Getting cases from worldometers.info and plotting on Zabbix
Gets statistics of COVID19 - CORONAVIRUS and presents to JSON and Zabbix
Updated template and code to work with current worldometers.info results (as they changed slightly) and the old code was not working properly.
I forked the original repo from Rickk Barbosa and uploaded changes there, all the credits goes to him.
If you have any suggestion please do send your feedback to improve!
Christian Reizlein
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Covid19 - Selected Countries | <p>-</p> | External check |
covid19_affectedcountries.py<p>Update: 1h</p> |
Name | Description | Type | Key and additional info | |
---|---|---|---|---|
Covid19 - Total of Active Cases | <p>-</p> | Dependent item |
covid19.data[ActiveCases]<p>Update: 0</p> | |
Covid19 - Total Recovered | <p>-</p> | Dependent item |
covid19.data[TotalRecovered]<p>Update: 0</p> | |
Covid19 - Total of Deaths | <p>-</p> | Dependent item |
covid19.data[TotalDeaths]<p>Update: 0</p> | |
Covid19 - Total of New Deaths | <p>-</p> | Dependent item |
covid19.data[NewDeaths]<p>Update: 0</p> | |
Covid19 - Total of Serious,Critical Cases | <p>-</p> | Dependent item |
covid19.data[Serious]<p>Update: 0</p> | |
Covid19 Full Info | <p>-</p> | External check |
covid19_status.py<p>Update: 60m</p> | |
Covid19 - Total Cases per 1M habitants | <p>-</p> | Dependent item |
covid19.data[CasesperMillion]<p>Update: 0</p> | |
Covid19 - Total Cases | <p>-</p> | Dependent item |
covid19.data[TotalCases]<p>Update: 0</p> | |
Covid19 - Total of New Cases | <p>-</p> | Dependent item |
covid19.data[NewCases]<p>Update: 0</p> | |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - TotalCases | <p>-</p> | Calculated |
covid19.data[”{#COUNTRY_NAME}”, TotalCases]<p>Update: 30m</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - ActiveCases | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, ActiveCases]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - Cases per Million habitants | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, CasesperMillion]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - NewCases | <p>-</p> | Dependent item |
covid19.data[ “{#COUNTRY_NAME}”, NewCases]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - NewDeaths | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, NewDeaths]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - Serious,Critical | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, Serious]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - TotalDeaths | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, TotalDeaths]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - TotalRecovered | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, TotalRecovered]<p>Update: 0</p><p>LLD</p> |
There are no triggers in this template.
Getting cases from worldometers.info and plotting on Zabbix
Gets statistics of COVID19 - CORONAVIRUS and presents to JSON and Zabbix
Updated template and code to work with current worldometers.info results (as they changed slightly) and the old code was not working properly.
I forked the original repo from Rickk Barbosa and uploaded changes there, all the credits goes to him.
If you have any suggestion please do send your feedback to improve!
Christian Reizlein
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Covid19 - Selected Countries | <p>-</p> | External check |
covid19_affectedcountries.py<p>Update: 1h</p> |
Name | Description | Type | Key and additional info | |
---|---|---|---|---|
Covid19 - Total of Active Cases | <p>-</p> | Dependent item |
covid19.data[ActiveCases]<p>Update: 0</p> | |
Covid19 - Total of New Cases | <p>-</p> | Dependent item |
covid19.data[NewCases]<p>Update: 0</p> | |
Covid19 - Total Recovered | <p>-</p> | Dependent item |
covid19.data[TotalRecovered]<p>Update: 0</p> | |
Covid19 Full Info | <p>-</p> | External check |
covid19_status.py<p>Update: 60m</p> | |
Covid19 - Total Cases per 1M habitants | <p>-</p> | Dependent item |
covid19.data[CasesperMillion]<p>Update: 0</p> | |
Covid19 - Total of New Deaths | <p>-</p> | Dependent item |
covid19.data[NewDeaths]<p>Update: 0</p> | |
Covid19 - Total Cases | <p>-</p> | Dependent item |
covid19.data[TotalCases]<p>Update: 0</p> | |
Covid19 - Total of Serious,Critical Cases | <p>-</p> | Dependent item |
covid19.data[Serious]<p>Update: 0</p> | |
Covid19 - Total of Deaths | <p>-</p> | Dependent item |
covid19.data[TotalDeaths]<p>Update: 0</p> | |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - TotalCases | <p>-</p> | Calculated |
covid19.data[”{#COUNTRY_NAME}”, TotalCases]<p>Update: 30m</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - ActiveCases | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, ActiveCases]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - Cases per Million habitants | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, CasesperMillion]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - NewCases | <p>-</p> | Dependent item |
covid19.data[ “{#COUNTRY_NAME}”, NewCases]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - NewDeaths | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, NewDeaths]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - Serious,Critical | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, Serious]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - TotalDeaths | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, TotalDeaths]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - TotalRecovered | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, TotalRecovered]<p>Update: 0</p><p>LLD</p> |
There are no triggers in this template.
Getting cases from worldometers.info and plotting on Zabbix
Gets statistics of COVID19 - CORONAVIRUS and presents to JSON and Zabbix
Updated template and code to work with current worldometers.info results (as they changed slightly) and the old code was not working properly.
I forked the original repo from Rickk Barbosa and uploaded changes there, all the credits goes to him.
If you have any suggestion please do send your feedback to improve!
Christian Reizlein
There are no macros links in this template.
There are no template links in this template.
Name | Description | Type | Key and additional info |
---|---|---|---|
Covid19 - Selected Countries | <p>-</p> | External check |
covid19_affectedcountries.py<p>Update: 1h</p> |
Name | Description | Type | Key and additional info | |
---|---|---|---|---|
Covid19 - Total of Active Cases | <p>-</p> | Dependent item |
covid19.data[ActiveCases]<p>Update: 0</p> | |
Covid19 - Total of New Cases | <p>-</p> | Dependent item |
covid19.data[NewCases]<p>Update: 0</p> | |
Covid19 - Total Recovered | <p>-</p> | Dependent item |
covid19.data[TotalRecovered]<p>Update: 0</p> | |
Covid19 Full Info | <p>-</p> | External check |
covid19_status.py<p>Update: 60m</p> | |
Covid19 - Total Cases per 1M habitants | <p>-</p> | Dependent item |
covid19.data[CasesperMillion]<p>Update: 0</p> | |
Covid19 - Total of New Deaths | <p>-</p> | Dependent item |
covid19.data[NewDeaths]<p>Update: 0</p> | |
Covid19 - Total Cases | <p>-</p> | Dependent item |
covid19.data[TotalCases]<p>Update: 0</p> | |
Covid19 - Total of Serious,Critical Cases | <p>-</p> | Dependent item |
covid19.data[Serious]<p>Update: 0</p> | |
Covid19 - Total of Deaths | <p>-</p> | Dependent item |
covid19.data[TotalDeaths]<p>Update: 0</p> | |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - TotalCases | <p>-</p> | Calculated |
covid19.data[”{#COUNTRY_NAME}”, TotalCases]<p>Update: 30m</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - ActiveCases | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, ActiveCases]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - Cases per Million habitants | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, CasesperMillion]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - NewCases | <p>-</p> | Dependent item |
covid19.data[ “{#COUNTRY_NAME}”, NewCases]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - NewDeaths | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, NewDeaths]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - Serious,Critical | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, Serious]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - TotalDeaths | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, TotalDeaths]<p>Update: 0</p><p>LLD</p> |
[ {#COUNTRY_NAME} | {#COUNTRY_IBAN} ] - TotalRecovered | <p>-</p> | Dependent item |
covid19.data[”{#COUNTRY_NAME}”, TotalRecovered]<p>Update: 0</p><p>LLD</p> |
There are no triggers in this template.