Monitoring bcmstat 0.5.4 or greater. https://github.com/MilhouseVH/bcmstat
The Git repo can be found here.
This template will monitor Raspberry Pi’s (only tested RPI4) via SSH using the bcmstat utility which must be v0.5.4 or better.
~Stack~
There are no macros links in this template.
| Name |
|---|
| Template App SSH Service |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| CPU0 % used | <p>-</p> | Dependent item |
cpu0<p>Update: 0</p> |
| CPU Speed | <p>-</p> | Dependent item |
CPUMHz<p>Update: 0</p> |
| GPU Memory Free | <p>-</p> | Dependent item |
gpumem<p>Update: 0</p> |
| bcmstat | <p>Absolutely requires bcmstat.sh v0.5.4+. Anything before this doesn’t have the J option and my workaround was crazy janky.</p> | SSH agent |
ssh.run[bcmstat_{HOST.NAME}]<p>Update: 8s</p> |
| CPU Memory Free | <p>-</p> | Dependent item |
cpumem<p>Update: 0</p> |
| H264 Speed | <p>-</p> | Dependent item |
H264Mhz<p>Update: 0</p> |
| CPU2 % used | <p>-</p> | Dependent item |
cpu2<p>Update: 0</p> |
| GPU Speed | <p>-</p> | Dependent item |
GPUMhz<p>Update: 0</p> |
| TX Bytes per second | <p>-</p> | Dependent item |
txbps<p>Update: 0</p> |
| CPU3 % used | <p>-</p> | Dependent item |
cpu3<p>Update: 0</p> |
| CPU1 % used | <p>-</p> | Dependent item |
cpu1<p>Update: 0</p> |
| RX Bytes per second | <p>-</p> | Dependent item |
rxbps<p>Update: 0</p> |
| IRQ per second | <p>Interrupt requests per second</p> | Dependent item |
IRQs<p>Update: 0</p> |
| Core Temp | <p>-</p> | Dependent item |
CoreTemp<p>Update: 0</p> |
There are no triggers in this template.
Monitoring bcmstat 0.5.4 or greater. https://github.com/MilhouseVH/bcmstat
The Git repo can be found here.
This template will monitor Raspberry Pi’s (only tested RPI4) via SSH using the bcmstat utility which must be v0.5.4 or better.
~Stack~
There are no macros links in this template.
| Name |
|---|
| Template App SSH Service |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| CPU3 % used | <p>-</p> | Dependent item |
cpu3<p>Update: 0</p> |
| GPU Memory Free | <p>-</p> | Dependent item |
gpumem<p>Update: 0</p> |
| Core Temp | <p>-</p> | Dependent item |
CoreTemp<p>Update: 0</p> |
| H264 Speed | <p>-</p> | Dependent item |
H264Mhz<p>Update: 0</p> |
| GPU Speed | <p>-</p> | Dependent item |
GPUMhz<p>Update: 0</p> |
| CPU Memory Free | <p>-</p> | Dependent item |
cpumem<p>Update: 0</p> |
| TX Bytes per second | <p>-</p> | Dependent item |
txbps<p>Update: 0</p> |
| CPU2 % used | <p>-</p> | Dependent item |
cpu2<p>Update: 0</p> |
| RX Bytes per second | <p>-</p> | Dependent item |
rxbps<p>Update: 0</p> |
| CPU0 % used | <p>-</p> | Dependent item |
cpu0<p>Update: 0</p> |
| IRQ per second | <p>Interrupt requests per second</p> | Dependent item |
IRQs<p>Update: 0</p> |
| CPU Speed | <p>-</p> | Dependent item |
CPUMHz<p>Update: 0</p> |
| bcmstat | <p>Absolutely requires bcmstat.sh v0.5.4+. Anything before this doesn’t have the J option and my workaround was crazy janky.</p> | SSH agent |
ssh.run[bcmstat_{HOST.NAME}]<p>Update: 8s</p> |
| CPU1 % used | <p>-</p> | Dependent item |
cpu1<p>Update: 0</p> |
There are no triggers in this template.
Monitoring bcmstat 0.5.4 or greater. https://github.com/MilhouseVH/bcmstat
The Git repo can be found here.
This template will monitor Raspberry Pi’s (only tested RPI4) via SSH using the bcmstat utility which must be v0.5.4 or better.
~Stack~
There are no macros links in this template.
| Name |
|---|
| Template App SSH Service |
There are no discovery rules in this template.
| Name | Description | Type | Key and additional info |
|---|---|---|---|
| CPU3 % used | <p>-</p> | Dependent item |
cpu3<p>Update: 0</p> |
| GPU Memory Free | <p>-</p> | Dependent item |
gpumem<p>Update: 0</p> |
| Core Temp | <p>-</p> | Dependent item |
CoreTemp<p>Update: 0</p> |
| H264 Speed | <p>-</p> | Dependent item |
H264Mhz<p>Update: 0</p> |
| GPU Speed | <p>-</p> | Dependent item |
GPUMhz<p>Update: 0</p> |
| CPU Memory Free | <p>-</p> | Dependent item |
cpumem<p>Update: 0</p> |
| TX Bytes per second | <p>-</p> | Dependent item |
txbps<p>Update: 0</p> |
| CPU2 % used | <p>-</p> | Dependent item |
cpu2<p>Update: 0</p> |
| RX Bytes per second | <p>-</p> | Dependent item |
rxbps<p>Update: 0</p> |
| CPU0 % used | <p>-</p> | Dependent item |
cpu0<p>Update: 0</p> |
| IRQ per second | <p>Interrupt requests per second</p> | Dependent item |
IRQs<p>Update: 0</p> |
| CPU Speed | <p>-</p> | Dependent item |
CPUMHz<p>Update: 0</p> |
| bcmstat | <p>Absolutely requires bcmstat.sh v0.5.4+. Anything before this doesn’t have the J option and my workaround was crazy janky.</p> | SSH agent |
ssh.run[bcmstat_{HOST.NAME}]<p>Update: 8s</p> |
| CPU1 % used | <p>-</p> | Dependent item |
cpu1<p>Update: 0</p> |
There are no triggers in this template.