ZBX-CISCO-BGP4 ============== This template use the BGP4-MIB to discover and manage both IPv4 and VPNv4 neighbors on Cisco devices. Items ----- * Discovery: administrative status of a peer * Discovery: operational status of a peer * Discovery: established time for a peer * Discovery: remote AS for a peer * Discovery: accepted prefixes for IPv4 and/or VPNv4 peers * Discovery: advertised prefixes for IPv4 and/or VPNv4 peers * Discovery: denied prefixes for IPv4 and/or VPNv4 peers * Discovery: prefixes limit for IPv4 and/or VPNv4 peers * Discovery: suppressed prefixes for IPv4 and/or VPNv4 peers Triggers -------- * **[DISASTER]** => Discovery: BGP peer that remote AS match {$BGP_PEER_AS} macro is down * **[AVERAGE]** => Discovery: BGP peer that remote AS didn't match {$BGP_PEER_AS} macro is down * **[AVERAGE]** => Discovery: accepted prefixes for IPv4 as reached the maximum limit * **[AVERAGE]** => Discovery: accepted prefixes for VPNv4 as reached the maximum limit * **[AVERAGE]** => Discovery: IPv4 BGP peer has lost more than 20% of prefixes * **[AVERAGE]** => Discovery: VPNv4 BGP peer has lost more than 20% of prefixes * **[INFORMATION]** => Discovery: no prefixes receive for IPv4 peer * **[INFORMATION]** => Discovery: no prefixes receive for VPNv4 peer Graphs ------ * Discovery: BGP informations for IPv4 peer * Discovery: BGP informations for VPNv4 peer Installation ------------ 1. Add a value mapping named `ciscoBgpPeerAdminStatus` with the following values: * 1 => stop * 2 => start 2. Add a value mapping named `ciscoBgpPeerState` with the following values: * 1 => idle * 2 => connect * 3 => active * 4 => opensent * 5 => openconfirm * 6 => established 3. Install [`as.name`](https://github.com/jjmartres/Zabbix/tree/master/zbx-scripts/as.name) in the **ExternalScripts** directory of your Zabbix server and/or proxy. Check your `zabbix_server.conf` and/or `zabbix_proxy.conf` if in doubt. 4. Then `chmod a+x as.name` 5. Import **zbx-cisco-bgp4.xml** file into Zabbix. 6. Add to your host the **{$SNMP_COMMUNITY}** macro with your SNMP community as value. 7. Add to your host the **{$BGP_PEER_AS}** macro with your list BGP peer remote AS as value (ex: ASN1|ASN2|ASN3) 8. Associate **ZBX-CISCO-BGP4** template to the host. ### Requirements This template was tested for Zabbix 2.0.0 and higher.There are no additional requirements. License ------- This template is distributed under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. ### Copyright Copyright (c) Jean-Jacques Martrès ### Authors Jean-Jacques Martrès (jjmartres |at| gmail |dot| com)