Network Devices: All Listings 

Filter listings...

Ruckus ZD1200 Template (adaptable to other ZD appliances, see notes) tested on 3.2, but minimum version should be 2.0 as SNMP LLD and trigger dependencies are are available since this version Tested on ZAbbix 3.2.4 Allow monitoring of ZD1200 and asso ...

Category:Network Devices
Type
Min Zabbix version2.0.x

Alcatel-Lucent Enterprise OmniSwitch AOS Release 8.x This template allows to monitor Alcatel-Lucent Enterprise OmniSwitch running AOS Release 8.x via SNMPv3. It is possible that the template also works for SNMPv1/v2c, but I'll not put any efforts in te ...

Category:Network Devices
Type
Min Zabbix version3.4.x

Overview The L2 Discovery Module for LLDP provides a function to read neighbor devices information of LLDP held by network equipment from Zabbix using SNMP.   Features  Zabbix can monitor neighbor devices information of LLDP (data link layer)  Temp ...

Category:Network Devices
Type
Min Zabbix version3.0.x

Items & Triggers CPU Fan speed Temperature Memory Session Basic SNMP Network Device: Number of network interfaces NOTE Need a template (Basic SNMP Network Device) for some items.

Category:Network Devices
Type
Min Zabbix version3.0.x

olt_zte scripts para busca do sinal do cliente de onu zte modelo f601 e envio para zabbix COMO UTILIZAR crie uma estrutura de Pastas: mkdir PON_ #N = numero de portas da olt

Category:Network Devices
Min Zabbix version3.2.x

Apresentando o template para o dispositivo NetProbe PlusPara utilizar o template em seu Zabbix, siga os passos abaixo:1. Instale o MIB da Volt em seu servidor Zabbix, ele pode ser obtido acessando a interface web do dispositivo. Se preferir, você pode bai ...

Category:Network Devices
Type
Min Zabbix version3.4.x

I created this template to learn my Force10 mibs. It will add every interface the switch has, including stacked units. It has been tested on S50's and C300's and should work fine on any Force10's that are similar.

Category:D-Link
Min Zabbix version2.0.x

NEED in Macros HOST

Category:D-Link
Type
Min Zabbix version2.2.x

Category:D-Link
Type
Min Zabbix version2.4.x

Uses SNMP LLD to discover interfaces. Items (In/Out interface traffic and other statistics, uptime, sysDescr, sysName), Screen and Graph. Trigger up/down interface.

Category:D-Link
Type
Min Zabbix version3.0.x

Based on official D-link MIB. Generic device data, not all figures available though (can't find CPU / RAM usage, probably it was removed by vendor). Auto-discovery for main Network and PoE data. There is other data that can be fetched from switch, but I ...

Category:D-Link
Type
Min Zabbix version2.4.x

Based on official D-link MIB. Generic device data, not all figures available though (can't find CPU / RAM usage, probably it was removed by vendor). LLD Network interfaces. In general will work for rev C1 devices also. But better use specific template. ...

Category:D-Link
Type
Min Zabbix version2.4.x

Based on MIB from vendor. Checked on local single and stacked DGS/DWS-3120-xx devices. Main system Items, Ttiggers and Graphs. LLD Network interfaces. LLD Memory, Temperature and Fan values (though D-link does something weird with fan and temperature O ...

Category:D-Link
Type
Min Zabbix version2.4.x

Based on official MIB from vendor (they done some realy weird stuff this time). Checked on couple of local single and stacked devices. Basic system Items, Triggers and Graphs. LLD for Network Interfaces. LLD for Fan status (only this values was availab ...

Category:D-Link
Type
Min Zabbix version2.4.x

Based on official D-link MIB. Generic device data, not all figures available though (can't find CPU / RAM usage, probably was removed by vendor). LLD Network interfaces. Do not use with PoE version - vendor changed many OIDs.

Category:D-Link
Type
Min Zabbix version2.4.x