Categories

Ruckus Zone Director 9.5 Tested with Zabbix 3.2.7 Ruckus Zone Director 9.5 Template. Tested with objects ID: SNMPv2-SMI::enterprises.25053.3.1.5.15 SNMPv2-SMI::enterprises.25053.3.1.5.3 SNMPv2-SMI::enterprises.25053.3.1.5.2 .1.3.6.1.4.1.25053.3.1.5.15 ...

Category:Ruckus
Type
Min Zabbix version3.2.x

Based on official MIB from vendor (they done some realy weird stuff this time). Checked on couple of local single and stacked devices. Basic system Items, Triggers and Graphs.

Category:Other
Type
Min Zabbix version3.2.x

Built on 3.2, this template supports the following SNMP OIDs for monitoring of DSL stats   ADSL-LINE-MIB::adslAtucCurrSnrMgn ADSL-LINE-MIB::adslAtucCurrAtn ADSL-LINE-MIB::adslAtucCurrOutputPwr ADSL-LINE-MIB::adslAtucCurrAttainableRate ADSL-LINE-MIB: ...

Category:Other
Type
Min Zabbix version3.2.x

Sonicwall NSA2600 Template 

Category:Sonicwall
Type
Min Zabbix version2.4.x

This will work on NSA 3x00 and 4x00 series firewalls.  Derive form the 3600/400 one that is in Portuguese.  This one is in English.

Category:Sonicwall
Type
Min Zabbix version3.0.x

Uses SNMP LLD to discover proprietary Cisco SNMP CPU and Memory counters, assign triggers and create graphs

Category:Cisco
Min Zabbix version2.0.x

Cisco Small Business SG500/SG500X switch. General device Items. LLD for Network, Fan and Temperature sensors (if any). Stacking device information (id, serial, uptime).   ciscoEnvMonState

Category:Cisco
Type
Min Zabbix version2.4.x

OID for monitoring traffic  This it work >>> SNMPv1 IfOutOctets.1     /  1.3.6.1.2.1.2.2.1.16.49  (49 - port №1) ifInOctets.1      /  1.3.6.1.2.1.2.2.1.10.49   (49 - port №1)   last port Ethernet (24 port) -  74 IfOutOctets.24     /  1.3.6 ...

Category:Cisco
Type
Min Zabbix version2.2.x

Version for Zabbix 3.4 (maybe will work on earlier versions, not tested) working on snmp base: *CPU loading *Port status *Incoming speed *Outcoming speed *Uptime *Graphs for port utilization

Category:Cisco
Type
Min Zabbix version3.4.x

Switch Cisco Gerenciável SG300-28 – Gigabit Ethernet 28 portas

Category:Cisco
Type
Min Zabbix version3.4.x

Simple template for: Cisco SG220-26 Port Status, Port Traffic In, Port Traffic Out, and System Uptime. Hardware webpage: goo.gl/7zdRSN

Category:Cisco
Type
Min Zabbix version4.0.x

Items for device performance and alarm states, Discovery rule for interfaces (Discards, Errors and Bytes). I use a regexp to filter the interfaces, generic interfaces included, please adapt for more exotic interfaces. Tested on SRX 100, SRX 220 and SRX 24 ...

Category:Juniper
Min Zabbix version2.0.x

This template is for Juniper SSG and SRX series. It uses SNMP and autodiscovery to discover network interfaces, tunnels, policies and more things. Thanks to Pavel Hofer for excelent work! We use this template without any problems on SSG550m.Do not forget ...

Category:Juniper
Type
Min Zabbix version2.4.x

Simple adoptation to 3.x ++ add value mappings Original was downloaded from github OSPF-MIB is needed

Category:Generic
Type
Min Zabbix version3.0.x

Template for a SG5428-G. Not verified on other devices.

Category:TP-Link
Type
Min Zabbix version3.0.x

48 FE ports and 4 Gigabit ports - Items (In/Out interface traffic, uptime,port status ) and Triggers

Category:Other
Min Zabbix version2.0.x

Uses SNMP LLD to discover Hub, Switch and Router interfaces, assign triggers and create graphs

Category:Other
Min Zabbix version2.0.x

Uses SNMP LLD to discover OSPF protocol-specific information and assign triggers. Requires creating Value Mappings for OSPF Admin Status, Area Status and Neighbor State MIB Values before uploading the Template

Category:Other
Min Zabbix version2.0.x

Zabbix 2.x Juniper SA template with 7 items, 2 graphs & 7 triggers (I use it on SA-2500 model, but it should work on all models). Link to pdf with more info: https://zabbix.org/mw/images/7/7e/Juniper_SA_template.pdf

Category:Other
Min Zabbix version2.0.x

I found this on the net ages ago. Unsure of how complete it is.

Category:Other
Min Zabbix version2.0.x