Features: SNMP

This is Zabbix 2.0+ template for current models of APC Network Management Cards with or without enviromental sensor. Supports: AP9630 AP9631 (same as above but with env sensor) Includes 19 items, 4 applications, 13 triggers Monitors power parameters li ...

Category:APC
Type
Min Zabbix version2.0.x

A10交换机模板 制作的时候没考虑到国际化,只能给中文用户使用了 部分翻译可能有误,欢迎提交pr给我 注意:制作的时候使用到了valuemaps,请到下面的链接处下载valuemaps.sql跟mappings.sql导入。 github:https://github.com/0312birdzhang/Template-SNMP-A10  

Category:A10
Type
Min Zabbix version2.4.x

Don't install any Zabbix modules, scripts. Just start new container and you can monitoring all Docker containers on the host. docker run \ --name=zabbix-agent-xxl \ -h `hostname` \ -p 10050:10050 \ -v /:/rootfs \ -e "ZA_Server=" \ -d moni ...

Category:Installers
Min Zabbix version2.2.x

Official OS Linux Template by SNMP from Zabbix distribution

Type
Min Zabbix version3.0.x

Official template from Zabbix distribution to discover network interfaces by SNMP

Category:SNMP Devices
Type
Min Zabbix version3.0.x

This template is for the monitoring of Juniper EX series switching hardware via SNMP. It requires no additional files or components - just add the template and you're done. Monitors the following items: Device availability (ping check) Alarm status ...

Category:Juniper
Type
Min Zabbix version2.2.x

This template is for the monitoring of Juniper SRX series firewall hardware via SNMP. It requires no additional files or components - just add the template and you're done. Monitors the following items: Device availability (ping check) Alarm statu ...

Category:Juniper
Type
Min Zabbix version2.2.x

Template for DVB/S satellite receiver Scopus IRD-2900 series. I guess it should fit new Harmonic ProView as well. Uses SNMP data only. Monitored items: Viterbi Bit Error Rate, Carrier/Noise ratio, signal Eb/N0 measurement, Link Margin, overall Si ...

Category:Unsorted
Type
Min Zabbix version2.4.x

templates was tested for Zabbix 3.0.1 you also need Fibre Channel Switch MIB = SW.mib (v7.4.1b_all_mibs.tar.gz) This template is distributed under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 ...

Category:Brocade
Type
Min Zabbix version3.0.x

Template for Nimble storage, giving overall performance data and per volume performance data. Linkes to the icmp and snmp interfaces template. I started creating it on ZAbbix 2.4 and later upgraded to 3 so it should work on 2.4 as well.

Category:Nimble Storage
Type
Min Zabbix version3.0.x

Working on all Mikrotik routers, but not all position are used by each router.   Many of position like: 3.3 voltage 5 voltage 12 voltage Active fan Board temperature Core voltage CPU frequency CPU temperature Current DHCP leases Fan Speed 1 ...

Category:Mikrotik
Type
Min Zabbix version3.0.x

# H3C 无线控制器### 功能- CPU、内存使用率- 序列号- 流量- 各种认证协议在先用户数量- 在线AP数- DHCP地址池发现,地址池满报警- AP发现,AP用户数,AP在线时间监控,AP断线报警- 一张聚合图形### 宏- : SNMP v2 团体字- : 地址池阈值### 其他- CPU、内存的硬件序号因设备型号而定,需要按照型号不同进行调整   fix:修正了链接模板后重复应用集无法导入的问题。

Category:Other
Type
Min Zabbix version3.0.x

Zabbix template for COVER UPS No MIBs required! tested with model PMR 6kV, should work with other models too (and probably with more chinease made UPS that partialy use RFC-1628) only basic items, some triggers and graphs added as well. Created i ...

Category:Power (UPS)
Type
Min Zabbix version3.0.x

A change made of template made by Rubens Urquisa e Josué Campelo  All nobreaks SMS with Net Adapter II, Input voltage information, frequency, temperature, battery charge.  Triggers activate Work with Mono and Tri voltages (Tested with Sinus Double Blac ...

Category:Power (UPS)
Type
Min Zabbix version3.0.x

Based on official MIB from vendor (they done some realy weird stuff this time). Checked on couple of local single and stacked devices. Basic system Items, Triggers and Graphs.

Category:Other
Type
Min Zabbix version3.2.x

Updated! Fixed an incorrect OID and refined one of the graphs. This template was made from scratch for a SU20KRT8 (Using the newest Tripplite MIBs. Zabbix devs, come on and write MIB ingestion into the GUI already.). However, it should support any type o ...

Category:Power (UPS)
Type
Min Zabbix version3.2.x

UPDATE: Uploaded V2 to fix one of the power ratings that was the wrong OID. It was collecting watts incorrectly. All fixed now! This APC Template contains outlet discovery and should work with any managed or switched APC PDU. Contains sane triggers, loa ...

Category:APC
Type
Min Zabbix version3.2.x

Simple SNMPv1 template for Delta UPS with LLD for lines.Tested on Zabbix 3.0 but should works on older versions. Required extra configuration: Macro for UPS-MIB

Category:Power (UPS)
Type
Min Zabbix version2.2.x

This EMC Isilon OneFS template was built from scratch by myself from the latest Isilon MIB's. !NOTE! SOME ISILONS DO NOT DO WELL WITH BULK SNMP REQUESTS!!!! If you notice flapping supported items, make sure bulk requests is off on your hosts. It contai ...

Category:EMC
Type
Min Zabbix version3.2.x

NetApp cDot Template. Tested on cDot 8.3.x and 9.x with zabbix 3.2.1. If you modify the template Header it should be possible to Import it to zabbix 2.x. Following stuff is checked with SNMP and triggers are enabled: Cluster Status HDD Status (failed ...

Category:NetAPP
Type
Min Zabbix version3.2.x