Juniper EX Series

This template is for the monitoring of Juniper EX series switching hardware via SNMP. It requires no additional files or components - just add the template and you're done. Monitors the following items: Device availability (ping check) Alarm status ...

Juniper SRX Series ^Popular

This template is for the monitoring of Juniper SRX series firewall hardware via SNMP. It requires no additional files or components - just add the template and you're done. Monitors the following items: Device availability (ping check) Alarm statu ...

Template SNMP Juniper MX discovery: int, RE, BGP4 ipv4 ... ^Popular

Template support discovery: interfaces, RE, BGP4 peers with ipv4 and ipv6 addresses.    Items BGP   * Discovery: Administrative status of a peer   * Discovery: Operational status of a peer   * Discovery: Established time for a peer   * Discovery: Re ...

Juniper SRX SNMPv3

I didn't see an SRX template yet that was build for SNMPv3. I will update the template when I find new values that seem important.   Kudos to the creator of this template for providing a good baseline: https://share.zabbix.com//network_devices/juniper/ ...

Juniper Total

This template is a smattering of a few templates combined with some custom discovery rules. It has been tested to work with most Juniper switches and firewalls. It uses the standard SNMP root for all discovery, so it works with most switch/router devices ...

Juniper QFX5200 SNMPv3

This is a custom QFX5200 SNMPv3 template. More features will be added once I need them.   Do not forget the add the macro's: User: Password:

Juniper EX

Items for device performance and alarm states, Discovery rule for interfaces (Discards, Errors and Bytes). I use a regexp to filter the interfaces, generic interfaces included, please adapt for more exotic interfaces. Tested on EX 4200 in virtual chassis.

SRX (Branch)

Items for device performance and alarm states, Discovery rule for interfaces (Discards, Errors and Bytes). I use a regexp to filter the interfaces, generic interfaces included, please adapt for more exotic interfaces. Tested on SRX 100, SRX 220 and SRX 24 ...

SNMP template is for Juniper SSG and SRX series.

This template is for Juniper SSG and SRX series. It uses SNMP and autodiscovery to discover network interfaces, tunnels, policies and more things. Thanks to Pavel Hofer for excelent work! We use this template without any problems on SSG550m.Do not forget ...

Juniper (Netscreen) Template

zbxJuniperNetscreen Zabbix template for Netscreen based Juniper devices, tested with Juniper SSG140. No MIBs required. Device status monitoring, with triggers Interfaces monitoring, with "Interface went down" trigger. VPN tunnels monitoring, with " ...

Juniper QFX5110 SNMPv3

This is a custom QFX5110 SNMPv3 template. More features will be added once I need them.   Do not forget the add the macro's: User: Password:

Juniper MX SNMPv3

I didn't see an Juniper MX template yet that was build for SNMPv3. I will update the template when I find new values that seem important.   Do not forget the add the macro's: User: Password:

Juniper EX SNMPv3

Do not forget the add the macro's: User: Password:

Juniper BGP

Juniper BGP template A template to pull BGP peer data from SNMP for Zabbix. Should work with any Juniper device that supports BGP4-V2-MIB-JUNIPER Installing Import the template file under Configuration > Templates > Import. Item prototypes (per ...

Juniper-optical-interface-snpmv2

  2020-06-09-update The template was modified suitable for version 3.4 ~~~~~~~~~~~~~~~~~ 2020-03-20-update Add TxLaserPower item,If you need please download "template-add_TxLaserPower.xml" TxLaserPower-Trigger,set Tx threshold  on -10dbm or 0db ...