This template allows to monitor Alcatel-Lucent Enterprise OmniSwitch running AOS Release 8.x via SNMPv3. It is possible that the template also works for SNMPv1/v2c, but I'll not put any efforts in testing this (as there is no good reason not to use SNMPv3).

Features

• Automatic Discovery of all Virtual Chassis (VC) elements
• CPU (1 Min avg, 1 Hr avg, 1 Day avg => Graph + Trigger for all VC elements)
• Memory (1 Min avg, 1 Hr avg, 1 Day avg => Graph + Trigger for all VC elements)
• RX/TX Load (1 Min avg, 1 Hr avg, 1 Day avg => Graph + Trigger for all VC elements)
• Switch Temperature (Last reading => Graph + Trigger for all VC elements)
• System
  • Device Contact
  • Device Description
  • Device Location
  • Device Name
  • Device Uptime
  • Device type/model for all VC elements
  • Device serial number for all VC elements
  • Device Flash Freespace => Graph + Trigger for all VC elements
• Discovery
  • All Ethernet Ports (regardless of state up/down)
  • All IP Interfaces
  • Associated In/OutOctets + Graphs based on Ethernet Port (ifDescription / IP-Interface name)

SNMPv3 configuration on ALE OmniSwitch AOS Release 8.x

-> user snmpv3 password snmpv3password sha+aes read-only all

Template configuration

• Open "Configuration -> Templates -> Template Alcatel-Lucent Enterprise OmniSwitch AOS 8.x -> Macros" and set the three entries (see screenshot for reference)

Feedback / Things to note

• Feedback is welcome, but please note that this is/was an effort during my free time
• Reach out to me via Twitter @BennyE_HH or via GitHub (with the associated account to this article)
• As per my knowledge it is not yet possible to generate a graph via LLD that will contain several sub-elements (e.g. all slots CPU/Memory etc) => see ZBXNEXT-927 for details
• As of 15.04. this template has been tested on a VC of 2x OS6860

Changelog

• 15.04.2018 - Initial release