Add new listing
Template simples para monitoramento de: tensão de entrada, Tensão da Bateria e Temperatura. Acompanha triggers.
Monitoring humidity and temperature
Monitoring with items -Your triggers may vary
Zabbix Template & external scripts for Vutlan(SkyControl) EMS / Zertico Implemented: LLD and control state of door / dry contacts and iButton sensor; LLD and control state of humidity / smoke / temperature / voltage / water leak sensors; LLD and ...
LLD of Sensors (Only Temperature and humidity) Trigger Prototypes for recommended 45RH% - 55RH% humidity and 20°C - 24°C Temperature Graph Prototypes for Temperature and Humidity. Triggers names contain the last value that cause the trigger so you c ...
This template gets data from APC environment monitor via SNMP. It has a macro for high temperature. This is used in the triggers.
Zabbix template for APC NetBotz 355 Wall Monitor This template discovers temperature, humidity, air flow, camera, dewpoint sensors Based on template found at https://www.zabbix.com/forum/showthread.php?t=50527
This template is designed for all SensorProbe devices from the vendor AKCP. All connected sensors (humidity and temperature) are automaticly discovered in this template. This template is tested whith SensorProbe2 and SensorProbe4.
I made a simple template for the APC Netbotz AP9340, i currently have 2 (RJ45) temperature sensors connected and retrieving the temp and humidity from both.
An Zabbix "agent" firmware for Arduino Implemented: A few Zabbix agent commands (v4 protocol supported); Wraps a lot of Arduino Language functions; ...
Critical Facilities Monitoring with ServersCheck.com Template for the SensorGateway product which includes: Applications (3): General - 5 items Network - 4 items Sensor - 4 items General (5): productname - Name of product. e.g. SensorGateway e ...
Monitoring template for poseidon device. Tested on Zabbix 3.4 https://www.hw-group.com/cs/devices/monitoring
These scripts enable reading of emonTH 433MHz - Temperature & Humidity nodes sensor values from Raspberry having RFM69Pi 433Mhz Raspberry Pi Base Station Receiver Board to Zabbix. The repository contains init.d script, custom user parameters scripts ...
Template para monitoramento de temperatura e umidade do equipamento SE-10 e SW-10, fabricado pela DCM Tech. Alertas de temperatura para 30°C e 40°C. Gráficos para temperatura do local, da sonda e de umidade. Testado no Zabbix 3.0, mas deverá func ...
This template is forked from the IT_Watchdog_100 for use with the IT Watchdog 15. This template includes graphing for the Dew Point, Humidity, and Temperate and notifications on temperatures above 83 and 85 degrees (these can easily be changed to suit ...
Automatically detects Nature Remo with LLD and generates temperature / humidity / illuminance items. Please put the access token obtained at https://home.nature.global in the host macro . You can download userparameter_natureremo.conf and remo-json.sh f ...
LLD of Sensors (Currently Temperature and Humidity & Wireless Tempurature and Humidity) Trigger Prototypes for recommended Humidity and Tempurature based on Netbotz configured thresholds Graph Prototypes for Temperature and Humidity
Page 1 of 2
