Add new listing Add Category
Description This is the template for Zabbix providing S.M.A.R.T. monitoring for HDD using smartctl utility. LLD is used for disks discovery. Dependent items feature is used for bulk data gathering in Zabbix 3.4+. Only devices with SMART enabled ...
[SNMP v2c] summary values, triggers, autodiscover items and triggers for Disks, Fans, File Systems and Temperature Sensors. You will need the default Template SNMP Generic and setup Data Domain-Value Mapping (https://www.zabbix.org/wiki/Data_Domain-Value ...
Monitor NETGEAR ReadyNAS storage devices via SNMP. This template was developed for the ReadyNAS 316. It monitors these items: diskState diskTemperature fanRPM fanStatus volumeFreeSpace volumeSize volumeStatus Appropriate triggers for each it ...
This template will allow you to easily monitor and graph a TrueNAS/FreeNAS server including ZFS ARC stats. This requires TrueNAS/FreeNAS 9.3 or above. You will also need to create a Zabbix macro named which contains your SNMP community name. The FREENAS ...
Template for Nimble storage, giving overall performance data and per volume performance data. Linkes to the icmp and snmp interfaces template. I started creating it on ZAbbix 2.4 and later upgraded to 3 so it should work on 2.4 as well.
Monitor SMART overall-health self-assessment of storage devices. Included are a BASH script for running smartctl and parsing its output, along with a template with items for various drive names.Add this UserParameter to /etc/zabbix/zabbix_agentd.conf Us ...
Using SNMP, no MIBs required, OIDs used. I updated the existing NetApp template with Autodiscover for SnapVault Relationships, check their Lagtime and trigger if it over 25h. That can be specified over a Macro. Also included: Performance Values for FC, ...
Powershell script that can be used to monitoring StarWind Virtual SAN. Zabbix's Low-level Discovery (LLD) protocol are supported. Can be obtained perfomance data (IOPs, Bandwith, CPU/RAM usage) and moreover - defragmentation percent, deduplication ratio ...
A fork of grundic/zabbix-disk-performance Changes: Add disk utilization (in %, like iostat) Add average queue size (like iostat) Add average read/write time (in ms) (zabbix calculated item) Add a screen template for all disks in host Ignore partit ...
Monitoring Template for Infortrend ES-DS10xx ES-DS20xx ES-DS30xx Series Build on: ITF1.40A08.MIB Features: Disk -> Discovery , Trigger Volume -> Discovery , Trigger, Graphs System -> Trigger
Based on / inspired by Rick van Vliet's Nimble Storage Template. Only tested on version 2.3.15.0-352557-opt of the Nimble software. Features: 16 regular items and 3 graphs. 50 item prototypes, 7 trigger prototypes and 6 graph prototypes. Links Zab ...
Fujitsu RAID Server Template Developed on Zabbix 3.4 for a Fujitsu Primergy RX350-S8. Contains basic Logical and Physical drive checks using the SNMPv2 agent. Is it perfect? No. Is it complete? No. Is it free to use? Yes. We couldn't find any alternati ...
Created this template to help monitor our physical drives, temperature, and system for Pivot3 vSTAC Watch. - Drive status - Temperature - Fans - Power supply - Nodes You'll need to enable SNMP via the vSTAC Manager Suite, for this to work. Created ...
Template containing items available for the device. Includes RAID monitoring, drives, interfaces, Fan, Voltage, etc. MIB USED: - IOMEGANAS-MIB - HOST-RESOURCES-MIB - SNMPV2MIB Template items configured for use with SNMPv3 (authNoPr ...
Created for this Type of Tera Station: TS4500R Items for all 4 Harddisk with Value Mapping Disk Status (in Array or Standalone) Disk SMART Status (with Trigger) Array Capacity Status (Raidlevel) with Value Mapping Failover Partner ...
This is based on https://share.zabbix.com/storage-devices/freenas-snmp-w-zfs-statsIt has more graphs and triggers. It uses the OID as zabbix was having issues parsing the MIB. Please Note: For ZVols, ZPools and Datasets the data is multiplied by 4096 und ...
