRU-CONTROL-MIB::cefcFRUPowerOperStatus Operational FRU power state.</p> SNMP agent cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 60</p><p>LLD</p>    
Serial Number of $2 “$1” <p>ENTITY-MIB::entPhysicalSerialNum The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).</p> SNMP agent entPhysicalSerialNum[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 3600</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
Load Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Load])=3</p><p>Recovery expression: </p> high    
Load Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Load])=2</p><p>Recovery expression: </p> average    
Module “{#SNMPVALUE}” is disabled <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entStateOper[”{#SNMPVALUE}”,”Module”])=2</p><p>Recovery expression: </p> warning    
Temperature Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
Temperature Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}])=2</p><p>Recovery expression: </p> average    
Voltage Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
FAN Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
FAN Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}])=2</p><p>Recovery expression: </p> average    
Amperage Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Amperage])=3</p><p>Recovery expression: </p> high    
Amperage Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Amperage])=2</p><p>Recovery expression: </p> average    
Connector rating exceeded on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=11</p><p>Recovery expression: </p> average    
Cooling capacity is insufficient on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=10</p><p>Recovery expression: </p> high    
FAN failed on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=9</p><p>Recovery expression: </p> warning    
FAN problem on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=7</p><p>Recovery expression: </p> average    
Power problem on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=5</p><p>Recovery expression: </p> average    
Power Supply “{#SNMPVALUE}” is failed <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=8 and last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=12</p><p>Recovery expression: </p> high    
Power Supply “{#SNMPVALUE}” is powered off <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=1</p><p>Recovery expression: </p> warning    
System power is insufficient on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=4</p><p>Recovery expression: </p> high    
Temperature problem on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=6</p><p>Recovery expression: </p> high    
Status of Fan Tray “{#SNMPVALUE}” is in partial failure <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”])=4</p><p>Recovery expression: </p> warning    
Status of Fan Tray “{#SNMPVALUE}” is powered down <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”])=3</p><p>Recovery expression: </p> high    
High CPU #{#SNMPINDEX} Usage <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cpmCPUTotal5minRev[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high    
High utilization of Memory Pool “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/ciscoMemoryPoolUtilization5Min[”{#SNMPVALUE}”])>95 and find(/Cisco_ASR_9K/ciscoMemoryPoolName[”{#SNMPVALUE}”],,”like”,”image”)=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
Amperage Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Amperage])=3</p><p>Recovery expression: </p> high    
Amperage Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Amperage])=2</p><p>Recovery expression: </p> average    
High CPU #{#SNMPINDEX} Usage (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cpmCPUTotal5minRev[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high    
High utilization of Memory Pool “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/ciscoMemoryPoolUtilization5Min[”{#SNMPVALUE}”])>95 and find(/Cisco_ASR_9K/ciscoMemoryPoolName[”{#SNMPVALUE}”],,”like”,”image”)=0</p><p>Recovery expression: </p> average    
FAN Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
FAN Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}])=2</p><p>Recovery expression: </p> average    
Voltage Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
Module “{#SNMPVALUE}” is disabled (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entStateOper[”{#SNMPVALUE}”,”Module”])=2</p><p>Recovery expression: </p> warning    
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
Status of Fan Tray “{#SNMPVALUE}” is in partial failure (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”])=4</p><p>Recovery expression: </p> warning    
Status of Fan Tray “{#SNMPVALUE}” is powered down (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”])=3</p><p>Recovery expression: </p> high    
Temperature Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
Temperature Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}])=2</p><p>Recovery expression: </p> average    
Load Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Load])=3</p><p>Recovery expression: </p> high    
Load Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Load])=2</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
Connector rating exceeded on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=11</p><p>Recovery expression: </p> average    
Cooling capacity is insufficient on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=10</p><p>Recovery expression: </p> high    
FAN failed on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=9</p><p>Recovery expression: </p> warning    
FAN problem on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=7</p><p>Recovery expression: </p> average    
Power problem on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=5</p><p>Recovery expression: </p> average    
Power Supply “{#SNMPVALUE}” is failed (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=8 and last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=12</p><p>Recovery expression: </p> high    
Power Supply “{#SNMPVALUE}” is powered off (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=1</p><p>Recovery expression: </p> warning    
System power is insufficient on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=4</p><p>Recovery expression: </p> high    
Temperature problem on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=6</p><p>Recovery expression: </p> high    

Template Cisco General

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    

Template_Cisco_Traps

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info  
Type of remote session <p>-</p> SNMP trap snmptrap[“tslineSesType”]<p>Update: 0</p>  
LSA has been originated <p>OSPF-TRAP-MIB::ospfOriginateLsa</p> SNMP trap snmptrap[“ospfOriginateLsa”]<p>Update: 0</p>  
Attack Filter changes <p>The system generates this notification to indicate that the cscaFilterStatus of the attack filter for cscaType has changed due to the reason determined by cscaDescription. The system limits the generation of this notifications for the same cscaType to a five-second interval.</p> SNMP trap snmptrap[“cscaFilterChange”]<p>Update: 0</p>  
Status of Attack Filter <p>-</p> SNMP trap snmptrap[“cscaFilterStatus”]<p>Update: 0</p>  
SSH Sessions <p>CISCO-SECURE-SHELL-MIB::cssSessionHostAddr</p> SNMP trap snmptrap[“cssSessionHostAddr”]<p>Update: 0</p>  
Source of Command <p>-</p> SNMP trap snmptrap[“ccmHistoryEventCommandSource”]<p>Update: 0</p>  
OSPF Interface State <p>OSPF-MIB::ospfIfState The OSPF Interface State.</p> SNMP trap snmptrap[“ospfIfState”]<p>Update: 0</p>  
BGP Peer State <p>BGP4-MIB::bgpPeerState CISCO-BGP4-MIB::cbgpPeer2State The BGP peer connection state.</p> SNMP trap snmptrap[“bgpPeerState cbgpPeer2State”]<p>Update: 0</p>
MPLS L3 State <p>MPLS-L3VPN-STD-MIB::mplsL3VpnVrfUp MPLS-L3VPN-STD-MIB::mplsL3VpnVrfDown</p> SNMP trap snmptrap[“mplsL3VpnVrf[Up Down]”]<p>Update: 0</p>
LSA aged to MaxAge <p>-</p> SNMP trap snmptrap[“ospfMaxAgeLsa”]<p>Update: 0</p>  
OSP TX Retransmits <p>-</p> SNMP trap snmptrap[“ospfTxRetransmit”]<p>Update: 0</p>  
OSPF neighbour state <p>1 : down 2 : attempt 3 : init 4 : twoWay 5 : exchangeStart 6 : exchange 7 : loading 8 : full</p> SNMP trap snmptrap[“ospfNbrStateChange.*ospfNbrState[[:space:]]”]<p>Update: 0</p>  
BFD Sessions <p>CISCO-IETF-BFD-MIB::ciscoBfdSessDown and ciscoBfdSessUp</p> SNMP trap snmptrap[“ciscoBfdSess(Up Down)”]<p>Update: 0</p>

Triggers

There are no triggers in this template.

Cisco_ASR_9K

Macros used

There are no macros links in this template.

Name
Template Cisco General
Template_Cisco_Traps

Discovery rules

Name Description Type Key and additional info
Flash Devices <p>CISCO-FLASH-MIB::ciscoFlashDeviceDescr Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: System flash - for the primary Flash used to store full system images. Boot flash - for the secondary Flash used to store bootstrap images. The device description will always be available for a removable device, even when the device has been removed.</p> SNMP agent ciscoFlashDeviceDescr<p>Update: 300</p>
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Amperage]<p>Update: 300</p>
CPU <p>CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero.</p> SNMP agent cpmCPUTotalPhysicalIndex<p>Update: 300</p>
Memory Pool <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[FAN]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Voltage]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Module]<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[“Fan Tray”]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Temperature]<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[Load]<p>Update: 300</p>
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
$1 Sensors <p>The textual name of the physical entity.</p> SNMP agent entPhysicalName[“Power Supply”]<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
Size of Flash Device “$1” <p>CISCO-FLASH-MIB::ciscoFlashDeviceSizeExtended Total size of the Flash device. For a removable device, the size will be zero if the device has been removed. This object is a 64-bit version of ciscoFlashDeviceSize.</p> SNMP agent ciscoFlashDeviceSizeExtended[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
$2 of Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Amperage]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Amperage]<p>Update: 60</p><p>LLD</p>    
CPU #$1 Usage 1min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal1minRev The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal1minRev[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
CPU #$1 Usage 5min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5minRev The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal5minRev[{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
CPU #$1 Usage 5sec Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5secRev The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonIntervalValue.</p> SNMP agent cpmCPUTotal5secRev[{#SNMPINDEX}]<p>Update: 30</p><p>LLD</p>    
Free memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree Indicates the number of bytes from the memory pool that are currently unused on the managed device.</p> SNMP agent ciscoMemoryPoolFree[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
Name of Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Used memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.</p> SNMP agent ciscoMemoryPoolUsed[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p>    
Utilization on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUtilization5Min This is the memory pool utilization for 5 minutes.</p> SNMP agent ciscoMemoryPoolUtilization5Min[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p>    
Speed of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
Status of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
$2 on Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
Manufacturer of $2 “$1” <p>ENTITY-MIB::entPhysicalMfgName The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).</p> SNMP agent entPhysicalMfgName[”{#SNMPVALUE}”,”Module”]<p>Update: 86400</p><p>LLD</p>    
Model Name of $2 “$1” <p>ENTITY-MIB::entPhysicalModelName The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.</p> SNMP agent entPhysicalModelName[”{#SNMPVALUE}”,”Module”]<p>Update: 86400</p><p>LLD</p>    
Operational Status of $2 “$1” <p>ENTITY-STATE-MIB::entStateOper The operational state for this entity.</p> SNMP agent entStateOper[”{#SNMPVALUE}”,”Module”]<p>Update: 60</p><p>LLD</p>    
Serial Number of $2 “$1” <p>ENTITY-MIB::entPhysicalSerialNum The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).</p> SNMP agent entPhysicalSerialNum[”{#SNMPVALUE}”,”Module”]<p>Update: 3600</p><p>LLD</p>    
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    
Manufacturer of $2 “$1” <p>ENTITY-MIB::entPhysicalMfgName The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).</p> SNMP agent entPhysicalMfgName[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 86400</p><p>LLD</p>    
Model Name of $2 “$1” <p>ENTITY-MIB::entPhysicalModelName The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.</p> SNMP agent entPhysicalModelName[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 86400</p><p>LLD</p>    
Operational Status of $2 “$1” <p>CISCO-ENTITY-FRU-CONTROL-MIB::cefcFanTrayOperStatus The operational state of the fan or fan tray.</p> SNMP agent cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 60</p><p>LLD</p>    
Serial Number of $2 “$1” <p>ENTITY-MIB::entPhysicalSerialNum The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).</p> SNMP agent entPhysicalSerialNum[”{#SNMPVALUE}”,”Fan Tray”]<p>Update: 3600</p><p>LLD</p>    
$2 on Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1”/$3 <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
Status of $2 Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorStatus This variable indicates the present operational status of the sensor.</p> SNMP agent entSensorStatus[”{#SNMPVALUE}”,Load]<p>Update: 60</p><p>LLD</p>    
Value of $2 Sensor “$1” <p>CISCO-ENTITY-SENSOR-MIB::entSensorValue This variable reports the most recent measurement seen by the sensor.</p> SNMP agent entSensorValue[”{#SNMPVALUE}”,Load]<p>Update: 60</p><p>LLD</p>    
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
Current Supplied by $2 “$1” <p>CISCO-ENTITY-FRU-CONTROL-MIB::cefcFRUCurrent Current supplied by the FRU (positive values) or current required to operate the FRU (negative values).</p> SNMP agent cefcFRUCurrent[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 600</p><p>LLD</p>    
Manufacturer of $2 “$1” <p>ENTITY-MIB::entPhysicalMfgName The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present).</p> SNMP agent entPhysicalMfgName[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 86400</p><p>LLD</p>    
Model Name of $2 “$1” <p>ENTITY-MIB::entPhysicalModelName The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself.</p> SNMP agent entPhysicalModelName[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 86400</p><p>LLD</p>    
Operational Status of $2 “$1” <p>CISCO-ENTITY-FRU-CONTROL-MIB::cefcFRUPowerOperStatus Operational FRU power state.</p> SNMP agent cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 60</p><p>LLD</p>    
Serial Number of $2 “$1” <p>ENTITY-MIB::entPhysicalSerialNum The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present).</p> SNMP agent entPhysicalSerialNum[”{#SNMPVALUE}”,”Power Supply”]<p>Update: 3600</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
Load Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Load])=3</p><p>Recovery expression: </p> high    
Load Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Load])=2</p><p>Recovery expression: </p> average    
Module “{#SNMPVALUE}” is disabled <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entStateOper[”{#SNMPVALUE}”,”Module”])=2</p><p>Recovery expression: </p> warning    
Temperature Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
Temperature Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}])=2</p><p>Recovery expression: </p> average    
Voltage Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
FAN Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
FAN Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}])=2</p><p>Recovery expression: </p> average    
Amperage Sensor “{#SNMPVALUE}” is nonoperational <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Amperage])=3</p><p>Recovery expression: </p> high    
Amperage Sensor “{#SNMPVALUE}” is unavailable <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Amperage])=2</p><p>Recovery expression: </p> average    
Connector rating exceeded on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=11</p><p>Recovery expression: </p> average    
Cooling capacity is insufficient on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=10</p><p>Recovery expression: </p> high    
FAN failed on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=9</p><p>Recovery expression: </p> warning    
FAN problem on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=7</p><p>Recovery expression: </p> average    
Power problem on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=5</p><p>Recovery expression: </p> average    
Power Supply “{#SNMPVALUE}” is failed <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=8 and last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=12</p><p>Recovery expression: </p> high    
Power Supply “{#SNMPVALUE}” is powered off <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=1</p><p>Recovery expression: </p> warning    
System power is insufficient on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=4</p><p>Recovery expression: </p> high    
Temperature problem on Power Supply “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=6</p><p>Recovery expression: </p> high    
Status of Fan Tray “{#SNMPVALUE}” is in partial failure <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”])=4</p><p>Recovery expression: </p> warning    
Status of Fan Tray “{#SNMPVALUE}” is powered down <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”])=3</p><p>Recovery expression: </p> high    
High CPU #{#SNMPINDEX} Usage <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cpmCPUTotal5minRev[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high    
High utilization of Memory Pool “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_ASR_9K/ciscoMemoryPoolUtilization5Min[”{#SNMPVALUE}”])>95 and find(/Cisco_ASR_9K/ciscoMemoryPoolName[”{#SNMPVALUE}”],,”like”,”image”)=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
Amperage Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Amperage])=3</p><p>Recovery expression: </p> high    
Amperage Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Amperage])=2</p><p>Recovery expression: </p> average    
High CPU #{#SNMPINDEX} Usage (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cpmCPUTotal5minRev[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high    
High utilization of Memory Pool “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/ciscoMemoryPoolUtilization5Min[”{#SNMPVALUE}”])>95 and find(/Cisco_ASR_9K/ciscoMemoryPoolName[”{#SNMPVALUE}”],,”like”,”image”)=0</p><p>Recovery expression: </p> average    
FAN Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
FAN Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,FAN,{#SNMPINDEX}])=2</p><p>Recovery expression: </p> average    
Voltage Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Voltage,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
Module “{#SNMPVALUE}” is disabled (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entStateOper[”{#SNMPVALUE}”,”Module”])=2</p><p>Recovery expression: </p> warning    
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
Status of Fan Tray “{#SNMPVALUE}” is in partial failure (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”])=4</p><p>Recovery expression: </p> warning    
Status of Fan Tray “{#SNMPVALUE}” is powered down (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFanTrayOperStatus[”{#SNMPVALUE}”,”Fan Tray”])=3</p><p>Recovery expression: </p> high    
Temperature Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}])=3</p><p>Recovery expression: </p> high    
Temperature Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Temperature,{#SNMPINDEX}])=2</p><p>Recovery expression: </p> average    
Load Sensor “{#SNMPVALUE}” is nonoperational (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Load])=3</p><p>Recovery expression: </p> high    
Load Sensor “{#SNMPVALUE}” is unavailable (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/entSensorStatus[”{#SNMPVALUE}”,Load])=2</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_ASR_9K/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
Connector rating exceeded on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=11</p><p>Recovery expression: </p> average    
Cooling capacity is insufficient on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=10</p><p>Recovery expression: </p> high    
FAN failed on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=9</p><p>Recovery expression: </p> warning    
FAN problem on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=7</p><p>Recovery expression: </p> average    
Power problem on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=5</p><p>Recovery expression: </p> average    
Power Supply “{#SNMPVALUE}” is failed (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=8 and last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=12</p><p>Recovery expression: </p> high    
Power Supply “{#SNMPVALUE}” is powered off (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=1</p><p>Recovery expression: </p> warning    
System power is insufficient on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=4</p><p>Recovery expression: </p> high    
Temperature problem on Power Supply “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_ASR_9K/cefcFRUPowerOperStatus[”{#SNMPVALUE}”,”Power Supply”])=6</p><p>Recovery expression: </p> high