There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Power Supply Discovery | <p>A10-AX-MIB::axPowerSupplyName The pwer supply name.</p> | SNMP agent |
axPowerSupplyName<p>Update: 300</p> |
FAN Discovery | <p>A10-AX-MIB::axFanName The system fan name.</p> | SNMP agent |
axFanName<p>Update: 300</p> |
Power Supply Voltage Discovery | <p>A10-AX-MIB::axPowerSupplyVoltageDescription The description of the system power supply voltage.</p> | SNMP agent |
axPowerSupplyVoltageDescription<p>Update: 300</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
Total Disk Space | <p>A10-AX-MIB::axSysDiskTotalSpace The total space of the disk in MB.</p> | SNMP agent |
axSysDiskTotalSpace<p>Update: 3600</p> |
Speed of FAN #3 | <p>A10-AX-MIB::axSysHwFan3Speed The fan3’s speed</p> | SNMP agent |
axSysHwFan3Speed<p>Update: 300</p> |
CPU Usage (5 sec) | <p>A10-AX-MIB::axSysAverageCpuUsage The average CPU usage in last 5 seconds.</p> | SNMP agent |
axSysAverageCpuUsage<p>Update: 60</p> |
System Temperature | <p>A10-AX-MIB::axSysHwPhySystemTemp The physical system temperature in Celsius.</p> | SNMP agent |
axSysHwPhySystemTemp<p>Update: 60</p> |
Speed of FAN #2 | <p>A10-AX-MIB::axSysHwFan2Speed The fan2’s speed.</p> | SNMP agent |
axSysHwFan2Speed<p>Update: 300</p> |
Total memory | <p>A10-AX-MIB::axSysMemoryTotal The total memory(KB).</p> | SNMP agent |
axSysMemoryTotal<p>Update: 3600</p> |
Speed of FAN #1 | <p>A10-AX-MIB::axSysHwFan1Speed The fan1’s speed.</p> | SNMP agent |
axSysHwFan1Speed<p>Update: 300</p> |
Used memory | <p>A10-AX-MIB::axSysMemoryUsage The usage memory(KB).</p> | SNMP agent |
axSysMemoryUsage<p>Update: 300</p> |
Data CPU Usage (5 sec) | <p>A10-AX-MIB::axSysAverageDataCpuUsage The average data CPU usage in last 5 seconds.</p> | SNMP agent |
axSysAverageDataCpuUsage<p>Update: 60</p> |
Serial Number | <p>A10-AX-MIB::axSysSerialNumber The system serial number.</p> | SNMP agent |
axSysSerialNumber<p>Update: 86400</p> |
Status of Right or Upper Power Supply | <p>A10-AX-MIB::axSysUpperOrRightPowerSupplyStatus The upper/right power supply status.</p> | SNMP agent |
axSysUpperOrRightPowerSupplyStatus<p>Update: 60</p> |
Firmware Version | <p>A10-AX-MIB::axSysFirmwareVersion The system firmware version.</p> | SNMP agent |
axSysFirmwareVersion<p>Update: 86400</p> |
Free Disk Space | <p>A10-AX-MIB::axSysDiskFreeSpace The free space of the disk in MB.</p> | SNMP agent |
axSysDiskFreeSpace<p>Update: 300</p> |
Status of Left or Lower Power Supply | <p>A10-AX-MIB::axSysLowerOrLeftPowerSupplyStatus The lower/left power supply status.</p> | SNMP agent |
axSysLowerOrLeftPowerSupplyStatus<p>Update: 60</p> |
Control CPU Usage (5 sec) | <p>A10-AX-MIB::axSysAverageControlCpuUsage The average control CPU usage in last 5 seconds.</p> | SNMP agent |
axSysAverageControlCpuUsage<p>Update: 60</p> |
Status of Power Supply “$1” | <p>A10-AX-MIB::axPowerSupplyStatus The power supply status.</p> | SNMP agent |
axPowerSupplyStatus[”{#SNMPVALUE}”]<p>Update: 30</p><p>LLD</p> |
Speed of FAN “$1” | <p>A10-AX-MIB::axFanSpeed The fan speed.</p> | SNMP agent |
axFanSpeed[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p> |
Status of “$1” FAN | <p>A10-AX-MIB::axFanStatus Fan status: 0: Failed, 4: OK-fixed/high, 5: OK-low/med, 6: OK-med/med, 7: OK-med/high, -2: not ready, -1: unknown.</p> | SNMP agent |
axFanStatus[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p> |
Status of Power Supply Voltage “$1” | <p>A10-AX-MIB::axPowerSupplyVoltageStatus The status of the indexed system power supply voltage. This is only supported for the platform where the sensor data is available.</p> | SNMP agent |
axPowerSupplyVoltageStatus[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
FAN “{#SNMPVALUE}” is failed | <p>-</p> | <p>Expression: {Template_A10_AX_Series:axFanStatus[”{#SNMPVALUE}”].last()}=0</p><p>Recovery expression: </p> | high |
Power Supply “{#SNMPVALUE}” is absent | <p>-</p> | <p>Expression: {Template_A10_AX_Series:axPowerSupplyStatus[”{#SNMPVALUE}”].last()}=2</p><p>Recovery expression: </p> | warning |
Power Supply “{#SNMPVALUE}” is off | <p>-</p> | <p>Expression: {Template_A10_AX_Series:axPowerSupplyStatus[”{#SNMPVALUE}”].last()}=0</p><p>Recovery expression: </p> | warning |
Power Supply Voltage “{#SNMPVALUE}” is invalid | <p>-</p> | <p>Expression: {Template_A10_AX_Series:axPowerSupplyVoltageStatus[”{#SNMPVALUE}”].last()}=0</p><p>Recovery expression: </p> | average |
Power Supply “{#SNMPVALUE}” is absent (LLD) | <p>-</p> | <p>Expression: {Template_A10_AX_Series:axPowerSupplyStatus[”{#SNMPVALUE}”].last()}=2</p><p>Recovery expression: </p> | warning |
Power Supply “{#SNMPVALUE}” is off (LLD) | <p>-</p> | <p>Expression: {Template_A10_AX_Series:axPowerSupplyStatus[”{#SNMPVALUE}”].last()}=0</p><p>Recovery expression: </p> | warning |
FAN “{#SNMPVALUE}” is failed (LLD) | <p>-</p> | <p>Expression: {Template_A10_AX_Series:axFanStatus[”{#SNMPVALUE}”].last()}=0</p><p>Recovery expression: </p> | high |
Power Supply Voltage “{#SNMPVALUE}” is invalid (LLD) | <p>-</p> | <p>Expression: {Template_A10_AX_Series:axPowerSupplyVoltageStatus[”{#SNMPVALUE}”].last()}=0</p><p>Recovery expression: </p> | average |
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Power Supply Voltage Discovery | <p>A10-AX-MIB::axPowerSupplyVoltageDescription The description of the system power supply voltage.</p> | SNMP agent |
axPowerSupplyVoltageDescription<p>Update: 300</p> |
FAN Discovery | <p>A10-AX-MIB::axFanName The system fan name.</p> | SNMP agent |
axFanName<p>Update: 300</p> |
Power Supply Discovery | <p>A10-AX-MIB::axPowerSupplyName The pwer supply name.</p> | SNMP agent |
axPowerSupplyName<p>Update: 300</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
System Temperature | <p>A10-AX-MIB::axSysHwPhySystemTemp The physical system temperature in Celsius.</p> | SNMP agent |
axSysHwPhySystemTemp<p>Update: 60</p> |
Free Disk Space | <p>A10-AX-MIB::axSysDiskFreeSpace The free space of the disk in MB.</p> | SNMP agent |
axSysDiskFreeSpace<p>Update: 300</p> |
Total Disk Space | <p>A10-AX-MIB::axSysDiskTotalSpace The total space of the disk in MB.</p> | SNMP agent |
axSysDiskTotalSpace<p>Update: 3600</p> |
Speed of FAN #3 | <p>A10-AX-MIB::axSysHwFan3Speed The fan3’s speed</p> | SNMP agent |
axSysHwFan3Speed<p>Update: 300</p> |
Control CPU Usage (5 sec) | <p>A10-AX-MIB::axSysAverageControlCpuUsage The average control CPU usage in last 5 seconds.</p> | SNMP agent |
axSysAverageControlCpuUsage<p>Update: 60</p> |
Status of Left or Lower Power Supply | <p>A10-AX-MIB::axSysLowerOrLeftPowerSupplyStatus The lower/left power supply status.</p> | SNMP agent |
axSysLowerOrLeftPowerSupplyStatus<p>Update: 60</p> |
Used memory | <p>A10-AX-MIB::axSysMemoryUsage The usage memory(KB).</p> | SNMP agent |
axSysMemoryUsage<p>Update: 300</p> |
Serial Number | <p>A10-AX-MIB::axSysSerialNumber The system serial number.</p> | SNMP agent |
axSysSerialNumber<p>Update: 86400</p> |
CPU Usage (5 sec) | <p>A10-AX-MIB::axSysAverageCpuUsage The average CPU usage in last 5 seconds.</p> | SNMP agent |
axSysAverageCpuUsage<p>Update: 60</p> |
Speed of FAN #1 | <p>A10-AX-MIB::axSysHwFan1Speed The fan1’s speed.</p> | SNMP agent |
axSysHwFan1Speed<p>Update: 300</p> |
Status of Right or Upper Power Supply | <p>A10-AX-MIB::axSysUpperOrRightPowerSupplyStatus The upper/right power supply status.</p> | SNMP agent |
axSysUpperOrRightPowerSupplyStatus<p>Update: 60</p> |
Total memory | <p>A10-AX-MIB::axSysMemoryTotal The total memory(KB).</p> | SNMP agent |
axSysMemoryTotal<p>Update: 3600</p> |
Speed of FAN #2 | <p>A10-AX-MIB::axSysHwFan2Speed The fan2’s speed.</p> | SNMP agent |
axSysHwFan2Speed<p>Update: 300</p> |
Data CPU Usage (5 sec) | <p>A10-AX-MIB::axSysAverageDataCpuUsage The average data CPU usage in last 5 seconds.</p> | SNMP agent |
axSysAverageDataCpuUsage<p>Update: 60</p> |
Firmware Version | <p>A10-AX-MIB::axSysFirmwareVersion The system firmware version.</p> | SNMP agent |
axSysFirmwareVersion<p>Update: 86400</p> |
Status of Power Supply Voltage “$1” | <p>A10-AX-MIB::axPowerSupplyVoltageStatus The status of the indexed system power supply voltage. This is only supported for the platform where the sensor data is available.</p> | SNMP agent |
axPowerSupplyVoltageStatus[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p> |
Speed of FAN “$1” | <p>A10-AX-MIB::axFanSpeed The fan speed.</p> | SNMP agent |
axFanSpeed[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p> |
Status of “$1” FAN | <p>A10-AX-MIB::axFanStatus Fan status: 0: Failed, 4: OK-fixed/high, 5: OK-low/med, 6: OK-med/med, 7: OK-med/high, -2: not ready, -1: unknown.</p> | SNMP agent |
axFanStatus[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p> |
Status of Power Supply “$1” | <p>A10-AX-MIB::axPowerSupplyStatus The power supply status.</p> | SNMP agent |
axPowerSupplyStatus[”{#SNMPVALUE}”]<p>Update: 30</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
FAN “{#SNMPVALUE}” is failed | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axFanStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | high |
Power Supply “{#SNMPVALUE}” is absent | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyStatus[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> | warning |
Power Supply “{#SNMPVALUE}” is off | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | warning |
Power Supply Voltage “{#SNMPVALUE}” is invalid | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyVoltageStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | average |
Power Supply Voltage “{#SNMPVALUE}” is invalid (LLD) | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyVoltageStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | average |
FAN “{#SNMPVALUE}” is failed (LLD) | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axFanStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | high |
Power Supply “{#SNMPVALUE}” is absent (LLD) | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyStatus[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> | warning |
Power Supply “{#SNMPVALUE}” is off (LLD) | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | warning |
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Power Supply Voltage Discovery | <p>A10-AX-MIB::axPowerSupplyVoltageDescription The description of the system power supply voltage.</p> | SNMP agent |
axPowerSupplyVoltageDescription<p>Update: 300</p> |
FAN Discovery | <p>A10-AX-MIB::axFanName The system fan name.</p> | SNMP agent |
axFanName<p>Update: 300</p> |
Power Supply Discovery | <p>A10-AX-MIB::axPowerSupplyName The pwer supply name.</p> | SNMP agent |
axPowerSupplyName<p>Update: 300</p> |
Name | Description | Type | Key and additional info |
---|---|---|---|
System Temperature | <p>A10-AX-MIB::axSysHwPhySystemTemp The physical system temperature in Celsius.</p> | SNMP agent |
axSysHwPhySystemTemp<p>Update: 60</p> |
Free Disk Space | <p>A10-AX-MIB::axSysDiskFreeSpace The free space of the disk in MB.</p> | SNMP agent |
axSysDiskFreeSpace<p>Update: 300</p> |
Total Disk Space | <p>A10-AX-MIB::axSysDiskTotalSpace The total space of the disk in MB.</p> | SNMP agent |
axSysDiskTotalSpace<p>Update: 3600</p> |
Speed of FAN #3 | <p>A10-AX-MIB::axSysHwFan3Speed The fan3’s speed</p> | SNMP agent |
axSysHwFan3Speed<p>Update: 300</p> |
Control CPU Usage (5 sec) | <p>A10-AX-MIB::axSysAverageControlCpuUsage The average control CPU usage in last 5 seconds.</p> | SNMP agent |
axSysAverageControlCpuUsage<p>Update: 60</p> |
Status of Left or Lower Power Supply | <p>A10-AX-MIB::axSysLowerOrLeftPowerSupplyStatus The lower/left power supply status.</p> | SNMP agent |
axSysLowerOrLeftPowerSupplyStatus<p>Update: 60</p> |
Used memory | <p>A10-AX-MIB::axSysMemoryUsage The usage memory(KB).</p> | SNMP agent |
axSysMemoryUsage<p>Update: 300</p> |
Serial Number | <p>A10-AX-MIB::axSysSerialNumber The system serial number.</p> | SNMP agent |
axSysSerialNumber<p>Update: 86400</p> |
CPU Usage (5 sec) | <p>A10-AX-MIB::axSysAverageCpuUsage The average CPU usage in last 5 seconds.</p> | SNMP agent |
axSysAverageCpuUsage<p>Update: 60</p> |
Speed of FAN #1 | <p>A10-AX-MIB::axSysHwFan1Speed The fan1’s speed.</p> | SNMP agent |
axSysHwFan1Speed<p>Update: 300</p> |
Status of Right or Upper Power Supply | <p>A10-AX-MIB::axSysUpperOrRightPowerSupplyStatus The upper/right power supply status.</p> | SNMP agent |
axSysUpperOrRightPowerSupplyStatus<p>Update: 60</p> |
Total memory | <p>A10-AX-MIB::axSysMemoryTotal The total memory(KB).</p> | SNMP agent |
axSysMemoryTotal<p>Update: 3600</p> |
Speed of FAN #2 | <p>A10-AX-MIB::axSysHwFan2Speed The fan2’s speed.</p> | SNMP agent |
axSysHwFan2Speed<p>Update: 300</p> |
Data CPU Usage (5 sec) | <p>A10-AX-MIB::axSysAverageDataCpuUsage The average data CPU usage in last 5 seconds.</p> | SNMP agent |
axSysAverageDataCpuUsage<p>Update: 60</p> |
Firmware Version | <p>A10-AX-MIB::axSysFirmwareVersion The system firmware version.</p> | SNMP agent |
axSysFirmwareVersion<p>Update: 86400</p> |
Status of Power Supply Voltage “$1” | <p>A10-AX-MIB::axPowerSupplyVoltageStatus The status of the indexed system power supply voltage. This is only supported for the platform where the sensor data is available.</p> | SNMP agent |
axPowerSupplyVoltageStatus[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p> |
Speed of FAN “$1” | <p>A10-AX-MIB::axFanSpeed The fan speed.</p> | SNMP agent |
axFanSpeed[”{#SNMPVALUE}”]<p>Update: 300</p><p>LLD</p> |
Status of “$1” FAN | <p>A10-AX-MIB::axFanStatus Fan status: 0: Failed, 4: OK-fixed/high, 5: OK-low/med, 6: OK-med/med, 7: OK-med/high, -2: not ready, -1: unknown.</p> | SNMP agent |
axFanStatus[”{#SNMPVALUE}”]<p>Update: 60</p><p>LLD</p> |
Status of Power Supply “$1” | <p>A10-AX-MIB::axPowerSupplyStatus The power supply status.</p> | SNMP agent |
axPowerSupplyStatus[”{#SNMPVALUE}”]<p>Update: 30</p><p>LLD</p> |
Name | Description | Expression | Priority |
---|---|---|---|
FAN “{#SNMPVALUE}” is failed | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axFanStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | high |
Power Supply “{#SNMPVALUE}” is absent | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyStatus[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> | warning |
Power Supply “{#SNMPVALUE}” is off | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | warning |
Power Supply Voltage “{#SNMPVALUE}” is invalid | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyVoltageStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | average |
Power Supply Voltage “{#SNMPVALUE}” is invalid (LLD) | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyVoltageStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | average |
FAN “{#SNMPVALUE}” is failed (LLD) | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axFanStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | high |
Power Supply “{#SNMPVALUE}” is absent (LLD) | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyStatus[”{#SNMPVALUE}”])=2</p><p>Recovery expression: </p> | warning |
Power Supply “{#SNMPVALUE}” is off (LLD) | <p>-</p> | <p>Expression: last(/Template_A10_AX_Series/axPowerSupplyStatus[”{#SNMPVALUE}”])=0</p><p>Recovery expression: </p> | warning |