HP OfficeConnect 19XX

SNMPV2 Works on Office Connect Switches191019201950 Low Level Discovery for: CPU Fan Status Interfaces (Ports) - includes Rx/Tx/Errors/Status Mac Address Memory Stats PSU Tempature Sensors Entity - includes Serial Number, Model Name, Firmware, ...

Cisco SLA udp-jitter

command IPSLA on router: ip sla 1111  udp-jitter 1.1.1.1 49333 source-ip 2.2.2.2 codec g729a  tag Region ip sla schedule 1111 life forever start-time now   template will get all information like "sh ip sla statistics", don't forget use tag.   ...

Eltek Flatpack S

Basic monitoring template for Eltek Flatpack / SmartPack S. 48VDC power system. 2 inverters. One batttery set. No solar power. No generator. Template is for Zabbix 4.4.0rc1 Items Power System CompanyPower System SitePower System ModelPower System Seria ...

Witek (Wireless-Tek)

This if template for Wi-Tek switch 8GE and 2SFP ports If you want to use this template for switch with another count of interfaces please change formula items(Total Traffic).

Juniper QFX5110 SNMPv3

This is a custom QFX5110 SNMPv3 template. More features will be added once I need them.   Do not forget the add the macro's: User: Password:

HP LaserJet Flow E57540 Supplies

This template reports information on supplies and impressions. Created in v4.2x but may work on earlier versions. UPDATE: Updated value type to Numeric (float)

HP LaserJet Flow E87640 Supplies

This template provides supply information such as toner and impressions. Created in v4.2x but may work on earlier versions. UPDATE: Updated value type to Numeric (float)

HP LaserJet M452 and M477 Supplies

This template provides supply information such as toner and impressions. Created in v4.2.x but may work with earlier versions as well.

Juniper MX SNMPv3

I didn't see an Juniper MX template yet that was build for SNMPv3. I will update the template when I find new values that seem important.   Do not forget the add the macro's: User: Password:

Primequest 3800E

Value mapping   Primequest 3800E - CPU 1 - unknown 2 - not-present 3 - ok 4 - disabled 5 - error 6 - failed 7 - missing-termination 8 - prefailed-warning   Primequest 3800E - DIMM 1 - unknown 2 - not-present 3 - ok 4 - failed-disabled 5 - ...

Spectralink DECT Server

Need to install Spectralink MIBs 11 items trigger *Base station is DOWN*

Juniper EX SNMPv3

Do not forget the add the macro's: User: Password:

Watchguard SNMP (Post v12.0)

An updated Watchguard template that uses the updated SNMP OIDs after the v12.0 update.   Template pulls: Active ConnectionsAvailable MemoryCPU UtilizationDevice DescriptionDevice LocationDevice NameDevice UptimeFree MemoryTotal Bytes ReceivedTotal Byte ...

Huawei Quidway s3900 series switch template

Template for Huawei Quidway s3900 switches. General information - Uptime, system name, number of interfaces. Interfaces - operational and administrative status of ports, errors TX and RX on every port, Bytes TX and RX on every port, triggers on CRC errors ...

Huawei Quidway s5600 series switches template

Template for Huawei Quidway s5600 switches. General information - Uptime, system name, number of interfaces. Interfaces - operational and administrative status of ports, errors TX and RX on every port, Bytes TX and RX on every port, triggers on CRC errors ...

Socomec Netys RT - SNMP V1

This templase include some info and trigger such as: - Battery - Temperature - Output - Alarms   You just edit the SNMP_COMMUNITY value into the template

Ubiquiti UniFi devices (UBNT-UniFi-MIB) ^Popular

SNMPv2 template for monitoring Ubiquiti UniFi devices exposing UBNT-UniFi-MIB (The UniFi MIB module for Ubiquiti Networks, Inc.) entities.It supports low-level discovery for network, radio and virtual access point interfaces. Refer to the README for a li ...

UCD-SNMP-MIB load average monitoring

SNMPv2 template for monitoring the load average of a host exposing the UCD-SNMP-MIB (University of California, Davis MIB) "laTable" table.Refer to the README for a list of features, supported items, triggers, graphs, macros and installation instructions. ...