Server Hardware

Categories
HP (16)
Huawei (0)
Huawei (1)
IBM (0)
SGI (0)
Tyan (0)

Add new listing Add Category

MD Soft RAID monitoring template for Zabbix Using sysfs for monitoring of Linux Soft RAID aka MD Tested on Zabbix Version 3.0 See more at GitHub FEATURES LLD for auto detecting RAID Monitoring of total number of disks, number of degraded disks, sy ...

Type
Min Zabbix version2.0.x

This template integrates NVidia SMI for a single graphics card with Zabbix. The template adds monitoring of: GPU Utilisation GPU Power Consumption GPU Memory (Used, Free, Total) GPU Temperature GPU Fan Speed The following agent parameters can b ...

Type
Vendor
Min Zabbix version2.2.x

A Zabbix template that detects the number of Nvidia GPUs and then creates items and graphs for them, as well as a few triggers, including for temperature, fan speed, power draw, free, used and total memory.Intended for mining monitoring.Tested on Zabbix-s ...

Type
Vendor
Min Zabbix version3.0.x

IPMI HW status [Fan, Temperature, Voltage], Triggers [Temperature]. (The ASUS ASMB4-iKVM/ASMB4-SOL PLUS is an Intelligent Platform Management Interface (IPMI) 2.0-compliant board that allows you to monitor, control, and manage a remote server from the lo ...

Type
Vendor
Min Zabbix version3.0.x

Features: LLD for fans LLD for disk drives LLD for logical disks LLD for PSU  Tested on: Cisco UCS C220 M3 Cisco UCS C220 M4

Type
Vendor
Min Zabbix version3.0.x

IBM server status of System State, Discovery Temperature sensor (with trigger), Discovery Fan sensor and speed, Discovery Voltage via SNMP and IMM/IMM2. Copy getFanSpeed.rb to "externalscripts" on Zabbix server, and install Ruby. Read README.TXT before u ...

Vendor
Min Zabbix version2.0.x

IBM server status of HDD, memory banks and power supplies via SNMP and IBM Director Agent. Tested on IBM System x3650/x3550/x3550m2/x3550m3, eServer Series 345/346. Read README.TXT before using. Only for Zabbix 2.2.x or higher!

Vendor
Min Zabbix version2.2.x

IMM

Server hw status from IMM via SNMP. Work on my x3550m3 and x3650m2

Vendor
Min Zabbix version2.0.x

Server hw status via Insight Manager. Works on my PLML350.

Vendor
Min Zabbix version2.0.x

Supermicro A+ 2042G server

Vendor
Min Zabbix version2.0.x

IPMI HW status [Health, Fan, Power, Temperature, Voltage], Triggers [Temperature, Power, Fans, Voltage]

Vendor
Min Zabbix version2.0.x

IPMI HW status [Health, Fan, Power, Temperature, Voltage], Triggers [Temperature, Power, Fans, Voltage]

Vendor
Min Zabbix version2.0.x

IPMI HW status [Power, Temperature, Voltage], Triggers [Temperature, Power, Voltage]

Vendor
Min Zabbix version2.0.x

IPMI HW status [Health, Drives, Fan, Power, Temperature], Triggers [Health, Memory]

Vendor
Min Zabbix version2.0.x

SNMP Disk IO Popular

Template for Disk IO data gathering on Zabbix via SNMP

Type
Vendor
Min Zabbix version2.4.x

DN2800MT: Need zabbix-agent installed, using coretemp & winbond 83627ehf driver Load coretemp and w83627ehf modules in /etc/modules Based on BIOS values

Type
Vendor
Min Zabbix version2.4.x

D2500CC: Need zabbix-agent installed, using coretemp & winbond 83627uhg driver Load coretemp and w83627ehf modules in /etc/modules Based on BIOS values

Type
Vendor
Min Zabbix version2.4.x

IPMI sensors for SGI Altix C2108-G9 : +1.1 V, +1.8 V, +3.3 V, +3.3VSB, +5 V, +12 V, CPU1 DIMM, CPU1 DIMM VTT, CPU1 Temp, CPU1 Vcore, CPU2 DIMM, CPU2 DIMM VTT, CPU2 Temp, CPU2 Vcore, FAN 1, FAN 2, FAN 3, HT Voltage, Power, System Temp, VBAT   27/09/2016 ...

Type
Vendor
Min Zabbix version2.4.x

IPMI sensors for SGI Altix C2112-4G10: +1.1 V, +1.8 V, +3.3 V, +3.3VSB, +5 V, +12 V, CPU1 DIMM, CPU1 DIMM VTT, CPU1 Temp, CPU1 Vcore, CPU2 DIMM, CPU2 DIMM VTT, CPU2 Temp, CPU2 Vcore, FAN 1, FAN 2, HT Voltage, Power, System Temp, VBAT   27/09/2016: Som ...

Type
Vendor
Min Zabbix version2.4.x

Template IPMI Dell PowerEdge 2950  

Type
Vendor
Min Zabbix version3.2.x