Available versions




Template Cisco General

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: {Template Cisco General:snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”].nodata(10m)}=0</p><p>Recovery expression: </p> average    

Template_Cisco_3500

Macros used

There are no macros links in this template.

Name
Template Cisco General
Template_Cisco_Traps

Discovery rules

Name Description Type Key and additional info
Power Supplies <p>CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusDescr Textual description of the power supply being instrumented.</p> SNMP agent ciscoEnvMonSupplyStatusDescr<p>Update: 300</p>
Flash Devices <p>CISCO-FLASH-MIB::ciscoFlashDeviceDescr Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: System flash - for the primary Flash used to store full system images. Boot flash - for the secondary Flash used to store bootstrap images. The device description will always be available for a removable device, even when the device has been removed.</p> SNMP agent ciscoFlashDeviceDescr<p>Update: 300</p>
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
Memory Pool <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName<p>Update: 300</p>
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
CPU <p>CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero.</p> SNMP agent cpmCPUTotalPhysicalIndex<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>
Temperature <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusDescr Textual description of the testpoint being instrumented.</p> SNMP agent ciscoEnvMonTemperatureStatusDescr<p>Update: 300</p>
FAN <p>CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr Textual description of the fan being instrumented.</p> SNMP agent ciscoEnvMonFanStatusDescr<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
Status of Power Supply “$1” <p>CISCO-ENVMON-MIB::ciscoEnvMonSupplyState The current state of the power supply being instrumented.</p> SNMP agent ciscoEnvMonSupplyState[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
Size of Flash Device “$1” <p>CISCO-FLASH-MIB::ciscoFlashDeviceSize Total size of the Flash device. For a removable device, the size will be zero if the device has been removed.</p> SNMP agent ciscoFlashDeviceSize[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
Free memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree Indicates the number of bytes from the memory pool that are currently unused on the managed device.</p> SNMP agent ciscoMemoryPoolFree[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
Name of Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Total Memory Pool “$1” <p>-</p> Calculated ciscoMemoryPoolTotal[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Used memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.</p> SNMP agent ciscoMemoryPoolUsed[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p>    
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
CPU #$1 Usage 1min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal1minRev The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal1minRev[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
CPU #$1 Usage 5min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5minRev The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal5minRev[{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
CPU #$1 Usage 5sec Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5secRev The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonIntervalValue.</p> SNMP agent cpmCPUTotal5secRev[{#SNMPINDEX}]<p>Update: 30</p><p>LLD</p>    
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    
Status of Temperature “{#SNMPVALUE}” <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureState The current state of the testpoint being instrumented.</p> SNMP agent ciscoEnvMonTemperatureState[”{#SNMPVALUE}”]<p>Update: 30</p><p>LLD</p>    
Threshold of Temperature “{#SNMPVALUE}” <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureThreshold The highest value that the associated instance of the object ciscoEnvMonTemperatureStatusValue may obtain before an emergency shutdown of the managed device is initiated.</p> SNMP agent ciscoEnvMonTemperatureThreshold[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Value of Temperature “{#SNMPVALUE}” <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusValue The current measurement of the testpoint being instrumented.</p> SNMP agent ciscoEnvMonTemperatureStatusValue[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
Status of FAN “$1” <p>CISCO-ENVMON-MIB::ciscoEnvMonFanState The current state of the fan being instrumented.</p> SNMP agent ciscoEnvMonFanState[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
High CPU #{#SNMPINDEX} Usage <p>-</p> <p>Expression: {Template_Cisco_3500:cpmCPUTotal5minRev[{#SNMPINDEX}].last()}>95</p><p>Recovery expression: </p> high    
Status of FAN “{#SNMPVALUE}” is critical <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonFanState[”{#SNMPVALUE}”].last()}=3</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is non-operable <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonFanState[”{#SNMPVALUE}”].last()}=2</p><p>Recovery expression: </p> warning    
Status of FAN “{#SNMPVALUE}” is not functioning <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonFanState[”{#SNMPVALUE}”].last()}=6</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is shutdown <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonFanState[”{#SNMPVALUE}”].last()}=4</p><p>Recovery expression: </p> high    
High utilization of Memory Pool “{#SNMPVALUE}” <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoMemoryPoolUsed[”{#SNMPVALUE}”].last()}>{Template_Cisco_3500:ciscoMemoryPoolTotal[”{#SNMPVALUE}”].last()}*0.9</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is critical <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonSupplyState[”{#SNMPVALUE}”].last()}=3</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is non-operable <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonSupplyState[”{#SNMPVALUE}”].last()}=2</p><p>Recovery expression: </p> warning    
Status of Power Supply “{#SNMPVALUE}” is not functioning <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonSupplyState[”{#SNMPVALUE}”].last()}=6</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is shutdown <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonSupplyState[”{#SNMPVALUE}”].last()}=4</p><p>Recovery expression: </p> high    
Status of Temperature “{#SNMPVALUE}” is critical <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonTemperatureState[”{#SNMPVALUE}”].last()}=3</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is non-operable <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonTemperatureState[”{#SNMPVALUE}”].last()}=2</p><p>Recovery expression: </p> warning    
Status of Temperature “{#SNMPVALUE}” is not functioning <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonTemperatureState[”{#SNMPVALUE}”].last()}=6</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is shutdown <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonTemperatureState[”{#SNMPVALUE}”].last()}=4</p><p>Recovery expression: </p> high    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: {Template_Cisco_3500:snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: {Template_Cisco_3500:snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: {Template_Cisco_3500:snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: {Template_Cisco_3500:snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is critical (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonSupplyState[”{#SNMPVALUE}”].last()}=3</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is non-operable (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonSupplyState[”{#SNMPVALUE}”].last()}=2</p><p>Recovery expression: </p> warning    
Status of Power Supply “{#SNMPVALUE}” is not functioning (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonSupplyState[”{#SNMPVALUE}”].last()}=6</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is shutdown (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonSupplyState[”{#SNMPVALUE}”].last()}=4</p><p>Recovery expression: </p> high    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”].nodata(10m)}=0</p><p>Recovery expression: </p> average  
High utilization of Memory Pool “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoMemoryPoolUsed[”{#SNMPVALUE}”].last()}>{Template_Cisco_3500:ciscoMemoryPoolTotal[”{#SNMPVALUE}”].last()}*0.9</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
High CPU #{#SNMPINDEX} Usage (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:cpmCPUTotal5minRev[{#SNMPINDEX}].last()}>95</p><p>Recovery expression: </p> high    
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”].nodata(10m)}=0</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is critical (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonTemperatureState[”{#SNMPVALUE}”].last()}=3</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is non-operable (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonTemperatureState[”{#SNMPVALUE}”].last()}=2</p><p>Recovery expression: </p> warning    
Status of Temperature “{#SNMPVALUE}” is not functioning (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonTemperatureState[”{#SNMPVALUE}”].last()}=6</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is shutdown (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonTemperatureState[”{#SNMPVALUE}”].last()}=4</p><p>Recovery expression: </p> high    
Status of FAN “{#SNMPVALUE}” is critical (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonFanState[”{#SNMPVALUE}”].last()}=3</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is non-operable (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonFanState[”{#SNMPVALUE}”].last()}=2</p><p>Recovery expression: </p> warning    
Status of FAN “{#SNMPVALUE}” is not functioning (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonFanState[”{#SNMPVALUE}”].last()}=6</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is shutdown (LLD) <p>-</p> <p>Expression: {Template_Cisco_3500:ciscoEnvMonFanState[”{#SNMPVALUE}”].last()}=4</p><p>Recovery expression: </p> high    

Template_Cisco_Traps

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info  
BGP Peer State <p>BGP4-MIB::bgpPeerState CISCO-BGP4-MIB::cbgpPeer2State The BGP peer connection state.</p> SNMP trap snmptrap[“bgpPeerState cbgpPeer2State”]<p>Update: 0</p>
LSA has been originated <p>OSPF-TRAP-MIB::ospfOriginateLsa</p> SNMP trap snmptrap[“ospfOriginateLsa”]<p>Update: 0</p>  
Source of Command <p>-</p> SNMP trap snmptrap[“ccmHistoryEventCommandSource”]<p>Update: 0</p>  
OSPF Interface State <p>OSPF-MIB::ospfIfState The OSPF Interface State.</p> SNMP trap snmptrap[“ospfIfState”]<p>Update: 0</p>  
OSPF neighbour state <p>1 : down 2 : attempt 3 : init 4 : twoWay 5 : exchangeStart 6 : exchange 7 : loading 8 : full</p> SNMP trap snmptrap[“ospfNbrStateChange.*ospfNbrState[[:space:]]”]<p>Update: 0</p>  
SSH Sessions <p>CISCO-SECURE-SHELL-MIB::cssSessionHostAddr</p> SNMP trap snmptrap[“cssSessionHostAddr”]<p>Update: 0</p>  
Type of remote session <p>-</p> SNMP trap snmptrap[“tslineSesType”]<p>Update: 0</p>  
LSA aged to MaxAge <p>-</p> SNMP trap snmptrap[“ospfMaxAgeLsa”]<p>Update: 0</p>  
Status of Attack Filter <p>-</p> SNMP trap snmptrap[“cscaFilterStatus”]<p>Update: 0</p>  
BFD Sessions <p>CISCO-IETF-BFD-MIB::ciscoBfdSessDown and ciscoBfdSessUp</p> SNMP trap snmptrap[“ciscoBfdSess(Up Down)”]<p>Update: 0</p>
MPLS L3 State <p>MPLS-L3VPN-STD-MIB::mplsL3VpnVrfUp MPLS-L3VPN-STD-MIB::mplsL3VpnVrfDown</p> SNMP trap snmptrap[“mplsL3VpnVrf[Up Down]”]<p>Update: 0</p>
Attack Filter changes <p>The system generates this notification to indicate that the cscaFilterStatus of the attack filter for cscaType has changed due to the reason determined by cscaDescription. The system limits the generation of this notifications for the same cscaType to a five-second interval.</p> SNMP trap snmptrap[“cscaFilterChange”]<p>Update: 0</p>  
OSP TX Retransmits <p>-</p> SNMP trap snmptrap[“ospfTxRetransmit”]<p>Update: 0</p>  

Triggers

There are no triggers in this template.

Template Cisco General

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    

Cisco_3500

Macros used

There are no macros links in this template.

Name
Template Cisco General
Template_Cisco_Traps

Discovery rules

Name Description Type Key and additional info
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
Temperature <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusDescr Textual description of the testpoint being instrumented.</p> SNMP agent ciscoEnvMonTemperatureStatusDescr<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>
Flash Devices <p>CISCO-FLASH-MIB::ciscoFlashDeviceDescr Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: System flash - for the primary Flash used to store full system images. Boot flash - for the secondary Flash used to store bootstrap images. The device description will always be available for a removable device, even when the device has been removed.</p> SNMP agent ciscoFlashDeviceDescr<p>Update: 300</p>
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
Power Supplies <p>CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusDescr Textual description of the power supply being instrumented.</p> SNMP agent ciscoEnvMonSupplyStatusDescr<p>Update: 300</p>
Memory Pool <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName<p>Update: 300</p>
FAN <p>CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr Textual description of the fan being instrumented.</p> SNMP agent ciscoEnvMonFanStatusDescr<p>Update: 300</p>
CPU <p>CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero.</p> SNMP agent cpmCPUTotalPhysicalIndex<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
Status of Temperature “{#SNMPVALUE}” <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureState The current state of the testpoint being instrumented.</p> SNMP agent ciscoEnvMonTemperatureState[”{#SNMPVALUE}”]<p>Update: 30</p><p>LLD</p>    
Threshold of Temperature “{#SNMPVALUE}” <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureThreshold The highest value that the associated instance of the object ciscoEnvMonTemperatureStatusValue may obtain before an emergency shutdown of the managed device is initiated.</p> SNMP agent ciscoEnvMonTemperatureThreshold[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Value of Temperature “{#SNMPVALUE}” <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusValue The current measurement of the testpoint being instrumented.</p> SNMP agent ciscoEnvMonTemperatureStatusValue[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    
Size of Flash Device “$1” <p>CISCO-FLASH-MIB::ciscoFlashDeviceSize Total size of the Flash device. For a removable device, the size will be zero if the device has been removed.</p> SNMP agent ciscoFlashDeviceSize[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
Status of Power Supply “$1” <p>CISCO-ENVMON-MIB::ciscoEnvMonSupplyState The current state of the power supply being instrumented.</p> SNMP agent ciscoEnvMonSupplyState[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
Free memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree Indicates the number of bytes from the memory pool that are currently unused on the managed device.</p> SNMP agent ciscoMemoryPoolFree[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
Name of Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Total Memory Pool “$1” <p>-</p> Calculated ciscoMemoryPoolTotal[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Used memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.</p> SNMP agent ciscoMemoryPoolUsed[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p>    
Status of FAN “$1” <p>CISCO-ENVMON-MIB::ciscoEnvMonFanState The current state of the fan being instrumented.</p> SNMP agent ciscoEnvMonFanState[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
CPU #$1 Usage 1min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal1minRev The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal1minRev[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
CPU #$1 Usage 5min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5minRev The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal5minRev[{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
CPU #$1 Usage 5sec Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5secRev The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonIntervalValue.</p> SNMP agent cpmCPUTotal5secRev[{#SNMPINDEX}]<p>Update: 30</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
High CPU #{#SNMPINDEX} Usage <p>-</p> <p>Expression: last(/Cisco_3500/cpmCPUTotal5minRev[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high    
Status of FAN “{#SNMPVALUE}” is critical <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is non-operable <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of FAN “{#SNMPVALUE}” is not functioning <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is shutdown <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
High utilization of Memory Pool “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_3500/ciscoMemoryPoolUsed[”{#SNMPVALUE}”])>last(/Cisco_3500/ciscoMemoryPoolTotal[”{#SNMPVALUE}”])*0.9</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is critical <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is non-operable <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of Power Supply “{#SNMPVALUE}” is not functioning <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is shutdown <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
Status of Temperature “{#SNMPVALUE}” is critical <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is non-operable <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of Temperature “{#SNMPVALUE}” is not functioning <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is shutdown <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is critical (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is non-operable (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of Temperature “{#SNMPVALUE}” is not functioning (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is shutdown (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
Status of Power Supply “{#SNMPVALUE}” is critical (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is non-operable (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of Power Supply “{#SNMPVALUE}” is not functioning (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is shutdown (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
High utilization of Memory Pool “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoMemoryPoolUsed[”{#SNMPVALUE}”])>last(/Cisco_3500/ciscoMemoryPoolTotal[”{#SNMPVALUE}”])*0.9</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is critical (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is non-operable (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of FAN “{#SNMPVALUE}” is not functioning (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is shutdown (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
High CPU #{#SNMPINDEX} Usage (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/cpmCPUTotal5minRev[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high    

Template_Cisco_Traps

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info  
Type of remote session <p>-</p> SNMP trap snmptrap[“tslineSesType”]<p>Update: 0</p>  
LSA has been originated <p>OSPF-TRAP-MIB::ospfOriginateLsa</p> SNMP trap snmptrap[“ospfOriginateLsa”]<p>Update: 0</p>  
Attack Filter changes <p>The system generates this notification to indicate that the cscaFilterStatus of the attack filter for cscaType has changed due to the reason determined by cscaDescription. The system limits the generation of this notifications for the same cscaType to a five-second interval.</p> SNMP trap snmptrap[“cscaFilterChange”]<p>Update: 0</p>  
Status of Attack Filter <p>-</p> SNMP trap snmptrap[“cscaFilterStatus”]<p>Update: 0</p>  
SSH Sessions <p>CISCO-SECURE-SHELL-MIB::cssSessionHostAddr</p> SNMP trap snmptrap[“cssSessionHostAddr”]<p>Update: 0</p>  
Source of Command <p>-</p> SNMP trap snmptrap[“ccmHistoryEventCommandSource”]<p>Update: 0</p>  
OSPF Interface State <p>OSPF-MIB::ospfIfState The OSPF Interface State.</p> SNMP trap snmptrap[“ospfIfState”]<p>Update: 0</p>  
BGP Peer State <p>BGP4-MIB::bgpPeerState CISCO-BGP4-MIB::cbgpPeer2State The BGP peer connection state.</p> SNMP trap snmptrap[“bgpPeerState cbgpPeer2State”]<p>Update: 0</p>
MPLS L3 State <p>MPLS-L3VPN-STD-MIB::mplsL3VpnVrfUp MPLS-L3VPN-STD-MIB::mplsL3VpnVrfDown</p> SNMP trap snmptrap[“mplsL3VpnVrf[Up Down]”]<p>Update: 0</p>
LSA aged to MaxAge <p>-</p> SNMP trap snmptrap[“ospfMaxAgeLsa”]<p>Update: 0</p>  
OSP TX Retransmits <p>-</p> SNMP trap snmptrap[“ospfTxRetransmit”]<p>Update: 0</p>  
OSPF neighbour state <p>1 : down 2 : attempt 3 : init 4 : twoWay 5 : exchangeStart 6 : exchange 7 : loading 8 : full</p> SNMP trap snmptrap[“ospfNbrStateChange.*ospfNbrState[[:space:]]”]<p>Update: 0</p>  
BFD Sessions <p>CISCO-IETF-BFD-MIB::ciscoBfdSessDown and ciscoBfdSessUp</p> SNMP trap snmptrap[“ciscoBfdSess(Up Down)”]<p>Update: 0</p>

Triggers

There are no triggers in this template.

Template Cisco General

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: nodata(/Template Cisco General/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    

Cisco_3500

Macros used

There are no macros links in this template.

Name
Template Cisco General
Template_Cisco_Traps

Discovery rules

Name Description Type Key and additional info
OSPF Neighbors <p>OSPF-MIB::ospfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor’s interfaces.</p> SNMP agent ospfNbrIpAddr<p>Update: 300</p>
Temperature <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusDescr Textual description of the testpoint being instrumented.</p> SNMP agent ciscoEnvMonTemperatureStatusDescr<p>Update: 300</p>
OSPF Interfaces <p>OSPF-MIB::ospfIfIpAddress The IP address of this OSPF interface.</p> SNMP agent ospfIfIpAddress<p>Update: 300</p>
Flash Devices <p>CISCO-FLASH-MIB::ciscoFlashDeviceDescr Description of a Flash device. The description is meant to explain what the Flash device and its purpose is. Current values are: System flash - for the primary Flash used to store full system images. Boot flash - for the secondary Flash used to store bootstrap images. The device description will always be available for a removable device, even when the device has been removed.</p> SNMP agent ciscoFlashDeviceDescr<p>Update: 300</p>
BGP Peers <p>BGP4-MIB::bgpPeerIdentifier</p> SNMP agent bgpPeerIdentifier<p>Update: 300</p>
Power Supplies <p>CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusDescr Textual description of the power supply being instrumented.</p> SNMP agent ciscoEnvMonSupplyStatusDescr<p>Update: 300</p>
Memory Pool <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName<p>Update: 300</p>
FAN <p>CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr Textual description of the fan being instrumented.</p> SNMP agent ciscoEnvMonFanStatusDescr<p>Update: 300</p>
CPU <p>CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero.</p> SNMP agent cpmCPUTotalPhysicalIndex<p>Update: 300</p>

Items collected

Name Description Type Key and additional info    
OSPF “{#SNMPVALUE}” Neighbour State <p>-</p> SNMP trap snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”]<p>Update: 0</p><p>LLD</p>    
Status of Temperature “{#SNMPVALUE}” <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureState The current state of the testpoint being instrumented.</p> SNMP agent ciscoEnvMonTemperatureState[”{#SNMPVALUE}”]<p>Update: 30</p><p>LLD</p>    
Threshold of Temperature “{#SNMPVALUE}” <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureThreshold The highest value that the associated instance of the object ciscoEnvMonTemperatureStatusValue may obtain before an emergency shutdown of the managed device is initiated.</p> SNMP agent ciscoEnvMonTemperatureThreshold[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Value of Temperature “{#SNMPVALUE}” <p>CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusValue The current measurement of the testpoint being instrumented.</p> SNMP agent ciscoEnvMonTemperatureStatusValue[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
OSPF Interface “{SNMPVALUE}” State <p>-</p> SNMP trap snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”]<p>Update: 0</p><p>LLD</p>    
Size of Flash Device “$1” <p>CISCO-FLASH-MIB::ciscoFlashDeviceSize Total size of the Flash device. For a removable device, the size will be zero if the device has been removed.</p> SNMP agent ciscoFlashDeviceSize[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>
BGP Peer “{#SNMPINDEX}” State <p>-</p> SNMP trap snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState.{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”]<p>Update: 0</p><p>LLD</p>  
Status of Power Supply “$1” <p>CISCO-ENVMON-MIB::ciscoEnvMonSupplyState The current state of the power supply being instrumented.</p> SNMP agent ciscoEnvMonSupplyState[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
Free memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolFree Indicates the number of bytes from the memory pool that are currently unused on the managed device.</p> SNMP agent ciscoMemoryPoolFree[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
Name of Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolName A textual name assigned to the memory pool.</p> SNMP agent ciscoMemoryPoolName[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Total Memory Pool “$1” <p>-</p> Calculated ciscoMemoryPoolTotal[”{#SNMPVALUE}”]<p>Update: 3600</p><p>LLD</p>    
Used memory on Memory Pool “$1” <p>CISCO-MEMORY-POOL-MIB::ciscoMemoryPoolUsed Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.</p> SNMP agent ciscoMemoryPoolUsed[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p>    
Status of FAN “$1” <p>CISCO-ENVMON-MIB::ciscoEnvMonFanState The current state of the fan being instrumented.</p> SNMP agent ciscoEnvMonFanState[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p>    
CPU #$1 Usage 1min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal1minRev The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal1minRev[{#SNMPINDEX}]<p>Update: 60</p><p>LLD</p>    
CPU #$1 Usage 5min Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5minRev The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100).</p> SNMP agent cpmCPUTotal5minRev[{#SNMPINDEX}]<p>Update: 300</p><p>LLD</p>    
CPU #$1 Usage 5sec Rev <p>CISCO-PROCESS-MIB::cpmCPUTotal5secRev The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonIntervalValue.</p> SNMP agent cpmCPUTotal5secRev[{#SNMPINDEX}]<p>Update: 30</p><p>LLD</p>    

Triggers

Name Description Expression Priority    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
OSPF Interface “{#SNMPVALUE}” State has been changed <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
OSPF Neighbor {#SNMPVALUE} has been changed <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
High CPU #{#SNMPINDEX} Usage <p>-</p> <p>Expression: last(/Cisco_3500/cpmCPUTotal5minRev[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high    
Status of FAN “{#SNMPVALUE}” is critical <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is non-operable <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of FAN “{#SNMPVALUE}” is not functioning <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is shutdown <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
High utilization of Memory Pool “{#SNMPVALUE}” <p>-</p> <p>Expression: last(/Cisco_3500/ciscoMemoryPoolUsed[”{#SNMPVALUE}”])>last(/Cisco_3500/ciscoMemoryPoolTotal[”{#SNMPVALUE}”])*0.9</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is critical <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is non-operable <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of Power Supply “{#SNMPVALUE}” is not functioning <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is shutdown <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
Status of Temperature “{#SNMPVALUE}” is critical <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is non-operable <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of Temperature “{#SNMPVALUE}” is not functioning <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is shutdown <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
OSPF Neighbor {#SNMPVALUE} has been changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(ospfNbrStateChange).ospfNbrIpAddr[[:space:]]{#SNMPVALUE}[[:space:]].[[:space:]][a-zA-Z]+[[:space:]]$”],10m)=0</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is critical (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is non-operable (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of Temperature “{#SNMPVALUE}” is not functioning (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of Temperature “{#SNMPVALUE}” is shutdown (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonTemperatureState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
OSPF Interface “{#SNMPVALUE}” State has been changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“ospfIfStateChange.+ospfIfIpAddress[[:space:]]{#SNMPVALUE}[[:space:]].+ospfIfState[[:space:]][a-zA-Z]+”],10m)=0</p><p>Recovery expression: </p> average    
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(bgpEstablished bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average
BGP Peer “{#SNMPINDEX}”->”{#SNMPVALUE}” State changed (LLD) <p>-</p> <p>Expression: nodata(/Cisco_3500/snmptrap[“(bgpBackwardTransition cbgpFsmStateChange).*bgpPeerState .{#SNMPINDEX}[[:space:]][a-zA-Z]+[[:space:]]”],10m)=0</p><p>Recovery expression: </p> average  
Status of Power Supply “{#SNMPVALUE}” is critical (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is non-operable (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of Power Supply “{#SNMPVALUE}” is not functioning (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of Power Supply “{#SNMPVALUE}” is shutdown (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonSupplyState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
High utilization of Memory Pool “{#SNMPVALUE}” (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoMemoryPoolUsed[”{#SNMPVALUE}”])>last(/Cisco_3500/ciscoMemoryPoolTotal[”{#SNMPVALUE}”])*0.9</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is critical (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=3</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is non-operable (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> warning    
Status of FAN “{#SNMPVALUE}” is not functioning (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=6</p><p>Recovery expression: </p> average    
Status of FAN “{#SNMPVALUE}” is shutdown (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/ciscoEnvMonFanState[”{#SNMPVALUE}”])=4</p><p>Recovery expression: </p> high    
High CPU #{#SNMPINDEX} Usage (LLD) <p>-</p> <p>Expression: last(/Cisco_3500/cpmCPUTotal5minRev[{#SNMPINDEX}])>95</p><p>Recovery expression: </p> high    

Template_Cisco_Traps

Macros used

There are no macros links in this template.

There are no template links in this template.

Discovery rules

There are no discovery rules in this template.

Items collected

Name Description Type Key and additional info  
Type of remote session <p>-</p> SNMP trap snmptrap[“tslineSesType”]<p>Update: 0</p>  
LSA has been originated <p>OSPF-TRAP-MIB::ospfOriginateLsa</p> SNMP trap snmptrap[“ospfOriginateLsa”]<p>Update: 0</p>  
Attack Filter changes <p>The system generates this notification to indicate that the cscaFilterStatus of the attack filter for cscaType has changed due to the reason determined by cscaDescription. The system limits the generation of this notifications for the same cscaType to a five-second interval.</p> SNMP trap snmptrap[“cscaFilterChange”]<p>Update: 0</p>  
Status of Attack Filter <p>-</p> SNMP trap snmptrap[“cscaFilterStatus”]<p>Update: 0</p>  
SSH Sessions <p>CISCO-SECURE-SHELL-MIB::cssSessionHostAddr</p> SNMP trap snmptrap[“cssSessionHostAddr”]<p>Update: 0</p>  
Source of Command <p>-</p> SNMP trap snmptrap[“ccmHistoryEventCommandSource”]<p>Update: 0</p>  
OSPF Interface State <p>OSPF-MIB::ospfIfState The OSPF Interface State.</p> SNMP trap snmptrap[“ospfIfState”]<p>Update: 0</p>  
BGP Peer State <p>BGP4-MIB::bgpPeerState CISCO-BGP4-MIB::cbgpPeer2State The BGP peer connection state.</p> SNMP trap snmptrap[“bgpPeerState cbgpPeer2State”]<p>Update: 0</p>
MPLS L3 State <p>MPLS-L3VPN-STD-MIB::mplsL3VpnVrfUp MPLS-L3VPN-STD-MIB::mplsL3VpnVrfDown</p> SNMP trap snmptrap[“mplsL3VpnVrf[Up Down]”]<p>Update: 0</p>
LSA aged to MaxAge <p>-</p> SNMP trap snmptrap[“ospfMaxAgeLsa”]<p>Update: 0</p>  
OSP TX Retransmits <p>-</p> SNMP trap snmptrap[“ospfTxRetransmit”]<p>Update: 0</p>  
OSPF neighbour state <p>1 : down 2 : attempt 3 : init 4 : twoWay 5 : exchangeStart 6 : exchange 7 : loading 8 : full</p> SNMP trap snmptrap[“ospfNbrStateChange.*ospfNbrState[[:space:]]”]<p>Update: 0</p>  
BFD Sessions <p>CISCO-IETF-BFD-MIB::ciscoBfdSessDown and ciscoBfdSessUp</p> SNMP trap snmptrap[“ciscoBfdSess(Up Down)”]<p>Update: 0</p>

Triggers

There are no triggers in this template.